Unisphere-Data-IP-PROFILE-MIB
AI MIB Summary
The Unisphere-Data-IP-PROFILE-MIB enables monitoring and configuration of IP network interface profiles, including address assignments, routing parameters, and protocol states, on Unisphere Networks Inc. hardware appliances.
The IP Profile MIB for the Unisphere Networks Inc. enterprise.
Main OID:
usdIpProfileMIB.1.3.6.1.4.1.4874.2.2.26
28
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
usdIpProfileMIBThe IP Profile MIB for the Unisphere Networks Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.26 |
usdIpProfileObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.26.1 |
usdIpProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.26.1.1 |
usdIpProfileTableThe entries in this table describe profiles for configuring IP interfaces. Entries in this table are created/deleted as a side-effect of corresponding operations to the usdProfileNameTable in the Unisphere-Data-PROFILE-MIB. SEQUENCE OF UsdIpProfileEntry .1.3.6.1.4.1.4874.2.2.26.1.1.1 |
usdIpProfileEntryA profile describing configuration of an IP interface. UsdIpProfileEntry .1.3.6.1.4.1.4874.2.2.26.1.1.1.1 |
usdIpProfileIdThe integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the usdProfileNameTable. Unsigned32 .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.1 |
usdIpProfileRowStatusControls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. The value of usdIpProfileId must match that of a profile name configured in usdProfileNameTable.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.2 |
usdIpProfileRouterNameThe virtual router to which an IP interface configured by this profile will be assigned, if other mechanisms do not otherwise specify a virtual router assignment.rw UsdName (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.3 |
usdIpProfileIpAddrAn IP address to be used by an IP interface configured by this profile. This object will have a value of 0.0.0.0 for an unnumbered interface.rw IpAddress .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.4 |
usdIpProfileIpMaskAn IP address mask to be used by an IP interface configured by this profile. This object will have a value of 0.0.0.0 for an unnumbered interface.rw IpAddress .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.5 |
usdIpProfileDirectedBcastEnableEnable/disable forwarding of directed broadcasts on this IP network interface.rw UsdEnable (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.6 |
usdIpProfileIcmpRedirectEnableEnable/disable transmission of ICMP Redirect messages on this IP network interface.rw UsdEnable (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.7 |
usdIpProfileAccessRouteEnable/disable whether a host route is automatically created for a remote host attached to an IP interface that is configured using this profile.rw UsdEnable (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.8 |
usdIpProfileMtuThe configured MTU size for this IP network interface. If set to zero, the default MTU size, as determined by the underlying network media, is used.rw Integer32(0 | 512..10240) .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.9 |
usdIpProfileLoopbackIfIndexFor unnumbered interfaces, the IfIndex of the IP loopback interface whose IP address is used as the source address for transmitted IP packets. A value of zero means the loopback interface is unspecified (e.g., when the interface is numbered).rwobsolete InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.10 |
usdIpProfileLoopbackThe number of the loopback interface, associated with the specified virtual router, whose IP address is used as the source address when transmitting IP packets on unnumbered remote access user links. For example, if the loopback interface for the associated router was configured via the console as 'loopback 2', this object would contain the integer value 2. A value of -1 indicates the loopback interface is unspecified, e.g., when the IP interface is numbered.rw Integer32(-1..2147483647) .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.11 |
usdIpProfileSetMapA bitmap representing which objects in this entry have been explicitly configured. See the definition of the UsdSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set). When a SET request does not explicitly configure UsdSetMap, bits in UsdSetMap are set as a side-effect of configuring other profile attributes in the same entry. If, however, a SET request explicitly configures UsdSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur. Once set, bits can only be cleared by explicitly configuring UsdSetMap.rw UsdSetMap (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.12 |
usdIpProfileSrcAddrValidEnableEnable/disable whether source addresses in received IP packets are validated. Validation is performed by looking up the source IP address in the routing database and determining whether the packet arrived on the expected interface; if not, the packet is discarded.rw UsdEnable (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.13 |
usdIpProfileMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.26.4 |
usdIpProfileMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.26.4.1 |
usdIpProfileComplianceObsolete compliance statement for systems supporting IP configuration profiles. This statement became obsolete when usdIpProfileLoopback replaced usdIpProfileLoopbackIfIndex.obsolete Unknown .1.3.6.1.4.1.4874.2.2.26.4.1.1 |
usdIpProfileCompliance1Obsolete compliance statement for systems supporting IP configuration profiles. This statement became obsolete when usdIpProfileRowStatus was deprecate and the usdIpProfileSetMap and usdIpProfileSrcAddrValidEnable objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.26.4.1.2 |
usdIpProfileCompliance2The compliance statement for systems supporting IP configuration profiles, incorporating UsdSetMap. Unknown .1.3.6.1.4.1.4874.2.2.26.4.1.3 |
usdIpProfileMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.26.4.2 |
usdIpProfileGroupAn obsolete collection of objects providing management of IP Profile functionality in a Unisphere product. This group became obsolete when usdIpProfileLoopback replaced usdIpProfileLoopbackIfIndex.obsolete Unknown .1.3.6.1.4.1.4874.2.2.26.4.2.1 |
usdIpProfileGroup1An obsolete collection of objects providing management of IP Profile functionality in a Unisphere product. This group became obsolete when usdIpProfileRowStatus was deprecate and the usdIpProfileSetMap and usdIpProfileSrcAddrValidEnable objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.26.4.2.2 |
usdIpProfileGroup2The basic collection of objects providing management of IP Profile functionality in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.26.4.2.3 |
usdIpProfileDeprecatedGroupDeprecated object providing management of IP Profile functionality in a Juniper product. This group has been deprecated but may still be supported on some implementations.deprecated Unknown .1.3.6.1.4.1.4874.2.2.26.4.2.4 |