USR-GWCWAN-MIB
AI MIB Summary
The USR-GWCWAN-MIB module provides SNMP management objects for monitoring and configuring commWorks enterprise network elements, specifically targeting Wide Area Network (WAN) connectivity parameters, interface states, and traffic statistics on US Robotics hardware.
The commWorks enterprise defined MIB objects for the Network Element.
Main OID:
usrGwcwan.1.3.6.1.4.1.77.1.1.58
54
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
54 total| Object Name |
|---|
usrGwcwanThe commWorks enterprise defined MIB objects
for the Network Element. MODULE-IDENTITY .1.3.6.1.4.1.77.1.1.58 |
IMPORTSThe commWorks enterprise defined MIB objects
for the Network Element. Unknown .1.3.6.1.4.1.77.1.1.58 |
usrGwcwanIfTableA list of Gwcwan interface entries. SEQUENCE OF UsrGwcwanIfEntry .1.3.6.1.4.1.77.1.1.58.1 |
usrGwcwanIfEntryParameter values for a Gwcwan interfaces. UsrGwcwanIfEntry .1.3.6.1.4.1.77.1.1.58.1.1 |
usrGwcwanIfIndexThe value of ifIndex for the port. By convention
and if possible, hardware port numbers map directly
to external connectors. The value for each port must
remain constant at least from one re-initialization
of the network management agent to the next.ro InterfaceIndex (USR-DEFINITIONS-MIB) .1.3.6.1.4.1.77.1.1.58.1.1.1 |
usrGwcwanIfNameThe textual name of the interface. It is of the form
wan:# for physical interfaces and of the form wan:#/linkname
for logicalinterfaces where # is the physical
interface this logical interface resides on, and
linkname is assigned by the administrator.ro DisplayString .1.3.6.1.4.1.77.1.1.58.1.1.2 |
usrGwcwanIfTypeThis helps determine the type of physical interface /
NIC Type/ WAN Driver Type.ro Enumeration .1.3.6.1.4.1.77.1.1.58.1.1.3 |
usrGwcwanV35IfTableA list of Gwcwan V35 virtual interface entries. SEQUENCE OF UsrGwcwanV35IfEntry .1.3.6.1.4.1.77.1.1.58.2 |
usrGwcwanV35IfEntryParameter values for V35 Gwcwan virtual interface. UsrGwcwanV35IfEntry .1.3.6.1.4.1.77.1.1.58.2.1 |
usrGwcwanV35IfIndexThe value of ifIndex for the port. By convention
and if possible, hardware port numbers map directly
to external connectors. The value for each port must
remain constant at least from one re-initialization
of the network management agent to the next.ro InterfaceIndex (USR-DEFINITIONS-MIB) .1.3.6.1.4.1.77.1.1.58.2.1.1 |
usrGwcwanV35ClockRefModeValid only when usrGwcwanIfType is usrGwcwanV35.
The clock ref mode of this v35 interfacerw Enumeration .1.3.6.1.4.1.77.1.1.58.2.1.2 |
usrGwcwanV35ClockInvertedModeValid only when usrGwcwanIfType is usrGwcwanV35.
The Clock inverted moderw Enumeration .1.3.6.1.4.1.77.1.1.58.2.1.3 |
usrGwcwanV35FlagIdlePatternValid only when usrGwcwanIfType is usrGwcwanV35.
This mib is an addon to rfc1659 rs232SyncPortIdlePattern mib.
rfc1659 does not support idle pattern as flag (7F).
If this flag is set to flagIdlePattern, then Pilgrim sets wapi
idle pattern to flag. Other wise, Pilgrim sets wapi according
the value set in rs232SyncPortIdlePattern.rw Enumeration .1.3.6.1.4.1.77.1.1.58.2.1.4 |
usrGwcwanV35PortTypeThe port's hardware type. This is actually a subset of
rs232PortType parameter defined by RFC1659. It was
necessary to re-define this variable since Write access
is not allowed to the parameter defined by RFC1659.rw Enumeration .1.3.6.1.4.1.77.1.1.58.2.1.5 |
usrGwcwanT1E1IfTableA list of Gwcwan T1E1 virtual interface entries. SEQUENCE OF UsrGwcwanT1E1IfEntry .1.3.6.1.4.1.77.1.1.58.3 |
usrGwcwanT1E1IfEntryParameter values for T1E1 Gwcwan virtual interface. UsrGwcwanT1E1IfEntry .1.3.6.1.4.1.77.1.1.58.3.1 |
usrGwcwanT1E1IfIndexThe value of ifIndex for the port. By convention
and if possible, hardware port numbers map directly
to external connectors. The value for each port must
remain constant at least from one re-initialization
of the network management agent to the next.ro InterfaceIndex (USR-DEFINITIONS-MIB) .1.3.6.1.4.1.77.1.1.58.3.1.1 |
usrGwcwanDS1CableLenValid only when usrGwcwanIfType is usrGwcwanDS1.
The cable length of DS1 interface. If the interface is
long haul, use usrGwcwanDS1CableLenLongHaul. Otherwise,
use specified cable length.rw Enumeration .1.3.6.1.4.1.77.1.1.58.3.1.2 |
usrGwcwanDS1LineBuildoutValid only when usrGwcwanIfType is usrGwcwanDS1.
The line build out of DS1 interface.rw Enumeration .1.3.6.1.4.1.77.1.1.58.3.1.3 |
usrGwcwanWSOCKIfTableA list of Gwcwan WSOCK virtual interface entries. SEQUENCE OF UsrGwcwanWSOCKIfEntry .1.3.6.1.4.1.77.1.1.58.4 |
usrGwcwanWSOCKIfEntryParameter values for WSOCK Gwcwan virtual interface. UsrGwcwanWSOCKIfEntry .1.3.6.1.4.1.77.1.1.58.4.1 |
usrGwcwanWSOCKIfIndexThe value of ifIndex for the port. By convention
and if possible, hardware port numbers map directly
to external connectors. The value for each port must
remain constant at least from one re-initialization
of the network management agent to the next.ro InterfaceIndex (USR-DEFINITIONS-MIB) .1.3.6.1.4.1.77.1.1.58.4.1.1 |
usrGwcwanIPConnTypeValid only when usrGwcwanIfType is usrGwcwanWSOCK.
The type of IP service to use to make the sockets
connection (UDP or TCP).rw Enumeration .1.3.6.1.4.1.77.1.1.58.4.1.2 |
usrGwcwanRemoteIpValid only when usrGwcwanIfType is usrGwcwanWSOCK.
The remote IP address this virtual port sends to.rw IpAddress .1.3.6.1.4.1.77.1.1.58.4.1.3 |
usrGwcwanRemotePortValid only when usrGwcwanIfType is usrGwcwanWSOCK.
The remote UDP/IP port this virtual port sends to.rw Integer32 .1.3.6.1.4.1.77.1.1.58.4.1.4 |
usrGwcwanLocalPortValid only when usrGwcwanIfType is usrGwcwanWSOCK.
The local UDP/IP port this virtual port listens to.rw Integer32 .1.3.6.1.4.1.77.1.1.58.4.1.5 |
usrGwcwanT1E1TrapEnaTableA trap enable table that defines a column for every trap
that a DS1 entity can generate. SEQUENCE OF UsrGwcwanT1E1TrapEnaEntry .1.3.6.1.4.1.77.1.1.58.5 |
usrGwcwanT1E1TrapEnaEntryThere is one entry in this table for every DS1 that exists
in the chassis. UsrGwcwanT1E1TrapEnaEntry .1.3.6.1.4.1.77.1.1.58.5.1 |
usrGwcwanT1E1TrapEnaDS1IndexThe value of ifIndex for the DS1/ES1 port. By convention
and if possible, hardware port numbers map directly
to external connectors. The value for each port must
remain constant at least from one re-initialization
of the network management agent to the next.ro Integer32 .1.3.6.1.4.1.77.1.1.58.5.1.1 |
usrGwcwanT1E1TrapEnaYellowAlarmEnable the generation of an SNMP trap for Far-End Loss of
Frame condition (signaled by a received Yellow Alarm) on the
specified DS1. This corresponds to dsx1RcvFarEndLOF bit in
dsx1LineStatus variablerw Enumeration .1.3.6.1.4.1.77.1.1.58.5.1.2 |
usrGwcwanT1E1TrapEnaSndYellowAlarmEnable the generation of an SNMP trap for Near End Sending
Yellow Alarm condition on the specified DS1. This corresponds
to dsx1XmtFarEndLOF bit in dsx1LineStatus variablerw Enumeration .1.3.6.1.4.1.77.1.1.58.5.1.3 |
usrGwcwanT1E1TrapEnaAlarmIndSignalEnable the generation of an SNMP trap for Far End Sending
Alarm Indication Signal condition on the specified DS1. This
corresponds to dsx1RcvAIS bit in dsx1LineStatus variablerw Enumeration .1.3.6.1.4.1.77.1.1.58.5.1.4 |
usrGwcwanT1E1TrapEnaSndAlarmIndSignalEnable the generation of an SNMP trap for Near End Sending
Alarm Indication Signal condition on the specified DS1.
This corresponds to dsx1XmtAIS bit in dsx1LineStatus variablerw Enumeration .1.3.6.1.4.1.77.1.1.58.5.1.5 |
usrGwcwanT1E1TrapEnaRedAlarmEnable the generation of an SNMP trap for Near End Loss Of
Frame (in red alarm condition) condition on the specified DS1.
This corresponds to dsx1LossOfFrame bit in dsx1LineStatus variablerw Enumeration .1.3.6.1.4.1.77.1.1.58.5.1.6 |
usrGwcwanT1E1TrapEnaLossOfSignalEnable the generation of an SNMP trap for Near End Loss Of
Signal condition on the specified DS1. This corresponds to
dsx1LossOfSignal bit in dsx1LineStatus variablerw Enumeration .1.3.6.1.4.1.77.1.1.58.5.1.7 |
usrGwcwanT1E1TrapEnaloopBackEnable the generation of an SNMP trap for Near End loopback
condition on the specified DS1. This corresponds to
dsx1LoopbackState bit in dsx1LineStatus variablerw Enumeration .1.3.6.1.4.1.77.1.1.58.5.1.8 |
usrGwcwanT1E1TrapEnaRcvTestCodeEnable the generation of an SNMP trap for Near End test code
condition on the specified DS1. This corresponds to
dsx1RcvTestCode bit in dsx1LineStatus variablerw Enumeration .1.3.6.1.4.1.77.1.1.58.5.1.9 |
usrGwcwanTraps OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.58.6 |
usrGwcwanT1E1YellowAlarmThis trap is generated for an active Far-End Loss of Frame
condition (signaled by a received Yellow Alarm) on the
specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.1 |
usrGwcwanT1E1ClrYellowAlarmThis trap is generated when Far-End Loss of Frame condition
(signaled by a received Yellow Alarm) clears on the
specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.2 |
usrGwcwanT1E1SndYellowAlarmThis trap is generated for an active Near End Sending Yellow
Alarm condition on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.3 |
usrGwcwanT1E1ClrSndYellowAlarmThis trap is generated when Near End Sending Yellow
Alarm condition clears on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.4 |
usrGwcwanT1E1AlarmIndSignalThis trap is generated for an active Far End Sending Alarm
Indication Signal condition on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.5 |
usrGwcwanT1E1ClrAlarmIndSignalThis trap is generated when Far End Sending Alarm
Indication Signal condition clears on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.6 |
usrGwcwanT1E1SndAlarmIndSignalThis trap is generated for an active Near End Sending Alarm
Indication Signal condition on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.7 |
usrGwcwanT1E1ClrSndAlarmIndSignalThis trap is generated when Near End Sending Alarm
Indication Signal condition clears on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.8 |
usrGwcwanT1E1RedAlarmThis trap is generated for an active Near End Loss Of Frame
(in red alarm condition) condition on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.9 |
usrGwcwanT1E1ClrRedAlarmThis trap is generated when Near End Loss Of Frame
(in red alarm condition) condition clears on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.10 |
usrGwcwanT1E1LossOfSignalThis trap is generated for an active Near End Loss Of Signal
condition on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.11 |
usrGwcwanT1E1ClrLossOfSignalThis trap is generated when Near End Loss Of Signal condition
clears on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.12 |
usrGwcwanT1E1loopBackThis trap is generated for an active Near End loopback condition
on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.13 |
usrGwcwanT1E1ClrloopBackThis trap is generated when Near End loopback condition clears
on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.14 |
usrGwcwanT1E1RcvTestCodeThis trap is generated for an active Near End test code
condition on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.15 |
usrGwcwanT1E1ClrRcvTestCodeThis trap is generated when Near End test code condition
clears on the specified DS1. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.58.6.16 |
More MIBs from Lanmanager
Browse all LanmanagerMIBs →USR-USER-MAN-MIB
The USR-USER-MAN-MIB facilitates the monitoring and management of user authentication sessions, active login states, and access control policies on commWorks (US Robotics) network infrastructure devices. This module enables administrators to track real-time user connectivity metrics and enforce security configurations via SNMP.
461 objects→
Cip-MIB
The Cip-MIB provides enterprise-specific SNMP objects for monitoring and managing commWorks CIP (Common Industrial Protocol) devices, enabling the tracking of industrial automation session states, communication errors, and device operational parameters.
347 objects→
USR-VHA-MIB
The USR-VHA-MIB provides SNMP management access for commWorks VHA (Virtual Host Appliance) devices, enabling monitoring of virtualization-specific metrics such as session states, resource utilization, and interface statistics. This module facilitates the tracking of virtual host availability and performance parameters critical for maintaining the operational integrity of commWorks virtual infrastructure.
224 objects→
USR-FA-MIB
The USR-FA-MIB provides management objects for monitoring Wireless Foreign Agent session states, tunnel configurations, and mobility parameters on CommWorks enterprise wireless infrastructure. This module enables the tracking of mobile node registration, handover events, and Foreign Agent resource utilization within a Mobile IP environment.
192 objects→
UsrUserMan-MIB
Standard SNMP MIB module defining data structures for UsrUserMan-MIB.
183 objects→
ROBOEXEC-RESOURCES-MIB
The ROBOEXEC-RESOURCES-MIB defines commWorks enterprise-specific objects for monitoring system resource utilization and operational status of RoboExec appliances. This module provides granular visibility into device health metrics, including CPU load, memory consumption, and process states, enabling administrators to track performance thresholds and resource exhaustion on RoboExec hardware.
162 objects→