UBQS-SMI
The UBQS-SMI module defines the foundational Structure of Management Information (SMI) schema for Ubiquoss enterprise hardware, establishing the mandatory namespace and data type definitions required to encode specific operational metrics such as interface statistics, system resources, and device status for SNMPv2c/v3 polling.
Imported Objects
Objects
11 total| Object Name |
|---|
ubiquossThe Structure of Management Information for the Ubiquoss enterprise. MODULE-IDENTITY .1.3.6.1.4.1.7800 |
ubqsProductsubqsProducts is the root OBJECT IDENTIFIER from which sysObjectID values are assigned. Actual values are defined in UBQS-PRODUCTS-MIB. OBJECT IDENTIFIER .1.3.6.1.4.1.7800.1 |
ubiMgmtsubtree reserved for use by the Workgroup Business Unit OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2 |
lnsKtEmsAgntsubtree reserved for LNS-KT Ems Agent OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.1 |
switchAgentsubtree reserved for switch agent OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.2 |
ubiEponGroupMIBsubtree reserved for Epon Group MIB OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.500 |
ubi10GEponGroupMIBsubtree reserved for 10G Epon Group MIB OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.510 |
ubiMgmtv2ubiMgmtv2 is the main subtree for new mib development. The mibs of this subtree contains the extended information compared to ubiMgmt. For example, IPv6. OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100 |
ubiMplsGroupMIBsubtree reserved for MPLS Group MIB OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.24 |
ubiGponGroupMIBsubtree reserved for Gpon Group MIB OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.500 |
ubiPonCommonGroupMIBsubtree reserved for Pon Common Group MIB OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.600 |
More MIBs from Ubiquoss
Browse all UbiquossMIBs →The UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for EPON (Ethernet Passive Optical Network) PON interfaces on Ubiquoss optical line terminal (OLT) hardware. It enables the definition, monitoring, and enforcement of traffic shaping, priority queuing, and bandwidth allocation policies across specific PON port groups.
The UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for Ubiquiti 10G-EPON Optical Line Terminals (OLTs). It enables the definition and monitoring of traffic shaping rules, bandwidth limits, and priority queues applied to specific PON profile groups within the access network.
The UBIQUOSS-EPON-PM-GROUP-MIB module enables monitoring of performance metrics for Ubiquiti EPON (Ethernet Passive Optical Network) interfaces, specifically tracking traffic counters, error statistics, and link utilization data for optical line terminals and optical network units.
The UBIQUOSS-EPON-PON-MAC-GROUP-MIB module provides management interfaces for monitoring and configuring MAC-layer parameters, including subscriber MAC addresses, VLAN mappings, and traffic statistics, within Ubiquiti's EPON (Ethernet Passive Optical Network) access network infrastructure.
The UBIQUOSS-10GEPON-PM-GROUP-MIB module enables performance monitoring of Ubiquiti 10G-EPON optical line terminals and optical network units by exposing traffic counters, error statistics, and link utilization metrics. It facilitates the collection of physical layer and data link layer performance data, including bit error rates, packet drops, and interface throughput, for network capacity planning and fault isolation.
The UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB module enables monitoring and management of MAC layer statistics, session states, and interface counters for Ubiquiti 10G Ethernet Passive Optical Network (EPON) optical line terminals and optical network units. It provides specific visibility into 10G-EPON MAC protocol operations, including port status, traffic counters, and subscriber link metrics required for provisioning and fault isolation.