UBQS-MULTICAST-MIB
AI MIB Summary
The UBQS-MULTICAST-MIB module enables monitoring of multicast routing tables, group membership states, and traffic statistics on Ubiquiti EdgeRouter and UniFi Switch platforms. It provides specific counters for IGMP/MLD join/leave events, multicast group counts, and interface-level packet forwarding metrics to facilitate multicast traffic analysis and troubleshooting.
This MIB module defines multicast information
Main OID:
ubiMulticastMIB.1.3.6.1.4.1.7800.100.21
89
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
89 total| Object Name |
|---|
ubiMulticastMIBThis MIB module defines multicast information MODULE-IDENTITY .1.3.6.1.4.1.7800.100.21 |
ubiMulticastMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.21.0 |
ubiIgmpSnoopVlanNotification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.21.0.1 |
ubiIgmpSnoopingMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.21.1 |
ubiIgmpSnoopVlanConfigTableTable contains VLAN based configuration information
for IGMP Snooping. SEQUENCE OF UbiIgmpSnoopVlanConfigEntry .1.3.6.1.4.1.7800.100.21.1.1 |
ubiIgmpSnoopVlanConfigEntryAn entry is created for each active VLAN in the device
and deleted when the VLAN becomes inactive. UbiIgmpSnoopVlanConfigEntry .1.3.6.1.4.1.7800.100.21.1.1.1 |
ubiIgmpSnoopVlanIndexThis object indicates the VLAN in which IGMP Snooping
is configured. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7800.100.21.1.1.1.1 |
ubiIgmpSnoopVlanEnabledWhen this object is set to 'true' IGMP Snooping
is enabled on this VLAN else disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.21.1.1.1.2 |
ubiIgmpSnoopVlanFastLeaveEnabledThis object specifies whether Fast-Leave mechanism
(also known as Immediate-Leave) is to be performed by IGMP
Snooping or not. When enabled, IGMP Snooping will remove
the interface from the group mentioned in the IGMP Leave
message received on that interface without waiting for the
IGMP Group-Specific Query to timeout to determine whether
there are any more hosts on that interface for that group.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.21.1.1.1.3 |
ubiIgmpSnoopVlanReportSuppressionEnabledWhen this object is set to 'true', IGMP Snooping will
suppress duplicate IGMP Reports. When this object is set
to 'false', all IGMP Reports are forwarded to all multicast
routers in the VLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.21.1.1.1.4 |
ubiIgmpSnoopVlanForcedSourceIPrw IpAddress .1.3.6.1.4.1.7800.100.21.1.1.1.5 |
ubiIgmpSnoopVlanRowStatuscreate or remove IGMP-snooping vlan entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.21.1.1.1.6 |
ubiIgmpSnoopVlanSnoopingQuerierWhen this object is set to 'true',
IGMP snooping will send general query.
When this object is set to 'false',
IGMP snooping will not send general query.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.21.1.1.1.7 |
ubiIgmpSnoopVlanLastMemberQueryWhen this object is set to 'true',
IGMP snooping will send group query only to last member.
When this object is set to 'false',
IGMP snooping will send group query to all members.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.21.1.1.1.8 |
ubiIgmpSnoopVlanVlantagCosThis object specifies whether VLAN tag COS in Ethernet
Header of IGMP Messages is to be filled to the configured
value or keeped by received IGMP Messages. When this
object is set to <0~7>, VLAN tag COS of forwarding or
sending IGMP Messages will be filled to configured value.
When this object is set to <8>, VLAN tag COS of received
IGMP Messages will be keeped and sended.rw Integer32 .1.3.6.1.4.1.7800.100.21.1.1.1.9 |
ubiIgmpSnoopMrouterTableTable contains VLAN based configuration information
for IGMP Snooping. SEQUENCE OF UbiIgmpSnoopMrouterEntry .1.3.6.1.4.1.7800.100.21.1.2 |
ubiIgmpSnoopMrouterEntryAn entry is created for each active VLAN in the device
and deleted when the VLAN becomes inactive. UbiIgmpSnoopMrouterEntry .1.3.6.1.4.1.7800.100.21.1.2.1 |
ubiIgmpSnoopMrouterVlanIndexThis object indicates the VLAN in which IGMP Snooping
is configured. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7800.100.21.1.2.1.1 |
ubiIgmpSnoopMrouterIfIndexThis object indicates interface index is configured. Integer32 .1.3.6.1.4.1.7800.100.21.1.2.1.2 |
ubiIgmpSnoopMrouterSVlanIDThis object indicates the VLAN in which IGMP Snooping
is configured.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7800.100.21.1.2.1.3 |
ubiIgmpSnoopMrouterRowStatuscreate or remove IGMP-snooping vlan entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.21.1.2.1.4 |
ubiIgmpSnoopStaticGroupTableTable contains VLAN based configuration information
for IGMP Snooping. SEQUENCE OF UbiIgmpSnoopStaticGroupEntry .1.3.6.1.4.1.7800.100.21.1.3 |
ubiIgmpSnoopStaticGroupEntryAn entry is created for each active VLAN in the device
and deleted when the VLAN becomes inactive. UbiIgmpSnoopStaticGroupEntry .1.3.6.1.4.1.7800.100.21.1.3.1 |
ubiIgmpSnoopStaticGroupVlanIndexThis object indicates the VLAN in which IGMP Snooping
is configured. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7800.100.21.1.3.1.1 |
ubiIgmpSnoopStaticGroupIfIndexThis object indicates port's index
is configured. Integer32 .1.3.6.1.4.1.7800.100.21.1.3.1.2 |
ubiIgmpSnoopStaticGroupAddressThis object indicates the VLAN in which IGMP Snooping
is configured.ro IpAddress .1.3.6.1.4.1.7800.100.21.1.3.1.3 |
ubiIgmpSnoopStaticGroupRowStatuscreate or remove IGMP-snooping vlan entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.21.1.3.1.4 |
ubiIgmpSnoopPortConfigAclTableTable contains VLAN based configuration information
for IGMP Snooping. SEQUENCE OF UbiIgmpSnoopPortConfigAclEntry .1.3.6.1.4.1.7800.100.21.1.4 |
ubiIgmpSnoopPortConfigAclEntryAn entry is created for each active VLAN in the device
and deleted when the VLAN becomes inactive. UbiIgmpSnoopPortConfigAclEntry .1.3.6.1.4.1.7800.100.21.1.4.1 |
ubiIgmpSnoopPortConfigAclIfIndexThis object indicates the VLAN in which IGMP Snooping
is configured. Integer32 .1.3.6.1.4.1.7800.100.21.1.4.1.1 |
ubiIgmpSnoopPortConfigAclVlanIDThis object indicates the VLAN in which IGMP Snooping
is configured. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7800.100.21.1.4.1.2 |
ubiIgmpSnoopPortConfigAclNameThis object indicates port's index
is configured.rw DisplayString .1.3.6.1.4.1.7800.100.21.1.4.1.3 |
ubiIgmpSnoopPortConfigAclRowStatuscreate or remove IGMP-snooping vlan entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.21.1.4.1.4 |
ubiIgmpSnoopReporterTable SEQUENCE OF UbiIgmpSnoopReporterEntry .1.3.6.1.4.1.7800.100.21.1.5 |
ubiIgmpSnoopReporterEntry UbiIgmpSnoopReporterEntry .1.3.6.1.4.1.7800.100.21.1.5.1 |
ubiIgmpSnoopReporterIfIndex Integer32 .1.3.6.1.4.1.7800.100.21.1.5.1.1 |
ubiIgmpSnoopReporterGroupAddress IpAddress .1.3.6.1.4.1.7800.100.21.1.5.1.2 |
ubiIgmpSnoopReporterAddress IpAddress .1.3.6.1.4.1.7800.100.21.1.5.1.3 |
ubiIgmpSnoopReporterUptimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7800.100.21.1.5.1.4 |
ubiIgmpSnoopReporterExpireTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7800.100.21.1.5.1.5 |
ubiIgmpSnoopCacheTableThe (conceptual) table listing the IP multicast groups for
which the host is a member on a particular interface. SEQUENCE OF UbiIgmpSnoopCacheEntry .1.3.6.1.4.1.7800.100.21.1.6 |
ubiIgmpSnoopCacheEntryAn entry (conceptual row) in the ubiIgmpSnoopCacheTable. UbiIgmpSnoopCacheEntry .1.3.6.1.4.1.7800.100.21.1.6.1 |
ubiIgmpSnoopCacheVlanIndexThe vlan interface for which this entry contains information
for an IP multicast group address. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.7800.100.21.1.6.1.1 |
ubiIgmpSnoopCacheIfIndexThe interface for which this entry contains information
for an IP multicast group address. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.7800.100.21.1.6.1.2 |
ubiIgmpSnoopCacheAddressThe IP multicast group address for which this entry
contains information. The InetAddressType, e.g., IPv4 or
IPv6, is identified by the ubiIgmpSnoopCacheAddressType variable
in the ubiIgmpSnoopCache table. InetAddress .1.3.6.1.4.1.7800.100.21.1.6.1.3 |
ubiIgmpSnoopCacheUpTimeThe time elapsed since this entry was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7800.100.21.1.6.1.4 |
ubiIgmpSnoopCacheExpireTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7800.100.21.1.6.1.5 |
ubiIgmpSnoopCacheLastReporterThe IP address of the source of the last membership report
received for this IP multicast group address on this
interface. If no membership report has been received, this
object has a value of 0. The InetAddressType, e.g., IPv4 or
IPv6, is identified by the ubiIgmpSnoopCacheAddressType variable
in the ubiIgmpSnoopCache table.ro InetAddress .1.3.6.1.4.1.7800.100.21.1.6.1.6 |
ubiMvrMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.21.2 |
ubiMvrGlobalConfigEnableThe enabled status of MVR function on this system.
This table is used to activate entries in the ubiMvrPortConfigTable.rw Enumeration .1.3.6.1.4.1.7800.100.21.2.1 |
ubiMvrPortConfigTableTable contains PORT based configuration information for MVR. SEQUENCE OF UbiMvrPortConfigEntry .1.3.6.1.4.1.7800.100.21.2.2 |
ubiMvrPortConfigEntryA logical row in the ubiMvrPortConfigTable. UbiMvrPortConfigEntry .1.3.6.1.4.1.7800.100.21.2.2.1 |
ubiMvrPortConfigVlanidThis object indicates vlan ID is configured.ro Integer32 .1.3.6.1.4.1.7800.100.21.2.2.1.1 |
ubiMvrPortConfigGroupaddressThis object indicates multicast group address is configured.ro IpAddress .1.3.6.1.4.1.7800.100.21.2.2.1.2 |
ubiMvrPortConfigGroupCountThis object indicates multicast group count is configured.ro Integer32 .1.3.6.1.4.1.7800.100.21.2.2.1.3 |
ubiMvrPortConfigRowStatuscreate or remove entries in the ubiMvrPortConfigEntry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.21.2.2.1.4 |
ubiIgmpStatsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.21.3 |
ubiIgmpClearStatisticsrw Enumeration .1.3.6.1.4.1.7800.100.21.3.1 |
ubiIgmpVlanStatsTable SEQUENCE OF UbiIgmpVlanStatsEntry .1.3.6.1.4.1.7800.100.21.3.2 |
ubiIgmpVlanStatsEntry UbiIgmpVlanStatsEntry .1.3.6.1.4.1.7800.100.21.3.2.1 |
ubiIgmpVlanStatsEntryCountro Counter64 .1.3.6.1.4.1.7800.100.21.3.2.1.1 |
ubiIgmpVlanStatsReportTxTotalro Counter64 .1.3.6.1.4.1.7800.100.21.3.2.1.2 |
ubiIgmpVlanStatsReportRxTotalro Counter64 .1.3.6.1.4.1.7800.100.21.3.2.1.3 |
ubiIgmpVlanStatsReportRxSuccessro Counter64 .1.3.6.1.4.1.7800.100.21.3.2.1.4 |
ubiIgmpVlanStatsReportRxUnsuccessro Counter64 .1.3.6.1.4.1.7800.100.21.3.2.1.5 |
ubiIgmpVlanStatsLeaveTxTotalro Counter64 .1.3.6.1.4.1.7800.100.21.3.2.1.6 |
ubiIgmpVlanStatsLeaveRxTotalro Counter64 .1.3.6.1.4.1.7800.100.21.3.2.1.7 |
ubiIgmpVlanStatsGeneralQueryTxTotalro Counter64 .1.3.6.1.4.1.7800.100.21.3.2.1.8 |
ubiIgmpVlanStatsGeneralQueryRxTotalro Counter64 .1.3.6.1.4.1.7800.100.21.3.2.1.9 |
ubiIgmpVlanStatsGroupSpecificQueryTxTotalro Counter64 .1.3.6.1.4.1.7800.100.21.3.2.1.10 |
ubiIgmpVlanStatsGroupSpecificQueryRxTotalro Counter64 .1.3.6.1.4.1.7800.100.21.3.2.1.11 |
ubiIgmpVlanStatsInvalidMessageRxTotalro Counter64 .1.3.6.1.4.1.7800.100.21.3.2.1.12 |
ubiIgmpSnoopMembershipCountTable SEQUENCE OF UbiIgmpSnoopMembershipEntry .1.3.6.1.4.1.7800.100.21.3.3 |
ubiIgmpSnoopMembershipCountEntry UbiIgmpSnoopMembershipEntry .1.3.6.1.4.1.7800.100.21.3.3.1 |
ubiIgmpSnoopMembershipCountro Counter64 .1.3.6.1.4.1.7800.100.21.3.3.1.1 |
ubiMldSnoopingMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.21.4 |
ubiIgmpProxyRoutingMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.21.5 |
ubiIgmpProxyRoutingIfMRouteCountTableMulticast mroute count table for interface (IGMPRT) SEQUENCE OF ProxyRoutingIfMRouteCountEntry .1.3.6.1.4.1.7800.100.21.5.1 |
ubiIgmpProxyRoutingIfMRouteCountEntryMulticast mroute count entry for interface (IGMPRT) ProxyRoutingIfMRouteCountEntry .1.3.6.1.4.1.7800.100.21.5.1.1 |
ubiIgmpProxyRoutingIfMRouteCountInterfaceInterface name for interface (IGMPRT)ro OCTET STRING .1.3.6.1.4.1.7800.100.21.5.1.1.1 |
ubiIgmpProxyRoutingOutIfMRouteCountMulticast mroute count for interface (IGMPRT)ro Counter .1.3.6.1.4.1.7800.100.21.5.1.1.2 |
ubiIgmpProxyRoutingOutIfMRouteTableMulticast mroute table for interface (IGMPRT) SEQUENCE OF ProxyRoutingOutIfMRouteEntry .1.3.6.1.4.1.7800.100.21.5.2 |
ubiIgmpProxyRoutingOutIfMRouteEntryMulticast mroute entry for interface (IGMPRT) ProxyRoutingOutIfMRouteEntry .1.3.6.1.4.1.7800.100.21.5.2.1 |
ubiIgmpProxyRoutingOutIfMRouteInterfaceInterface name of mroute entry for interface (IGMPRT)ro OCTET STRING .1.3.6.1.4.1.7800.100.21.5.2.1.1 |
ubiIgmpProxyRoutingOutIfMRouteGroupGroup IP address of mroute entry for interface (IGMPRT)ro IpAddress .1.3.6.1.4.1.7800.100.21.5.2.1.2 |
ubiIgmpProxyRoutingOutIfMRouteSourceSource IP address of mroute entry for interface (IGMPRT)ro IpAddress .1.3.6.1.4.1.7800.100.21.5.2.1.3 |
ubiMulticastMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.21.10 |
ubiMulticastMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.21.10.1 |
ubiMulticastMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.21.10.2 |
More MIBs from Ubiquoss
Browse all UbiquossMIBs →UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB
The UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for EPON (Ethernet Passive Optical Network) PON interfaces on Ubiquoss optical line terminal (OLT) hardware. It enables the definition, monitoring, and enforcement of traffic shaping, priority queuing, and bandwidth allocation policies across specific PON port groups.
342 objects→
UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB
The UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for Ubiquiti 10G-EPON Optical Line Terminals (OLTs). It enables the definition and monitoring of traffic shaping rules, bandwidth limits, and priority queues applied to specific PON profile groups within the access network.
339 objects→
UBIQUOSS-EPON-PM-GROUP-MIB
The UBIQUOSS-EPON-PM-GROUP-MIB module enables monitoring of performance metrics for Ubiquiti EPON (Ethernet Passive Optical Network) interfaces, specifically tracking traffic counters, error statistics, and link utilization data for optical line terminals and optical network units.
286 objects→
UBIQUOSS-EPON-PON-MAC-GROUP-MIB
The UBIQUOSS-EPON-PON-MAC-GROUP-MIB module provides management interfaces for monitoring and configuring MAC-layer parameters, including subscriber MAC addresses, VLAN mappings, and traffic statistics, within Ubiquiti's EPON (Ethernet Passive Optical Network) access network infrastructure.
259 objects→
UBIQUOSS-10GEPON-PM-GROUP-MIB
The UBIQUOSS-10GEPON-PM-GROUP-MIB module enables performance monitoring of Ubiquiti 10G-EPON optical line terminals and optical network units by exposing traffic counters, error statistics, and link utilization metrics. It facilitates the collection of physical layer and data link layer performance data, including bit error rates, packet drops, and interface throughput, for network capacity planning and fault isolation.
202 objects→
UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB
The UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB module enables monitoring and management of MAC layer statistics, session states, and interface counters for Ubiquiti 10G Ethernet Passive Optical Network (EPON) optical line terminals and optical network units. It provides specific visibility into 10G-EPON MAC protocol operations, including port status, traffic counters, and subscriber link metrics required for provisioning and fault isolation.
171 objects→