UB-MIB-SUPRV
Detailed view of the defined objects, syntax rules, and hierarchical paths.
243
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
243 total| Object Name |
|---|
ubNode OBJECT IDENTIFIER .1.3.6.1.4.1.75 |
RFC1065-SMI Unknown .1.3.6.1.4.1.75 |
moduleInsertedA card was inserted in the Access/One chassis. TRAP-TYPE .1.3.6.1.4.1.75.0.1 |
moduleRemovedA card was removed from the Access/One chassis. TRAP-TYPE .1.3.6.1.4.1.75.0.2 |
moduleFaultyA card has become faulty: its state changed to a1gOperStatus (moduleFault(6)). TRAP-TYPE .1.3.6.1.4.1.75.0.3 |
moduleDownA card has not responded to a supervisor poll: its state changed to a1gEthBusMgmtStatus(notResponding(4)). TRAP-TYPE .1.3.6.1.4.1.75.0.4 |
moduleResetA card has been reset: its state changed to a1gOperStatus (reset(13)). TRAP-TYPE .1.3.6.1.4.1.75.0.5 |
moduleDebugA card has put into debug mode: its state changed to a1gOperStatus (debugMode(4)). TRAP-TYPE .1.3.6.1.4.1.75.0.6 |
moduleHighTemperatureThe card's temperature has become too high: its state changed to a1gTempStatus(abnormal(2)). TRAP-TYPE .1.3.6.1.4.1.75.0.7 |
ethBusUnlockedThe interface to the Ethernet bus has been unlocked: its state changed to a1gEthBusAdmAction(unlock(2)). TRAP-TYPE .1.3.6.1.4.1.75.0.8 |
ethBusLockedThe interface to the Ethernet bus has been locked: its state changed to a1gEthBusAdmAction(lock(3)). TRAP-TYPE .1.3.6.1.4.1.75.0.9 |
moduleNetIfEnabledThe status of the interface to the backbone has changed so that all modules (with the possible exception of the supervisor - when it is in direct mode) access the backbone through the card's net interface: a state change to netBackboneStatus(active(2)) has occurred. TRAP-TYPE .1.3.6.1.4.1.75.0.16 |
moduleNetIfDisabledThe status of the interface to the backbone has changed so that there is no communication backbone through the card's net interface: a state change to netBackboneStatus(standby(6)) has occurred TRAP-TYPE .1.3.6.1.4.1.75.0.17 |
moduleNetIfLoopBackThe status of the interface to the backbone has changed so that this card's net interface loops back traffic directed to the backbone, while the other (possible) net interface's status becomes standby: a state change to netBackboneStatus(loopback(4)) has occurred. TRAP-TYPE .1.3.6.1.4.1.75.0.18 |
moduleNetIfInternalErrorAn internal error at the net interface has been detected: its state changed to netFault(internal(2)). TRAP-TYPE .1.3.6.1.4.1.75.0.19 |
moduleNetIfExternalErrorAn external error at the net interface has been detected: its state changed to either netFault(auiBad(3)) or netFault(mdiBad(4)). TRAP-TYPE .1.3.6.1.4.1.75.0.20 |
moduleParityErrorAn intelligent module has detected a parity error: its status has changed to a1imModuleFault (parityErr(3)). TRAP-TYPE .1.3.6.1.4.1.75.0.21 |
moduleFanBadThe fan on the module is defective: its status has changed to ecFanStatus(abnormal(3)). TRAP-TYPE .1.3.6.1.4.1.75.0.22 |
beaconDetectedThe ring containing this card has begun the beacon detect process: its status has changed to tr16cOperState(beaconDetectInProgress(4)). TRAP-TYPE .1.3.6.1.4.1.75.0.23 |
moduleTemperatureNormalThe card's temperature has returned to normal: its state changed from a1gTempStatus(abnormal(2)) to a1gTempStatus(normal(3)). TRAP-TYPE .1.3.6.1.4.1.75.0.24 |
portUnlockedOne or more of the concentrator's ports have been unlocked. TRAP-TYPE .1.3.6.1.4.1.75.0.32 |
portLockedOne or more of the concentrator's ports have been locked. TRAP-TYPE .1.3.6.1.4.1.75.0.33 |
portAutoSegmentedOne or more of the concentrator's ports have been auto-segmented by the hardware because of a fault. TRAP-TYPE .1.3.6.1.4.1.75.0.34 |
portFaultOne or more of the concentrator's ports have been segmented by the supervisor because of a fault. TRAP-TYPE .1.3.6.1.4.1.75.0.35 |
portForcedOne or more of the concentrator's ports have been forced to allow passive devices to enter the ring. TRAP-TYPE .1.3.6.1.4.1.75.0.36 |
portNotForcedOne or more of the concentrator's ports are no longer being forced to allow passive devices to enter the ring. TRAP-TYPE .1.3.6.1.4.1.75.0.37 |
portLobeFaultOne or more of the concentrator's ports are experiencing a lobe fault. The concentrator experiences voltage(either positive or negative) in only one of the phantom pair wires. TRAP-TYPE .1.3.6.1.4.1.75.0.38 |
portLobeFaultClearedOne or more of the concentrator's ports are no longer experiencing a lobe fault. TRAP-TYPE .1.3.6.1.4.1.75.0.39 |
portLinkTestUnlockedThe link test on one or more of the concentrator's ports has been unlocked. TRAP-TYPE .1.3.6.1.4.1.75.0.40 |
portLinkTestLockedThe link test on one or more of the concentrator's ports has been locked. TRAP-TYPE .1.3.6.1.4.1.75.0.41 |
badPowerSupplyAt least one power module has lost its AC power. : its state changed to hubPowerSupplyStatus(acPowerAbnormal(3)). TRAP-TYPE .1.3.6.1.4.1.75.0.48 |
powerSupplyHiTempThe temperature of the power supply has become too high: its state changed to hubPowerSupplyStatus(highTemp(4)). TRAP-TYPE .1.3.6.1.4.1.75.0.49 |
networkIfErrorOne or more of the interfaces to the network backbone are experiencing faults: its state changed to ensupDynamicNetStatus(netOrSupLoopback(6)). TRAP-TYPE .1.3.6.1.4.1.75.0.50 |
networkIfOKThe interface to the backbone network has changed (recovered) by using a redundant connection. The state of the interface to the backbone network changed to one of ensupDynamicNetStatus(netAndSupDirect(2) | supOnly(3) | netOnly(4) | bridgeOnly(5)). TRAP-TYPE .1.3.6.1.4.1.75.0.51 |
tempBadThe temperature in the enclosure has been reported by an enclosure temperature sensor to be out of range(possible enclosure fan failure) or the temperature of at least one card in the enclosure is out of range: the hub's state changed to hubTempStatus(abnormal(2)). TRAP-TYPE .1.3.6.1.4.1.75.0.52 |
tempOKThe temperature of all cards in the enclosure is now in the proper range or the enclosure temperature has returned to the proper range: the hub's state changed to: hubTempStatus(normal(3)) TRAP-TYPE .1.3.6.1.4.1.75.0.53 |
fTPSBadOne or both (for a fault tolerant power supply) dc power supplies have failed. The power supply's state has changed to: hubPowerSupplyStatus(onePsModuleFailed(5)). TRAP-TYPE .1.3.6.1.4.1.75.0.54 |
netUtilThresholdThe network utilization has been exceeded: ensupNetUtilization exceeded ensupNetUtilThreshold. TRAP-TYPE .1.3.6.1.4.1.75.0.55 |
enclosureFanBadThe enclosure has an airflow problem (probably a defective fan): the state of hubAFS has changed to abnormal(3). TRAP-TYPE .1.3.6.1.4.1.75.0.56 |
servicePortLoginThe interpreter on the netcard has detected a login command on the service port. TRAP-TYPE .1.3.6.1.4.1.75.0.64 |
servicePortLogoutThe interpreter on the netcard has detected a logout command on the service port. TRAP-TYPE .1.3.6.1.4.1.75.0.65 |
ubEquip OBJECT IDENTIFIER .1.3.6.1.4.1.75.1 |
ubSuprv OBJECT IDENTIFIER .1.3.6.1.4.1.75.1.1 |
hub OBJECT IDENTIFIER .1.3.6.1.4.1.75.1.1.1 |
hubIdHUB ENCLOSURE Group The address of the hub enclosure in MAC address format. This is the supervisor's MAC address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.75.1.1.1.1 |
hubTypeThe type of enclosure; the number of slots in the enclosure.ro Enumeration .1.3.6.1.4.1.75.1.1.1.2 |
hubNameThe name of the Access/One enclosure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.75.1.1.1.3 |
hubSerNumberThe serial number of the hub.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.75.1.1.1.4 |
hubIPAddrThe IP address used to communicate with the SNMP agent in the Supervisor.ro IpAddress .1.3.6.1.4.1.75.1.1.1.5 |
hubPowerSupplyStatusThe power supply status.ro Enumeration .1.3.6.1.4.1.75.1.1.1.6 |
hubTempStatusIndicates whether the temperature of at least one card in the enclosure is out of range.ro Enumeration .1.3.6.1.4.1.75.1.1.1.7 |
hubPollTimeThe time in tenths of seconds between polls of hub cards by the supervisor.ro Enumeration .1.3.6.1.4.1.75.1.1.1.8 |
hubResetActionWhen this internet-object is SET to a value of requested, resetAllCards, or forceLoad, the hub resets (according to the specific request), and after resetting locally sets the value of this internet-object to not-requested. Initially its value is not-requested.rw Enumeration .1.3.6.1.4.1.75.1.1.1.9 |
hubAFSIndicates whether airflow inside the enclosure is normal. This applies only to enclosures with an Air Flow Sensor (AFS) installed and a supervisor capable of detecting the signal from this sensor (currently only the ASM-710 and ASM-760).ro Enumeration .1.3.6.1.4.1.75.1.1.1.10 |
card OBJECT IDENTIFIER .1.3.6.1.4.1.75.1.1.2 |
ensupStaticNetConfigCARD Group ensup: Ethernet Supervisor The configured status of the interface between the net module(s) and the backbone.ro Enumeration .1.3.6.1.4.1.75.1.1.2.1 |
ensupDynamicNetStatusThe dynamically changed configuration status of the interface between the net module(s) and the backbone.ro Enumeration .1.3.6.1.4.1.75.1.1.2.2 |
ensupNetBridgeSlotThe relative group (slot) containing a local bridge by which the modules access the backbone (relevant only if the value of ensupStaticNetConfig is 'sup-bridge').ro Enumeration .1.3.6.1.4.1.75.1.1.2.3 |
ensupCarrierCounterThe number of times that carrier sense was on when sampled every 2 ms (used in conjunction with a1gUpTime).ro Counter .1.3.6.1.4.1.75.1.1.2.4 |
ensupNetUtilizationThe percentage of time that carrier sense was on; the percentage is expressed to the nearest tenth (as XXX.X%).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.75.1.1.2.5 |
ensupNetUtilThresholdThe threshold for ensupNetUtilization (sends a trap when exceeded).Percentage utilization to the nearest whole integer.ro INTEGER .1.3.6.1.4.1.75.1.1.2.6 |
a1gTablea1g: Access/1 Group TABLE Row selection: the card's relative position in the enclosure, starting at 1. SEQUENCE OF A1gEntry .1.3.6.1.4.1.75.1.1.2.7 |
a1gEntry A1gEntry .1.3.6.1.4.1.75.1.1.2.7.1 |
a1gSlotIdThe card's relative position in the enclosure, starting at 1.ro INTEGER .1.3.6.1.4.1.75.1.1.2.7.1.1 |
a1gPortsThe number of ports on a card.ro INTEGER .1.3.6.1.4.1.75.1.1.2.7.1.2 |
a1gOperStatusstates the module goes through when doing power-on diagnostics.ro Enumeration .1.3.6.1.4.1.75.1.1.2.7.1.3 |
a1gTempStatusAn indication whether the card's temperature is too high.ro Enumeration .1.3.6.1.4.1.75.1.1.2.7.1.4 |
a1gEthBusAdmActionThe administrative status of a module's Ethernet Bus interface (action). For an ASM320, if a1gEthBusMgmtStatus == lockedByJumper, then values of this attribute cannot be set.rw Enumeration .1.3.6.1.4.1.75.1.1.2.7.1.5 |
a1gEthBusMgmtStatusThe management status of a module's Ethernet bus interface.ro Enumeration .1.3.6.1.4.1.75.1.1.2.7.1.6 |
a1gNetMgmtBusOperStatusThe operational status of the network management interface from the supervisor to the module (the control bus).ro Enumeration .1.3.6.1.4.1.75.1.1.2.7.1.7 |
a1gProductTypeThe product type of an A/1 card.ro Enumeration .1.3.6.1.4.1.75.1.1.2.7.1.8 |
a1gUpTimeThe elapsed time since the module started operating.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.75.1.1.2.7.1.9 |
a1gResetsThe number of times a module has been reset.ro Counter .1.3.6.1.4.1.75.1.1.2.7.1.10 |
a1gResetActionWhen this internet-object is SET to one of the request values, the card resets, and after resetting retains the value that was SET. Initially its value is not-requested.rw Enumeration .1.3.6.1.4.1.75.1.1.2.7.1.11 |
configTableconfig: Access/1 Group Configuration TABLE Row selection: the card's relative position in the enclosure, starting at 1. SEQUENCE OF ConfigEntry .1.3.6.1.4.1.75.1.1.2.8 |
configEntry ConfigEntry .1.3.6.1.4.1.75.1.1.2.8.1 |
configSlotIdThe card's relative position in the enclosure, starting at 1.ro INTEGER .1.3.6.1.4.1.75.1.1.2.8.1.1 |
configFaultActionTypeThe action to be taken by the Supervisor following a fault on a card.ro Enumeration .1.3.6.1.4.1.75.1.1.2.8.1.2 |
configRetriesThe maximum number of times a reset is attempted when configFaultAction is set to reset (no further attempts are made once the reset is successful).ro INTEGER .1.3.6.1.4.1.75.1.1.2.8.1.3 |
configPowerUpModeThe actions taken by the module immediately after power up (pod is Power On Diagnostics).ro Enumeration .1.3.6.1.4.1.75.1.1.2.8.1.4 |
a1imTablea1im: Access/1 Intelligent Module TABLE Row selection: the value of the internet-object a1imSlotId, which contains the relative position of a card within an enclosure, starting at 1. SEQUENCE OF A1imEntry .1.3.6.1.4.1.75.1.1.2.9 |
a1imEntry A1imEntry .1.3.6.1.4.1.75.1.1.2.9.1 |
a1imSlotIdThe relative slot position of a card, starting at 1.ro INTEGER .1.3.6.1.4.1.75.1.1.2.9.1.1 |
a1imMACAddrThe module's MAC address (for a bridge, its first network interface). May be (e.g., for the TRC-410) a unique id chosen from the set of MAC addresses.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.75.1.1.2.9.1.2 |
a1imPodDiagnosticMsgA text message describing a power-on-diagnostic state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.75.1.1.2.9.1.3 |
a1imModuleFaultFaults detected by the module.ro Enumeration .1.3.6.1.4.1.75.1.1.2.9.1.4 |
a1imHaltReasonThe last specific halt reason detected by the card.ro Enumeration .1.3.6.1.4.1.75.1.1.2.9.1.5 |
a1imDebugRegistersA set of 14 80186 registers used for debugging purposes. These are CS, IP, FLAG, AX, BX, CX, DX, SP, BP, SI, DI, DS, ES, and SS.ro OCTET STRING .1.3.6.1.4.1.75.1.1.2.9.1.6 |
tplTabletpl: Transport Layer TABLE Row selection: the value of the internet-object tplSlotId, which contains the relative position of a card within an enclosure, starting at 1. SEQUENCE OF TplEntry .1.3.6.1.4.1.75.1.1.2.10 |
tplEntry TplEntry .1.3.6.1.4.1.75.1.1.2.10.1 |
tplSlotIdThe relative slot position of a card, starting at 1.ro INTEGER .1.3.6.1.4.1.75.1.1.2.10.1.1 |
tplIPAddressThe card's IP address (only applies to TCP/IP)ro IpAddress .1.3.6.1.4.1.75.1.1.2.10.1.2 |
tplNiuNameThe card's Niu name (only applies to ISO)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.75.1.1.2.10.1.3 |
tplProtocolTypeThe type of transport protocol used by the module.ro Enumeration .1.3.6.1.4.1.75.1.1.2.10.1.4 |
tplSuprvPollStatusIndicates whether the module has responded to supervisor polling over Ethernet.ro Enumeration .1.3.6.1.4.1.75.1.1.2.10.1.5 |
imenEthBusTableimen: Intelligent Module Ethernet Datalink TABLE (Ethernet Bus interface) Row selection: the value of the internet-object imenSlotId, which contains the relative position of a card within an enclosure, starting at 1. SEQUENCE OF ImenEthBusEntry .1.3.6.1.4.1.75.1.1.2.11 |
imenEthBusEntry ImenEthBusEntry .1.3.6.1.4.1.75.1.1.2.11.1 |
imenSlotIdThe relative position of the card in the enclosure, starting from 1.ro INTEGER .1.3.6.1.4.1.75.1.1.2.11.1.1 |
imenTransmitPktsThe total number of packets transmitted.ro Counter .1.3.6.1.4.1.75.1.1.2.11.1.2 |
imenReceivePktsThe total number of packets received.ro Counter .1.3.6.1.4.1.75.1.1.2.11.1.3 |
imenCRCErrorsThe number of packets received with CRC errors.ro Counter .1.3.6.1.4.1.75.1.1.2.11.1.4 |
imenCollisionsThe number of packets transmitted with collision detected.ro Counter .1.3.6.1.4.1.75.1.1.2.11.1.5 |
brdgTablebrdg: Bridge TABLE Row selection: the value of the internet-object brdgSlotId, which contains the relative position of a card within an enclosure, starting at 1, plus the relative interface, brdgIfId, starting at 1. SEQUENCE OF BrdgEntry .1.3.6.1.4.1.75.1.1.2.12 |
brdgEntry BrdgEntry .1.3.6.1.4.1.75.1.1.2.12.1 |
brdgSlotIdThe relative slot (from 1) containing this card.ro INTEGER .1.3.6.1.4.1.75.1.1.2.12.1.1 |
brdgIfIdThe relative interface (from 1) of this entry (see the appropriate hardware specification to determine which interface is 1, 2, etc.).ro INTEGER .1.3.6.1.4.1.75.1.1.2.12.1.2 |
brdgIfTypeThe type of bridge interface.ro Enumeration .1.3.6.1.4.1.75.1.1.2.12.1.3 |
brdgIfFaultBridge faults (note these are interface specific).ro Enumeration .1.3.6.1.4.1.75.1.1.2.12.1.4 |
brdgIfMACAddrThe MAC address of the bridge's specific interfacero PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.75.1.1.2.12.1.5 |
ecTableec: Ethernet Concentrator TABLE Row selection: the value of the internet-object ecSlotId, which contains the relative position of a card within an enclosure, starting at 1. SEQUENCE OF EcEntry .1.3.6.1.4.1.75.1.1.2.13 |
ecEntry EcEntry .1.3.6.1.4.1.75.1.1.2.13.1 |
ecSlotIdThe relative slot (from 1) containing this card.ro INTEGER .1.3.6.1.4.1.75.1.1.2.13.1.1 |
ecCarrierCounterThe number of times carrier was sensed when sampled every 2 ms.ro Counter .1.3.6.1.4.1.75.1.1.2.13.1.2 |
ecFanStatusThe status of the Temp/Flex mount adaptor fan (on the ASM-800 (fiber EC) only).ro Enumeration .1.3.6.1.4.1.75.1.1.2.13.1.3 |
netTablenet: NET Card TABLE Row selection: the value of the internet-object netSlotId, which contains the relative position of a card within an enclosure, starting at 1. SEQUENCE OF NetEntry .1.3.6.1.4.1.75.1.1.2.14 |
netEntry NetEntry .1.3.6.1.4.1.75.1.1.2.14.1 |
netSlotIdThe relative slot (from 1) containing this card.ro INTEGER .1.3.6.1.4.1.75.1.1.2.14.1.1 |
netBackboneTypeThe type of backbone to which the NET interface is attached.ro Enumeration .1.3.6.1.4.1.75.1.1.2.14.1.2 |
netFaultAn interface fault at various points between the module and the attached backbone.ro Enumeration .1.3.6.1.4.1.75.1.1.2.14.1.3 |
netBackboneStatusBackbone interface status: the status of the interface or interfaces to the backbone.ro Enumeration .1.3.6.1.4.1.75.1.1.2.14.1.4 |
brnTablebrn: Buffer Repeater NET Card TABLE Row selection: the value of the internet-object brnSlotId, which contains the relative position of a card within an enclosure, starting at 1, plus the relative interface, brnIfId (1 or 2). SEQUENCE OF BrnEntry .1.3.6.1.4.1.75.1.1.2.15 |
brnEntry BrnEntry .1.3.6.1.4.1.75.1.1.2.15.1 |
brnSlotIdThe relative slot (from 1) containing this card.ro INTEGER .1.3.6.1.4.1.75.1.1.2.15.1.1 |
brnIfIdThe relative interface (from 1) containing this card; interface 1 is the Ethernet Bus interface.ro Enumeration .1.3.6.1.4.1.75.1.1.2.15.1.2 |
brnIfEthDLCStatusThe Ethernet Data Link Control status of the last transmission to the segment attached to the buffered repeater net card.ro Enumeration .1.3.6.1.4.1.75.1.1.2.15.1.3 |
brnCarrierCounterThe number of times carrier was sensed when sampled every 1 ms.ro Counter .1.3.6.1.4.1.75.1.1.2.15.1.4 |
brnCarrierTimeIntervalThe time interval over which brnCarrierCounter counts.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.75.1.1.2.15.1.5 |
brnTransmitPktsThe total number of packets transmitted.ro Counter .1.3.6.1.4.1.75.1.1.2.15.1.6 |
brnReceivePktsThe total number of packets received.ro Counter .1.3.6.1.4.1.75.1.1.2.15.1.7 |
brnCRCErrorsThe number of packets received with CRC errors.ro Counter .1.3.6.1.4.1.75.1.1.2.15.1.8 |
brnCollisionsThe number of collisions detected.ro Counter .1.3.6.1.4.1.75.1.1.2.15.1.9 |
brnPktsAborted16CollsThe number of packets aborted because of 16 consecutive collisions detected.ro Counter .1.3.6.1.4.1.75.1.1.2.15.1.10 |
brnShortPktsThe total number of short packets received.ro Counter .1.3.6.1.4.1.75.1.1.2.15.1.11 |
brnAlignmentErrorsThe total number of packets received with alignment errors: the number of frames received that are not an integral number of octets and do not pass the FCS check.ro Counter .1.3.6.1.4.1.75.1.1.2.15.1.12 |
brnOverflowsThe number of packets received that had to be discarded due to errors in bit frequency resulting in overflow.ro Counter .1.3.6.1.4.1.75.1.1.2.15.1.13 |
brnUnderflowsThe number of packets received that had to be discarded due to errors in bit frequency resulting in underflow.ro Counter .1.3.6.1.4.1.75.1.1.2.15.1.14 |
tr16cTabletr16c: Token Ring Concentrator Card TABLE Row selection: the value of the internet-object tr16cSlotId, which contains the relative position of a card within an enclosure, starting at 1. SEQUENCE OF Tr16cEntry .1.3.6.1.4.1.75.1.1.2.16 |
tr16cEntry Tr16cEntry .1.3.6.1.4.1.75.1.1.2.16.1 |
tr16cSlotIdThe relative slot number, starting at 1, of the concentrator.ro INTEGER .1.3.6.1.4.1.75.1.1.2.16.1.1 |
tr16cTier17,32 RelayID Indicates the management level of functionality (tier) of this concentrator.ro Enumeration .1.3.6.1.4.1.75.1.1.2.16.1.2 |
tr16cOperStateThe operational state of the ring.ro Enumeration .1.3.6.1.4.1.75.1.1.2.16.1.3 |
tr16cRingNumberThe ring number assigned when configuring a bridge.ro INTEGER .1.3.6.1.4.1.75.1.1.2.16.1.4 |
tr16cManufacturerIDThe Organization Unique Identifier as defined in IEEE 802.1A, Overview and Architecture. This is the first 24 bits of UB's MAC address identifying UB uniquely worldwide and is a constant equal to 00DD00 in hexadecimal.ro OCTET STRING .1.3.6.1.4.1.75.1.1.2.16.1.5 |
tr16cManufacturerProductIDA string of ASCII characters representing the concentrator's product identifier (i.e., a name identifying an enumeration of a1gProductType). Some examples are 'trc-410-1' and 'trc-410-2'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.75.1.1.2.16.1.6 |
tr16cManufProductVersA string that is unique for a specific manufacturerProductID that identifies a concentrators's hardware and firmware versions. The two octets are non-negative integers with values from 0 through 255. If a version does not apply then the version number is zero. One is the first applicable version number. The first octet is the hardware version and the second is the firmware version.ro OCTET STRING .1.3.6.1.4.1.75.1.1.2.16.1.7 |
tr16cActiveMonitorPortNumberThe relative port number of the active monitor for this ring. Its value is 0 if the active monitor is not attached to any port on this concentrator.ro INTEGER .1.3.6.1.4.1.75.1.1.2.16.1.8 |
tr16cRingSpeed17 RingSpeed The current concentrator operating speed of either 4 or 16 Mbps. Note that each concentrator in a ring must be configured with the same value of this attribute.ro Enumeration .1.3.6.1.4.1.75.1.1.2.16.1.9 |
tr16cLLCFrames26 TotalLLCFramesThe total number of transmitted frames that are not MAC level management frames.ro Counter .1.3.6.1.4.1.75.1.1.2.16.1.10 |
tr16cMACFrames26 TotalMACFramesThe total number of transmitted frames that are MAC level management frames.ro Counter .1.3.6.1.4.1.75.1.1.2.16.1.11 |
tr16cOctets26 TotalOctetsThe total number of octets transmitted.ro Counter .1.3.6.1.4.1.75.1.1.2.16.1.12 |
tr16cMulticastFrames26 TotalMulticastFramesThe total number of frames with a destination address that is either a Functional Group Address or a Group Address.ro Counter .1.3.6.1.4.1.75.1.1.2.16.1.13 |
tr16cBroadcastFrames26 TotalBroadcastFramesThe total number of frames with a destination address that is a Broadcast Address.ro Counter .1.3.6.1.4.1.75.1.1.2.16.1.14 |
tr16cFrameCheckSequences26,27 TotalFrameCheckSequenceThe total number of packets with an FCS error.ro Counter .1.3.6.1.4.1.75.1.1.2.16.1.15 |
tr16cAutoPartitionEnableTimer25 AutoPartitionEnableTimer *a Indicates the period of time to wait until re-enabling a 'beacon detected' port. the default value is 0 secondsrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.75.1.1.2.16.1.16 |
tr16cAutoPartitionHoldTimer25 AutoPartitionHoldTimer *a Indicates the amount of time to wait until starting the beacon detect process. The default value is 0 seconds.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.75.1.1.2.16.1.17 |
tr16cAutoPartitionRetries25 AutoPartitionThreshold *a Indicates the number of times a port can be temporarily locked by the beacon detect process prior to being permanently locked. The default value is 3.rw INTEGER .1.3.6.1.4.1.75.1.1.2.16.1.18 |
tr16cLLCSamples26,27 BandwidthUtilizationA count of the number of times that an LLC packet was present when sampling every millisecond.ro Counter .1.3.6.1.4.1.75.1.1.2.16.1.19 |
tr16cMACSamples26,27 BandwidthUtilizationA count of the number of times that a MAC frame was present when sampling every millisecond.ro Counter .1.3.6.1.4.1.75.1.1.2.16.1.20 |
tr16cUpTimeMS26,27 BandwidthUtilization The elapsed time in milliseconds since the concentrator started operating.ro Counter .1.3.6.1.4.1.75.1.1.2.16.1.21 |
tr16cResetDurableUserAttrsA request to copy the default values stored in durable memory to the User Durable attributes also in durable memory. The User attributes affected are tr16cRingSpeed, tr16p1AllowInsert, tr16p1ForceInsert, tr16cAutoPartitionEnableTimer, tr16cAutoPartitionHoldTimer, and tr16cAutoPartitionRetries.rw Enumeration .1.3.6.1.4.1.75.1.1.2.16.1.22 |
tr16reTabletr16re: Token Ring Concentrator Ring Error TABLE Row selection: the value of the internet-object tr16cSlotId, which contains the relative position of a card within an enclosure, starting at 1. Contains ring error monitor non-isolating errors. SEQUENCE OF Tr16reEntry .1.3.6.1.4.1.75.1.1.2.17 |
tr16reEntry Tr16reEntry .1.3.6.1.4.1.75.1.1.2.17.1 |
tr16reSlotIdThe relative slot in the hub enclosure, starting at 1.ro INTEGER .1.3.6.1.4.1.75.1.1.2.17.1.1 |
tr16reLostFramesNon-isolating lost frames.ro Counter .1.3.6.1.4.1.75.1.1.2.17.1.2 |
tr16reRcvCongestionErrorsNon-isolating congestion on receive errors.ro Counter .1.3.6.1.4.1.75.1.1.2.17.1.3 |
tr16reFrequencyErrorsNon-isolating frequency errors.ro Counter .1.3.6.1.4.1.75.1.1.2.17.1.4 |
tr16reFrameCopyErrorsNon-isolating frame copy errors.ro Counter .1.3.6.1.4.1.75.1.1.2.17.1.5 |
tr16reTokenErrorsNon-isolating token errors.ro Counter .1.3.6.1.4.1.75.1.1.2.17.1.6 |
port OBJECT IDENTIFIER .1.3.6.1.4.1.75.1.1.3 |
ecpTablePORT Group ecp: Ethernet Port TABLE Row selection: the value of the internet-object ecpSlotId, which contains the relative position of a card within an enclosure, starting at 1, plus a relative port identifier, starting at 1. SEQUENCE OF EcpEntry .1.3.6.1.4.1.75.1.1.3.1 |
ecpEntry EcpEntry .1.3.6.1.4.1.75.1.1.3.1.1 |
ecpSlotIdThe relative slot (from 1) containing the card.ro INTEGER .1.3.6.1.4.1.75.1.1.3.1.1.1 |
ecpPortIdThe relative port (from 1) on the card.ro INTEGER .1.3.6.1.4.1.75.1.1.3.1.1.2 |
ecpMgmtStatusThe management status of an Ethernet port.ro Enumeration .1.3.6.1.4.1.75.1.1.3.1.1.3 |
ecpAdmActionThe administrative status of an Ethernet port.rw Enumeration .1.3.6.1.4.1.75.1.1.3.1.1.4 |
ecpCarrierCounterThe number of times carrier was sensed on the port when sampled every 2 ms.ro Counter .1.3.6.1.4.1.75.1.1.3.1.1.5 |
ecfpTableecfp: Ethernet Concentrator Fiber Port TABLE Row selection: the value of the internet-object ecfpSlotId, which contains the relative position of a card within an enclosure, starting at 1, plus the relative port identifier, ecfpPortId, starting at 1. SEQUENCE OF EcfpEntry .1.3.6.1.4.1.75.1.1.3.2 |
ecfpEntry EcfpEntry .1.3.6.1.4.1.75.1.1.3.2.1 |
ecfpSlotIdThe relative slot (from 1) containing the card.ro INTEGER .1.3.6.1.4.1.75.1.1.3.2.1.1 |
ecfpPortIdThe relative port (from 1) on the card.ro INTEGER .1.3.6.1.4.1.75.1.1.3.2.1.2 |
ecfpMACAddrThe latest source MAC address from packets received from the MAC side of the AUIro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.75.1.1.3.2.1.3 |
ecfpTxIdleTimeThe elapsed time since the last packet was transmitted.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.75.1.1.3.2.1.4 |
ec10btpTableec10btp: Ethernet Concentrator 10BaseT Port TABLE Row selection: the value of the internet-object ec10btpSlotId, which contains the relative position of a card within an enclosure, starting at 1, plus the relative port identifier, ec10btpPortId, starting at 1. SEQUENCE OF Ec10btpEntry .1.3.6.1.4.1.75.1.1.3.3 |
ec10btpEntry Ec10btpEntry .1.3.6.1.4.1.75.1.1.3.3.1 |
ec10btpSlotIdThe relative slot (from 1) containing the card.ro INTEGER .1.3.6.1.4.1.75.1.1.3.3.1.1 |
ec10btpPortIdThe relative port (from 1) on the card.ro INTEGER .1.3.6.1.4.1.75.1.1.3.3.1.2 |
ec10btpLinkTestStatusThe result of the link integrity test.ro Enumeration .1.3.6.1.4.1.75.1.1.3.3.1.3 |
ec10btpLinkTestActionA request to unlock the link integrity test (which is a continuous test).rw Enumeration .1.3.6.1.4.1.75.1.1.3.3.1.4 |
trcpTabletrcp: Token Ring Concentrator Port TABLE Row selection: the value of the internet-object trcpSlotId, which contains the relative position of a card within an enclosure, starting at 1, plus a relative port identifier starting at 1. SEQUENCE OF TrcpEntry .1.3.6.1.4.1.75.1.1.3.4 |
trcpEntry TrcpEntry .1.3.6.1.4.1.75.1.1.3.4.1 |
trcpSlotIdThe relative slot (from 1) containing the card.ro INTEGER .1.3.6.1.4.1.75.1.1.3.4.1.1 |
trcpPortIdThe relative port (from 1) on the card.ro Enumeration .1.3.6.1.4.1.75.1.1.3.4.1.2 |
trcpAdmActionThe administrative status of a token ring port. It reflects only administrative status.rw Enumeration .1.3.6.1.4.1.75.1.1.3.4.1.3 |
trcpOperStatusThe operational status of a token ring port.ro Enumeration .1.3.6.1.4.1.75.1.1.3.4.1.4 |
tr16p1Tabletr16p1: Token Ring Concentrator Port Tier 1 TABLE Row selection: the value of the internet-object tr16p1SlotId, which contains the relative position of a card within an enclosure, starting at 1 plus the value of tr16p1PortId, which contains the relative position of a port within a card, starting at 1. SEQUENCE OF Tr16p1Entry .1.3.6.1.4.1.75.1.1.3.5 |
tr16p1Entry Tr16p1Entry .1.3.6.1.4.1.75.1.1.3.5.1 |
tr16p1SlotIdThe relative position (starting at 1) of the concentrator's slot within the enclosure.ro INTEGER .1.3.6.1.4.1.75.1.1.3.5.1.1 |
tr16p1PortIdThe relative port on the card starting at 1. Ports 1-12 are ring station ports, 13 is the expansion in port, and 14 is the expansion out port.ro Enumeration .1.3.6.1.4.1.75.1.1.3.5.1.2 |
tr16p1InsertionStateThe end result of tr16p1AllowInsert, tr16p1ForceInsert, and tr16p1PhantomState, i.e., inserted means tr16p1ForceInsert | tr16p1AllowInsert & tr16p1PhantomState, where tr16p1ForceInsert is true if requested, tr16p1AllowInsert is true if requested, and tr16p1PhantomState is true if phantomPresent.ro Enumeration .1.3.6.1.4.1.75.1.1.3.5.1.3 |
tr16p1AllowInsert19 RingStationPortAction *aAn action that allows an RS port to insert onto its ring if both phantom voltages are present (tr16p1PhantomState is phantomPresent).20 ExpansionInPortAction *aWhen not allowed, this bypass forces a 'loop-back' to occur on the XI port, and does not allow concentrators to insert onto their rings.21 ExpansionOutPortAction *aWhen not allowed this bypass forces a 'loop-back' to occur on the XO port so that an attached ASM400 or ASM410 is not inserted when phantom voltage is detected.rw Enumeration .1.3.6.1.4.1.75.1.1.3.5.1.4 |
tr16p1ForceInsert19 RingStationPortInsert *aWhen forcedInsertion, forces an RS port to insert onto its ring regardless of whether phantom voltage or other conditions are detected. This is used to support passive devices, such as the IBM MSAU, in order to support the Satellite expansion capability.19 ExpansionInPortInsert *aWhen set, inserts the XI port onto the ring regardless of whether phantom voltage is present.21 ExpansionOutPortInsert *aForces XI port to insert on the network.rw Enumeration .1.3.6.1.4.1.75.1.1.3.5.1.5 |
tr16p1PhantomState19 ExpansionInPhantomDetect Indicates the XI port detects phantom voltage being provided.20 ExpansionOutPhantomLoadDetect The status of the phantom voltage provided by the XO port (XO->XI or XO->RS (satellite)).ro Enumeration .1.3.6.1.4.1.75.1.1.3.5.1.6 |
tr16p2Tabletr16p2: Token Ring Concentrator Port Tiers 2,3 TABLE Row selection: the value of the internet-object tr16p2SlotId, which contains the relative position of a card within an enclosure, starting at 1 plus the value of tr16p2PortId, which contains the relative position of a port within a card, starting at 1. SEQUENCE OF Tr16p2Entry .1.3.6.1.4.1.75.1.1.3.6 |
tr16p2Entry Tr16p2Entry .1.3.6.1.4.1.75.1.1.3.6.1 |
tr16p2SlotIdThe relative position (starting at 1) of the concentrator's slot within the enclosure.ro INTEGER .1.3.6.1.4.1.75.1.1.3.6.1.1 |
tr16p2PortIdThe relative port on the card starting at 1. Ports 1-12 are ring station ports, 13 is the expansion in port, and 14 is the expansion out port.ro Enumeration .1.3.6.1.4.1.75.1.1.3.6.1.2 |
tr16p2OperState25 RingStationAutoPartitionState25 RingExpansionInPartitionState25 ExpansionOutAutoPartitionState Indicates whether a hard failure has occurred on a port, been detected through the beaconing procedure, and the offending port subsequently bypassed in the ring.ro Enumeration .1.3.6.1.4.1.75.1.1.3.6.1.3 |
tr16p2BeaconDetects25 RingStationAutoPartitionCount25 ExpansionInAutoPartitionCount25 ExpansionOutAutoPartitionCount Indicates the number of beacon detects that have resulted in this port being partitioned (removed from its ring).ro Counter .1.3.6.1.4.1.75.1.1.3.6.1.4 |
tr16p2LastSourceAddress23,27 RingStationLastSourceAddress23,27 ExpansionInLastSourceAddress23,27 ExpansionOutLastSourceAddress Address of previously attached node.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.75.1.1.3.6.1.5 |
tr16p2LLCFramesTransmitted27 RingStationLLCFramesTransmitted 27 ExpansionInLLCFramesTransmitted 27 ExpansionOutLLCFramesTransmitted Total number of non-MAC Management packets transmitted.ro Counter .1.3.6.1.4.1.75.1.1.3.6.1.6 |
tr16p2LLCFramesReceived27 RingStationLLCFramesReceived 27 ExpansionInLLCFramesReceived 27 ExpansionOutLLCFramesReceived Total number of non-MAC Management packets received.ro Counter .1.3.6.1.4.1.75.1.1.3.6.1.7 |
tr16p2MACFramesTransmitted27 RingStationMACFramesTransmitted27 ExpansionInMACFramesTransmitted27 ExpansionOutMACFramesTransmitted Total number of MAC Management packets transmitted.ro Counter .1.3.6.1.4.1.75.1.1.3.6.1.8 |
tr16p2MACFramesReceived27 RingStationMACFramesReceived27 ExpansionInMACFramesReceived27 ExpansionOutMACFramesReceived Total number of MAC Management packets received.ro Counter .1.3.6.1.4.1.75.1.1.3.6.1.9 |
tr16p2OctetsTransmitted27 RingStationOctetsTransmitted27 ExpansionInOctetsTransmitted27 ExpansionOutOctetsTransmitted Total number of LLC Information octets transmitted.ro Counter .1.3.6.1.4.1.75.1.1.3.6.1.10 |
tr16p2OctetsReceived27 RingStationOctetsReceived27 ExpansionInOctetsReceived27 ExpansionOutOctetsReceived Total number of LLC Information Field octets received.ro Counter .1.3.6.1.4.1.75.1.1.3.6.1.11 |
tr16p2MulticastsTransmitted28 RingStationMulticastTransmitted 28 ExpansionInMulticastTransmitted 28 ExpansionOutMulticastTransmitted Total number of Multicast packets transmitted.ro Counter .1.3.6.1.4.1.75.1.1.3.6.1.12 |
tr16p2BroadcastsTransmitted28 RingStationBroadcastTransmitted28 ExpansionOutBroadcastTransmitted28 ExpansionInBroadcastTransmitted Total number of Broadcast packets transmitted.ro Counter .1.3.6.1.4.1.75.1.1.3.6.1.13 |
tr16p2FCSErrorsTransmitted28 RingStationFCSErrorsTransmitted28 ExpansionInFCSErrorsTransmitted28 ExpansionOutFCSErrorsTransmitted Total number of packets transmitted with an FCS error.ro Counter .1.3.6.1.4.1.75.1.1.3.6.1.14 |
tr16p2FCSErrorsReceived28 RingStationFCSErrorsReceived28 ExpansionInFCSErrorsReceived28 ExpansionOutFCSErrorsReceived Total number of packets received with an FCS error.ro Counter .1.3.6.1.4.1.75.1.1.3.6.1.15 |
tr16p2LastSourceAddressUptimeTime since the value of tr16p2LastSourceAddress last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.75.1.1.3.6.1.16 |
tr16p3Tabletr16p3: Token Ring Concentrator Port Tiers 2,3 TABLE Row selection: the value of the internet-object tr16p3SlotId, which contains the relative position of a card within an enclosure, starting at 1 plus the value of tr16p3PortId, which contains the relative position of a port within a card, starting at 1. SEQUENCE OF Tr16p3Entry .1.3.6.1.4.1.75.1.1.3.7 |
tr16p3Entry Tr16p3Entry .1.3.6.1.4.1.75.1.1.3.7.1 |
tr16p3SlotIdThe relative position (starting at 1) of the concentrator's slot within the enclosure.ro INTEGER .1.3.6.1.4.1.75.1.1.3.7.1.1 |
tr16p3PortIdThe relative port on the card starting at 1. Ports 1-12 are ring station ports, 13 is the expansion in port, and 14 is the expansion out port.ro Enumeration .1.3.6.1.4.1.75.1.1.3.7.1.2 |
tr16p3LineErrorsIsolating line errors.ro Counter .1.3.6.1.4.1.75.1.1.3.7.1.3 |
tr16p3InternalErrorsIsolating internal errors.ro Counter .1.3.6.1.4.1.75.1.1.3.7.1.4 |
tr16p3Burst5ErrorsIsolating burst 5 errors.ro Counter .1.3.6.1.4.1.75.1.1.3.7.1.5 |
tr16p3AcErrorsIsolating AC errors.ro Counter .1.3.6.1.4.1.75.1.1.3.7.1.6 |
tr16p3AbortDelimitersIsolating abort delimiters.ro Counter .1.3.6.1.4.1.75.1.1.3.7.1.7 |
ubTrapAttrs OBJECT IDENTIFIER .1.3.6.1.4.1.75.3 |
trapInstanceIdTRAP Group: The attributes that may appear in the variable-bindings list of the Trap-PDU. An instance identifier that uniquely identifies an occurrence of a trap. Note that if multiple Trap-PDUs are sent to reflect the occurrence of the same trap, each contains the same value of the trapInstanceId. INTEGER .1.3.6.1.4.1.75.3.1 |
trapSlotIdtrapSource (consists of the following):The attributes required to define the source of the trap. For example, when a port is unlocked, the slot identifier and port identifier define the source of the trap. The product type is also included in case the enterprise field in the trap-PDU does not completely distinguish the characteristics of the source. The relative slot (from 1) containing the card that the trap is about. INTEGER .1.3.6.1.4.1.75.3.2 |
trapProductTypeThe product type of the Access/One card that the trap is about.See a1gProductType for specific values. INTEGER .1.3.6.1.4.1.75.3.3 |
trapPortIDThe relative port (from 1) that the trap is about. INTEGER .1.3.6.1.4.1.75.3.4 |
trapPortCountThe number of ports on a concentrator. INTEGER .1.3.6.1.4.1.75.3.15 |
trapPortMaskA mask indicating the status of ports on the concentrator. OCTET STRING .1.3.6.1.4.1.75.3.16 |
ubSystem OBJECT IDENTIFIER .1.3.6.1.4.1.75.4 |
ubSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.75.4.1 |
trpsbTableTRAP SUBSCRIPTION Group Trap Subscription TABLE Row selection: the value of the internet-object trpsbIpAddress identifies a row corresponding to a valid member of an agent's community. This table contains 5 entries. SEQUENCE OF TrpsbEntry .1.3.6.1.4.1.75.4.1.2 |
trpsbEntry TrpsbEntry .1.3.6.1.4.1.75.4.1.2.1 |
trpsbIpAddressThe IP address of a manager subscribing to traps.rw IpAddress .1.3.6.1.4.1.75.4.1.2.1.1 |
trpsbCommunityThe community string identifying a manager subscribing to traps.rw OCTET STRING .1.3.6.1.4.1.75.4.1.2.1.2 |
trpsbActionsActions on a manager's trap subscription.rw Enumeration .1.3.6.1.4.1.75.4.1.2.1.3 |