Unisphere-Data-ADDRESS-POOL-MIB
AI MIB Summary
The Unisphere-Data-ADDRESS-POOL-MIB enables monitoring and management of IP address allocation pools, including available, used, and reserved address counts, within EMC Unisphere storage networking environments. This module facilitates capacity planning and conflict detection by exposing the current state and utilization metrics of defined address ranges for networked storage devices.
The Address Pool MIB for the Unisphere Networks enterprise.
Main OID:
usdAddressPoolMIB.1.3.6.1.4.1.4874.2.2.21
40
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
40 total| Object Name |
|---|
usdAddressPoolMIBThe Address Pool MIB for the Unisphere Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.21 |
usdAddressPoolObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.21.1 |
usdAddressPool OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.21.1.1 |
usdAddressPoolTableA table of IP address pool configuration entries. SEQUENCE OF UsdAddressPoolEntry .1.3.6.1.4.1.4874.2.2.21.1.1.1 |
usdAddressPoolEntryAn entry describing an IP address pool configuration. UsdAddressPoolEntry .1.3.6.1.4.1.4874.2.2.21.1.1.1.1 |
usdAddressPoolIndexAn arbitrary integer index that distinguishes this address pool. Integer32 .1.3.6.1.4.1.4874.2.2.21.1.1.1.1.1 |
usdAddressPoolRowStatusControls creation/deletion of address pools. Only value 'active' will be observed with GET. Only values 'createAndGo' and 'destroy' are supported for SET. Once created, entry content cannot be modified except by deleting and recreating an entry with the same index.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.21.1.1.1.1.2 |
usdAddressPoolNameThe name of this address pool. Represents textual information taken from the NVT ASCII graphics character set (codes 32 through 126).rw OCTET STRING .1.3.6.1.4.1.4874.2.2.21.1.1.1.1.3 |
usdAddressPoolStartThe starting IP address for the range of addresses comprising this pool.rwdeprecated IpAddress .1.3.6.1.4.1.4874.2.2.21.1.1.1.1.4 |
usdAddressPoolEndThe ending IP address for the range of addresses comprising this pool.rwdeprecated IpAddress .1.3.6.1.4.1.4874.2.2.21.1.1.1.1.5 |
usdAddressPoolSizeThe number of addresses available in this pool.rodeprecated Integer32 .1.3.6.1.4.1.4874.2.2.21.1.1.1.1.6 |
usdAddressPoolInUseThe number of addresses currently allocated from this pool.rodeprecated Integer32 .1.3.6.1.4.1.4874.2.2.21.1.1.1.1.7 |
usdAddressPoolHighUtilThresholdThe value of address pool utilization, where if reached for the first time, will generate a high address pool utilization event to the management entity on this system. The value of this object must be greater than the value of usdAddressPoolAbatedUtilThreshold.rw Integer32 .1.3.6.1.4.1.4874.2.2.21.1.1.1.1.8 |
usdAddressPoolAbatedUtilThresholdThe value of address pool utilization that is used to determine when to generate an abated address pool utilization event notification to the management entity on this system. The value of this object must be less than the value of the usdAddressPoolHighUtilThreshold. The abated address pool utilization event is sent once if the high address pool utilization threshold is reached and utilization falls to the value of this object.rw Integer32 .1.3.6.1.4.1.4874.2.2.21.1.1.1.1.9 |
usdAddressPoolUtilPctThe current address utilization for this pool.ro INTEGER .1.3.6.1.4.1.4874.2.2.21.1.1.1.1.10 |
usdAddressPoolTrapEnableThe configuration setting for address pool notifications. Setting this object to enable(1) will enable the sending of usdAddressPool event notifications to the management entity on this device. Setting this object to false(2) will disable event notification reports.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.21.1.1.1.1.11 |
usdAddressPoolNextPoolIndexCoordinate usdAddressPoolIndex value allocation for entries in usdAddressPoolTable. A GET of this object returns the next available usdAddressPoolIndex value to be used to create an entry in the associated usdAddressPoolTable; or zero, if no valid usdAddressPoolIndex is available. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that a new index allocation is unintended. Successive GETs will return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro Integer32 .1.3.6.1.4.1.4874.2.2.21.1.1.2 |
usdAddressPoolProfileTableA table of IP address pool profile entries. SEQUENCE OF UsdAddressPoolProfileEntry .1.3.6.1.4.1.4874.2.2.21.1.1.3 |
usdAddressPoolProfileEntryAn IP address pool profile entry. UsdAddressPoolProfileEntry .1.3.6.1.4.1.4874.2.2.21.1.1.3.1 |
usdAddressPoolProfileIndexA monotonically increasing integer for the sole purpose of indexing entries within the named address pool. Integer32 .1.3.6.1.4.1.4874.2.2.21.1.1.3.1.1 |
usdAddressPoolProfileRowStatusControls creation/deletion of address pools. Only value 'active' will be observed with GET. Only values 'createAndGo' and 'destroy' are supported for SET. Once created, entry content cannot be modified except by deleting and recreating an entry with the same index.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.21.1.1.3.1.2 |
usdAddressPoolProfileStartThe starting IP address for the range of addresses comprising this pool.rw IpAddress .1.3.6.1.4.1.4874.2.2.21.1.1.3.1.3 |
usdAddressPoolProfileEndThe ending IP address for the range of addresses comprising this pool.rw IpAddress .1.3.6.1.4.1.4874.2.2.21.1.1.3.1.4 |
usdAddressPoolProfileSizeThe number of addresses available in this pool.ro Integer32 .1.3.6.1.4.1.4874.2.2.21.1.1.3.1.5 |
usdAddressPoolProfileInUseThe number of addresses currently allocated from this pool.ro Integer32 .1.3.6.1.4.1.4874.2.2.21.1.1.3.1.6 |
usdAddressPoolTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.21.3 |
usdAddressPoolTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.21.3.0 |
usdAddressPoolHighAddrUtilReports address pool utilization has reached the configured high utilization threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.21.3.0.1 |
usdAddressPoolAbatedAddrUtilReports address pool utilization has fallen to the configured abated threshold level. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.21.3.0.2 |
usdAddressPoolNoAddressesReports address pool has exhausted its supply of addresses. This trap is issued every time a request is made to allocate an address from a fully utilized pool. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.21.3.0.3 |
usdAddressPoolMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.21.4 |
usdAddressPoolMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.21.4.1 |
usdAddressPoolComplianceObsolete compliance statement for systems providing local address pools. This statement became obsolete when pool exhaustion variables and notifications were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.21.4.1.1 |
usdAddressPoolCompliance2Obsolete compliance statement for systems providing local address pools. This statement became obsolete when support was added for address pools with multiple address ranges.obsolete Unknown .1.3.6.1.4.1.4874.2.2.21.4.1.2 |
usdAddressPoolCompliance3The compliance statement for systems providing local address pools. Unknown .1.3.6.1.4.1.4874.2.2.21.4.1.3 |
usdAddressPoolMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.21.4.2 |
usdAddressPoolGroupObsolete collection of objects providing management of local address pools. This group became obsolete when pool exhaustion variables and notifications were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.21.4.2.1 |
usdAddressPoolGroup2The basic collection of objects providing management of local address pools. This group was deprecated when support was added for address pools with multiple address ranges.deprecated Unknown .1.3.6.1.4.1.4874.2.2.21.4.2.2 |
usdAddressPoolTrapGroupThe notifications providing alarms for high pool utilization and pool exhaustion of local address pools. Unknown .1.3.6.1.4.1.4874.2.2.21.4.2.3 |
usdAddressPoolGroup3The basic collection of objects providing management of local address pools. Unknown .1.3.6.1.4.1.4874.2.2.21.4.2.4 |