UB-MIB-ECM
Detailed view of the defined objects, syntax rules, and hierarchical paths.
121
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
121 total| Object Name |
|---|
ubNode OBJECT IDENTIFIER .1.3.6.1.4.1.75 |
groupMapChangeThis trap is sent when a change occurs in the configuration of a hub cluster. The trapSlotId references either the slot from which a card has been removed or the one to which a card has been added.
::= 70
hubReset TRAP-TYPE
ENTERPRISE ubNode
VARIABLES { trapInstanceId, trapSlotId, hmBasHubHealthState, hmBasHubHealthText, hmBasHubHealthData }
DESCRIPTION TRAP-TYPE .1.3.6.1.4.1.75.0.74 |
ubTrapAttrs OBJECT IDENTIFIER .1.3.6.1.4.1.75.3 |
trapInstanceIdTRAP Group: The attributes that may appear in the variable-bindings list of the Trap-PDU. An instance identifier that uniquely identifies an occurrence of a trap. Note that if multiple Trap-PDUs are sent to reflect the occurrence of the same trap, each contains the same value of the trapInstanceId. INTEGER .1.3.6.1.4.1.75.3.1 |
trapSlotIdtrapSource (consists of the following):The attributes required to define the source of the trap. For example, when a port is unlocked, the slot identifier and port identifier define the source of the trap. The product type is also included in case the enterprise field in the trap-PDU does not completely distinguish the characteristics of the source. The relative slot (from 1) containing the card that the trap is about. INTEGER .1.3.6.1.4.1.75.3.2 |
trapProductTypeThe product type of the Access/One card that the trap is about.See a1gProductType for specific values. INTEGER .1.3.6.1.4.1.75.3.3 |
trapPortIDThe relative port (from 1) that the trap is about. INTEGER .1.3.6.1.4.1.75.3.4 |
ubExperimental OBJECT IDENTIFIER .1.3.6.1.4.1.75.6 |
asm320Prelim OBJECT IDENTIFIER .1.3.6.1.4.1.75.6.3 |
hmBasicCapability OBJECT IDENTIFIER .1.3.6.1.4.1.75.6.3.1 |
hmBasicHub OBJECT IDENTIFIER .1.3.6.1.4.1.75.6.3.1.1 |
hmBasicHubTableRow selection: the value of hmBasHubID. The Hub group contains each card in a hub cluster, which is all the cards in an Access/One enclosure that constitute a single repeater. Examples are multiple ASM320's attached to the Ethernet backplane bus to act as a single repeater (an Ethernet bus Hub Cluster, as well as single ASM320's not attached to the this bus. Any model of Ethernet concentrator (ASM320, ASM310, ASM300, TEC900, and FEC800) may belong to a hub cluster. When a card is added to an Ethernet bus hub cluster it retains its Group (card) management data, but resets its Hub management data. SEQUENCE OF HmBasicHubEntry .1.3.6.1.4.1.75.6.3.1.1.1 |
hmBasicHubEntry HmBasicHubEntry .1.3.6.1.4.1.75.6.3.1.1.1.1 |
hmBasHubIDAn identifier unique within the hub enclosure of the hub cluster, the set of cards in an Access/One enclosure that constitute a single repeater. The hmBasHubID of the set of cards that by attachment to the Ethernet bus on the backplane form a single repeater (the Ethernet Bus Cluster) is assigned the current slot identifier of the supervisor (the value of the supervisor's hmBasGroupID). Any other Access/One Ethernet concentrator in the hub enclosure has a hmBasHubID that is assigned the value of its hmBasGroupID. The value of hmBasHubID as well as rows in the hmBasicHubTable are assigned dynamically by the Access/One supervisor as hub clusters are formed, reformed, and deleted.ro INTEGER .1.3.6.1.4.1.75.6.3.1.1.1.1.1 |
hmBasHubGroupCapacityThe number of cards that can potentially be contained within a repeater.ro INTEGER .1.3.6.1.4.1.75.6.3.1.1.1.1.2 |
hmBasHubHealthStateIndicates whether there is a known operational failure or problem in the hub. The hmBasHubHealthText and hmBasHubHealthData attributes may be consulted for more specific information.ro Enumeration .1.3.6.1.4.1.75.6.3.1.1.1.1.3 |
hmBasHubHealthTextDisplayable information concerning the operational health of the hub and its components. Note that hmBasHubHealthState indicates whether the condition applies to a hub, supervisor, group, or port. This attribute contains a string that is equivalent to or provides further explanation of the value of hmBasHubHealthState as indicated in the following table:hmBasHubHealthState: string1: 'Other'2: contains either 'Normal Operation', or the string that is the value of the object a1imPodDiagnosticMsg.3: 'Hub Failure'4: 'Group Failure'5: 'Port Failure'6: contains either 'Control Bus Error' , or 'Temperature Problem'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.75.6.3.1.1.1.1.4 |
hmBasHubHealthDataNumeric information concerning the operational health of the hub and its components. Note that hmBasHubHealthState indicates whether the condition applies to a hub, supervisor, group, or port. This attribute contains some numeric value that is equivalent to or provides further explanation of the value of hmBasHubHealthState as indicated in the following table:hmBasHubHealthState: value (string)1: 1 ('Other')2: contains either 1 ('Normal Operation'), or 2 (the string that is the value of the object a1imPodDiagnosticMsg)3: 1 ('Hub Failure')4: 1 ('Group Failure')5: 1 ('Port Failure')6: contains either 1 ('Control Bus Error'), or 2 ('Temperature Problem')ro OCTET STRING .1.3.6.1.4.1.75.6.3.1.1.1.1.5 |
hmBasHubGroupMapA bit string that indicates which enclosure slots are currently occupied by groups from this hub. The first bit (starting from the left) corresponds to the first relative slot. A '1' indicates a slot is occupied by a group that is part of this hub.ro OCTET STRING .1.3.6.1.4.1.75.6.3.1.1.1.1.6 |
hmBasHubResetSetting this object's value to resetting causes a hub to be reset without affecting the management state of the hub. It also updates hmBasHubOnlyResetTimeStamp. This action also effectively performs an hmBasHubExecuteSelfTest2Action. This also has the effect of performing the ubHmResetGroup action on each card in this hub cluster.rw Enumeration .1.3.6.1.4.1.75.6.3.1.1.1.1.7 |
hmBasHubOnlyResetTimeStampRecords the value of sysUpTime anytime the hub is reset without management data being reset. The resolution of the time stamp is only required to be 100 milliseconds (which is 10 TimeTicks).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.75.6.3.1.1.1.1.8 |
hmBasHubExecuteSelfTest1ActionSetting this value to selfTesting requests that the hub perform a non-disruptive self-test.rw Enumeration .1.3.6.1.4.1.75.6.3.1.1.1.1.9 |
hmBasHubExecuteSelfTest2ActionThe hub performs a disruptive self-test. This test does not affect management data and does not inject packets onto any segment, but packets received during this test may or may not be relayed. This test at least invokes the functionality of the ubHmExecuteGroupSelfTest2 for each group in this hub cluster.rw Enumeration .1.3.6.1.4.1.75.6.3.1.1.1.1.10 |
hmBasHubResourceTypeA constant: 'ResourceTypeID'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.75.6.3.1.1.1.1.11 |
hmBasHubManufacturerIDThe Organization Unique Identifier as defined in IEEE 802.1A, Overview and Architecture. This is the first 24 bits of UB's MAC address identifying UB uniquely worldwide and is a constant equal to 00DD00 in hexadecimal.ro OCTET STRING .1.3.6.1.4.1.75.6.3.1.1.1.1.12 |
hmBasHubManufacturerProductIDFor the cluster of concentrators attached to the Ethernet bus to form a single repeater, this is a string of ASCII characters representing the resident supervisor's product identifier (i.e., a name identifying an enumeration of a1gProductType). Some examples are 'suprv-710' and 'suprv-790'. For single group hubs not capable of forming a single repeater with at least one other concentrator, this is the same as hmBasGroupManufProductID.ro OCTET STRING .1.3.6.1.4.1.75.6.3.1.1.1.1.13 |
hmBasHubManufProductVersionFor the cluster of concentrators attached to the Ethernet bus to form a single repeater, this is a string that is unique for a specific hmBasHubManufacturerProductID that identifies a supervisor's hardware, firmware, and software versions. Each of the first four octets are non-negative integers with values from 0 through 255. If a version does not apply then the version number is zero. One is the first applicable version number. The first octet is the hardware version, the second is the firmware version, and the third and fourth represent the software version. The fifth and sixth octets are available for any use. For single group hubs not capable of forming a single repeater with at least one other concentrator, this is the same as hmBasGroupManufProductVersion.ro OCTET STRING .1.3.6.1.4.1.75.6.3.1.1.1.1.14 |
hmBasicGroup OBJECT IDENTIFIER .1.3.6.1.4.1.75.6.3.1.2 |
hmBasicGroupTable SEQUENCE OF HmBasicGroupEntry .1.3.6.1.4.1.75.6.3.1.2.1 |
hmBasicGroupEntry HmBasicGroupEntry .1.3.6.1.4.1.75.6.3.1.2.1.1 |
hmBasGroupIDThe number of the slot containing the card.ro INTEGER .1.3.6.1.4.1.75.6.3.1.2.1.1.1 |
hmBasGroupManufacturerIDThe Organization Unique Identifier as defined in IEEE 802.1A, Overview and Architecture. This is the first 24 bits of UB's MAC address identifying UB uniquely worldwide and is a constant equal to 00DD00 in hexadecimal.ro OCTET STRING .1.3.6.1.4.1.75.6.3.1.2.1.1.2 |
hmBasGroupManufProductIDA string of ASCII characters representing the concentrator's product identifier (i.e., a name identifying an enumeration of a1gProductType). Some examples are 'ecm320-1' and 'ecm-310'.ro OCTET STRING .1.3.6.1.4.1.75.6.3.1.2.1.1.3 |
hmBasGroupManufProductVersionA string that is unique for a specific hmBasHubManufacturerProductID that identifies a concentrators's hardware, firmware, and software versions. Each of the first four octets are non-negative integers with values from 0 through 255. If a version does not apply then the version number is zero. One is the first applicable version number. The first octet is the hardware version, the second is the firmware version, and the third and fourth represent the software version. The fifth and sixth octets are available for any use.ro OCTET STRING .1.3.6.1.4.1.75.6.3.1.2.1.1.4 |
hmBasGroupNumOfPortsThe number of ports in this group (includes the AUI port but not the Ethernet backplane bus 'port'.ro INTEGER .1.3.6.1.4.1.75.6.3.1.2.1.1.5 |
hmBasicPort OBJECT IDENTIFIER .1.3.6.1.4.1.75.6.3.1.3 |
hmBasicPortTable SEQUENCE OF HmBasicPortEntry .1.3.6.1.4.1.75.6.3.1.3.1 |
hmBasicPortEntry HmBasicPortEntry .1.3.6.1.4.1.75.6.3.1.3.1.1 |
hmBasPortGroupIDThe relative slot number in an enclosure, starting with 1. This value is not greater than hmBasHubGroupCapacity.ro INTEGER .1.3.6.1.4.1.75.6.3.1.3.1.1.1 |
hmBasPortIDThe relative position of a port within a card starting with 1. The AUI port identifier is 13.ro INTEGER .1.3.6.1.4.1.75.6.3.1.3.1.1.2 |
hmBasPortTypero Enumeration .1.3.6.1.4.1.75.6.3.1.3.1.1.3 |
hmBasPortAdminStateThe administrative state of a port; when the unlocked action is requested, a BEGIN is exerted upon the auto-partion state machine (even if hmBasPortAdminState already has the value 'unlocked'.rw Enumeration .1.3.6.1.4.1.75.6.3.1.3.1.1.4 |
hmBasPortAutoPartitionStateIndicates whether a port has been automatically partitioned by the hub's auto-partition protection; this happens if a port signals continuous collision or there are greater than 30 consectutive collisions on the port.ro Enumeration .1.3.6.1.4.1.75.6.3.1.3.1.1.5 |
hmMonitorCapability OBJECT IDENTIFIER .1.3.6.1.4.1.75.6.3.2 |
hmMonitorHub OBJECT IDENTIFIER .1.3.6.1.4.1.75.6.3.2.1 |
hmMonitorHubTable SEQUENCE OF HmMonitorHubEntry .1.3.6.1.4.1.75.6.3.2.1.1 |
hmMonitorHubEntry HmMonitorHubEntry .1.3.6.1.4.1.75.6.3.2.1.1.1 |
hmMonHubIDThe same as hmBasHubID.ro INTEGER .1.3.6.1.4.1.75.6.3.2.1.1.1.1 |
hmMonHubTransmitCollisionsSee the IEEE 802.3 Hub Management Draft Supplement for a defintion. Note that when a concentrator is removed from a hub cluster this value may decrease and if a concentrator is added to a hub cluster it may increase by more than one unit. Therefore, it is implemented like a counter, except that it may wrap in either direction and it does not always count in single units.ro Counter .1.3.6.1.4.1.75.6.3.2.1.1.1.2 |
hmMonitorPort OBJECT IDENTIFIER .1.3.6.1.4.1.75.6.3.2.2 |
hmMonitorPortTable SEQUENCE OF HmMonitorPortEntry .1.3.6.1.4.1.75.6.3.2.2.1 |
hmMonitorPortEntry HmMonitorPortEntry .1.3.6.1.4.1.75.6.3.2.2.1.1 |
hmMonPortGroupIDThe relative slot number in an enclosure, starting with 1. This value is not greater than hmBasHubGroupCapacity.ro INTEGER .1.3.6.1.4.1.75.6.3.2.2.1.1.1 |
hmMonPortIDThe relative position of a port within a card starting with 1. The AUI port identifier is 13.ro INTEGER .1.3.6.1.4.1.75.6.3.2.2.1.1.2 |
hmMonPortReadableFramesThe number of frames of legal length that have not been corrupted while being received. It is equal to the sum of frames received ok and those received with only an out of range length error. It does not include frames received with frame-too-long, or FCS errors, nor frames lost due to internal MAC errors, nor frames that are short events (caused by noise) or hmMonPortRunts (caused by collisions).ro Counter .1.3.6.1.4.1.75.6.3.2.2.1.1.3 |
hmMonPortReadableOctetsThe number of data and padding octets contained in frames counted by hmMonPortReadableFrames. Note this does not count octets in a frame used in the preamble and the SFD of a packet.ro Counter .1.3.6.1.4.1.75.6.3.2.2.1.1.4 |
hmMonPortShortEventsA carrier sense event that lasts longer than 0 microseconds but less than or equal to 7.4 microseconds increments this counter. A carrier sense event that lasts longer than 7.4 but less than 8.2 microseconds increments either this counter or the hmMonPortRunts counter but not both.ro Counter .1.3.6.1.4.1.75.6.3.2.2.1.1.5 |
hmMonPortRuntsA carrier sense event that lasts longer than 7.4 microseconds but less than 8.2 microseconds increments either the hmMonPortShortEvents counter or this counter but not both. A carrier sense event that lasts at least 8.2 but not longer than 63.2 microseconds increments this counter. A carrier sense event that does not result from a collision and that lasts longer than 63.2 but less than 64.0 microseconds increments either this counter or the hmMonPortLateCollisions counter but not both.ro Counter .1.3.6.1.4.1.75.6.3.2.2.1.1.6 |
hmMonPortFrameCheckSeqErrorsThe number of frames that are an integral number of octets and do not pass the FCS check.ro Counter .1.3.6.1.4.1.75.6.3.2.2.1.1.7 |
hmMonPortAlignmentErrorsThe number of frames received on this port that are not an integral number of octets in length. This type of error takes precedence over hmMonPortFrameCheckSeqErrors (only the hmMonPortAlignmentErrors counter is incremented).ro Counter .1.3.6.1.4.1.75.6.3.2.2.1.1.8 |
hmMonPortFramesTooLongThe number of frames received that are greater than 1518 octets.ro Counter .1.3.6.1.4.1.75.6.3.2.2.1.1.9 |
hmMonPortAutoPartitionCountThe number of times that the repeater has automatically partitioned this port.ro Counter .1.3.6.1.4.1.75.6.3.2.2.1.1.10 |
hmMonPortDataRateMismatchesThe count of times that a packet has been received with the transmission frequency (data rate) detectably out of spec. This count may, but does not have to, include packets that were still able to be repeated (e.g., by having a sufficiently large fifo).ro Counter .1.3.6.1.4.1.75.6.3.2.2.1.1.11 |
hmMonPortLateCollisionsThe number of times this port detects a collision later than 512 bit times into the transmitted packet; hmMonPortLateCollisions are also counted as ubHmMonitorPortCollisions.ro Counter .1.3.6.1.4.1.75.6.3.2.2.1.1.12 |
hmAddrTrackCapability OBJECT IDENTIFIER .1.3.6.1.4.1.75.6.3.3 |
hmAddrTrackPort OBJECT IDENTIFIER .1.3.6.1.4.1.75.6.3.3.1 |
hmAddrTrackPortTable SEQUENCE OF HmAddrTrackPortEntry .1.3.6.1.4.1.75.6.3.3.1.1 |
hmAddrTrackPortEntry HmAddrTrackPortEntry .1.3.6.1.4.1.75.6.3.3.1.1.1 |
hmAddrTrackPortGroupIDThe relative slot number in an enclosure, starting with 1. This value is not greater than hmBasHubGroupCapacity.ro INTEGER .1.3.6.1.4.1.75.6.3.3.1.1.1.1 |
hmAddrTrackPortIDThe relative position of a port within a card starting with 1. The AUI port identifier is 13.ro INTEGER .1.3.6.1.4.1.75.6.3.3.1.1.1.2 |
hmAddrTrackPortLastSrcAddressThe source address of the last readable frame received by this port.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.75.6.3.3.1.1.1.3 |
hmAddrTrackPortSrcAddrChangesThe number of times that the value of hmAddrTrackPortLastSrcAddress has changed.ro Counter .1.3.6.1.4.1.75.6.3.3.1.1.1.4 |
ubExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.75.7 |
ubHm OBJECT IDENTIFIER .1.3.6.1.4.1.75.7.1 |
ubHmBasicCapability OBJECT IDENTIFIER .1.3.6.1.4.1.75.7.1.1 |
ubHmBasicGroup OBJECT IDENTIFIER .1.3.6.1.4.1.75.7.1.1.1 |
ubHmBasicGroupTable SEQUENCE OF UbHmBasicGroupEntry .1.3.6.1.4.1.75.7.1.1.1.1 |
ubHmBasicGroupEntry UbHmBasicGroupEntry .1.3.6.1.4.1.75.7.1.1.1.1.1 |
ubHmBasGroupIDThe relative slot number in an enclosure, starting with 1 (as numbered on the enclosure).ro INTEGER .1.3.6.1.4.1.75.7.1.1.1.1.1.1 |
ubHmBasGroupCarrierSensesThe number of times carrier sense was on when sampled every 10 milliseconds. Note that this attribute applies only in tier 1.ro Counter .1.3.6.1.4.1.75.7.1.1.1.1.1.2 |
ubHmBasGroupCustomCounterSlctnThis selects which one of various events on a port will increment the ubHmBasPortCustomCounter associated with that port. Setting this attribute also sets ubHmBasPortCustomCounter to zero. Each occurrence of the selected event increments ubHmBasPortCustomCounter. Note that this attribute only applies in tier 1.1. The following values each specify an attribute counter. * Non-collided packets is a composite of ReadableFrames + other frames with various errors not including hmMonHubTransmitCollisions, late collisions.rw Enumeration .1.3.6.1.4.1.75.7.1.1.1.1.1.3 |
ubHmBasGroupElectronicSerialNoA worldwide unique identifier for a concentrator. This is assigned from the address space of MAC addresses available to UB, and may be the same as a MAC address associated with the concentrator.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.75.7.1.1.1.1.1.4 |
ubHmBasGroupHealthStateIndicates whether there is a known operational failure or problem in the card. The values of hmBasGroupHealthText and hmBasGroupHealthData attributes may be consulted for more specific information.ro Enumeration .1.3.6.1.4.1.75.7.1.1.1.1.1.5 |
ubHmBasGroupHealthTextDisplayable information concerning the operational health of the card and its components. Note that ubHmBasGroupHealthState indicates whether the condition applies to a group or port. This attribute contains a string that is equivalent to or provides further explanation of the value of ubHmBasGroupHealthState as indicated in the following table:ubHmBasGroupHealthState: string1: 'Other'2: contains either 'Normal Operation', or the string that is the value of the object a1imPodDiagnosticMsg.3: 'Group Failure'4 'Port Failure'5: contains either 'Control Bus Error' , or 'Temperature Problem'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.75.7.1.1.1.1.1.6 |
ubHmBasGroupHealthDataNumeric information concerning the operational health of the group and its components. Note that ubHmBasGroupHealthState indicates whether the condition applies to a group or port. This attribute contains some numeric value that is equivalent to or provides further explanation of the value of ubHmBasGroupHealthState as indicated in the following table:ubHmBasGroupHealthState: value (string)1: 1 ('Other')2: contains either 1 ('Normal Operation'), or 2 (the string that is the value of the object a1imPodDiagnosticMsg)3: 1 ('Group Failure')4: 1 ('Port Failure')5: contains either 1 ('Control Bus Error'), or 2 ('Temperature Problem')ro OCTET STRING .1.3.6.1.4.1.75.7.1.1.1.1.1.7 |
ubHmBasicPort OBJECT IDENTIFIER .1.3.6.1.4.1.75.7.1.1.2 |
ubHmBasicPortTable SEQUENCE OF UbHmBasicPortEntry .1.3.6.1.4.1.75.7.1.1.2.1 |
ubHmBasicPortEntry UbHmBasicPortEntry .1.3.6.1.4.1.75.7.1.1.2.1.1 |
ubHmBasPortGroupIDThe relative slot number in an enclosure, starting with 1. This value is not greater than hmBasHubGroupCapacity.ro INTEGER .1.3.6.1.4.1.75.7.1.1.2.1.1.1 |
ubHmBasPortIDThe relative position of a port within a card starting with 1. The AUI port identifier is 13.ro INTEGER .1.3.6.1.4.1.75.7.1.1.2.1.1.2 |
ubHmBasPortAutoPartitionTypeIndicates the reason a port was auto-partitioned: either a continuous collision signal or more than 30 consecutive collisions.ro Enumeration .1.3.6.1.4.1.75.7.1.1.2.1.1.3 |
ubHmBasPortCarrierSensesThe number of times carrier sense was on when sampled every 10 milliseconds. Note this attribute applies in tier 1 only.ro Counter .1.3.6.1.4.1.75.7.1.1.2.1.1.4 |
ubHmBasPortCustomCounterA counter that is incremented by one of the following occurences on this port: collision, late collision, carrier too long, bad bit rate, missing SFD, short event, non-collided packet, or auto partition. The setting of ubHmBasGroupCustomCounterSlctn determines which of these events causes this counter to increment. See ubHmMonitorPortCollisions, hmMonPortLateCollisions, hmMonPortFramesTooLong, hmMonPortDataRateMismatches, ubHmMonitorPortMissingSFDs, hmMonPortShortEvents, ?, and hmMonPortAutoPartitionCount for a more detailed explanation of each type of respective event. Note this attribute only applies in tier 1.ro Counter .1.3.6.1.4.1.75.7.1.1.2.1.1.5 |
ubHmBasPortExtendedLengthMediaIndicates whether the segment from the (MDI, non-AUI) port is set to normal (as defined by 10BaseT) or extended length. Note that this does not apply to AUI (external MAU) ports.ro Enumeration .1.3.6.1.4.1.75.7.1.1.2.1.1.6 |
ubHmBasPortLinkStatusThe result of the latest link integrity test. Note that this does not apply to an AUI port.ro Enumeration .1.3.6.1.4.1.75.7.1.1.2.1.1.7 |
ubHmBasPortLinkTestAdminStateThe administrative state of the 10BaseT link integrity function. When locked, the port functions like an ASP-300. Note that this does not apply to an AUI port.rw Enumeration .1.3.6.1.4.1.75.7.1.1.2.1.1.8 |
ubHmBasPortPolarityReversStatIndicates if the transmit/receive polarity of the twisted pair port was determined to be incorrect and then automatically corrected. Note that this does not apply to an AUI port.ro Enumeration .1.3.6.1.4.1.75.7.1.1.2.1.1.9 |
ubHmBasPortInterfaceTypeIndicates the type of interface between the (physical) port to the physical medium.ro Enumeration .1.3.6.1.4.1.75.7.1.1.2.1.1.10 |
ubHmMonitorCapability OBJECT IDENTIFIER .1.3.6.1.4.1.75.7.1.2 |
ubHmMonitorGroup OBJECT IDENTIFIER .1.3.6.1.4.1.75.7.1.2.1 |
ubHmMonitorGroupTable SEQUENCE OF UbHmMonitorGroupEntry .1.3.6.1.4.1.75.7.1.2.1.1 |
ubHmMonitorGroupEntry UbHmMonitorGroupEntry .1.3.6.1.4.1.75.7.1.2.1.1.1 |
ubHmMonitorGroupIDThe relative slot number in an enclosure, starting with 1 (as numbered on the enclosure).ro INTEGER .1.3.6.1.4.1.75.7.1.2.1.1.1.1 |
ubHmMonGroupCollisionApSlctnSelects for all ports in this group which one of hmMonHubTransmitCollisions, hmMonPortLateCollisions, or hmMonPortAutoPartitionCount will increment. This applies only to tier 2. The default is hmMonHubTransmitCollisions.rw Enumeration .1.3.6.1.4.1.75.7.1.2.1.1.1.2 |
ubHmMonGroupCollisionsCounts the number of times any port in this group had a transmit collision. Simultaneous collisions on multiple ports are counted as only one group collision. Note that the total of groupCollisions is not necessarily hmMonHubTransmitCollisions (in the hub).ro Counter .1.3.6.1.4.1.75.7.1.2.1.1.1.3 |
ubHmMonGroupLateCollisionsCounts the number of times any port in this group had transmit and receive active concurrently but late. Simultaneous late collisions on multiple ports are counted as only one group late collision.ro Counter .1.3.6.1.4.1.75.7.1.2.1.1.1.4 |
ubHmMonGroupTotalOctetsro Counter .1.3.6.1.4.1.75.7.1.2.1.1.1.5 |
ubHmMonGroupResetDrblUserAttrsA request to copy the default values stored in durable memory to the User Durable attributes also in durable memory. The User attributes affected are ubHmBasPortLinkTestAdminState, ubHmBasPortExtendedLengthMedia, hmBasPortAdminState, and a1gEthBusMgmtStatus.rw Enumeration .1.3.6.1.4.1.75.7.1.2.1.1.1.6 |
ubHmMonitorPort OBJECT IDENTIFIER .1.3.6.1.4.1.75.7.1.2.2 |
ubHmMonitorPortTable SEQUENCE OF UbHmMonitorPortEntry .1.3.6.1.4.1.75.7.1.2.2.1 |
ubHmMonitorPortEntry UbHmMonitorPortEntry .1.3.6.1.4.1.75.7.1.2.2.1.1 |
ubHmMonitorPortGroupIDThe relative slot number in an enclosure, starting with 1. This value is not greater than hmBasHubGroupCapacity.ro INTEGER .1.3.6.1.4.1.75.7.1.2.2.1.1.1 |
ubHmMonitorPortIDThe relative position of a port within a card starting with 1. The AUI port identifier is 13.ro INTEGER .1.3.6.1.4.1.75.7.1.2.2.1.1.2 |
ubHmMonitorPortBadPacketsA sum of hmMonPortFrameCheckSeqErrors, hmMonPortFramesTooLong, and hmMonPortAlignmentErrors.ro Counter .1.3.6.1.4.1.75.7.1.2.2.1.1.3 |
ubHmMonitorPortCollisionsThe number of times this port had transmit and receive active concurrently. Note that the sum of all port collisions in a group is not necessarily ubHmMonGroupCollisions.ro Counter .1.3.6.1.4.1.75.7.1.2.2.1.1.4 |
ubHmMonitorPortLastErrorSARcvdThe source MAC address of the last frame received with an error. See ubHmMonitorPortLastRcvdFrmErr for a list of the types of errors considered. Note that this address may be corrupted, and hence not the correct MAC address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.75.7.1.2.2.1.1.5 |
ubHmMonitorPortLastRcvdFrmErrThe type of error in the frame whose source address is in ubHmMonitorPortLastErrorSARcvd. The leftmost bit in the octet string is numbered 1, and successive bits are numbered successively. The meaning of each bit is as follows: frameTooLong(1), 'Frame Too Long' excessiveJitter(2), 'Carrier Error' badBitRates(3), 'Bad Bit Rates':elasticity buffer error (FIFO) carrierTooLong(4), 'Carrier Too Long' alignment(5), 'Alignment Error' fcs(6), 'FCS Error' notApplicable(7) 'N/A'ro OCTET STRING .1.3.6.1.4.1.75.7.1.2.2.1.1.6 |
ubHmMonitorPortMissingSFDsThe number of times this port detects a double-zero before a start frame delimiter.ro Counter .1.3.6.1.4.1.75.7.1.2.2.1.1.7 |
ubHmMonitorPortOutOfRngLenFldsThe number of frames with a length field whose value is greater than the maximum value allowed for LLC frames (1500 or 5DC hex). This could be used to count Ethernet frames (length fields whose values are 600 hex or greater). Note these frames will also be counted as hmMonPortReadableFrames.ro Counter .1.3.6.1.4.1.75.7.1.2.2.1.1.8 |
ubHmMonitorPortTotalOctetsThe number of hmMonPortReadableOctets plus other octets (not data or padding) in frames counted by hmMonPortReadableFrames.ro Counter .1.3.6.1.4.1.75.7.1.2.2.1.1.9 |
ubHmAddrTrackCapability OBJECT IDENTIFIER .1.3.6.1.4.1.75.7.1.3 |