UBIQUOSS-EPON-MIB
AI MIB Summary
The UBIQUOSS-EPON-MIB module enables monitoring and management of EPON line parameters, including optical power levels, signal status, and active subscriber session states, specifically for Ubiquoss optical line terminal (OLT) and optical network unit (ONU) hardware.
This MIB module defines epon line information
Main OID:
ubiEponMIB.1.3.6.1.4.1.7800.2.400
105
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
105 total| Object Name |
|---|
ubiEponMIBThis MIB module defines epon line information MODULE-IDENTITY .1.3.6.1.4.1.7800.2.400 |
ubiEponMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.400.1 |
ubiEponOltTableinformation of port SEQUENCE OF UbiEponOltEntry .1.3.6.1.4.1.7800.2.400.1.1 |
ubiEponOltEntryinformation of port UbiEponOltEntry .1.3.6.1.4.1.7800.2.400.1.1.1 |
ubiEponOltMacAddressOLT Hardware addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.1.1.1 |
ubiEponOltOperStatusOLT operational statusro Enumeration .1.3.6.1.4.1.7800.2.400.1.1.1.2 |
ubiEponOltAdminStatusOLT administrative statusrw Enumeration .1.3.6.1.4.1.7800.2.400.1.1.1.3 |
ubiEponOltHwVersionepon olt hardware versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.1.1.4 |
ubiEponOltFwVersionepon olt firmware versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.1.1.5 |
ubiEponOltSwVersionepon olt software versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.1.1.6 |
ubiEponOltAutoProfileNameconf profile namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.1.1.7 |
ubiEponOltRegisterModeOLT port registeraton Mode {auto(1), manual(2)}rw Enumeration .1.3.6.1.4.1.7800.2.400.1.1.1.8 |
ubiEponOltControlOLT controlrw Enumeration .1.3.6.1.4.1.7800.2.400.1.1.1.9 |
ubiEponOltConfTableinformation of port SEQUENCE OF UbiEponOltConfEntry .1.3.6.1.4.1.7800.2.400.1.2 |
ubiEponOltConfEntryinformation of port UbiEponOltConfEntry .1.3.6.1.4.1.7800.2.400.1.2.1 |
ubiEponOltEncryptionModeOLT port encryption policyrw Enumeration .1.3.6.1.4.1.7800.2.400.1.2.1.1 |
ubiEponOltP2pAccessControlOLT port p2p access Controlrw Enumeration .1.3.6.1.4.1.7800.2.400.1.2.1.2 |
ubiEponOltDbaInternalOLT port DBA internalrw Enumeration .1.3.6.1.4.1.7800.2.400.1.2.1.3 |
ubiEponOltDbaCycleOLT port DBA cyclerw INTEGER (0 | 200..16777215) .1.3.6.1.4.1.7800.2.400.1.2.1.4 |
ubiEponOltDbaDiscoveryFrequencyOLT port DBA Discovery Frequencyrw INTEGER (0 | 1..65535) .1.3.6.1.4.1.7800.2.400.1.2.1.5 |
ubiEponOltDbaDiscoveryLengthOLT port DBA Discovery Lengthrw INTEGER (0 | 1..65535) .1.3.6.1.4.1.7800.2.400.1.2.1.6 |
ubiEponOnuTableinformation of epon onu SEQUENCE OF UbiEponOnuEntry .1.3.6.1.4.1.7800.2.400.1.3 |
ubiEponOnuEntryinformation of epon onu UbiEponOnuEntry .1.3.6.1.4.1.7800.2.400.1.3.1 |
ubiEponOnuIndexONU IDro INTEGER .1.3.6.1.4.1.7800.2.400.1.3.1.1 |
ubiEponOnuMacAddressONU mac addressrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.3.1.2 |
ubiEponOnuLlidONU LLIDro INTEGER .1.3.6.1.4.1.7800.2.400.1.3.1.3 |
ubiEponOnuDescriptionepon onu descritponrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.3.1.4 |
ubiEponOnuTypeepon onu typero Enumeration .1.3.6.1.4.1.7800.2.400.1.3.1.5 |
ubiEponOnuRegModeONU registeration modero Enumeration .1.3.6.1.4.1.7800.2.400.1.3.1.6 |
ubiEponOnuOperStatusONU operational statusro Enumeration .1.3.6.1.4.1.7800.2.400.1.3.1.7 |
ubiEponOnuAdminStatusONU admin statusrw Enumeration .1.3.6.1.4.1.7800.2.400.1.3.1.8 |
ubiEponOnuBlockStatusONU block statusrw Enumeration .1.3.6.1.4.1.7800.2.400.1.3.1.9 |
ubiEponOnuProfileNameonu configuration profile namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.3.1.10 |
ubiEponOnuDistanceonu distancerw Integer32 .1.3.6.1.4.1.7800.2.400.1.3.1.11 |
ubiEponOnuDownloadImageonu download imagerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.3.1.12 |
ubiEponOnuControlepon onu controlrw Enumeration .1.3.6.1.4.1.7800.2.400.1.3.1.13 |
ubiEponOnuInfoTableinformation of epon cpe SEQUENCE OF UbiEponOnuInfoEntry .1.3.6.1.4.1.7800.2.400.1.4 |
ubiEponOnuInfoEntryinformation of epon cpe UbiEponOnuInfoEntry .1.3.6.1.4.1.7800.2.400.1.4.1 |
ubiEponOnuVendorIdepon vendor idro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.4.1.1 |
ubiEponOnuManuIDepon manufacturer IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.4.1.2 |
ubiEponOnuModelNameepon cpe model namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.4.1.3 |
ubiEponOnuSerialNumberepon cpe serial numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.4.1.4 |
ubiEponOnuHwVersionepon onu hardware versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.4.1.5 |
ubiEponOnuFwVersionepon onu firmware versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.4.1.6 |
ubiEponOnuSwVersionepon onu software versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.4.1.7 |
ubiEponOnuActiveTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7800.2.400.1.4.1.8 |
ubiEponOnuPortTableinformation of epon onu port SEQUENCE OF UbiEponOnuPortEntry .1.3.6.1.4.1.7800.2.400.1.5 |
ubiEponOnuPortEntryinformation of epon cpe UbiEponOnuPortEntry .1.3.6.1.4.1.7800.2.400.1.5.1 |
ubiEponOnuPortIndexindex of CPE ehternet portro INTEGER .1.3.6.1.4.1.7800.2.400.1.5.1.1 |
ubiEponOnuPortOperStateSpecifies port operational status of CPE portro Enumeration .1.3.6.1.4.1.7800.2.400.1.5.1.2 |
ubiEponOnuPortSpeedNegorw Enumeration .1.3.6.1.4.1.7800.2.400.1.5.1.3 |
ubiEponOnuPortSpeedConfigrw Enumeration .1.3.6.1.4.1.7800.2.400.1.5.1.4 |
ubiEponOnuPortDuplexConfigrw Enumeration .1.3.6.1.4.1.7800.2.400.1.5.1.5 |
ubiEponOnuPortSpeedCurrentSpecifies current speed of portro Enumeration .1.3.6.1.4.1.7800.2.400.1.5.1.6 |
ubiEponOnuPortDuplexCurrentSpecifies current duplex mode of portro Enumeration .1.3.6.1.4.1.7800.2.400.1.5.1.7 |
ubiEponOnuPortControlrw Enumeration .1.3.6.1.4.1.7800.2.400.1.5.1.8 |
ubiEponOnuConfProfileTableinformation of port SEQUENCE OF UbiEponOnuConfProfileEntry .1.3.6.1.4.1.7800.2.400.1.6 |
ubiEponOnuConfProfileEntryinformation of port UbiEponOnuConfProfileEntry .1.3.6.1.4.1.7800.2.400.1.6.1 |
ubiEponOnuConfProfileNameprofile name DisplayString .1.3.6.1.4.1.7800.2.400.1.6.1.1 |
ubiEponOnuDsPolicyModeONU downstream policy Controlrw Enumeration .1.3.6.1.4.1.7800.2.400.1.6.1.2 |
ubiEponOnuDsMaximumBandwidthDownload policy Downstream Max Bandwidthrw INTEGER (0 | 1..1000000) UNITS "Kbps" .1.3.6.1.4.1.7800.2.400.1.6.1.3 |
ubiEponOnuDsMaximumBurstSizeDownload policy Downstream Max Burst sizerw INTEGER (0 | 128..8388479) UNITS "byte" .1.3.6.1.4.1.7800.2.400.1.6.1.4 |
ubiEponOnuP2pPolicyModeONU port p2p access Controlrw Enumeration .1.3.6.1.4.1.7800.2.400.1.6.1.5 |
ubiEponOnuP2pMaximumBandwidthp2p Max Bandwidthrw INTEGER (0 | 1..1000000) UNITS "Kbps" .1.3.6.1.4.1.7800.2.400.1.6.1.6 |
ubiEponOnuP2pMaximumBurstSizep2p Max Burst sizerw INTEGER (0 | 128..8388479) UNITS "byte" .1.3.6.1.4.1.7800.2.400.1.6.1.7 |
ubiEponOnuInternalDbaMinimumBandwidthInternal Max Bandwidthrw INTEGER (0 | 43..65535) UNITS "Kbps" .1.3.6.1.4.1.7800.2.400.1.6.1.8 |
ubiEponOnuInternalDbaMaximumBandwidthInternal Min Bandwidthrw INTEGER (0 | 43..65535) UNITS "Kbps" .1.3.6.1.4.1.7800.2.400.1.6.1.9 |
ubiEponOnuPlatoDbaClassplato dba classrw INTEGER .1.3.6.1.4.1.7800.2.400.1.6.1.10 |
ubiEponOnuPlatoDbaguaranteedBandwidthplato guaranteed Bandwidthrw INTEGER .1.3.6.1.4.1.7800.2.400.1.6.1.11 |
ubiEponOnuPlatoDbaguaranteedBandwidthFineplato detail guaranteed Bandwidthrw INTEGER .1.3.6.1.4.1.7800.2.400.1.6.1.12 |
ubiEponOnuPlatoDbaBestEffortBandwidthplato best-effort Bandwidthrw INTEGER .1.3.6.1.4.1.7800.2.400.1.6.1.13 |
ubiEponOnuPlatoDbaBestEffortBandwidthFineplato detail best-effort Bandwidthrw INTEGER .1.3.6.1.4.1.7800.2.400.1.6.1.14 |
ubiEponOnuPlatoDbaDelayplato dba delayrw INTEGER .1.3.6.1.4.1.7800.2.400.1.6.1.15 |
ubiEponOnuEncryptionModeONU encryption policyrw Enumeration .1.3.6.1.4.1.7800.2.400.1.6.1.16 |
ubiEponOnuMaxLimitonu mac limitrw INTEGER .1.3.6.1.4.1.7800.2.400.1.6.1.17 |
ubiEponOnuConfRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'outOfService'),
it must be first unreferenced from all associated lines.
An 'active' profile may be modified at any time. Note
that some changes may require that any referenced lines be
restarted (e.g., eponLineConfLineType).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.2.400.1.6.1.18 |
ubiEponOnuUpQueueTableDescription. SEQUENCE OF UbiEponOnuUpQueueEntry .1.3.6.1.4.1.7800.2.400.1.7 |
ubiEponOnuUpQueueEntryDescription. UbiEponOnuUpQueueEntry .1.3.6.1.4.1.7800.2.400.1.7.1 |
ubiEponOnuUpQueueIndexProfile Queue indexro INTEGER .1.3.6.1.4.1.7800.2.400.1.7.1.1 |
ubiEponOnuUpQueueMaxBandwidthUpstream queue max bandwidthro INTEGER (0 | 100..1000000) UNITS "kbps" .1.3.6.1.4.1.7800.2.400.1.7.1.2 |
ubiEponOnuUpQueueMaxBurstSizeUpstream queue max burst sizero INTEGER (0 | 2..16777214) UNITS "byte" .1.3.6.1.4.1.7800.2.400.1.7.1.3 |
ubiEponOnuDownQueueTableDescription. SEQUENCE OF UbiEponOnuDownQueueEntry .1.3.6.1.4.1.7800.2.400.1.8 |
ubiEponOnuDownQueueEntryDescription. UbiEponOnuDownQueueEntry .1.3.6.1.4.1.7800.2.400.1.8.1 |
ubiEponOnuDownQueueIndexProfile Queue indexro INTEGER .1.3.6.1.4.1.7800.2.400.1.8.1.1 |
ubiEponOnuDownQueueMaxBandwidthDownstream queue max bandwidthro INTEGER (0 | 100..1000000) UNITS "kbps" .1.3.6.1.4.1.7800.2.400.1.8.1.2 |
ubiEponOnuDownQueueMaxBurstSizeDownstream queue max burst sizero INTEGER (0 | 2..16777214) UNITS "byte" .1.3.6.1.4.1.7800.2.400.1.8.1.3 |
ubiEponMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.400.2 |
ubiEponMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.400.2.0 |
ubiEponOltAlarmNotificationolt alarm notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.1 |
ubiEponOltOperStatusChangeNotificationolt oper notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.2 |
ubiEponOltAdminStatusChangeNotificationolt admin notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.3 |
ubiEponOnuAlarmNotificationonu upgrade notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.4 |
ubiEponOnuOperStatusChangeNotificationonu upgrade notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.5 |
ubiEponOnuAdminStatusChangeNotificationonu upgrade notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.6 |
ubiEponOamLinkDisconnectNotificationoam link disconnect notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.7 |
ubiEponOnuRegistrationErrorNotificationOnu registration error notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.8 |
ubiEponOnuRegistrationOverloadNotificationOnu registration too much notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.9 |
ubiEponSoftwareErrorNotificationOnu registration too much notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.10 |
ubiEponBadEncriptionKeyNotificationOnu registration too much notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.11 |
ubiEponOnuImageUpgradeNotificationonu upgrade notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.12 |
ubiEponOnuImageUpgradeFailNotificationonu upgrade notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.13 |
ubiEponOntDyingGaspNotificationonu upgrade notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.400.2.0.14 |
ubiEponMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.400.3 |
ubiEponMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.400.3.1 |
ubiEponMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.400.3.2 |
More MIBs from Ubiquoss
Browse all UbiquossMIBs →UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB
The UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for EPON (Ethernet Passive Optical Network) PON interfaces on Ubiquoss optical line terminal (OLT) hardware. It enables the definition, monitoring, and enforcement of traffic shaping, priority queuing, and bandwidth allocation policies across specific PON port groups.
342 objects→
UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB
The UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for Ubiquiti 10G-EPON Optical Line Terminals (OLTs). It enables the definition and monitoring of traffic shaping rules, bandwidth limits, and priority queues applied to specific PON profile groups within the access network.
339 objects→
UBIQUOSS-EPON-PM-GROUP-MIB
The UBIQUOSS-EPON-PM-GROUP-MIB module enables monitoring of performance metrics for Ubiquiti EPON (Ethernet Passive Optical Network) interfaces, specifically tracking traffic counters, error statistics, and link utilization data for optical line terminals and optical network units.
286 objects→
UBIQUOSS-EPON-PON-MAC-GROUP-MIB
The UBIQUOSS-EPON-PON-MAC-GROUP-MIB module provides management interfaces for monitoring and configuring MAC-layer parameters, including subscriber MAC addresses, VLAN mappings, and traffic statistics, within Ubiquiti's EPON (Ethernet Passive Optical Network) access network infrastructure.
259 objects→
UBIQUOSS-10GEPON-PM-GROUP-MIB
The UBIQUOSS-10GEPON-PM-GROUP-MIB module enables performance monitoring of Ubiquiti 10G-EPON optical line terminals and optical network units by exposing traffic counters, error statistics, and link utilization metrics. It facilitates the collection of physical layer and data link layer performance data, including bit error rates, packet drops, and interface throughput, for network capacity planning and fault isolation.
202 objects→
UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB
The UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB module enables monitoring and management of MAC layer statistics, session states, and interface counters for Ubiquiti 10G Ethernet Passive Optical Network (EPON) optical line terminals and optical network units. It provides specific visibility into 10G-EPON MAC protocol operations, including port status, traffic counters, and subscriber link metrics required for provisioning and fault isolation.
171 objects→