USR-PPPOE-MIB
AI MIB Summary
The USR-PPPOE-MIB provides vendor-specific management objects for commWorks hardware to monitor and control PPPoE session states, authentication status, and associated interface statistics. This module enables the tracking of active PPPoE connections, error counters, and link establishment parameters specific to USR (United Systems Research) networking equipment.
The commWorks enterprise defined MIB objects for PPP over Ethernet.
Main OID:
usrPPPoE.1.3.6.1.4.1.77.1.1.79
29
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
usrPPPoEThe commWorks enterprise defined MIB objects
for PPP over Ethernet. MODULE-IDENTITY .1.3.6.1.4.1.77.1.1.79 |
usrPPPoEInterfaceTableThe table listing the interfaces on which PPPoE is enabled. SEQUENCE OF UsrPPPoEInterfaceEntry .1.3.6.1.4.1.77.1.1.79.1 |
usrPPPoEInterfaceEntryAn entry representing an interface on which PPPoE is enabled. UsrPPPoEInterfaceEntry .1.3.6.1.4.1.77.1.1.79.1.1 |
usrPPPoEInterfaceNameThe interface name for which PPPoE is enabled. DisplayString .1.3.6.1.4.1.77.1.1.79.1.1.1 |
usrPPPoEInterfaceEnabledWhether PPPoE is enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.79.1.1.2 |
usrPPPoEConfigFileNameThe name of a ConfigFile to read/write permanent database records.
If the value of this object is an empty string, then the
PPPoE process uses the default name `@file://PPPoEProcess.cfg'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.79.2 |
usrPPPoECFMStatusFlagCFM Config Flagrw UsrConfigStatus .1.3.6.1.4.1.77.1.1.79.3 |
usrPPPoENumberSessionsThe number of Active PPPoE Sessionsro Counter32 .1.3.6.1.4.1.77.1.1.79.4 |
usrPPPoETotalNumberSessionsThe total number of PPPoE Sessions since rebootro Counter32 .1.3.6.1.4.1.77.1.1.79.5 |
usrPPPoENumberPADIRejectedThe number of PADI discardedro Counter32 .1.3.6.1.4.1.77.1.1.79.6 |
usrPPPoENumberPADIReceivedThe number of PPPoE PADI receivedro Counter32 .1.3.6.1.4.1.77.1.1.79.7 |
usrPPPoENumberPADRRejectedThe number of PPPoE PADR discardedro Counter32 .1.3.6.1.4.1.77.1.1.79.8 |
usrPPPoENumberPADRReceivedThe number of PPPoE PADR receivedro Counter32 .1.3.6.1.4.1.77.1.1.79.9 |
usrPPPoENumberPADOTransmittedThe number of PPPoE PADO transmittedro Counter32 .1.3.6.1.4.1.77.1.1.79.10 |
usrPPPoENumberPADSTransmittedThe number of PPPoE PADS transmittedro Counter32 .1.3.6.1.4.1.77.1.1.79.11 |
usrPPPoENumberPADTThe number of PPPoE PADT exchangedro Counter32 .1.3.6.1.4.1.77.1.1.79.12 |
usrPPPoENumberBadPacketsThe number of bad PPPoE packetsro Counter32 .1.3.6.1.4.1.77.1.1.79.13 |
usrPPPoECounterResetTimeThe last time PPPoE counters were reset.
This value is UCT based.rw Unsigned32 .1.3.6.1.4.1.77.1.1.79.14 |
usrPPPoEMaxTotalSessionsThe number of maximum allowed PPPoE sessionsrw Integer32 .1.3.6.1.4.1.77.1.1.79.15 |
usrPPPoEMaxSessionsPerHostThe number of maximum allowed PPPoE sessions to a peerrw Integer32 .1.3.6.1.4.1.77.1.1.79.16 |
usrPPPoESessionThe root of PPPoE Session Table OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.79.17 |
usrPPPoESessionTable SEQUENCE OF UsrPPPoESessionEntry .1.3.6.1.4.1.77.1.1.79.17.1 |
usrPPPoESessionEntryTable of PPPoE sessions in the Access Concentrator UsrPPPoESessionEntry .1.3.6.1.4.1.77.1.1.79.17.1.1 |
usrPPPoESessionIDThis object contains the session
identifier for this sessionro Integer32 .1.3.6.1.4.1.77.1.1.79.17.1.1.1 |
usrPPPoEPeerAddressThis object contains the MAC address for the session peer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.79.17.1.1.2 |
usrPPPoEServiceNameTableThe table listing the service names configured for PPPoE. SEQUENCE OF UsrPPPoEServiceNameEntry .1.3.6.1.4.1.77.1.1.79.18 |
usrPPPoEServiceNameEntryAn entry representing service name enabled for PPPoE UsrPPPoEServiceNameEntry .1.3.6.1.4.1.77.1.1.79.18.1 |
usrPPPoEServiceNameThe service name enabled for PPPoE. DisplayString .1.3.6.1.4.1.77.1.1.79.18.1.1 |
usrPPPoEServiceNameStatusWhether pppoe service name is enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.79.18.1.2 |