Unisphere-Data-Ethernet-CONF
The Unisphere-Data-Ethernet-CONF MIB defines agent capabilities for monitoring Ethernet interface states, traffic counters, and error statistics on EMC Unisphere Routing Switches. It enables SNMP-based management of Layer 2 connectivity parameters and port configuration attributes within the Unisphere Data Center networking environment.
Imported Objects
Objects
4 total| Object Name |
|---|
usdEthernetAgentThe agent capabilities definitions for the Ethernet component of the SNMP agent in the Unisphere Routing Switch family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.14 |
usdEthernetAgentV1The MIBs supported by the SNMP agent for the Ethernet application in the Unisphere Routing Switch. These capabilities became obsolete when VLAN support was add.obsolete Unknown .1.3.6.1.4.1.4874.5.2.14.1 |
usdEthernetAgentV2The MIBs supported by the SNMP agent for the Ethernet application in the Unisphere Routing Switch. These capabilities became obsolete when VLAN stack support was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.14.2 |
usdEthernetAgentV3The MIBs supported by the SNMP agent for the Ethernet application in the Unisphere Routing Switch. Unknown .1.3.6.1.4.1.4874.5.2.14.3 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module