USR-VTP-MIB
The USR-VTP-MIB provides SNMP access to monitor and manage Cisco Catalyst switch VLAN Trunking Protocol (VTP) states, including domain names, configuration revision numbers, and VTP mode settings on USR (CommWorks) enterprise networking hardware.
Imported Objects
Objects
69 total| Object Name |
|---|
usrVTPThe commWorks enterprise defined MIB objects for VTP MODULE-IDENTITY .1.3.6.1.4.1.77.1.1.70 |
usrVtpControl OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.70.1 |
usrVtpTimecheckThis variable allows enabling/disabling of the timestamp
check performed by VTP on received messages. If there are
problems with the NTP server and/or clock synchronization,
it should be set to disabled.rw Enumeration .1.3.6.1.4.1.77.1.1.70.1.1 |
usrVtpStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.70.2 |
usrVtpRegistrationRequestsInA table containing all the counters.ro Counter32 .1.3.6.1.4.1.77.1.1.70.2.1 |
usrVtpRegistrationRequestsOutRegistration requests sent counterro Counter32 .1.3.6.1.4.1.77.1.1.70.2.2 |
usrVtpRegistrationResponsesInRegistration responses recvdro Counter32 .1.3.6.1.4.1.77.1.1.70.2.3 |
usrVtpRegistrationResponsesOutRegistration responses sentro Counter32 .1.3.6.1.4.1.77.1.1.70.2.4 |
usrVtpRefreshRequestsInRefresh requests received.ro Counter32 .1.3.6.1.4.1.77.1.1.70.2.5 |
usrVtpRefreshRequestsOutRefresh requests sentro Counter32 .1.3.6.1.4.1.77.1.1.70.2.6 |
usrVtpRefreshResponsesInRefresh responses received.ro Counter32 .1.3.6.1.4.1.77.1.1.70.2.7 |
usrVtpRefreshResponsesOutRefresh responses sentro Counter32 .1.3.6.1.4.1.77.1.1.70.2.8 |
usrVtpDeregistrationRequestsInDe registration requests receivedro Counter32 .1.3.6.1.4.1.77.1.1.70.2.9 |
usrVtpDeregistrationRequestsOutDe registration requests receivedro Counter32 .1.3.6.1.4.1.77.1.1.70.2.10 |
usrVtpDeregistrationResponsesInDe registration responses sentro Counter32 .1.3.6.1.4.1.77.1.1.70.2.11 |
usrVtpDeregistrationResponsesOutDe registration responses sentro Counter32 .1.3.6.1.4.1.77.1.1.70.2.12 |
usrVtpPDUAuthenticationFailuresPDU authentication failuresro Counter32 .1.3.6.1.4.1.77.1.1.70.2.13 |
usrVtpVPNValidationFailuresVPN validation failuresro Counter32 .1.3.6.1.4.1.77.1.1.70.2.14 |
usrVtpTimeCheckFailuresThe number of VTP messages which failed the
timestamp check.ro Counter32 .1.3.6.1.4.1.77.1.1.70.2.15 |
usrVtpCca OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.70.3 |
usrVtpCcaTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.70.3.1 |
usrCcaTunnelTableA table of CCA VTP tunnels SEQUENCE OF UsrCcaTunnelEntry .1.3.6.1.4.1.77.1.1.70.3.1.1 |
usrCcaTunnelEntryAn entry in the CCA VTP Tunnel table UsrCcaTunnelEntry .1.3.6.1.4.1.77.1.1.70.3.1.1.1 |
usrCcaTunnelTunnelIdxro Integer32 .1.3.6.1.4.1.77.1.1.70.3.1.1.1.1 |
usrCcaTunnelVPNNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.70.3.1.1.1.2 |
usrCcaTunnelInterfaceNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.70.3.1.1.1.3 |
usrCcaTunnelEstabTimero TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.70.3.1.1.1.4 |
usrCcaTunnelVPNIdro Integer32 .1.3.6.1.4.1.77.1.1.70.3.1.1.1.5 |
usrCcaTunnelGatewayAddrro IpAddress .1.3.6.1.4.1.77.1.1.70.3.1.1.1.6 |
usrCcaTunnelNasAddrro IpAddress .1.3.6.1.4.1.77.1.1.70.3.1.1.1.7 |
usrCcaTunnelSessionCountro Integer32 .1.3.6.1.4.1.77.1.1.70.3.1.1.1.8 |
usrCcaTunnelStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.70.3.1.1.1.9 |
usrVtpCcaSession OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.70.3.2 |
usrCcaSessionTableA table of client sessions within a tunnel. SEQUENCE OF UsrCcaSessionEntry .1.3.6.1.4.1.77.1.1.70.3.2.1 |
usrCcaSessionEntryAn entry in the tunnel client session table. UsrCcaSessionEntry .1.3.6.1.4.1.77.1.1.70.3.2.1.1 |
usrCcaSessionTunnelIdThe value used by VTP to uniquely identify this
tunnel by both the VPN Gateway and the NAS. This value
is also used in the GRE encapsulated packets to
identify which tunnel a given packet is onro Integer32 .1.3.6.1.4.1.77.1.1.70.3.2.1.1.1 |
usrCcaSessionSPIThe session's Security Parameter Index. Used to
identify a given session.ro Integer32 .1.3.6.1.4.1.77.1.1.70.3.2.1.1.2 |
usrCcaSessionVPNIdThe VPN Identifier for the VPN that this session's
tunnel is a member ofro Integer32 .1.3.6.1.4.1.77.1.1.70.3.2.1.1.3 |
usrCcaSessionUserNameThe user login string as authenticated by the
originating NAS.ro DisplayString .1.3.6.1.4.1.77.1.1.70.3.2.1.1.4 |
usrCcaSessionIPregistrationIndicates if IP is or is not registered for this
session.ro Enumeration .1.3.6.1.4.1.77.1.1.70.3.2.1.1.5 |
usrCcaSessionIProutingIndicates state of IP routing for this session.ro Enumeration .1.3.6.1.4.1.77.1.1.70.3.2.1.1.6 |
usrCcaSessionIProutingProtoIf IP routing is enabled, indicates which routing
protocol is used for this session.ro Enumeration .1.3.6.1.4.1.77.1.1.70.3.2.1.1.7 |
usrCcaSessionIPlocalAddressThe IP address the VPN Gateway's virtual router is
using for this link.ro IpAddress .1.3.6.1.4.1.77.1.1.70.3.2.1.1.8 |
usrCcaSessionIPlocalMaskThe IP subnet mask the VPN Gateway's virtual router
is using for this link.ro IpAddress .1.3.6.1.4.1.77.1.1.70.3.2.1.1.9 |
usrCcaSessionIPclientAddressThe IP address of the NAS's dial-in client, which is
the remote end of this link.ro IpAddress .1.3.6.1.4.1.77.1.1.70.3.2.1.1.10 |
usrCcaSessionIPclientMaskThe IP subnet mask of the NAS's dial-in client, which
is the remote end of this link.ro IpAddress .1.3.6.1.4.1.77.1.1.70.3.2.1.1.11 |
usrCcaSessionIPXregistrationIndicates if IPX is or is not registered for this
sessionro Enumeration .1.3.6.1.4.1.77.1.1.70.3.2.1.1.12 |
usrCcaSessionIPXroutingIndicates state of IPX routing for this sessionro Enumeration .1.3.6.1.4.1.77.1.1.70.3.2.1.1.13 |
usrCcaSessionIPXroutingProtoIf IPX routing is enabled, indicates which routing
protocol is used for this sessionro Enumeration .1.3.6.1.4.1.77.1.1.70.3.2.1.1.14 |
usrCcaSessionIPXlocalNetworkThe IPX Network number the VPN Gateway's virtual
router is using for this link.ro IpxNetwork .1.3.6.1.4.1.77.1.1.70.3.2.1.1.15 |
usrCcaSessionIPXlocalNodeThe IPX Node address the VPN Gateway's virtual router
is using for this link.ro OCTET STRING .1.3.6.1.4.1.77.1.1.70.3.2.1.1.16 |
usrCcaSessionIPXclientNetworkThe IPX Network number of the NAS's dial-in client,
which is the remote end of this linkro IpxNetwork .1.3.6.1.4.1.77.1.1.70.3.2.1.1.17 |
usrCcaSessionIPXclientNodeThe IPX Node address of the NAS's dial-in client,
which is the remote end of this linkro OCTET STRING .1.3.6.1.4.1.77.1.1.70.3.2.1.1.18 |
usrCcaSessionStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.70.3.2.1.1.19 |
usrVtpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.70.6 |
usrVtpTrapsV2Events for VTP OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.70.6.0 |
usrVtpTunnelEstablishmentFailureThis trap is generated for tunnel
establishment failure. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.70.6.0.1 |
usrGreControl OBJECT IDENTIFIER .1.3.6.1.4.1.429.4.72.1 |
usrGreStateIndicates if GRE is enabled or disabled. If the VTP
process is running, the state will always be enabled.ro Enumeration .1.3.6.1.4.1.429.4.72.1.1 |
usrGreStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.429.4.72.2 |
usrGreNetPktsInCount of GRE encapsulated packets received from IP.ro Counter32 .1.3.6.1.4.1.429.4.72.2.1 |
usrGreNetPktsInDeliveredCount of de-encapsulated GRE payloads delivered to
GRE clients.ro Counter32 .1.3.6.1.4.1.429.4.72.2.2 |
usrGreNetPktsInDiscardedTotal count of de-encapsulated GRE payloads
discarded.ro Counter32 .1.3.6.1.4.1.429.4.72.2.3 |
usrGreNetPktsInHdrErrsCount of GRE packets discarded due to malformed
headers.ro Counter32 .1.3.6.1.4.1.429.4.72.2.4 |
usrGreNetPktsInNoClientsCount of de-encapsulated GRE payloads discarded due
to no client.ro Counter32 .1.3.6.1.4.1.429.4.72.2.5 |
usrGreClientPktsInCount of packets handed to GRE for encapsulation and
subsequent transmission.ro Counter32 .1.3.6.1.4.1.429.4.72.2.6 |
usrGreClientPktsEncapsulatedCount of packets handed to GRE for encapsulation
which were actually encapsulated.ro Counter32 .1.3.6.1.4.1.429.4.72.2.7 |
usrGreClientPktsDiscardedCount of packets handed to GRE for encapsulation
which were discarded for some reason.ro Counter32 .1.3.6.1.4.1.429.4.72.2.8 |
usrGreClientPktToIPCount of GRE encapsulated payloads which were passed
to IP for transmission.ro Counter32 .1.3.6.1.4.1.429.4.72.2.9 |
More MIBs from Lanmanager
Browse all LanmanagerMIBs →The USR-USER-MAN-MIB facilitates the monitoring and management of user authentication sessions, active login states, and access control policies on commWorks (US Robotics) network infrastructure devices. This module enables administrators to track real-time user connectivity metrics and enforce security configurations via SNMP.
The Cip-MIB provides enterprise-specific SNMP objects for monitoring and managing commWorks CIP (Common Industrial Protocol) devices, enabling the tracking of industrial automation session states, communication errors, and device operational parameters.
The USR-VHA-MIB provides SNMP management access for commWorks VHA (Virtual Host Appliance) devices, enabling monitoring of virtualization-specific metrics such as session states, resource utilization, and interface statistics. This module facilitates the tracking of virtual host availability and performance parameters critical for maintaining the operational integrity of commWorks virtual infrastructure.
The USR-FA-MIB provides management objects for monitoring Wireless Foreign Agent session states, tunnel configurations, and mobility parameters on CommWorks enterprise wireless infrastructure. This module enables the tracking of mobile node registration, handover events, and Foreign Agent resource utilization within a Mobile IP environment.
Standard SNMP MIB module defining data structures for UsrUserMan-MIB.
The ROBOEXEC-RESOURCES-MIB defines commWorks enterprise-specific objects for monitoring system resource utilization and operational status of RoboExec appliances. This module provides granular visibility into device health metrics, including CPU load, memory consumption, and process states, enabling administrators to track performance thresholds and resource exhaustion on RoboExec hardware.