USR-OSPF-MIB
AI MIB Summary
The USR-OSPF-MIB enables monitoring and management of Cisco IOS OSPF protocol instances, specifically tracking interface states, neighbor adjacencies, LSDB synchronization status, and routing table metrics. This vendor-specific extension facilitates granular visibility into OSPF process health and convergence behavior for enterprise network troubleshooting.
The MIB module to describe the enterprise specific objects for the OSPF Protocol
Main OID:
usrOspf.1.3.6.1.4.1.77.1.1.63
44
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
44 total| Object Name |
|---|
usrOspfThe MIB module to describe the enterprise specific
objects for the OSPF Protocol MODULE-IDENTITY .1.3.6.1.4.1.77.1.1.63 |
usrOspfExportPolicyTableA set of export policies for OSPF. SEQUENCE OF UsrOspfExportPolicyEntry .1.3.6.1.4.1.77.1.1.63.1 |
usrOspfExportPolicyEntry UsrOspfExportPolicyEntry .1.3.6.1.4.1.77.1.1.63.1.1 |
usrOspfExportPolicyNetSpecifies the network address which will match this policy.ro IpAddress .1.3.6.1.4.1.77.1.1.63.1.1.1 |
usrOspfExportPolicyMaskThe network mask to be applied to the network address to
specify a specific address or range of addresses for this policy.ro IpAddress .1.3.6.1.4.1.77.1.1.63.1.1.2 |
usrOspfExportPolicyRouteSourceIdentifies the source of the routing information: local,
static, or RIP.ro Enumeration .1.3.6.1.4.1.77.1.1.63.1.1.3 |
usrOspfExportPolicyActionThe action to take with this export policy. If the action
is propagate, the route or routes described by the entry are included
in the local OSPF updates if they exist in the routing table. If the
action is ignore, the route or routes described are not advertised in
the local OSPF updates.rw Enumeration .1.3.6.1.4.1.77.1.1.63.1.1.4 |
usrOspfExportPolicyMetricThe metric to be used when advertising the route(s)
described by this policy. A metric value of 0 will cause the
metric that is inserted into the AS External Links advertisement
to be taken from the associated route entry in the routing table.
For all other valid metric values, the value is directly inserted
into the AS External Links advertisement.rw Integer32 .1.3.6.1.4.1.77.1.1.63.1.1.5 |
usrOspfExportPolicyMetricTypeThis variable describes the external type of metric that the
export policy will advertise an external route as. Essentially
this variable determines if the E Bit in an AS External Links
Advertisement is set or not. A selection of external type II
will cause the E bit to be set to 1. An external route tagged
as an external type II indicates that the external cost to
the route is all that should be associated with it's cost metric.
A route tagged as external type I indicates that the
internal cost to the Autonomous System Border Router as well
as the external cost of the route should be associated with
the route's cost metric.rw Enumeration .1.3.6.1.4.1.77.1.1.63.1.1.6 |
usrOspfExportPolicyTagThe routing tag to be used when exporting the route(s)
described by this policy entry.rw Integer32 .1.3.6.1.4.1.77.1.1.63.1.1.7 |
usrOspfExportPolicyStatusThe administrative status of the export policy entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.63.1.1.8 |
usrOspfImportPolicyTableA set of OSPF import policies. SEQUENCE OF UsrOspfImportPolicyEntry .1.3.6.1.4.1.77.1.1.63.2 |
usrOspfImportPolicyEntryAn entry for an OSPF Import Policy UsrOspfImportPolicyEntry .1.3.6.1.4.1.77.1.1.63.2.1 |
usrOspfImportPolicyNetThe network address of the destination or set of
destinations for which this import policy is being defined.ro IpAddress .1.3.6.1.4.1.77.1.1.63.2.1.1 |
usrOspfImportPolicyMaskThe network mask for the destination or set of
destinations for which this import policy is being defined.ro IpAddress .1.3.6.1.4.1.77.1.1.63.2.1.2 |
usrOspfImportPolicyActionThe action to take with this import policy. If the action
is accept, the route or routes described by the entry are included
in the routing table when received in peer OSPF updates. If the action
is ignore, the route or routes described are filtered from received
OSPF updates.rw Enumeration .1.3.6.1.4.1.77.1.1.63.2.1.3 |
usrOspfImportPolicyRoutingPreferenceThe routing preference to associate with this route. A routing preference
of routingPreference0 is more preferred than a preference equal to
routingPreference1. A routing preference of routingPreference1 is more
preferred than a preference equal to routingPreference2. A routing
preference of routingPreference3 will cause a route to never be used
in forwarding. It will be present in the routing table but will never
make it into the forwarding table.rw Enumeration .1.3.6.1.4.1.77.1.1.63.2.1.4 |
usrOspfImportPolicyStatusThe administrative status of the import policy entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.63.2.1.5 |
usrOspfAreaTableNOT IMPLEMENTED!
Information describing the configured parame-
ters and cumulative statistics of the router's
attached areas. SEQUENCE OF UsrOspfAreaEntry .1.3.6.1.4.1.77.1.1.63.3 |
usrOspfAreaEntryInformation describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas. UsrOspfAreaEntry .1.3.6.1.4.1.77.1.1.63.3.1 |
usrOspfAreaIdA 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone.ro IpAddress .1.3.6.1.4.1.77.1.1.63.3.1.1 |
usrOspfAreaTypeThe area's support for determining if the Type is Stub or Transit.rw Enumeration .1.3.6.1.4.1.77.1.1.63.3.1.2 |
usrOspfVersionThe current software version of the OSPF Process.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.63.4 |
usrOspfConfigFileNameThe name of a ConfigFile to read/write permanent database records.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.63.5 |
usrOspfCFMStatusFlagSetting the value of this object to `save' causes the values
of the OSPF Group to be written out to the current config
file. While the new data is being written, the config process
will set the value of this flag to `saving''. Any
attempts to set the value while it is not `normal'
(i.e. the file is currently being written to the
ConfigFile) will result in a badValue error being
returned. Setting the value to `normal' will result in no
action.rw UsrConfigStatus .1.3.6.1.4.1.77.1.1.63.6 |
usrOspfDefaultAreaIdA 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone. This area ID is used
to create the default area when the ospf base is createdrw IpAddress .1.3.6.1.4.1.77.1.1.63.7 |
usrOspfHostTableThe list of Hosts, and their metrics, that the
router will advertise as host routes. SEQUENCE OF UsrOspfHostEntry .1.3.6.1.4.1.77.1.1.63.8 |
usrOspfHostEntryA metric to be advertised, for a given type of service,
when a given host is reachable. UsrOspfHostEntry .1.3.6.1.4.1.77.1.1.63.8.1 |
usrOspfHostIpAddressThe IP Address of the Host.ro IpAddress .1.3.6.1.4.1.77.1.1.63.8.1.1 |
usrOspfHostIpTOSThe Type of Service of the route being config-
ured.ro TOSType .1.3.6.1.4.1.77.1.1.63.8.1.2 |
usrOspfHostIpMaskThe IP Mask of the Host.ro IpAddress .1.3.6.1.4.1.77.1.1.63.8.1.3 |
usrOspfCryptoKeyTableThe list of OSPF Cryptographic Authentication Keys
per OSPF Interface that will be used to generating/
verifying Cryptographic authentication. SEQUENCE OF UsrOspfCryptoKeyEntry .1.3.6.1.4.1.77.1.1.63.9 |
usrOspfCryptoKeyEntryThe information regarding a single OSPF Cryptographic
Authentication Key. UsrOspfCryptoKeyEntry .1.3.6.1.4.1.77.1.1.63.9.1 |
usrOspfIfIpAddressThe IP address of this OSPF interface.ro IpAddress .1.3.6.1.4.1.77.1.1.63.9.1.1 |
usrOspfAddressLessIfFor the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address.ro Integer32 .1.3.6.1.4.1.77.1.1.63.9.1.2 |
usrOspfCryptoKeyIdThe Key ID of this cryptographic key. This
field identifies the algorithm and secret key
used to create the message digest appended to
the OSPF packet. Key Identifiers are unique
per-interface (or equivalently, per-subnet).ro Integer32 (0..'FF'h) .1.3.6.1.4.1.77.1.1.63.9.1.3 |
usrOspfCryptoKeyThe Cryptographic Authentication Key. If the
Authentication Type is Cryptographic, and the
key length is shorter than 16 octets, the agent
will left adjust and zero fill to 16 octets.
When read, usrOspfCryptoKey always returns an
Octet String of length zero.rw OCTET STRING .1.3.6.1.4.1.77.1.1.63.9.1.4 |
usrOspfCryptoKeyStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.63.9.1.5 |
usrOspfCryptoAlgoThis field identifies the algorithm used to create
message digest.rw Integer32 -- md5 (0) .1.3.6.1.4.1.77.1.1.63.9.1.6 |
usrOspfCryptoKeyStartAcceptThe time that the router will start accepting
packets that have been created with the given key.
The time is expressed as a number of seconds since
the Epoch, 00:00:00 GMT, on January 1, 1995rw Integer32 .1.3.6.1.4.1.77.1.1.63.9.1.7 |
usrOspfCryptoKeyStartGenerateThe time that the router will start using the
key for packet generation.
The time is expressed as a number of seconds since
the Epoch, 00:00:00 GMT, on January 1, 1995rw Integer32 .1.3.6.1.4.1.77.1.1.63.9.1.8 |
usrOspfCryptoKeyStopGenerateThe time that the router will stop using the
key for packet generation.
The time is expressed as a number of seconds since
the Epoch, 00:00:00 GMT, on January 1, 1995.
The value 0HFFFFFFFF stands for infinity.rw Integer32 .1.3.6.1.4.1.77.1.1.63.9.1.9 |
usrOspfCryptoKeyStopAcceptThe time that the router will stop accepting
packets that have been created with the given key.
The time is expressed as a number of seconds since
the Epoch, 00:00:00 GMT, on January 1, 1995
The value 0HFFFFFFFF stands for infinity.rw Integer32 .1.3.6.1.4.1.77.1.1.63.9.1.10 |
usrOspfDefaultAreaStatusThis variable is used to delete the ospf default
area.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.63.10 |