USR-IP-CFG-MIB
AI MIB Summary
The USR-IP-CFG-MIB enables monitoring and configuration of IP network parameters, including interface addresses, subnet masks, and gateway settings, on CommWorks enterprise hardware. It provides programmatic access to static IP configuration objects for troubleshooting connectivity and validating network topology on USR-branded devices.
The commWorks enterprise defined MIB objects IP Configuration.
Main OID:
usrIpCfg.1.3.6.1.4.1.77.1.1.13
27
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
usrIpCfgThe commWorks enterprise defined MIB objects IP
Configuration. MODULE-IDENTITY .1.3.6.1.4.1.77.1.1.13 |
IMPORTSThe commWorks enterprise defined MIB objects IP
Configuration. Unknown .1.3.6.1.4.1.77.1.1.13 |
usrIpCfgNetworkTableThis table is the same as the usrIpNetworkTable definied above,
with the exception that it is indexed by the Network Name defined
in the usrCfgNetworkTable. This table will be used only by the
the Configuration File Manager process to load permament configuration
file records for named networks at system boot time. Any attempt
to set this table from either the CLI process or SNMP will
fail. SEQUENCE OF UsrIpCfgNetworkEntry .1.3.6.1.4.1.77.1.1.13.1 |
usrIpCfgNetworkEntryA (conceptual) entry for one IP Network. UsrIpCfgNetworkEntry .1.3.6.1.4.1.77.1.1.13.1.1 |
usrIpCfgNetNameThe name of this network. Network names can either be assigned
by a network administrator when the Network is created. Or it will
generated by the Configuration Process when it adds the network to
its internal table. DisplayString .1.3.6.1.4.1.77.1.1.13.1.1.1 |
usrIpCfgNetBcastAddrThe value of the least-significant bit in the IP
broadcast address used for sending datagrams on
the (logical) interface associated with the IP
address of this entry. For example, when the
Internet standard all-ones broadcast address is
used, the value will be 1. This value applies to
both the subnet and network broadcasts addresses
used by the entity on this (logical) interface.rw Integer32 .1.3.6.1.4.1.77.1.1.13.1.1.4 |
usrIpCfgNetReasmMaxSizeThe size of the largest IP datagram which this
entity can re-assemble from incoming IP fragmented
datagrams received on this interface.rw Integer32 .1.3.6.1.4.1.77.1.1.13.1.1.5 |
usrIpCfgNetRoutingProtocolThe routing protocol to be operated on this IP network. Currently,
there are none, rip version 1 and rip version 2.rwdeprecated Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.6 |
usrIpCfgNetSendDefaultRoutePolicyAllows disabling or enabling of the send default route RIP policy.
This policy is enabled by default.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.7 |
usrIpCfgNetSendRoutesPolicyAllows disabling or enabling of the send routes RIP policy.
This policy is enabled by default.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.8 |
usrIpCfgNetSendSubnetsOnlyPolicyAllows disabling or enabling of the send subnets only RIP policy.
This policy is enabled by default.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.9 |
usrIpCfgNetAcceptDefaultRoutePolicyAllows disabling or enabling of the accept default route RIP policy.
This policy is disabled by default.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.10 |
usrIpCfgNetSilentPolicyAllows disabling or enabling of the silent policy.
This policy is disabled by default.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.11 |
usrIpCfgNetSplitHorizonPolicyAllows disabling or enabling of the split horizon RIP policy.
This policy is enabled by default.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.12 |
usrIpCfgNetPoisonReversePolicyAllows disabling or enabling of the poison reverse RIP policy.
This policy is enabled by default.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.13 |
usrIpCfgNetFlashUpdatePolicyAllows disabling or enabling of the flash update RIP policy.
This policy is enabled by default.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.14 |
usrIpCfgNetSimpleAuthenPolicyAllows disabling or enabling of the simple authentication RIP policy.
This policy is valid for RIPV2 only and is enabled by default when
RIPV2 is selected as the routing protocol.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.15 |
usrIpCfgNetSendRipV1CompatPolicyAllows disabling or enabling of the send RipV1 compatible policy.
This policy is enabled by default.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.16 |
usrIpCfgNetRcvRipV1PolicyAllows disabling or enabling of the receive RipV1 policy.
This policy is enabled by default.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.17 |
usrIpCfgNetRcvRipV2PolicyAllows disabling or enabling of the receive RipV2 policy.
This policy is enabled by default.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.18 |
usrIpCfgNetRip2AuthKeythis variable defines the authentication key for ip rip2. when
this varialbe is set, by default, the authentication type is also
set to simple.rw OCTET STRING .1.3.6.1.4.1.77.1.1.13.1.1.19 |
usrIpCfgNetRoutingMetricThe routing metric for using this IP network.rw Integer32 .1.3.6.1.4.1.77.1.1.13.1.1.20 |
usrIpCfgNetExportMetricThe metric for advertising routes through this IP network.rw Integer32 .1.3.6.1.4.1.77.1.1.13.1.1.21 |
usrIpCfgNetRoutingNoneSpecifies that no routing protocol will be operating on this
IP network.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.22 |
usrIpCfgNetRoutingRipV1Specifies that the RIPv1 routing protocol will be operating
on this IP network.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.23 |
usrIpCfgNetRoutingRipV2Specifies that the RIPv2 routing protocol will be operating
on this IP network.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.24 |
usrIpCfgNetRoutingOspfSpecifies that the OSPF routing protocol will be operating
on this IP network.rw Enumeration .1.3.6.1.4.1.77.1.1.13.1.1.25 |