UBQS-INTERFACE-MIB
AI MIB Summary
The UBQS-INTERFACE-MIB extends the standard IF-MIB (RFC 2863) to expose vendor-specific physical interface attributes for Ubiquiti Networks (UBNT) devices, enabling the monitoring of interface status, link state, and traffic counters beyond the baseline definitions. This module facilitates granular visibility into hardware port health and performance metrics on Ubiquiti switches, routers, and access points.
A MIB module for the physical interface in IF-MIB (RFC2863).
Main OID:
ubiInterfaceMIB.1.3.6.1.4.1.7800.100.4
151
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
151 total| Object Name |
|---|
ubiInterfaceMIBA MIB module for the physical interface
in IF-MIB (RFC2863). MODULE-IDENTITY .1.3.6.1.4.1.7800.100.4 |
ubiInterfaceMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.0 |
ubiInterfaceNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.0.0 |
ubiPortAutoNegoFaultA ubiPortAutoNegoFault notification is sent
at auto negotiation failure for a particular physical
port. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.4.0.0.1 |
ubiTrafficControlNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.0.1 |
ubiLoadMonitorRisingAlarmA ubiLoadMonitorRisingAlarm notification is sent
when the ubiLoadMonitorValue crosses its rising threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.4.0.1.1 |
ubiLoadMonitorFallingAlarmA ubiLoadMonitorRisingAlarm notification is sent
when the ubiLoadMonitorValue crosses its falling threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.4.0.1.2 |
ubiTrafficControlRisingAlarmA ubiTrafficControlRisingAlarm is sent
when ubiTrafficControlOneMinRate is greater than current threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.4.0.1.3 |
ubiTrafficControlFallingAlarmA ubiTrafficControlFallingAlarm is sent
when ubiTrafficControlOneMinRate is less than current threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.4.0.1.4 |
ubiInterfaceMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1 |
ubiIfNotificationEnables OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.1 |
ubiGrp1 OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.1.1 |
ubiLinkUpDownEnabledThis variable indicates whether the system
produces the notification of linkup/down.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.1.1.1 |
ubiGrp2 OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.1.2 |
ubiPortAutoNegoFaultEnabledThis variable indicates whether the system
produces the notification of the auto negotiation
failure for a particular physical port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.1.2.1 |
ubiLoadMonitorAlarmEnabledThis variable indicates whether the system
produces the notification of ubiLoadMonitorRisingAlarm
and ubiLoadMonitorFallingAlarm.rw Bits .1.3.6.1.4.1.7800.100.4.1.1.2.2 |
ubiTrafficControlAlarmEnabledThis variable indicates whether the system
produces the notification of ubiTrafficControlRisingAlarm
and ubiTrafficControlFallingAlarm.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.1.2.3 |
ubiPortTableThis table contains objects which provide
more information about physical interface. SEQUENCE OF UbiPortEntry .1.3.6.1.4.1.7800.100.4.1.2 |
ubiPortEntryAn entry containing management information
applicable to a particular physical interface. UbiPortEntry .1.3.6.1.4.1.7800.100.4.1.2.1 |
ubiPortNameThe physical port name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.2.1.1 |
ubiPortTypeThe type of the physical port.ro PortType .1.3.6.1.4.1.7800.100.4.1.2.1.2 |
ubiPortOperStatusThe current operational status of the port.
down(1) is down
up(2) is up
disable(3) is administratively downro Enumeration .1.3.6.1.4.1.7800.100.4.1.2.1.3 |
ubiPortDuplexIndicates whether the port is operating in half-
duplex, full-duplex or auto negotiation mode.ro Enumeration .1.3.6.1.4.1.7800.100.4.1.2.1.4 |
ubiPortSpeedThe current operational speed of the port.ro Enumeration .1.3.6.1.4.1.7800.100.4.1.2.1.5 |
ubiPortAdminDuplexThe desired duplex of the port.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.2.1.6 |
ubiPortAdminSpeedThe desired speed of the port.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.2.1.7 |
ubiPortMtuThe MTU value of the port.rw Integer32 (1500..10218 ) .1.3.6.1.4.1.7800.100.4.1.2.1.8 |
ubiPortL2L3IfStateThe operational mode of the port whether the port
is layer 2 or layer 3.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.2.1.9 |
ubiPortAutoNegoFaultStateThe link is down due to auto negotiation failure.
This state indicates the state of auto negotiation
failure for a particular port. But it's used for
notification only.ro Enumeration .1.3.6.1.4.1.7800.100.4.1.2.1.10 |
ubiPortResetReset the physical port.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.2.1.11 |
ubiPortLocalSwitchingPort local-switchingrw Enumeration .1.3.6.1.4.1.7800.100.4.1.2.1.12 |
ubiPortExt OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.3 |
ubiPortExtTableThis table contains objects which provide
more information about physical interface. SEQUENCE OF UbiPortExtEntry .1.3.6.1.4.1.7800.100.4.1.3.1 |
ubiPortExtEntryAn entry containing management information
applicable to a particular physical interface. UbiPortExtEntry .1.3.6.1.4.1.7800.100.4.1.3.1.1 |
ubiPortGBICStatusThe current operational status of the equipped slot.ro Enumeration .1.3.6.1.4.1.7800.100.4.1.3.1.1.1 |
ubiPortGBICTypeThe current GBIC Type of the equipped slot.
none(0): unequipped
other(1) : equipped, none of the following list
sfp(2)
xfp(3)
sfp-plus(4)ro PortGBICTypeList .1.3.6.1.4.1.7800.100.4.1.3.1.1.2 |
ubiPortGBICSerialNumberThe serial number of this GBIC.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.3.1.1.3 |
ubiSwitchPort OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.4 |
ubiSwitchportTableA table contains the information for switchport. SEQUENCE OF UbiSwitchportEntry .1.3.6.1.4.1.7800.100.4.1.4.1 |
ubiSwitchportEntryA list of information for each switchport. UbiSwitchportEntry .1.3.6.1.4.1.7800.100.4.1.4.1.1 |
ubiSwitchportNameA textual string containing information about
the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.4.1.1.1 |
ubiSwitchportModeA port type. The possible port types are:
customerVlanPort(0) - Indicates a port is a C-tag
aware port of an enterprise VLAN aware bridge.
providerNetworkPort(1) - Indicates a port is an S-tag
aware port of a Provider Bridge or Backbone Edge
Bridge used for connections within a PBN or PBBN.
customerNetworkPort(2) - Indicates a port is an S-tag
aware port of a Provider Bridge or Backbone Edge
Bridge used for connections to the exterior of a
PBN or PBBN.
customerEdgePort(3) - Indicates a port is a C-tag
aware port of a Provider Bridge used for connections
to the exterior of a PBN or PBBN.
customerBackbonePort(4) - Indicates a port is a I-tag
aware port of a Backbone Edge Bridge's B-component.
virtualInstancePort(5) - Indicates a port is a virtual
S-tag aware port within a Backbone Edge Bridge's
I-component which is responsible for handling
S-tagged traffic for a specific backbone service
instance.
dBridgePort(6) - Indicates a port is a VLAN-unaware
member of an 802.1D bridge.
access(7)
trunk(8)
hybrid(9)rw UbiSwitchportType .1.3.6.1.4.1.7800.100.4.1.4.1.1.2 |
ubiSwitchportBridgeIdThis object is used to allocate the bridge
group id.rw UbiBridgeId (UBQS-TC) .1.3.6.1.4.1.7800.100.4.1.4.1.1.3 |
ubiSwitchportVlanNativeThe native vlan of a switchport.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7800.100.4.1.4.1.1.4 |
ubiSwitchportVlanDefaultThe default vlan of a switchport.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7800.100.4.1.4.1.1.5 |
ubiSwitchPortVlanControlTableThis table contains the control information
of vlan for switchport. SEQUENCE OF UbiSwitchPortVlanControlEntry .1.3.6.1.4.1.7800.100.4.1.4.2 |
ubiSwitchPortVlanControlEntryA list of vlan control for each switchport. UbiSwitchPortVlanControlEntry .1.3.6.1.4.1.7800.100.4.1.4.2.1 |
ubiSwitchportVlanTaggedSetThe operational set of the switchport for a specific
tagged vlan.
If a value of set is all(4), the vlan index
should be a zero.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.4.2.1.1 |
ubiSwitchportVlanUntaggedSetThe operational set of the switchport for a specific
untagged vlan.
If a value of set is all(4), the vlan index
should be a zero.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.4.2.1.2 |
ubiSwitchportVlanEgressTaggedSetThe operational set of the switchport for a egress
tagged vlan.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.4.2.1.3 |
ubiSwitchVlanStackingTableThis table contains the stacking information
of vlan for switchport. SEQUENCE OF UbiSwitchVlanStackingEntry .1.3.6.1.4.1.7800.100.4.1.4.3 |
ubiSwitchVlanStackingEntryA list of vlan stacking for each switchport. UbiSwitchVlanStackingEntry .1.3.6.1.4.1.7800.100.4.1.4.3.1 |
ubiVlanStackingModevlan-stacking moderw Enumeration .1.3.6.1.4.1.7800.100.4.1.4.3.1.1 |
ubiVlanStackingEthertypevlan-stacking ethertype (format : 0xhhhh)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.4.3.1.2 |
ubiPortTrafficControl OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.5 |
ubiLoadMonitorTableThis table contains the information of load monitoring. SEQUENCE OF UbiLoadMonitorEntry .1.3.6.1.4.1.7800.100.4.1.5.1 |
ubiLoadMonitorEntryA list of load monitoring configuration. UbiLoadMonitorEntry .1.3.6.1.4.1.7800.100.4.1.5.1.1 |
ubiLoadMonitorTypeThis object specifies the type of load monitoring.
For example, If type is input, ubiLoadMonitorVariable
should be the particular variable related to the input
statistics.ro Enumeration .1.3.6.1.4.1.7800.100.4.1.5.1.1.1 |
ubiLoadMonitorIntervalThe monitoring interval.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.7800.100.4.1.5.1.1.2 |
ubiLoadMonitorVariableThe object identifier of the particular variable
to be sampled for load monitoring.
this variable is decided by ubiLoadMonitorType.
variable mapping information for load monitoring:
type object identifier
INPUT ifHCInOctets (64bit)
OUTPUT ifHCOutOctets (64bit)
CRC ubiIfStatsInCRCErrors (64bit)
DISCARD ifInDiscards (32bit)
ERROR ifInErrors (32bit)
STORM-DISCARD ubiStormTotalDiscards (64bit)ro OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.5.1.1.3 |
ubiLoadMonitorValueThe sampling value of the statistic for the
particular variable.ro Counter64 .1.3.6.1.4.1.7800.100.4.1.5.1.1.4 |
ubiLoadMonitorCriticalThresholdThe critical threshold for the sampled statistics.rw Integer32 .1.3.6.1.4.1.7800.100.4.1.5.1.1.5 |
ubiLoadMonitorMajorThresholdThe major threshold for the sampled statistics.rw Integer32 .1.3.6.1.4.1.7800.100.4.1.5.1.1.6 |
ubiLoadMonitorUnitThe unit of the sampled statistics and
threshold value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.5.1.1.7 |
ubiLoadMonitorAlarmTypeThe alarm type. This object is used
for notification only.ro Enumeration .1.3.6.1.4.1.7800.100.4.1.5.1.1.8 |
ubiLoadMonitorRowStatusThe row status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.5.1.1.9 |
ubiLoadMonitorAlarmZoneThis object indicates the current alarm zone.ro Enumeration .1.3.6.1.4.1.7800.100.4.1.5.1.1.10 |
ubiTrafficControl OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.5.2 |
ubiTrafficControlConfig OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.5.2.1 |
ubiTrafficControlReportIntervalInterval when alarm is up/down according to traffic countrw Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.1.1 |
ubiTrafficControlObservingPeriodPeriod for counting trafficrw Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.1.2 |
ubiTrafficControlHighAlarmModeAction that is operated when traffic is over high-thresholdrw Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.1.3 |
ubiTrafficControlLowAlarmModeAction that is operated when traffic is below low-thresholdrw Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.1.4 |
ubiTrafficControlTableThe table for traffic-control configuration SEQUENCE OF UbiTrafficControlEntry .1.3.6.1.4.1.7800.100.4.1.5.2.2 |
ubiTrafficControlEntryThe entry representing traffic-control config.
Index description
a) ubiTrafficControlIfindex : interface index
b) ubiTrafficControlBaseType : base type of traffic
value - pps(1), kbps(2)
c) ubiTrafficControlTrafficType : type of traffic
value - all(1), unicast(2), broadcast(3), multicast(4)
d) ubiTrafficControlDirection : direction of traffic
value - inbound(1), outbound(2) UbiTrafficControlEntry .1.3.6.1.4.1.7800.100.4.1.5.2.2.1 |
ubiTrafficControlIfindexA unique value, greater than zero, for each interface.
It is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-initialization.ro Integer32 .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.1 |
ubiTrafficControlBaseTypeBase type of traffic.ro Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.2 |
ubiTrafficControlTypeType of traffic.
Type based on KBPS must be only all(0). remains are only for pps.ro Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.3 |
ubiTrafficControlDirectionDirection of traffic.ro Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.4 |
ubiTrafficControlHighThresholdTraffic high-threshold.
Type based on KBPS could has threshold less than 1000000.rw Integer32 .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.5 |
ubiTrafficControlLowThresholdTraffic low-threshold.
Type based on KBPS could has threshold less than 1000000.rw Integer32 .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.6 |
ubiTrafficControlActionTraffic action type.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.7 |
ubiTrafficControlStatusInterface's current status.ro Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.8 |
ubiTrafficControlAverageRateAverage rate of controlled traffic.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.9 |
ubiTrafficControlOneMinRateRate of controlled traffic per 1 minute.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.10 |
ubiTrafficControlAlarmCountNumber of alarmed times.ro Integer32 .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.11 |
ubiTrafficControlLastAlarmTimeLast alarmed timero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.12 |
ubiTrafficControlRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.5.2.2.1.13 |
ubiClearTrafficControl OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.5.2.3 |
ubiClearTrafficControlInterfaceIf value is 0, clear all interface.
If value is ifindex, clear specific interface (only physical interface)rw Integer32 .1.3.6.1.4.1.7800.100.4.1.5.2.3.1 |
ubiClearTrafficControlBaseTypeTraffic-control base type.
'none' value means all base type.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.3.2 |
ubiClearTrafficControlTypeTraffic-control type.
Type based on KBPS must be all.
'none' value means all traffic type.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.3.3 |
ubiClearTrafficControlDirectionTraffic-control direction.
'none' value means all direction.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.3.4 |
ubiClearTrafficControlOperateclear excuterw Enumeration .1.3.6.1.4.1.7800.100.4.1.5.2.3.5 |
ubiIfStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.6 |
ubiIfEgressQueueStatsTableThis table contains the information for egress
queue statistics. SEQUENCE OF UbiIfEgressQueueStatsEntry .1.3.6.1.4.1.7800.100.4.1.6.1 |
ubiIfEgressQueueStatsEntryA list of the port that configure cos feild.
that port collects the pass and drop statistics
for egress queue. UbiIfEgressQueueStatsEntry .1.3.6.1.4.1.7800.100.4.1.6.1.1 |
ubiIfEqStatsQueueIdThe queue identifier. Integer32 .1.3.6.1.4.1.7800.100.4.1.6.1.1.1 |
ubiIfEqStatsPassOctetsThe pass counter for bytes.ro Counter64 .1.3.6.1.4.1.7800.100.4.1.6.1.1.2 |
ubiIfEqStatsDropOctetsThe drop counter for bytes.ro Counter64 .1.3.6.1.4.1.7800.100.4.1.6.1.1.3 |
ubiIfEqStatsPassPktsThe pass counter for packets.ro Counter .1.3.6.1.4.1.7800.100.4.1.6.1.1.4 |
ubiIfEqStatsDropPktsThe drop counter for packets.ro Counter .1.3.6.1.4.1.7800.100.4.1.6.1.1.5 |
ubiIfEqStatsQueueDescrA textual string containing information
about the interface's each queue.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.6.1.1.6 |
ubiIfStatsTableThis table contains the statistics for physical port. SEQUENCE OF UbiIfStatsEntry .1.3.6.1.4.1.7800.100.4.1.6.2 |
ubiIfStatsEntryA Entry contains the statistics of a particular
physical port. UbiIfStatsEntry .1.3.6.1.4.1.7800.100.4.1.6.2.1 |
ubiIfStatsInPktsThe number of input packets for a given
physical port.ro Counter64 .1.3.6.1.4.1.7800.100.4.1.6.2.1.1 |
ubiIfStatsOutPktsThe number of output packets for a given
physical interface.ro Counter64 .1.3.6.1.4.1.7800.100.4.1.6.2.1.2 |
ubiIfStatsInCRCErrorsThe number of input CRC errors for a given
interface.ro Counter64 .1.3.6.1.4.1.7800.100.4.1.6.2.1.3 |
ubiIfStatsCounterClearInitialize the counterrw Enumeration .1.3.6.1.4.1.7800.100.4.1.6.2.1.14 |
ubiIfStatsSnmpClearInitialize the statistics in this table.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.6.2.1.15 |
ubiTrafficRateTabletraffic rate per interface SEQUENCE OF UbiTrafficRateEntry .1.3.6.1.4.1.7800.100.4.1.6.3 |
ubiTrafficRateEntrytraffic rate per interface UbiTrafficRateEntry .1.3.6.1.4.1.7800.100.4.1.6.3.1 |
ubiIfStatsInTrafficRatero Counter64 .1.3.6.1.4.1.7800.100.4.1.6.3.1.1 |
ubiIfStatsOutTrafficRatero Counter64 .1.3.6.1.4.1.7800.100.4.1.6.3.1.2 |
ubiPortControl OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.7 |
ubiFlowControlTableThe table of flowcontrol information on physical ports. SEQUENCE OF UbiFlowControlEntry .1.3.6.1.4.1.7800.100.4.1.7.1 |
ubiFlowControlEntryAn entry of flowcontrol information on physical port. UbiFlowControlEntry .1.3.6.1.4.1.7800.100.4.1.7.1.1 |
ubiFlowctrlReceiveflowcontrol on receive.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.7.1.1.1 |
ubiFlowctrlSendflowcontrol on sendrw Enumeration .1.3.6.1.4.1.7800.100.4.1.7.1.1.2 |
ubiFlowctrlWatermarkflowcontrol watermark valuerw UbiFlowctrlWatermark .1.3.6.1.4.1.7800.100.4.1.7.1.1.3 |
ubiRateLimit OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.7.2 |
ubiRateLimitTableThe table of rate-limit information on physical ports SEQUENCE OF UbiRateLimitEntry .1.3.6.1.4.1.7800.100.4.1.7.2.1 |
ubiRateLimitEntryAn entry of rate-limit information on physical port UbiRateLimitEntry .1.3.6.1.4.1.7800.100.4.1.7.2.1.1 |
ubiEgressTrafficRateegress traffic raterw Integer32 .1.3.6.1.4.1.7800.100.4.1.7.2.1.1.1 |
ubiEgressBucketSizeegress bucket sizerw Integer32 .1.3.6.1.4.1.7800.100.4.1.7.2.1.1.2 |
ubiIngressLevelingress level, range from 0.01 to 100.00rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.7.2.1.1.3 |
ubiRateLimitQueueEgressTableThe table of rate-limit q-egress information on physical ports SEQUENCE OF UbiRateLimitQueueEgressEntry .1.3.6.1.4.1.7800.100.4.1.7.2.2 |
ubiRateLimitQueueEgressEntryAn entry of rate-limit q-egress information on physical port UbiRateLimitQueueEgressEntry .1.3.6.1.4.1.7800.100.4.1.7.2.2.1 |
ubiQueueIdqueue id Integer32 .1.3.6.1.4.1.7800.100.4.1.7.2.2.1.1 |
ubiQueueEgressTrafficRateq-egress traffic raterw Integer32 .1.3.6.1.4.1.7800.100.4.1.7.2.2.1.2 |
ubiQueueEgressBucketSizeq-egress bucket sizerw Integer32 .1.3.6.1.4.1.7800.100.4.1.7.2.2.1.3 |
ubiStormControlTableThe table of storm-control information on physical ports SEQUENCE OF UbiStormControlEntry .1.3.6.1.4.1.7800.100.4.1.7.3 |
ubiStormControlEntryAn entry of storm-control information on physical port UbiStormControlEntry .1.3.6.1.4.1.7800.100.4.1.7.3.1 |
ubiBroadcastLevelbroadcast control level, range from 0.01 to 100.00rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.7.3.1.1 |
ubiMulticastLevelmulticast control level, range from 0.01 to 100.00rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.7.3.1.2 |
ubiUnicastLevelunicast control level, range from 0.01 to 100.00rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.4.1.7.3.1.3 |
ubiStormDiscardStats OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.7.4 |
ubiStormDiscardStatsClearInitialize the counters for discarded packet by Storm-Control.rw Enumeration .1.3.6.1.4.1.7800.100.4.1.7.4.1 |
ubiStormDiscardStatsTableThis table contains the statistics of discarded packets by Storm-control on physical ports SEQUENCE OF UbiStormDiscardStatsEntry .1.3.6.1.4.1.7800.100.4.1.7.4.2 |
ubiStormDiscardStatsEntryAn entry of storm-control discard statistics on physical port UbiStormDiscardStatsEntry .1.3.6.1.4.1.7800.100.4.1.7.4.2.1 |
ubiStormUnicastDiscardsThe number of discarded Unicast packets by Storm-control for a given interface.ro Counter64 .1.3.6.1.4.1.7800.100.4.1.7.4.2.1.1 |
ubiStormMulticastDiscardsThe number of discarded Multicast packets by Storm-control for a given interface.ro Counter64 .1.3.6.1.4.1.7800.100.4.1.7.4.2.1.2 |
ubiStormBroadcastDiscardsThe number of discarded Broadcast packets by Storm-control for a given interface.ro Counter64 .1.3.6.1.4.1.7800.100.4.1.7.4.2.1.3 |
ubiStormTotalDiscardsThe Total number of discarded packets by Storm-control for a given interface.ro Counter64 .1.3.6.1.4.1.7800.100.4.1.7.4.2.1.4 |
ubiIfErps OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.1.8 |
ubiIfErpsTableThe table of ERPS information on interface. SEQUENCE OF UbiIfErpsEntry .1.3.6.1.4.1.7800.100.4.1.8.1 |
ubiIfErpsEntryThe entry of ERPS information on interface. UbiIfErpsEntry .1.3.6.1.4.1.7800.100.4.1.8.1.1 |
ubiIfErpsAggMinLinkMinmum Link count to activate Port-channel in ERPS.
- To activate Port-channel, actived members of port-channel
must be minmum link count at least.rw Integer32 .1.3.6.1.4.1.7800.100.4.1.8.1.1.1 |
ubiInterfaceMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.2 |
ubiInterfaceMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.2.1 |
ubiInterfaceMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.4.2.2 |