Unisphere-Data-HDLC-CONF
The Unisphere-Data-HDLC-CONF MIB module defines agent capabilities for monitoring and managing High-Level Data Link Control (HDLC) interface configurations and operational states within EMC Unisphere Routing Switch hardware. It provides the necessary structure to track HDLC link status, protocol parameters, and error counters for serial WAN connectivity on these specific routing platforms.
Imported Objects
Objects
4 total| Object Name |
|---|
usdHdlcAgentThe agent capabilities definitions for the HDLC component of the SNMP agent in the Unisphere Routing Switch family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.18 |
usdHdlcAgentV1The MIB supported by the SNMP agent for the HDLC application in the Unisphere Routing Switch. These capabilities became obsolete when rsHdlcIfDataPolarity was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.18.1 |
usdHdlcAgentV2The MIB supported by the SNMP agent for the HDLC application in the Unisphere Routing Switch. These capabilities became obsolete when more objects were added. Unknown .1.3.6.1.4.1.4874.5.2.18.2 |
usdHdlcAgentV3The MIB supported by the SNMP agent for the HDLC application in the Unisphere Routing Switch. Unknown .1.3.6.1.4.1.4874.5.2.18.3 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module