USR-L2TP-MIB
AI MIB Summary
The USR-L2TP-MIB enables monitoring and management of Layer 2 Tunneling Protocol (L2TP) session states, tunnel endpoints, and associated error counters on commWorks hardware. This module provides specific visibility into L2TP tunnel establishment, termination, and throughput metrics for network troubleshooting and capacity planning.
The commWorks enterprise defined MIB objects for L2TP
Main OID:
usrL2TP.1.3.6.1.4.1.77.1.1.55
44
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
44 total| Object Name |
|---|
usrL2TPThe commWorks enterprise defined MIB objects for L2TP MODULE-IDENTITY .1.3.6.1.4.1.77.1.1.55 |
usrL2TPGlobalThe root of the L2TP global Object-Identifiers. OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.55.1 |
usrL2TPConfigTable SEQUENCE OF UsrL2TPConfigEntry .1.3.6.1.4.1.77.1.1.55.1.1 |
usrL2tpConfigEntry. UsrL2TPConfigEntry .1.3.6.1.4.1.77.1.1.55.1.1.1 |
usrL2tpConfigIndexA unique value for each l2tp protocol stack.ro Integer32 .1.3.6.1.4.1.77.1.1.55.1.1.1.1 |
usrL2tpLoadBalancingDefines If Load Balancing is enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.55.1.1.1.2 |
usrL2tpDialOutThis variable is set through the CLI when the user
manually issues a L2TP dial-out.rw OCTET STRING .1.3.6.1.4.1.77.1.1.55.1.1.1.3 |
usrL2tpLnsFlagSetting this object to a value of enabled(1) will enable
the L2TP lns enable feature. Setting this object to
disabled(2) will disable the L2TP LNS feature.rw Enumeration .1.3.6.1.4.1.77.1.1.55.1.1.1.4 |
usrL2tpPasswordEncryptStyleOriginal labels were Draft-3 and Draft-6. This value
defines the encryption style for tunnel password as
retrieved from RADIUS. It indicates whether or not
a salt or secret key value will be used to encrypt
the password.rw Enumeration .1.3.6.1.4.1.77.1.1.55.1.1.1.5 |
usrL2TPLcpRenegotiateAtLNSThis flag is used to enable/disable LCP renegotiation
for calls when doing proxy LCP on LNSrw Enumeration .1.3.6.1.4.1.77.1.1.55.1.1.1.6 |
usrL2tpAuthenticationRequiredOnOutgoingTunnelsWhen set to a value of true(1) requires that all
outgoing tunnels request tunnel authentication.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.55.1.1.1.7 |
usrL2tpNumberOfEchoRetransmissionsThis object defines the number of Hello retransmission's
which the L2TP stack will attempt before assuming that
the peer is no longer reachable. The default value for
this object is five (5).rw Integer32 .1.3.6.1.4.1.77.1.1.55.1.1.1.8 |
usrL2tpEchoRetransmissionIntervalThis object defines the number of seconds between each
retransmission.rw Integer32 .1.3.6.1.4.1.77.1.1.55.1.1.1.9 |
usrL2tpTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.55.2 |
usrL2tpTunnelQueryTableA table containing the READ ONLY propietary extension
parameters for L2TP Tunnel MIB. SEQUENCE OF UsrL2tpTunnelQueryEntry .1.3.6.1.4.1.77.1.1.55.2.1 |
usrL2tpTunnelQueryEntry UsrL2tpTunnelQueryEntry .1.3.6.1.4.1.77.1.1.55.2.1.1 |
usrL2tpTunnelLogicalStackIndexThis object contains a reference to the logical
l2tp protocol stack and must be the same as the
l2tpConfigIndex.ro Integer32 .1.3.6.1.4.1.77.1.1.55.2.1.1.1 |
usrL2tpTunnelLocalControlTunnelIdThis object contains the local tunnel Identifier.ro Integer32 .1.3.6.1.4.1.77.1.1.55.2.1.1.2 |
usrL2tpTunnelSecurityLevelThis field contains the security level
of the tunnel.ro Enumeration .1.3.6.1.4.1.77.1.1.55.2.1.1.3 |
usrL2tpTunnelDisconnectThis object is used to disconnect a specific tunnel.rw Integer32 .1.3.6.1.4.1.77.1.1.55.2.1.1.4 |
usrL2tpSessionThe root of L2TP Session Module Object-identifiers. OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.55.3 |
usrL2tpSessionTable SEQUENCE OF UsrL2tpSessionEntry .1.3.6.1.4.1.77.1.1.55.3.1 |
usrL2tpSessionEntry. UsrL2tpSessionEntry .1.3.6.1.4.1.77.1.1.55.3.1.1 |
usrL2tpSessionLogicalStackIndexThis object contains a reference to the logical
l2tp protocol stack and must be the same as the
l2tpConfigIndex and l2tpTunelLogicalStackIndex.ro Integer32 .1.3.6.1.4.1.77.1.1.55.3.1.1.1 |
usrL2tpSessionTunnelIDThis object contains the control Channel Tunnel
identifier for this sessionro Integer32 .1.3.6.1.4.1.77.1.1.55.3.1.1.2 |
usrL2tpSessionLocalCallIDThis object contains the local call identifier
for the session.ro Integer32 .1.3.6.1.4.1.77.1.1.55.3.1.1.3 |
usrL2tpSessionDisconnectThis object is used to disconnect a specific tunnel.rw Integer32 .1.3.6.1.4.1.77.1.1.55.3.1.1.4 |
usrL2tpHostTableThe table of L2TP LNSs. SEQUENCE OF UsrL2tpHostEntry .1.3.6.1.4.1.77.1.1.55.4 |
usrL2tpHostEntryA (conceptual) entry for one pptp Host. UsrL2tpHostEntry .1.3.6.1.4.1.77.1.1.55.4.1 |
usrL2tpHostIndexThe logical identifier of the Host Table. Integer32 .1.3.6.1.4.1.77.1.1.55.4.1.1 |
usrL2tpHostAddressThe specified or resolved ip address of the named Host.rw IpAddress .1.3.6.1.4.1.77.1.1.55.4.1.2 |
usrL2tpHostStatusThe status of this row of the Host Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.55.4.1.3 |
usrL2tpSharedSecretThe Shared Secret For This Host.rw OCTET STRING .1.3.6.1.4.1.77.1.1.55.4.1.4 |
usrL2tpSharedSecretStatusThe Shared Secret Status For This Host.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.55.4.1.5 |
usrL2tpSecurityLevelThe Security Level For This Host.rw Enumeration .1.3.6.1.4.1.77.1.1.55.4.1.6 |
usrL2TPConfigFileNameThe name of a ConfigFile to read/write permanent database records.
If the value of this object is an empty string, then the
L2TP process uses the default name `@file://L2tpProcess.cfg'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.55.5 |
usrL2TPCFMStatusFlagCFM Config Flagrw UsrConfigStatus .1.3.6.1.4.1.77.1.1.55.6 |
usrL2tpStatsTableA table containing a single row containing new
L2TP counters SEQUENCE OF UsrL2tpStatsEntry .1.3.6.1.4.1.77.1.1.55.7 |
usrL2tpStatsEntry UsrL2tpStatsEntry .1.3.6.1.4.1.77.1.1.55.7.1 |
usrL2tpStatsIndexShould be the same value as l2tpConfigIndex and l2tpStatsIndex
to reference the same logical l2tp protocol stack.
On HiPer ARC, this index is always 1ro Integer32 .1.3.6.1.4.1.77.1.1.55.7.1.1 |
usrL2tpStatsTunnelSetupAttemptsCount of L2TP tunnel setup attempts.
Discontinuity is indicated by usrL2tpStatsCountersResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.55.7.1.2 |
usrL2tpStatsTunnelSetupCompletedsCount of L2TP tunnel setups completed (L2TP tunnel
setup attempts that reached the established state).
Discontinuity is indicated by usrL2tpStatsCountersResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.55.7.1.3 |
usrL2tpStatsTunnelSetupFailedsCount of L2TP tunnel setups that failed (L2TP tunnel
setup attempts that terminated without reaching the
established state).
Discontinuity is indicated by usrL2tpStatsCountersResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.55.7.1.4 |
usrL2tpStatsCountersResetTimeReading:
Time the L2TP statistics counters were last reset.
Resetting counters causes a discontinuity in the monotonically
increasing value of the counters. Management stations that
sample these counters need also to sample this object so that
they can know that a discontinuity occured with respect to the
previous sample. Its value is number of seconds since EPOCH.
EPOCH is seconds since 00:00:00 UTC, Jan 1, 1970.
Writing:
Writing 0 causes the following global L2TP stats to be reset
to 0:
l2tpStatsFailedAuthentications
l2tpStatsMalformedPackets
l2tpStatsControlTunnelRecvPackets
l2tpStatsControlTunnelWithDataRecvPackets
l2tpStatsControlTunnelWithoutDataRecvPackets
l2tpStatsProcessedControlTunnelRecvPackets
l2tpStatsInSequenceControlTunnelRecvPackets
l2tpStatsOutSequenceControlTunnelRecvPackets
l2tpStatsInOrderControlTunnelRecvPackets
l2tpStatsOutOfOrderControlTunnelRecvPackets
l2tpStatsFlowDiscardedControlTunnelRecvPackets
l2tpStatsOutOfOrderDiscardedControlTunnelRecvPackets
l2tpStatsControlTunnelSendPackets
l2tpStatsControlTunnelWithdataSendPackets
l2tpStatsControlTunnelWithoutdataSendPackets
l2tpStatsControlTunnelFlowControlTimeouts
l2tpStatsLocalControlTunnelFlowControlEnables
l2tpStatsRemoteControlTunnelFlowControlEnables
l2tpStatsControlTunnelReassemblyTimeouts
l2tpStatsDataTunnelRecvPackets
l2tpStatsDataTunnelWithdataRecvPackets
l2tpStatsDataTunnelWithoutdataRecvPackets
l2tpStatsProcessedDataTunnelRecvPackets
l2tpStatsInSequenceDataTunnelRecvPackets
l2tpStatsOutSequenceDataTunnelRecvPackets
l2tpStatsInOrderDataTunnelRecvPackets
l2tpStatsOutOfOrderDataTunnelRecvPackets
l2tpStatsFlowDiscardedDataTunnelRecvPackets
l2tpStatsOutOfOrderDiscardedDataTunnelRecvPackets
l2tpStatsDataTunnelSendPackets
l2tpStatsDataTunnelWithdataSendPackets
l2tpStatsDataTunnelWithoutdataSendPackets
l2tpStatsDataTunnelFlowControlTimeouts
l2tpStatsLocalDataTunnelFlowControlEnables
l2tpStatsRemoteDataTunnelFlowControlEnables
l2tpStatsDataTunnelReassemblyTimeouts
usrL2tpStatsTunnelSetupAttempts
usrL2tpStatsTunnelSetupCompleteds
usrL2tpStatsTunnelSetupFaileds
Writing other values are rejected.rw Unsigned32 .1.3.6.1.4.1.77.1.1.55.7.1.5 |