Unisphere-Data-BRIDGE-ETHERNET-MIB
The Unisphere-Data-BRIDGE-ETHERNET-MIB enables monitoring and management of Layer 2 Ethernet bridging parameters, including port states, MAC address tables, and bridge group statistics, specifically within Unisphere Networks Inc. hardware and software environments.
Imported Objects
Objects
16 total| Object Name |
|---|
usdBridgeEthernetMIBThe Bridge Ethernet MIB for the Unisphere Networks Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.31 |
usdBridgedEthernetObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.31.1 |
usdBridgedEthernetIfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.31.1.1 |
usdBridgedEthernetNextIfIndexCoordinate ifIndex value allocation for entries in usdBridgedEthernetIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro UsdNextIfIndex (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.31.1.1.1 |
usdBridgedEthernetIfTableThe parameters for the BridgedEthernet service on this interface. SEQUENCE OF UsdBridgedEthernetIfEntry .1.3.6.1.4.1.4874.2.2.31.1.1.2 |
usdBridgedEthernetIfEntryThe Parameters for a particular Bridged Ethernet interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/usdIfTable UsdBridgedEthernetIfEntry .1.3.6.1.4.1.4874.2.2.31.1.1.2.1 |
usdBridgedEthernetIfIfIndexThe ifIndex value of the corresponding ifEntry.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.31.1.1.2.1.1 |
usdBridgedEthernetProxyArpThe proxyArp configuration setting for this entry. *** NOTE: This MIB object has been obsoleted. ***rwobsolete Enumeration .1.3.6.1.4.1.4874.2.2.31.1.1.2.1.2 |
usdBridgedEthernetIfLowerIfIndexThe ifIndex of an interface over which this Bridged Ethernet interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.31.1.1.2.1.3 |
usdBridgedEthernetIfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdBridgedEthernetIfRowStatus usdBridgedEthernetIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for usdBridgedEthernetIfIndex must have been determined previously, by reading usdBridgedEthernetNextIfIndex. The interface identified by usdBridgedEthernetIfLowerIfIndex must exist, and must be an interface type that permits layering of Bridged Ethernet above it. A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.31.1.1.2.1.4 |
usdBridgeEthernetConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.31.4 |
usdBridgeEthernetCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.31.4.1 |
usdBridgedEthernetComplianceThe compliance statement for entities which implement the Unisphere bridged Ethernet MIB. Unknown .1.3.6.1.4.1.4874.2.2.31.4.1.1 |
usdBridgeEthernetGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.31.4.2 |
usdBridgedEthernetGroupA collection of objects providing management of Bridged Ethernet interfaces in a Unisphere product. This group became obsolete when usdBridgedEthernetProxyArp was made obsolete.obsolete Unknown .1.3.6.1.4.1.4874.2.2.31.4.2.1 |
usdBridgedEthernetGroup2A collection of objects providing management of Bridged Ethernet interfaces in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.31.4.2.2 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module