Unisphere-Data-IP-TUNNEL-MIB
The Unisphere-Data-IP-TUNNEL-MIB provides management interfaces for monitoring IP tunnel configurations, status states, and traffic statistics on Unisphere Networks Inc. enterprise storage and networking appliances. It enables administrators to track tunnel establishment, packet throughput, and error counters to validate data path integrity within the storage area network infrastructure.
Imported Objects
Objects
19 total| Object Name |
|---|
usdIpTunnelMIBThe IP Tunnel MIB for the Unisphere Networks Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.51 |
usdIpTunnelInterfaceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.51.1 |
usdIpTunnelNextIfIndexCoordinate ifIndex value allocation for entries in usdIpTunnelIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro UsdNextIfIndex (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.51.1.1 |
usdIpTunnelInterfaceTableThis table contains entries of IP Tunnel interfaces. SEQUENCE OF UsdIpTunnelInterfaceEntry .1.3.6.1.4.1.4874.2.2.51.1.2 |
usdIpTunnelInterfaceEntryEach entry describes the characteristics of a single IP Tunnel interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/usdIfTable UsdIpTunnelInterfaceEntry .1.3.6.1.4.1.4874.2.2.51.1.2.1 |
usdIpTunnelIfIndexThe ifIndex of the IP tunnel interface. When creating entries in this table, suitable values for this object are determined by reading usdIpTunnelNextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.51.1.2.1.1 |
usdIpTunnelNameThe administratively assigned name for this IP Tunnel interface. Before configuring other tunnel attributes, IP tunnel has to be created with minimum attributes (tunnel name, mode and rowStatus).rw DisplayString .1.3.6.1.4.1.4874.2.2.51.1.2.1.2 |
usdIpTunnelModeThe configured mode for this IP Tunnel interface.rw Enumeration .1.3.6.1.4.1.4874.2.2.51.1.2.1.3 |
usdIpTunnelVirtualRouterThe transport virtual router associated with this IP tunnel interface. This object need not be set when creating row entries. Note that the default when this object is not specified is the router associated with the agent acting on the management request.rw UsdName (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.51.1.2.1.4 |
usdIpTunnelChecksumThe Tunnel checksum configuration for this entry. Setting this object to true(1) will enabled end-to-end checksumming and will cause the system to drop packets with bad checksums received on this interface. Setting this object to false(2) will disable this feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.51.1.2.1.5 |
usdIpTunnelMtuThe tunnel MTU.rw INTEGER (1024 ..10240) .1.3.6.1.4.1.4874.2.2.51.1.2.1.6 |
usdIpTunnelDestinationThe tunnel destination IP address.rw IpAddress .1.3.6.1.4.1.4874.2.2.51.1.2.1.7 |
usdIpTunnelSourceThe tunnel source IP address.rw IpAddress .1.3.6.1.4.1.4874.2.2.51.1.2.1.8 |
usdIpTunnelRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdIpTunnelIfRowStatus usdIpTunnelName usdIpTunnelMode In addition, when creating an entry the following conditions must hold: A value for usdIpTunnelIfIndex must have been determined previously, typically by reading usdIpTunnelNextIfIndex. Once created, the following objects may not be modified: usdIpTunnelName usdIpTunnelMode usdIpTunnelVirtualRouter A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.51.1.2.1.9 |
usdIpTunnelConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.51.2 |
usdIpTunnelCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.51.2.1 |
usdIpTunnnelComplianceThe compliance statement for entities that implement the Unisphere IP Tunnel MIB. Unknown .1.3.6.1.4.1.4874.2.2.51.2.1.1 |
usdIpTunnelGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.51.2.2 |
usdIpTunnelInterfaceGroupA collection of objects for managing IP Tunnel capabilities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.51.2.2.1 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module