USR-CONFIG-MIB
The commWorks enterprise defined MIB objects for Configuration Management
Main OID:
usrConfig.1.3.6.1.4.1.5003.9.10.3.1.1.1
117
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
117 total| Object Name |
|---|
usrConfigThe commWorks enterprise defined MIB objects
for Configuration Management MODULE-IDENTITY .1.3.6.1.4.1.5003.9.10.3.1.1.1 |
IMPORTSThe commWorks enterprise defined MIB objects
for Configuration Management Unknown .1.3.6.1.4.1.5003.9.10.3.1.1.1 |
usrCfgVersionThe current software version of the Config Process.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.3.1.1.1.1 |
usrCfgConfigFileNameThe name of a ConfigFile to read/write permanent database records.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.3.1.1.1.2 |
usrCfgCFMStatusFlagSetting the value of this object to `save' causes the values
of the Config Group to be written out to the current config
file, which is stored in the cfgConfigFile object. While
the new ConfigFile is being written, the config process
will set the value of this flag set to `saving''. Any
attempts to set the value while it is not `normal'
(i.e. the file is currently being written to the
ConfigFile) while result in a badValue error being
returned. Setting the value to `normal' will result in no
action.rw UsrConfigStatus .1.3.6.1.4.1.5003.9.10.3.1.1.1.3 |
usrCfgCFMStatusNetFlagSetting the value of this object to `save' causes the values
of all the Network Table entries to be written out to the
current config file, which is stored in the cfgConfigFile
object. While the new ConfigFile is being written, the config
process will set the value of this flag set to `saving''. Any
attempts to set the value while it is not `normal'
(i.e. the file is currently being written to the
ConfigFile) while result in a badValue error being
returned. Setting the value to `normal' will result in no
action.rw UsrConfigStatus .1.3.6.1.4.1.5003.9.10.3.1.1.1.4 |
usrCfgCFMStatusIfFlagSetting the value of this object to `save' causes the values
of all the IF Table entries to be written out to the
current config file, which is stored in the cfgConfigFile
object. While the new ConfigFile is being written, the config
process will set the value of this flag set to `saving''. Any
attempts to set the value while it is not `normal'
(i.e. the file is currently being written to the
ConfigFile) while result in a badValue error being
returned. Setting the value to `normal' will result in no
action.rw UsrConfigStatus .1.3.6.1.4.1.5003.9.10.3.1.1.1.5 |
usrCfgCFMStatusNetSvcFlagSetting the value of this object to `save' causes the values
of the Network Service Table to be written out to the
current config file, which is stored in the usrCfgConfigFile
object. While the new ConfigFile is being written, the config
process will set the value of this flag set to `saving''. Any
attempts to set the value while it is not `normal'
(i.e. the file is currently being written to the
ConfigFile) while result in a badValue error being
returned. Setting the value to `normal' will result in no
action.rw UsrConfigStatus .1.3.6.1.4.1.5003.9.10.3.1.1.1.6 |
usrCfgNetTableA list of Networks currently configured in the Netserver
system. SEQUENCE OF UsrCfgNetEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.7 |
usrCfgNetEntryAn entry containing management information applicable to a
particular network. UsrCfgNetEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1 |
usrCfgNetNameThe name of this network. Network names can either be assigned
by a network administrator when the Network is created. Or it will
generated by the Configuration Process when it adds the network to
its internal table. Generated network names will be formed by
concatenating the ascii forms of the protocol name, network address
and port number separated by hyphens.ro DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.1 |
usrCfgNetIfNameThe name of the interface this network runs on top of.rw UsrDisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.2 |
usrCfgNetProtoTypeThe Level 3 protocol running over this network.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.3 |
usrCfgNetAddressThe address which identifies the network. The format of
this object is dependent on the protocol running on this
network.rw UsrNetAddress .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.4 |
usrCfgNetEncapTypeThe type of encapsulation employed by this network.rw UsrCfgEncapsulations .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.5 |
usrCfgNetStatusThe current status of the network entry. The value of this
object can be set to one of four values, 'enable', 'disable',
'invalid' or 'reconfigure'.
Setting the value of 'invalid' causes the network to be removed.
The 'enable' value enables a network currently in the 'disable'
state.
Setting the value to 'disable', disables a network in the
'enable' state.
'reconfigure' will result in the network temporarily disabled
and re-configured using any non-NULL values in the usrCfgNewNet...
objects. This allows a Network Manager to change an existing
network's address, encapsulation, or interface without having to
remove the router from service. This status can only be used on
static IP networks. Any attempt to 'reconfigure' any other type of
network will result in a 'badValue' error.
Attempts to set the value of this object to any other values
is illegal and will cause a 'badValue' error to be generated.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.6 |
usrCfgNetLogicalIdThe logical identifier for this network assigned by the Pilgrim
forwarder process which owns this network. The value of the
LogicalId is returned to the Config Process in the
FWD_ENABLE_NETWORK_RSP IPC message.ro UsrNetLogicalId .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.7 |
usrCfgNetTypeNetworks configured via network management interaction are
static networks.
Networks created to service incoming calls are dynamic networks.
Networks created automatically every time the system reboots (i.e.
the IP Loopback Network are automatic networks. Automatic networks
are essentially read-only network entries, the cannot be enabled,
disabled or deleted.ro Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.8 |
usrCfgNetUserNameThe name of a user (location) associated with a dedicated circuit
type network. This object's value is only meaningful for Data Link
Control networks (PPP, SLIP, Frame Relay, etc...) over
dedicated/permanent circuits. This name is passed to the Data
Link Control Process when the network is created
(ADD NETWORK command). The DLCP will use the name to lookup a
location profile in User Manager database. For non-dedicated
circuit networks, this object's value will always be a
NULL string. Attempts to SET or change the value of this object
for non-dedicated circuit networks will fail.rw UsrUserName .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.9 |
usrCfgNetCFMStatusFlagSetting the value of this object to `save' causes the values
of this Network Table entry to be written out to the
current config file, which is stored in the usrCfgConfigFile
object. While the new ConfigFile is being written, the config
process will set the value of this flag set to `saving''. Any
attempts to set the value while it is not `normal'
(i.e. the file is currently being written to the
ConfigFile) while result in a badValue error being
returned. Setting the value to `normal' will result in no
action.rw UsrConfigStatus .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.10 |
usrCfgNewNetIfNameThe name of the interface this network runs on top of.rw UsrDisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.11 |
usrCfgNewNetAddressThe address which identifies the network. The format of
this object is dependent on the protocol running on this
network.rw UsrNetAddress .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.12 |
usrCfgNewNetEncapTypeThe type of encapsulation employed by this network.rw UsrCfgEncapsulations .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.13 |
usrCfgNetRemoteAddressThe IP address of the remote router for the network
configured as an IP Numbered-Point-To-Point network.rw UsrNetAddress .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.14 |
usrCfgNetWanTypeThe Wan Type determines the type of the IP network
created on top of the WAN (eg., Frame Relay).rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.15 |
usrCfgNetRpPiNormalThis flag determines whether the interface being defined
is a generic one, or one which supports redundancy of
RP and PI interface.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.17 |
usrCfgNetVlanTagThis determines the VLAN tag that needs to be added to all
the packets going through this network. By default this value is 0.
If zero is set then it means that no VLAN tag will be added.rw Integer32 .1.3.6.1.4.1.5003.9.10.3.1.1.1.7.1.18 |
usrCfgIfTableA list of Interface Names currently configured in the Netserver
system. SEQUENCE OF UsrCfgIfEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.8 |
usrCfgIfEntryAn entry containing management information applicable to a
particular Interface. UsrCfgIfEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1 |
usrCfgIfNameThe name of this interface. The value of this
object is the same as the ifName object of the standard Interface
table (RFC-1573). This table allows the Pilgrim CLI process to
translate Interface names into ifIndex values. All the other tables
in the Pilgrim system relating to interfaces are indexed by the
ifIndex value of the related interface. UsrDisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.1 |
usrCfgIfIndexThe interface index of this interface taken from the standard
(RFC-1573) Interface MIB.ro Integer32 .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.2 |
usrCfgIfAdminStatusThe permanently configured state of the interface.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.3 |
usrCfgIfLinkUpDownTrapEnableThe permanently configured value, which indicates whether
linkUp/linkDown traps should be generated for this
interface.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.4 |
usrCfgIfPromiscuousModeThis object has a value of DISABLED if this interface
only accepts packets/frames that are addressed to this
station. This object has a value of ENABLED when the
station accepts all packets/frames transmitted on the
media. The value ENABLED is only legal on certain
types of media. If legal, setting this object to a
value of ENABLED may require the interface to be reset
before becoming effective.
The value of ifPromiscuousMode does not affect the
reception of broadcast and multicast packets/frames by
the interface.
This functionality is not supported for wireless
components.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.5 |
usrCfgIfInFilterThe name of the input filter for a specific interface.rw DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.6 |
usrCfgIfOutFilterThe name of the output filter for a specific interface.rw DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.7 |
usrCfgIfFilterAccessThis switch will allow user filters to override the
interface filters. If set to 'off', user filters do not
override the interface filters. If set to 'on' user
filters can override the interface filters.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.8 |
usrCfgIfSdlCmdsThe Software Download Commands are as follows:
normal:
This mode is for normal operation.
download:
This command trigger the download for this device.
forceLinkDown:
Force the Link to go down while a connection is in progress
and download.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.9 |
usrCfgIfSdlCmdResultsThe Software Download status are as follows:
notSelected:
The particular Device is not selected for software download.
This mode is for normal operation.
pending:
This Device was selected for download, but it has not started.
active:
This Device is currently being downloaded to.
failed:
The download process failed for some reason in this device.
complete:
This Device was successfully downloaded.
portBusy:
This Device is busy.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.10 |
usrCfgIfSysIndexThe index of the Positron System Table that this interface
belongs to. The value of this object will always be zero on
non-Positron systems.ro Integer32 .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.11 |
usrCfgIfManualSwitchThis switch controls the Interface status, when a SAVE ALL
is issued and it was not disabled by the user. It should not
be modified, it is only used by CFM.rw Integer32 .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.12 |
usrCfgIfPolicyThe name of the policy for a specific interface.rw UsrDisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.13 |
usrCfgIfPolicyAccessThis switch will allow user policy to override the
interface policy. If set to 'off', user policies do not
override the interface policy. If set to 'on' user
policy can override the interface policy.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.14 |
usrCfgIfTypeThe type of interface, distinguished according to
the physical/link protocol(s) immediately below
the network layer in the protocol stack.ro Integer32 .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.15 |
usrCfgIfEthernetOperModeThis Variable allows one to change the ethernet device operating
mode. Modes could be 10Half/10Full/100Half/100Full or Auto Negoti
ate. This is applicable only for ETHERNET Interfaces supported on
the HARC-I and HARC-II boards with DP83840A or Level-1 Phys.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.8.1.25 |
usrCfgModuleTableA list of RoboExec Software modules currently configured in the
Netserver system. SEQUENCE OF UsrCfgModuleEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.9 |
usrCfgModuleEntryAn entry containing management information applicable to a
particular Module. UsrCfgModuleEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.9.1 |
usrCfgModNameThe name of this module. DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.9.1.1 |
usrCfgModTypeThe module type.ro Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.9.1.2 |
usrCfgModFileNameThe module's down-loadable file name. For 'linked' modules
the value will always be a zero length string, and no
SET operations will be allowed. If no file name is specified
when a new entry is added to the table, the Config Process will
attempt to load the file '@file//<usrCfgModName.modro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.3.1.1.1.9.1.3 |
usrCfgModCfgFileNameThe module's Configuration file name. This file contains the
module's permanent configuration records. The value of this
object is passed to the module's master process's initialization
routine via the 'init_arg' parameter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.3.1.1.1.9.1.4 |
usrCfgModDescrA longer string describing the module.ro DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.9.1.5 |
usrCfgModMasterProcessThe name of the master process of this module.ro DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.9.1.6 |
usrCfgModStatusStatus flags to control and display the module's current state.
Only the values 'terminate' and 'unload' may be set by a
Network Manager process. Adding a new entry to the table will
trigger the Config Process to load the module.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.9.1.7 |
usrCfgAvailServiceTableThis table defines the available services from the router. SEQUENCE OF USRCfgAvailServiceEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.10 |
usrCfgAvailServiceEntryAn entry containing management information for a
particular available service. USRCfgAvailServiceEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.10.1 |
usrCfgAvailServiceIndexAn index into this table. Integer32 .1.3.6.1.4.1.5003.9.10.3.1.1.1.10.1.1 |
usrCfgAvailServiceNameThe handle by which this service is known.ro DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.10.1.2 |
usrCfgAvailServiceDescriptionA textual description of the service.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.3.1.1.1.10.1.3 |
usrCfgAvailServiceTypeWhat type of service does this entry describe?.ro Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.10.1.4 |
usrCfgAvailServiceProtocolThis describes the Transport protocol on which the service resides.ro Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.10.1.5 |
usrCfgAvailServiceModuleNameThe Pilgrim module which implements this service..ro DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.10.1.6 |
usrCfgNetworkServiceTableThis table defines the Network services provided by Pilgrim SEQUENCE OF UsrCfgNetworkServiceEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.11 |
usrCfgNetworkServiceEntryAn entry containing management information for a
particular network service. UsrCfgNetworkServiceEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.11.1 |
usrCfgNetworkServiceAdminNameThe name by which the administrator identifies this service. DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.11.1.1 |
usrCfgNetworkServiceNameThe available service providing this network service.
Must be the an entry from the Available Services Table.rw DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.11.1.2 |
usrCfgNetworkServiceSocketNumberThe number of the socket for this service.rw INTEGER .1.3.6.1.4.1.5003.9.10.3.1.1.1.11.1.3 |
usrCfgNetworkServiceAncillaryDataThis specifies any other data that the service needs
for its definition. To reset this SET to 'none'.rw OCTET STRING .1.3.6.1.4.1.5003.9.10.3.1.1.1.11.1.4 |
usrCfgNetworkServiceCloseActiveServicesThis variable determines if active sessions using this service
are closed when the service is set to inactive or invalidrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.3.1.1.1.11.1.5 |
usrCfgNetworkServiceStatusSetting this variable to delete removes the service.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.11.1.6 |
usrCfgNetworkServiceCFMStatusFlagSetting the value of this object to `save' causes the values
of this Network Service Table entry to be written out to the
current config file, which is stored in the usrCfgConfigFile
object. While the new ConfigFile is being written, the config
process will set the value of this flag set to `saving''. Any
attempts to set the value while it is not `normal'
(i.e. the file is currently being written to the
ConfigFile) while result in a badValue error being
returned. Setting the value to `normal' will result in no
action.rw UsrConfigStatus .1.3.6.1.4.1.5003.9.10.3.1.1.1.11.1.7 |
usrCfgRebootFlagSetting the value of this object to `reboot' causes the
the system to gracefully shutdown and then reboot. Setting
the value to `shutdown' causes the system to shutdown and not
reboot automatically. The value `resetConfiguration' will
reset the system configuration to the 'factory default'
configuration and then reboot the system. Setting
the value to `normal' will result in no action.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.12 |
usrCfgTransmitAuthenNameThe System wide transmit authentication user name.rw UsrUserName .1.3.6.1.4.1.5003.9.10.3.1.1.1.13 |
usrCfgSystemVersionThe software release version of this system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.3.1.1.1.14 |
usrCfgImageFileNameThe file name of the software image which this product loads
when the system reboots. The value of this object is used by the
USR Access Router Manager when it downloads a new version of the
router software.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.3.1.1.1.15 |
usrCfgDownLoadStatusThis value is used to prepare the system to receive a
new system image via TFTP. A Network Management
station initiates a system image download by setting the
value of this object to 'triggerDownLoad'. The system then sets
the state to 'deletingImageFile', while it removes the current
image file from the flash file system. This frees up space in the
flash file system for the new image.
When the old image file is deleted, the value of this will be
changed to 'readyForDownLoad'. The NMS is expected to poll
this MIB object until this state is reached. Then it can
begin a TFTP download of the new image file.
(NOTE: if the system crashes or reboots during the
'deleteingImageFile' or 'readyForDownLoad' states, the system
will NOT reboot, and the image must be update via a console
port Software Down Load.)
After the new system image TFTP download has been completed,
the NMS **MUST** set this object back to the 'normal' state.
A system shutdown or reboot via the usrCfgRebootFlag object
will not be allowed unless the this object has been reset to
'normal'.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.16 |
usrCfgLossOfServiceCheckingSpecifies whether the configurator will allow the modems to
be busied out if a loss of service is detected.
This feature may not be available on all systems.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.3.1.1.1.17 |
usrCfgBulkFileGroup OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.3.1.1.1.18 |
usrCfgBulkFileStatusThis object is used to allow the system to prepare a
Bulk configuration file that is retrievable via TFTP.
A bulk configuration file is created by setting the
value of this object to 'createBulkFile'. The system
then sets this object to 'creatingBulkFile' and
concatenates the individual .cfg files into a single
file indicated by the object usrCfgBulkFileName.
The individual .cfg files can be restored by setting
the value of this object to 'restoreBulkFile'. The
system then sets this object to 'restoringBulkFile'
and splits the file indicated by the object
usrCfgBulkFileName into the individual .cfg files.
Note: the file indicated by the object usrCfgBulkFileName
must be present in the file system for this to succeed.
The operation is completed when the value of this object
is set back to 'normal' or 'bulkFileError' which indicates
that an error occurred.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.18.1 |
usrCfgBulkFileNameThis is the name of the Bulk File that will be acted upon
when usrCfgBulkFileStatus is set to 'createBulkFile' or
'restoreBulkFile'.rw DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.18.2 |
usrCfgBulkFileErrorMessageWhen the value of usrCfgBulkFileStatus is 'bulkFileError',
this object will indicate the error that occurred.ro OCTET STRING .1.3.6.1.4.1.5003.9.10.3.1.1.1.18.3 |
usrConfigTraps OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.3.1.1.1.19 |
usrConfigTrapsv2The events for Configuration Management traps OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.3.1.1.1.19.0 |
usrCfgDynNetCreatedA usrCfgDynNetCreated message signifies that the sending
CommWorks Remote Access Router has just established a
Dynamic Network to service a dialup network user. NOTIFICATION-TYPE .1.3.6.1.4.1.5003.9.10.3.1.1.1.19.0.1 |
usrCfgDynNetRemovedA usrCfgDynNetRemoved trap signifies that the sending
CommWorks Remote Access Router has just removed a
Dynamic Network associated with a recently disconnected
dialup network user NOTIFICATION-TYPE .1.3.6.1.4.1.5003.9.10.3.1.1.1.19.0.2 |
usrCfgLinkDownA usrCfgLinkDown trap signifies that the SNMP entity, acting in
an agent role, has detected that the ifOperStatus object for
one of its communication links is about to enter the down
state from some other state (but not from the notPresent
state). This other state is indicated by the included value
of ifOperStatus. usrCfgSlot is the slot number holding the blade. NOTIFICATION-TYPE .1.3.6.1.4.1.5003.9.10.3.1.1.1.19.0.3 |
usrCfgLinkUpA usrCfgLinkUp trap signifies that the SNMP entity, acting in an
agent role, has detected that the ifOperStatus object for
one of its communication links left the down state and
transitioned into some other state (but not into the
notPresent state). This other state is indicated by the
included value of ifOperStatus.
usrCfgSlot is the slot number holding the blade. NOTIFICATION-TYPE .1.3.6.1.4.1.5003.9.10.3.1.1.1.19.0.4 |
usrCfgTunnelConnTableA list of dynamic tunneling connections currently
active in the Netserver system. SEQUENCE OF UsrCfgTunnelConnEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.20 |
usrCfgTunnelConnEntryAn entry containing management information applicable to a
particular Connection. UsrCfgTunnelConnEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.20.1 |
usrCfgTunnelConnIfNameThe name of this dynamic tunneling interface. DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.20.1.1 |
usrCfgTunnelConnUserNameThe name of the user for this connection.ro OCTET STRING .1.3.6.1.4.1.5003.9.10.3.1.1.1.20.1.2 |
usrCfgTunnelConnTunnelTypeThe tunneling protocol used for this connection.ro Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.20.1.3 |
usrCfgTunnelConnStartTimeThe start time of the connection.ro Integer32 .1.3.6.1.4.1.5003.9.10.3.1.1.1.20.1.4 |
usrCfgSecurityServiceSpecifies the security service client process that gets started
at boot time.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.21 |
usrCfgLogicalIfTableA list of Logical Interface Names currently configured in the Netserver
system. SEQUENCE OF UsrCfgLogicalIfEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.22 |
usrCfgLogicalIfEntryAn entry containing management information applicable to a
particular Interface. UsrCfgLogicalIfEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1 |
usrCfgLogicalIfNameThe name of this interface.rw DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.1 |
usrCfgLogicalIfNonObjectFix for compiler which doesn't accept table without
any auxiliary objects! Code will return NO_SUCH_OBJECT.roobsolete Integer32 .1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.2 |
usrCfgLogicalIfRefTableA list of Logical Interface Names and Index. This table is used as a reference for
retrieving the stored index of LogicalIf SEQUENCE OF UsrCfgLogicalIfRefEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.23 |
usrCfgLogicalIfRefEntryAn entry containing management information applicable to a
particular Interface. UsrCfgLogicalIfRefEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.23.1 |
usrCfgLogicalIfRefNameThe name of this interface.rw DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.23.1.1 |
usrCfgLogicalIfRefIndexThe index of this logical interface.rw Integer32 .1.3.6.1.4.1.5003.9.10.3.1.1.1.23.1.2 |
usrCfgResetEEpromStatusSpecifies whether boot prom needs to be initialised.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.24 |
usrCfgModemGroupFilterTablelist of filter operations in a particular modem group.
Obsolete : This is no longer used.obsolete SEQUENCE OF UsrCfgModemGroupFilterEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.28 |
usrCfgModemGroupFilterEntryAn entry containing management information applicable to a
particular modem group.
Obsolete : This is no longer used.obsolete UsrCfgModemGroupFilterEntry .1.3.6.1.4.1.5003.9.10.3.1.1.1.28.1 |
usrCfgModemGroupNameThe name of this modem group
Obsolete : This is no longer used.obsolete DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.28.1.1 |
usrCfgModemGroupFilterAccessThis is for setting a filter access for all the
interfaces in a particular modem group.
Obsolete : This is no longer used.rwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.28.1.2 |
usrCfgModemGroupInFilterThe name of the input filter for a specific modem group.
Obsolete : This is no longer used.rwobsolete DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.28.1.3 |
usrCfgModemGroupOutFilterThe name of the output filter for a specific group.
Obsolete : This is no longer used.rwobsolete DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.28.1.4 |
usrCfgTransmitPasswordSystem password transmitted with auth name, when password is not
available from other sources; reading this object returns NULLrw OCTET STRING .1.3.6.1.4.1.5003.9.10.3.1.1.1.33 |
usrCfgIpRedundancySpecifies whether the redundancy interconnect feature is enabled or not.rw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.35 |
usrCfgRpIfNameThe name of the RP interface
Returns NULL string if not configured.rw DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.36 |
usrCfgPiIfNameThe name of the PI interface
Returns NULL string if not configured.rw DisplayString .1.3.6.1.4.1.5003.9.10.3.1.1.1.37 |
usrCfgCFMStatusSettingsFlagSetting the value of this object to `save' causes the values
of the Config Group to be written out to the current config
file, which is stored in the cfgConfigFile object. While
the new ConfigFile is being written, the config process
will set the value of this flag set to `saving''. Any
attempts to set the value while it is not `normal'
(i.e. the file is currently being written to the
ConfigFile) while result in a badValue error being
returned. Setting the value to `normal' will result in no
action.rw UsrConfigStatus .1.3.6.1.4.1.5003.9.10.3.1.1.1.38 |
usrCfgNetworksConfigFileNameThe name of a ConfigFile to read/write Configurator IP Networks.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.3.1.1.1.39 |
usrCfgSlotThe non-zero slot number holding this blade.
If the slot number is not determinable, such as for the testbed,
then the value is 0.ro INTEGER .1.3.6.1.4.1.5003.9.10.3.1.1.1.40 |
usrCfgLinkUpDownTrapTypeThe type of linkUp/linkDown trap generated.
rfcTrap(1) - IF-MIB linkUp / LinkDown trap upon link up/dn
cfgTrap(2) - USR-CONFIG-MIB usrCfgLinkUp / usrCfgLinkDown upon link up/dn
rfcCfgTrap(3) - both linkUp and usrCfgLinkUp trap upon link up both
linkDown and usrCfgLinkDown trap upon link dnrw Enumeration .1.3.6.1.4.1.5003.9.10.3.1.1.1.41 |