Unisphere-Data-FRAME-RELAY-MIB
AI MIB Summary
The Unisphere-Data-FRAME-RELAY-MIB enables monitoring and management of Frame Relay virtual circuit states, PVC statistics, and interface parameters on Unisphere Networks Inc. hardware. This module provides access to specific counters for data transmission, error rates, and circuit status essential for maintaining legacy WAN connectivity.
The Frame Relay MIB for the Unisphere Networks Inc. enterprise.
Main OID:
usdFrameRelayMIB.1.3.6.1.4.1.4874.2.2.10
82
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
82 total| Object Name |
|---|
usdFrameRelayMIBThe Frame Relay MIB for the Unisphere Networks Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.10 |
usdFrObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.10.1 |
usdFrIfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.10.1.1 |
usdFrNextIfIndexCoordinate ifIndex value allocation for entries
in usdFrDlcmiTable.
A GET of this object returns the next available ifIndex
value to be used to create an entry in the associated
interface table; or zero, if no valid ifIndex value is
available. This object also returns a value of zero when
it is the lexicographic successor of a varbind presented
in an SNMP GETNEXT or GETBULK request, for which circumstance
it is assumed that ifIndex allocation is unintended.
Successive GETs will typically return different
values, thus avoiding collisions among cooperating
management clients seeking to create table entries
simultaneously.ro UsdNextIfIndex (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.10.1.1.1 |
usdFrDlcmiTableThe Parameters for the Data Link Connection Management
Interface for the frame relay service on this interface.
This table represents a superset of functionality specified in
RFC2115 FRAME-RELAY-DTE-MIB. In particular, it adds attributes
that permit the interface to operate as a network-side (DCE)
interface. SEQUENCE OF UsdFrDlcmiEntry .1.3.6.1.4.1.4874.2.2.10.1.1.2 |
usdFrDlcmiEntryThe Parameters for a particular Data Link Connection
Management Interface.
Creating/deleting entries in this table causes corresponding
entries for be created/deleted in ifTable/ifXTable/usdIfTable,
and usdFrDlcmiStatsTable.
Creating/deleting user-side (DTE) entries in this table also causes
coresponding entries to be created/deleted in RFC2115 frDlcmiTable.
The organization and definitions of objects in this table are
intentionally aligned closely to those in RFC2115. UsdFrDlcmiEntry .1.3.6.1.4.1.4874.2.2.10.1.1.2.1 |
usdFrDlcmiIfIndexThe ifIndex value of the corresponding ifEntry.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.1 |
usdFrDlcmiStateThis variable states which Data Link Connection
Management scheme is active (and by implication, what
DLCI it uses) on the Frame Relay interface.rw Enumeration .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.2 |
usdFrDlcmiAddressThis variable states which address format is in use on
the Frame Relay interface.rw Enumeration .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.3 |
usdFrDlcmiAddressLenThis variable states the address length in octets. In
the case of Q922 format, the length indicates the
entire length of the address including the control
portion.rw Enumeration .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.4 |
usdFrDlcmiPollingIntervalThis is the number of seconds between successive
status enquiry messages sent by the DTE.
Pertains to DTE/NNI operation only. This parameter can
be reconfigured only when the Frame Relay interface
is acting as a DTE or NNI.rw Integer32 .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.5 |
usdFrDlcmiFullEnquiryIntervalNumber of status enquiry intervals that pass before
issuance of a full status enquiry message.
Pertains to DTE/NNI operation only. This parameter can
be reconfigured only when the Frame Relay interface
is acting as a DTE or NNI.rw Integer32 .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.6 |
usdFrDlcmiErrorThresholdThe minimum number of errors that must be observed
within the number of events specified by usdFrDlcmiMonitoredEvents,
to declare the interface down.
'error' is lack of receipt of a Status, in response to an
issued Status Enquiry, within the Polling Interval (T391).
Pertains to DTE/NNI operation only. This parameter can
be reconfigured only when the Frame Relay interface
is acting as a DTE or NNI.rw Integer32 .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.7 |
usdFrDlcmiMonitoredEventsThe number of status polling intervals over which the
error threshold is counted. For example, if within
'MonitoredEvents' number of events the station receives
'ErrorThreshold' number of errors, the interface is
marked as down.
'status polling interval' is specified by
usdFrDlcmiPollingInterval.
Pertains to DTE/NNI operation only. This parameter can
be reconfigured only when the Frame Relay interface
is acting as a DTE or NNI.rw Integer32 .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.8 |
usdFrDlcmiMaxSupportedVCsThe maximum number of Virtual Circuits allowed for
this interface. Usually dictated by the Frame Relay
network.
In response to a SET, if a value less than zero or
higher than the agent's maximal capability is
configured, the agent should respond badValue.rw DLCI (FRAME-RELAY-DTE-MIB) .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.9 |
usdFrDlcmiMulticastThis indicates whether the Frame Relay interface is
using a multicast service.rw Enumeration .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.10 |
usdFrDlcmiStatusThis indicates the status of the Frame Relay interface
as determined by the performance of the dlcmi. If no
dlcmi is running, the Frame Relay interface will stay
in the running state indefinitely.ro Enumeration .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.11 |
usdFrDlcmiRowStatusControls creation/deletion of entries in this table
according to the RowStatus textual convention,
constrained to support the following values only:
createAndGo
destroy
To create an entry in this table, the following
entry objects MUST be explicitly configured:
usdFrDlcmiRowStatus
usdFrDlcmiState
usdFrDlcmiMaxSupportedVCs
usdFrDlcmiLowerIfIndex
usdFrDlcmiRole
In addition, when creating an entry the following
conditions must hold:
A value for usdFrDlcmiIndex must have been determined
previously, by reading usdFrNextIfIndex.
The interface identified by usdFrDlcmiLowerIfIndex
must exist, and must be an interface type that
permits layering of Frame Relay above it.
A corresponding entry in ifTable/ifXTable/usdIfTable is
created/destroyed as a result of creating/destroying an entry
in this table. If usdFrDlcmiRole is dte(0), a corresponding
entry is created/deleted in frDlcmiTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.12 |
usdFrDlcmiLowerIfIndexThe ifIndex of an interface over which this Frame Relay interface
is to be layered. A value of zero indicates no layering.
An implementation may choose to require that a nonzero value
be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.13 |
usdFrDlcmiRoleSpecifies the role this interface assumes with respect
to the remote end.
When acting as a DTE, the following objects are not relevant:
usdFrDlcmiDcePollingInterval
usdFrDlcmiDceErrorThreshold
usdFrDlcmiDceMonitoredEvents
When acting as a DCE, the following objects are not relevant:
usdFrDlcmiPollingInterval
usdFrDlcmiFullEnquiryInterval
usdFrDlcmiErrorThreshold
usdFrDlcmiMonitoredEventsrw Enumeration .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.14 |
usdFrDlcmiDcePollingIntervalThe number of seconds within which a DCE
expects to receive a Status Enquiry from the DTE.
This value corresponds to the T392 timer.
Pertains to DCE/NNI operation only. This parameter can
be reconfigured only when the Frame Relay interface
is acting as a DCE or NNI.rw Integer32 .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.15 |
usdFrDlcmiDceErrorThresholdThe minimum number of errors that must be observed
within the number of events specified by
usdFrDlcmiDceMonitoredEvents, to declare the interface down.
'error' is lack of receipt of a Status Enquiry within the
interval specified by usdFrDlcmiDcePollingInterval (T392).
Pertains to DCE/NNI operation only. This parameter can
be reconfigured only when the Frame Relay interface
is acting as a DCE or NNI.rw Integer32 .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.16 |
usdFrDlcmiDceMonitoredEventsThe number of DCE polling intervals over which
accumulated errors are counted against the threshold
specified in usdFrDlcmiDceErrorThreshold.
If, within this number of events, the number of errors
equals or exceeds the threshold, the interface is
declared down.
The 'DCE polling interval' is specified by
usdFrDlcmiDcePollingInterval.
Pertains to DCE/NNI operation only. This parameter can
be reconfigured only when the Frame Relay interface
is acting as a DCE or NNI.rw Integer32 .1.3.6.1.4.1.4874.2.2.10.1.1.2.1.17 |
usdFrDlcmiStatsTableThe statistics for the Data Link Connection Management
Interface for the frame relay service on this interface. SEQUENCE OF UsdFrDlcmiStatsEntry .1.3.6.1.4.1.4874.2.2.10.1.1.3 |
usdFrDlcmiStatsEntryThe statistics for a particular Data Link Connection
Management Interface.
Statistics are not relevant while the usdFrDlcmiState
has the value 'noLmiConfigured'.
The DTE statistics are relevant when the corresponding
usdFrDlcmiRole is DTE.
The DTE statistics are relevant when the corresponding
usdFrDlcmiRole is DCE. UsdFrDlcmiStatsEntry .1.3.6.1.4.1.4874.2.2.10.1.1.3.1 |
usdFrDlcmiStatsDteEnquiriesNumber of Status Enquiries sent (as DTE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.1 |
usdFrDlcmiStatsDteFullEnquiriesNumber of Full Enquiries sent (as DTE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.2 |
usdFrDlcmiStatsDteEnquiryResponsesNumber of Status Enquiry responses received (as DTE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.3 |
usdFrDlcmiStatsDteFullEnquiryResponsesNumber of Full Enquiry responses received (as DTE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.4 |
usdFrDlcmiStatsDteAsyncUpdatesNumber of Asynchronous Updates received (as DTE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.5 |
usdFrDlcmiStatsDteUnknownRxMessagesNumber of unknown messages received (as DTE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.6 |
usdFrDlcmiStatsDteLossOfSequencesNumber of times a discontinuity in sequence numbering of received
messages was detected (as DTE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.7 |
usdFrDlcmiStatsDteNoResponseTimeoutsNumber of timer expirations awaiting a Status message (as DTE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.8 |
usdFrDlcmiStatsDceEnquiriesNumber of Status Enquiries received (as DCE.)ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.9 |
usdFrDlcmiStatsDceFullEnquiriesNumber of Full Enquiries received (as DCE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.10 |
usdFrDlcmiStatsDceEnquiryResponsesNumber of Status Enquiry responses sent (as DCE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.11 |
usdFrDlcmiStatsDceFullEnquiryResponsesNumber of Full Enquiry responses sent (as DCE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.12 |
usdFrDlcmiStatsDceAsyncUpdatesNumber of Asynchronous Updates sent (as DCE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.13 |
usdFrDlcmiStatsDceUnknownRxMessagesNumber of unknown messages received (as DCE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.14 |
usdFrDlcmiStatsDceLossOfSequencesNumber of times a discontinuity in sequence numbering of received
messages was detected (as DCE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.15 |
usdFrDlcmiStatsDceNoResponseTimeoutsNumber of timer expirations awaiting a Status Enquiry (as DCE).ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.16 |
usdFrDlcmiStatsDiscontinuityTimeValue of sysUpTime at the most recent event that caused a
discontinuity in the monotonic operation of any of the
counters in this entry. Such disruption might be caused by:
Hardware insertion/removal.
Reconfiguration of usdFrDlcmiState.
Reconfiguration of usdFrDlcmiRole.
Conclusions can be drawn from successive polls of an entry's
counters only if the value of this object, simultaneously
retrieved in those polls, remains unchanged.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.10.1.1.3.1.17 |
usdFrCircuitTableA table containing information about specific Data Link Connections
(DLC) or virtual circuits.
This table mirrors the structure of RFC2115 FRAME-RELAY-DTE-MIB
frCircuitTable, for the purpose of enumerating circuits on both
DTE and DCE Frame Relay interfaces. SEQUENCE OF UsdFrCircuitEntry .1.3.6.1.4.1.4874.2.2.10.1.1.4 |
usdFrCircuitEntryThe information regarding a single Data Link Connection.
Discontinuities in the counters contained in this table are
indicated by the value in usdFrCircuitCreationTime. UsdFrCircuitEntry .1.3.6.1.4.1.4874.2.2.10.1.1.4.1 |
usdFrCircuitIfIndexThe ifIndex Value of the ifEntry this virtual circuit
is layered onto. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.1 |
usdFrCircuitDlciThe Data Link Connection Identifier for this virtual
circuit. DLCI (FRAME-RELAY-DTE-MIB) .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.2 |
usdFrCircuitStateIndicates whether the particular virtual circuit is
operational. In the absence of a Data Link Connection
Management Interface, virtual circuit entries (rows)
may be created by setting virtual circuit state to
'active', or deleted by changing Circuit state to
'invalid'.
Whether or not the row actually disappears is left to
the implementation, so this object may actually read as
'invalid' for some arbitrary length of time. It is
also legal to set the state of a virtual circuit to
'inactive' to temporarily disable a given circuit.
The use of 'invalid' is deprecated in this SNMP Version
2 MIB, in favor of usdFrCircuitRowStatus.rw Enumeration .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.3 |
usdFrCircuitReceivedFECNsNumber of frames received from the network indicating
forward congestion since the virtual circuit was
created. This occurs when the remote DTE sets the FECN
flag, or when a switch in the network enqueues the
frame to a trunk whose transmission queue is
congested.ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.4 |
usdFrCircuitReceivedBECNsNumber of frames received from the network indicating
backward congestion since the virtual circuit was
created. This occurs when the remote DTE sets the BECN
flag, or when a switch in the network receives the
frame from a trunk whose transmission queue is
congested.ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.5 |
usdFrCircuitSentFramesThe number of frames sent from this virtual circuit
since it was created.ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.6 |
usdFrCircuitSentOctetsThe number of octets sent from this virtual circuit
since it was created. Octets counted are the full
frame relay header and the payload, but do not include
the flag characters or CRC.ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.7 |
usdFrCircuitReceivedFramesNumber of frames received over this virtual circuit
since it was created.ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.8 |
usdFrCircuitReceivedOctetsNumber of octets received over this virtual circuit
since it was created. Octets counted include the full
frame relay header, but do not include the flag
characters or the CRC.ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.9 |
usdFrCircuitCreationTimeThe value of sysUpTime when the virtual circuit was
created, whether by the Data Link Connection Management
Interface or by a SetRequest.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.10 |
usdFrCircuitLastTimeChangeThe value of sysUpTime when last there was a change in
the virtual circuit statero TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.11 |
usdFrCircuitCommittedBurstThis variable indicates the maximum amount of data, in
bits, that the network agrees to transfer under normal
conditions, during the measurement interval.rw Integer32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.12 |
usdFrCircuitExcessBurstThis variable indicates the maximum amount of
uncommitted data bits that the network will attempt to
deliver over the measurement interval.
By default, if not configured when creating the entry,
the Excess Information Burst Size is set to the value
of ifSpeed.rw Integer32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.13 |
usdFrCircuitThroughputThroughput is the average number of 'Frame Relay
Information Field' bits transferred per second across a
user network interface in one direction, measured over
the measurement interval.
If the configured committed burst rate and throughput
are both non-zero, the measurement interval, T, is
T=usdFrCircuitCommittedBurst/usdFrCircuitThroughput.
If the configured committed burst rate and throughput
are both zero, the measurement interval, T, is
T=usdFrCircuitExcessBurst/ifSpeed.rw Integer32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.14 |
usdFrCircuitMulticastThis indicates whether this VC is used as a unicast VC
(i.e. not multicast) or the type of multicast service
subscribed torw Enumeration .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.15 |
usdFrCircuitTypeIndication of whether the VC was manually created
(static), or dynamically created (dynamic) via the data
link control management interface.ro Enumeration .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.16 |
usdFrCircuitDiscardsThe number of inbound frames dropped because of format
errors, or because the VC is inactive.ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.17 |
usdFrCircuitReceivedDEsNumber of frames received from the network indicating
that they were eligible for discard since the virtual
circuit was created. This occurs when the remote DTE
sets the DE flag, or when in remote DTE's switch
detects that the frame was received as Excess Burst
data.ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.18 |
usdFrCircuitSentDEsNumber of frames sent to the network indicating that
they were eligible for discard since the virtual
circuit was created. This occurs when the local DTE
sets the DE flag, indicating that during Network
congestion situations those frames should be discarded
in preference of other frames sent without the DE bit
set.ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.19 |
usdFrCircuitLogicalIfIndexNormally the same value as frDlcmiIfIndex, but
different when an implementation associates a virtual
ifEntry with a DLC or set of DLCs in order to associate
higher layer objects such as the ipAddrEntry with a
subset of the virtual circuits on a Frame Relay
interface. The type of such ifEntries is defined by the
higher layer object; for example, if PPP/Frame Relay is
implemented, the ifType of this ifEntry would be PPP.
If it is not so defined, as would be the case with an
ipAddrEntry, it should be of type Other.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.20 |
usdFrCircuitRowStatusThis object is used to create a new row or modify or
destroy an existing row in the manner described in the
definition of the RowStatus textual convention.
Writable objects in the table may be written in any
RowStatus state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.21 |
usdFrCircuitSentFECNsNumber of frames sent to the network indicating
forward congestion since the virtual circuit was
created. This occurs when the remote DTE sets the FECN
flag, or when a switch in the network enqueues the
frame to a trunk whose transmission queue is
congested.ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.22 |
usdFrCircuitSentBECNsNumber of frames sent to the network indicating
backward congestion since the virtual circuit was
created. This occurs when the remote DTE sets the BECN
flag, or when a switch in the network receives the
frame from a trunk whose transmission queue is
congested.ro Counter32 .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.23 |
usdFrSubIfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.10.1.2 |
usdFrSubIfNextIfIndexCoordinate ifIndex value allocation for entries
in usdFrSubIfTable.
A GET of this object returns the next available ifIndex
value to be used to create an entry in the associated
interface table; or zero, if no valid ifIndex value is
available. This object also returns a value of zero when
it is the lexicographic successor of a varbind presented
in an SNMP GETNEXT or GETBULK request, for which circumstance
it is assumed that ifIndex allocation is unintended.
Successive GETs will typically return different
values, thus avoiding collisions among cooperating
management clients seeking to create table entries
simultaneously.ro UsdNextIfIndex (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.10.1.2.1 |
usdFrSubIfTableThis table contains entries for Frame Relay Subinterfaces present
in the system. SEQUENCE OF UsdFrSubIfEntry .1.3.6.1.4.1.4874.2.2.10.1.2.2 |
usdFrSubIfEntryEach entry describes the characteristics of a Frame Relay Subinterface.
Creating/deleting entries in this table causes corresponding
entries for be created /deleted in ifTable/ifXTable/usdIfTable. UsdFrSubIfEntry .1.3.6.1.4.1.4874.2.2.10.1.2.2.1 |
usdFrSubIfIndexThe ifIndex of the Frame Relay Subinterface. When
creating entries in this table, suitable values
for this object are determined by reading
usdFrSubNextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.10.1.2.2.1.1 |
usdFrSubIfRowStatusControls creation/deletion of entries in this table
according to the RowStatus textual convention,
constrained to support the following values only:
createAndGo
destroy
To create an entry in this table, the following
entry objects MUST be explicitly configured:
usdFrSubIfRowStatus
usdFrSubIfLowerIfIndex
In addition, when creating an entry the following
conditions must hold:
A value for usdFrSubIfIndex must have been determined
previously, by reading usdFrSubIfNextIfIndex.
The interface identified by usdFrSubIfLowerIfIndex
must exist, and must be a Frame Relay interface.
A positive value configured for usdFrSubIfId must not
already be assigned to another subinterface layered
onto the same underlying Frame Relay interface.
A corresponding entry in ifTable/ifXTable/usdIfTable is
created/destroyed as a result of creating/destroying an entry
in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.10.1.2.2.1.2 |
usdFrSubIfLowerIfIndexThe ifIndex of a Frame Relay interface over which this
Frame Relay Subinterface is to be layered. A value of zero
indicates no layering. An implementation may choose to require
that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.10.1.2.2.1.3 |
usdFrSubIfIdAn integer identifier for the Frame Relay subinterface,
used in conjunction with the command-line interface.
It is provided here for cross-reference purposes only.
The value must be unique among subinterfaces configured on the same
underlying Frame Relay interface.
If this object is not configured, or is configured with a
value of -1, a nonzero value will be allocated internally
and can be retrieved from this object after table entry creation
has succeeded.
A value of zero for this object is reserved for future use.rw Integer32 (-1..2147483647) .1.3.6.1.4.1.4874.2.2.10.1.2.2.1.4 |
usdFrSubIfCktTableThis table contains entries for Frame Relay circuits configured on
Frame Relay Subinterfaces present in the system.
An implementation may constrain the number of circuits permitted
to be configured per Frame Relay Subinterface; in particular,
an implementation may restrict each Frame Relay Subinterface to
have a single circuit.
Attributes in this entry can only be configured at entry creation,
and remain fixed for the lifetime of the entry. SEQUENCE OF UsdFrSubIfCktEntry .1.3.6.1.4.1.4874.2.2.10.1.2.3 |
usdFrSubIfCktEntryEach entry describes the characteristics of a Frame Relay Subinterface
circuit. UsdFrSubIfCktEntry .1.3.6.1.4.1.4874.2.2.10.1.2.3.1 |
usdFrSubIfCktDlciThe DLCI of the Frame Relay circuit used by this subinterface. DLCI (FRAME-RELAY-DTE-MIB) .1.3.6.1.4.1.4874.2.2.10.1.2.3.1.1 |
usdFrSubIfCktRowStatusControls creation/deletion of entries in this table
according to the RowStatus textual convention,
constrained to support the following values only:
createAndGo
destroy
To create an entry in this table, the following
entry objects MUST be explicitly configured:
usdFrSubIfCktRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.10.1.2.3.1.2 |
usdFrConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.10.4 |
usdFrCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.10.4.1 |
usdFrGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.10.4.2 |