TROPIC-PTP-MIB
AI MIB Summary
The TROPIC-PTP-MIB module enables the monitoring and management of 1588v2 (PTP) synchronization sessions and timing parameters on Nokia OPD-WDM optical transport hardware. It provides access to critical metrics such as clock state, grandmaster synchronization status, and PTP event message statistics for maintaining sub-microsecond timing accuracy across the network.
Nokia OPD-WDM MIB for 1588V2 module
Main OID:
tnPtpMibModule.1.3.6.1.4.1.7483.1.1.2.2.4.7
227
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
227 total| Object Name |
|---|
tnPtpMibModuleNokia OPD-WDM MIB for 1588V2 module MODULE-IDENTITY .1.3.6.1.4.1.7483.1.1.2.2.4.7 |
tnPtpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.9.1 |
tnPtpSystem OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.9.1.1 |
tnPtpSystemTableThis table provides global parameters for a PTP-capable card. Unknown .1.3.6.1.4.1.7483.2.2.4.9.1.1.1 |
tnPtpSystemEntryConfiguration information concerning PTP of the card. TnPtpSystemEntry .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1 |
tnPtpSystemClockModeThis parameter determines the PTP operational mode of the card. It is intended to be managed by the System Operator. 0: 1588 function of this card is disabled 1: Ordinary Clock - Slave 2: Ordinary Clock - Master 3: Boundary Clock 4: End-to-End Transparent Clock 5: Peer-to-Peer Transparent Clock 6: End-to-End Transparent Clock And OC-Slave 7: End-to-End Transparent Clock And BC 8: Peer-to-Peer Transparent Clock And OC-Slave 9: this card provides timestamping for the local ports only, need to work with the PTPCTL card 10: ITU-T G.8275.1 T-GM 11: ITU-T G.8275.1 T-BC 12: ITU-T G.8275.1 T-TSC.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.1 |
tnPtpSystemFrequencyReferenceThis parameter determines the frequency reference for the PTP clocks in the card. It is intended to be managed by the System Operator. This parameter is valid when the tnPtpSystemClockMode = 1/2/3/6/7/8 0: the local PTP clock uses the physical layer frequency reference, and this clock is syntonized with the PTP master. 1: the local PTP clock uses the physical layer frequency reference, but this clock is' unsyntonized with the PTP master. 2: the local PTP clock uses the packet layer frequency reference which is recovered from the PTP.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.2 |
tnPtpSystemTimeReferenceThis parameter determines the time reference for the local PTP clocks in the card. It is intended to be managed by the System Operator. This parameter is valid when the tnPtpSystemClockMode = 2/3 0: no reference. 1: the external 1pps. The local PTP clock aligns the 1588 time to the phase of the external 1pps. 2: the external ToD 3: the recovered PTP time. 4: the external ToD or the recovered PTP time. Values of 0/1/2 apply to OC-Master only; Values of 2/3/4 apply to BC only.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.3 |
tnPtpSystemNextClockNumberThis parameter indicates the next available clock number in the card, which will be used when the user wants to create a new row in the tnPtpClockDefaultDSConfigTable.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.4 |
tnPtpSystemClockProfileThis parameter determines the PTP profile of the card. It is intended to be managed by the System Operator. 0: IEEE_1588_2008_CCSA profile 1: G_8275_1 profile.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.5 |
tnPtpSystemClockServoModeThis parameter determines the PTP Servo Mode of the card. It is intended to be managed by the System Operator. 0: bellLabs 1: standardrw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.6 |
tnPtpSystemToDMessageTypeToD message format type. 0: ccsa 1: itu.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.7 |
tnPtpClock OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.9.1.2 |
tnPtpClockDefaultDSConfigTableThis table provides configurable information for an OC/BC PTP clock. For TC (E2E or P2P), this table is not available. SEQUENCE OF TnPtpClockDefaultDSConfigEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.1 |
tnPtpClockDefaultDSConfigEntryConfigurations of an OC/BC PTP clock. TnPtpClockDefaultDSConfigEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1 |
tnPtpClockIndexA unique value which identifies a PTP clock in an NE. AluWdmPtpClockIndex .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.1 |
tnPtpClockDefaultDSConfigDomainThe domain associated with the PTP clock.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.2 |
tnPtpClockDefaultDSConfigPriority1The priority1 value of the PTP clock.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.3 |
tnPtpClockDefaultDSConfigPriority2The priority2 value of the PTP clock.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.4 |
tnPtpClockDefaultDSConfigPreferedGMThe identifier of a PTP clock that the local PTP clock will lock to. It is for static master clock selection. It is valid for OC-slave or BC. And for BC, it is valid only when tnPtpSystemTimeReference =3. NULL is initializing value.rw AluWdmPtpClockIdentifier .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.5 |
tnPtpClockDefaultDSConfigIpAddressTypeThis parameter indicates the IP address type for tnPtpClockDefaultDSConfigIpAddress. The default value is IPv4(1).rw InetAddressType .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.6 |
tnPtpClockDefaultDSConfigIpAddressThe unicast IP address of the PTP clock. NULL is initializing value.rw InetAddress .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.7 |
tnPtpClockDefaultDSConfigAdminStatusIt is used for the user to enable/disable the PTP clock. 0: Disable 1: Enable.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.8 |
tnPtpClockDefaultDSConfigRowStatusThe RowStatus of PTP clock entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.9 |
tnPtpClockDefaultDSConfigLocalPriorityThe localPriority value of the PTP clock.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.10 |
tnPtpClockDefaultDSConfigMaxStepsRemovedA clock would not qualify any Announce messages received where the stepsRemoved field in the ingress header matched or exceeded the maxStepsRemoved field.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.11 |
tnPtpClockDefaultDSConfigEPRTCSupportEnable/Disable Enhanced Primary Reference Time Clock.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.12 |
tnPtpClockDefaultDSConfigSyncUncertainMonEnable/Disable Synchronization Uncertain Indication Monitoring.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.13 |
tnPtpClockDefaultDSInfoTableThis table provides non-configurable information for an OC/BC PTP clock. For TC (E2E or P2P), this table is not available. SEQUENCE OF TnPtpClockDefaultDSInfoEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.2 |
tnPtpClockDefaultDSInfoEntryInformation of an OC/BC PTP clock TnPtpClockDefaultDSInfoEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1 |
tnPtpClockDefaultDSInfoIdentifierThe identifier of the PTP clock.ro AluWdmPtpClockIdentifier .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.1 |
tnPtpClockDefaultDSInfoTwoStepFlagThis is an indicator of whether master-slave synchronization utilizes follow-up messaging (IEEE 1588-2008 Section 8.2.1.2.1.). This parameter is read-only. A PTP port has a configurable parameter which determines if follow-up messaging will be used for this port. true: If some of the PTP ports in the clock use follow-up messaging. false: If none of the PTP ports in the clock use follow-up messaging. Only false is supported in the current PTP implementation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.2 |
tnPtpClockDefaultDSInfoNumberOfPortsThe number of PTP ports in the PTP clock.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.3 |
tnPtpClockDefaultDSInfoClassThe clock class on the PTP clock (IEEE1588-2008 Section 8.2.1.3.1.1).ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.4 |
tnPtpClockDefaultDSInfoAccuracyThe accuracy of the PTP clockro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.5 |
tnPtpClockDefaultDSInfoOffsetScaledLogVarianceThe frequency offset scaled log variance of the PTP clock (IEEE P1588-2008 Section 7.6.3).ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.6 |
tnPtpClockDefaultDSInfoSignalFailPTPClock Signal Fail Flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.7 |
tnPtpClockCurrentDSTableThis table provides tn PTP Clock current Data Set for an OC/BC PTP Clock. For TC (E2E or P2P), this table is not available. SEQUENCE OF TnPtpClockCurrentDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.3 |
tnPtpClockCurrentDSEntryOperational information of a PTP clock. TnPtpClockCurrentDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1 |
tnPtpClockCurrentDSOffSetFromMasterThe current value of the time difference between a master and a slave as computed by the slave. The unit is ns (nano-seconds). Refer to Section 8.2.2.3 of IEEE1588-2008.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.1 |
tnPtpClockCurrentDSMeanPathDelayThe mean propagation time between a master and a slave as computed by the slave. The unit is ns (nano-seconds). Refer to Section 8.2.2.4 of IEEE1588-2008.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.2 |
tnPtpClockCurrentDSCurrentTimeThe current time of the PTP clock. ASCII encoded decimal number in units of seconds with a precision of 9.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.3 |
tnPtpClockCurrentDSRecoveredClockStateThe synchronization state of the PTP clock.ro AluWdmPtpRecoveredClockState .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.4 |
tnPtpClockCurrentDSLockedPtpPortThe number or index of the PTP port where the PTP clock is locked to. This parameter together with the tnPtpClockIndex points to a row of the tnPtpPortDSConfigTable. It is meaningful fo OC-slave or BC. And for BC, it is valid only when tnPtpSystemTimeReference = (the recovered PTP time).ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.5 |
tnPtpClockCurrentDSStepsRemovedThe number of PTP clocks along the timing distribution path from the Grandmaster to the local PTP clock.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.6 |
tnPtpClockParentDSTableThis table provides information of the Parent Data Set for an OC/BC PTP clock. For TC (E2E or P2P), this table is not available. SEQUENCE OF TnPtpClockParentDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.4 |
tnPtpClockParentDSEntryParent clock information of an OC/BC clock TnPtpClockParentDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1 |
tnPtpClockParentDSIdentifierIdentifier of the parent clock which the local PTP clock locks to. If a PTP clock locks to an external ToD input interface, it should be equal to: 1 - for 1pps/ToD interface #1 2 - for 1pps/ToD interface #2.ro AluWdmPtpClockIdentifier .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.1 |
tnPtpClockParentDSPortNumThe PTP port number of the parent clock, via which the local PTP clock is synchronizing to the parent clock.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.2 |
tnPtpClockParentDSStatsThis is an indicator of whether the stats of the parent clock are collected by the local PTP clock.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.3 |
tnPtpClockParentDSOffsetScaledLogVarianceThe frequency offset scaled log variance of the parent clock (IEEE P1588-2008 Section 7.6.3).ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.4 |
tnPtpClockParentDSPhaseChangeRateThe phase change rate of the parent clock(IEEE P1588-2008 Section 7.6.3).ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.5 |
tnPtpClockParentDSGrandmasterClockIdThe clock identifier of the grandmaster which the parent clock locks to.ro AluWdmPtpClockIdentifier .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.6 |
tnPtpClockParentDSGrandmasterClassThe clock class of the grandmaster which the parent clock locks to.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.7 |
tnPtpClockParentDSGrandmasterAccuracyThe accuracy of the grandmaster which the parent clock locks to.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.8 |
tnPtpClockParentDSGrandmasterOffsetScaledLogVarianceThe OffsetScaledLogVariance value of the grandmaster which the parent clock locks to.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.9 |
tnPtpClockParentDSGrandmasterPriority1The priority1 value of the grandmaster which the parent clock locks to.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.10 |
tnPtpClockParentDSGrandmasterPriority2The priority2 value of the grandmaster which the parent clock locks to.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.11 |
tnPtpClockTimePropertiesDSTableThis table provides the information of the Time Properties Data Set for an OC/BC PTP clock. For TC (E2E or P2P), this table is not available. SEQUENCE OF TnPtpClockTimePropertiesDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.5 |
tnPtpClockTimePropertiesDSEntryTime properties information of an OC/BC PTP clock. TnPtpClockTimePropertiesDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1 |
tnPtpClockTimePropertiesDSCurrentUtcOffsetThe current UTC offset value. Refer to Section 8.2.4.2 of IEEE1588-2008. The unit is seconds.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.1 |
tnPtpClockTimePropertiesDSCurrentUtcOffsetValidThis parameter indicates whether current UTC offset is valid or not. Refer to Section 8.2.4.3 of IEEE1588-2008.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.2 |
tnPtpClockTimePropertiesDSLeap59This parameter indicates whether the last minute of the current UTC day contains 59 seconds or not. Refer to Section 8.2.4.4 of IEEE1588-2008.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.3 |
tnPtpClockTimePropertiesDSLeap61This parameter indicates whether the last minute of the current UTC day contains 61 seconds or not. Refer to Section 8.2.4.5 of IEEE1588-2008.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.4 |
tnPtpClockTimePropertiesDSTimeTraceableThis parameter indicates whether the timescale or the current UTC offset are traceable to a primary reference or not. Refer to Section 8.2.4.6 of IEEE1588-2008.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.5 |
tnPtpClockTimePropertiesDSFrequencyTraceableThis parameter indicates whether the frequency determining the timescale is traceable to a primary reference or not. Refer to Section 8.2.4.7 of IEEE1588-2008.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.6 |
tnPtpClockTimePropertiesDSPtpTimescaleThis parameter indicates the type of time scale of the grandmaster clock: true: PTP timescale false: ARB timescale Refer to Section 8.2.4.8 of IEEE1588-2008.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.7 |
tnPtpClockTimePropertiesDSPtpTimeSourceThis parameter indicates the timesource used by grandmaster clock: -0x10: ATOMIC_CLOCK -0x20: GPS -0x30: TEERESTRIAL_RADIO -0x40: PTP -0x50: NTP -0x60: HAND_SET -0x90: OTHER -0xA0: INTERNAL_OSCILLATOR Refer to Section 8.2.4.9 of IEEE1588-2008.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.8 |
tnPtpClockTimePropertiesDSSyncUncertainFlagThis parameter indicates if the SynchronizationUncertain flag of incoming announce message from the parent clock is TRUE or FALSE. It is valid only when the PTP profile is itug8275dot1 and the SyncUncertainMon is ENABLE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.9 |
tnPtpClockPathTraceDSTableThis table provides tn PTP Clock Path Trace Data Set for a PTP Clock. SEQUENCE OF TnPtpClockPathTraceDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.6 |
tnPtpClockPathTraceDSEntryPath Trace Data Set of a PTP Clock. TnPtpClockPathTraceDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.6.1 |
tnPtpClockPathTraceDSEnableEnable/Disable the Path Trace mechanism.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.2.6.1.1 |
tnPtpClockPathTraceDSListA list of ClockIdentity values. The length of one ClockIdentity is 8.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.9.1.2.6.1.2 |
tnPtpClockSyncOamTableThis table provides the PTP Clock Sync OAM attributes. SEQUENCE OF TnPtpClockSyncOamEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.7 |
tnPtpClockSyncOamEntryPTP Clock Sync OAM attributes. TnPtpClockSyncOamEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1 |
tnPtpClockRealtimeTimeOffsetDurationDuration time(minute) for the PTP Clock Realtime Time Offset. Range: 1 to 15 minutes.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.1 |
tnPtpClockRealtimeTimeOffsetIntervalInterval time(second) for the PTP Clock Realtime Time Offset. Range: 1 to 5 seconds.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.2 |
tnPtpClockRealtimeTimeOffset1The PTP Clock Realtime Time Offset part 1. Every Time Offset value is an Integer32(4-byte). The maximum size of tnPtpClockRealtimeTimeOffset1, tnPtpClockRealtimeTimeOffset2, and tnPtpClockRealtimeTimeOffset3 is 1200-byte, which is 300 Time Offset values. The number of Time Offset is decided by Duration(tnPtpClockRealtimeTimeOffsetDuration) and Interval(tnPtpClockRealtimeTimeOffsetInterval). For example: Duration = 12(minutes), equals to 720 seconds; Interval = 2(seconds). Then the number of Time Offset = Duration / Interval = 720 / 2 = 360 There will be totally 360 Time Offset values in tnPtpClockRealtimeTimeOffset1, tnPtpClockRealtimeTimeOffset2, and tnPtpClockRealtimeTimeOffset3. tnPtpClockRealtimeTimeOffset1 contains the Time Offset value 1 to 300, size will be 300*4=1200 bytes, 300 Integer32 values. tnPtpClockRealtimeTimeOffset2 contains the Time Offset value 301 to 360, size will be 60*4=240 bytes, 60 Integer32 values. tnPtpClockRealtimeTimeOffset3 contains NO Time Offset values, size will be 0 empty. The range of the Time Offset value is 0x80000001(-2147483647) to 0x7FFFFFFF(2147483647). Special Time Offset value 0x80000000 represents that the Realtime Time Offset is Not Available(NA).ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.3 |
tnPtpClockRealtimeTimeOffset2The PTP Clock Realtime Time Offset part 2. Refer to tnPtpClockRealtimeTimeOffset1.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.4 |
tnPtpClockRealtimeTimeOffset3The PTP Clock Realtime Time Offset part 3. Refer to tnPtpClockRealtimeTimeOffset1.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.5 |
tnPtpClockSyncLossDetectionIntervalThe number of SYNC Interval to raise PtpClock SYNCLOSS alarm. Range: 2 to 255.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.6 |
tnPtpClockDelayRespLossDetectionIntervalThe number of DELAY_RESP Interval to raise PtpClock DELAYRESPLOSS alarm. Range: 2 to 255.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.7 |
tnPtpClockPtpInputDegradeThresholdThe Threshold value to raise PtpClock PTPINPUTDEG alarm. For IEEE_1588_2008_CCSA profile, valid values are 6, 7, 8, 52, 187. For G_8275_1 profile, valid values are 6, 7, 135, 140, 150, 160, 165, 248.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.8 |
tnPtpClockTimeErrorReferencePortIndexThe Reference Input 1PPS/ToD port index for the PTP Time Error(PTERREF).rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.9 |
tnPtpClockGenericTableThis table provides generic information for a PTP clock. SEQUENCE OF TnPtpClockGenericEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.8 |
tnPtpClockGenericEntryGeneric information for a PTP clock. TnPtpClockGenericEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.8.1 |
tnPtpClockModeThis parameter determines the PTP operational mode of the card. It is intended to be managed by the System Operator. 0: 1588 function of this card is disabled 1: Ordinary Clock - Slave 2: Ordinary Clock - Master 3: Boundary Clock 10: ITU-T G.8275.1 T-GM 11: ITU-T G.8275.1 T-BC 12: ITU-T G.8275.1 T-TSC 13: ITU-T G.8275.1 T-TC Carrier TC 14: Combined Carrier TC, ITU-T G.8275.1 T-TSC + Carrier TC 15: ITU-T G.8275.1 T-TC Client TC.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.8.1.1 |
tnPtpClockAlmProfNameASAP (alarm severity assignment profile) Name for PTP clock.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.9.1.2.8.1.2 |
tnPtpTransparentClockDefaultDSTableThis table provides the default data set of Transparent Clock. Refer to 8.3.2 transparentClockDefaultDS data set member specifications. SEQUENCE OF TnPtpTransparentClockDefaultDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.9 |
tnPtpTransparentClockDefaultDSEntryDefault data set of Transparent Clock. TnPtpTransparentClockDefaultDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1 |
tnPtpTransparentClockDefaultDSClockIdentityThe clockIdentity of the Transparent Clock.ro AluWdmPtpClockIdentifier .1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.1 |
tnPtpTransparentClockDefaultDSNumberPortsThe number of PTPPorts of the Transparent Clock.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.2 |
tnPtpTransparentClockDefaultDSDelayMechanismE2E(end-to-end) or P2P(peer-to-peer) Transparent Clock.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.3 |
tnPtpTransparentClockDefaultDSPrimaryDomainThe domainNumber of the primary syntonization domain.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.4 |
tnPtpPort OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.9.1.3 |
tnPtpPortNextIndexTableThis table provides the next available index for a PTP port to be created in a PTP clock. SEQUENCE OF TnPtpPortNextIndexEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.1 |
tnPtpPortNextIndexEntryNext available index for a PTP port to be created in a PTP clock. TnPtpPortNextIndexEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.1.1 |
tnPtpPortNextIndexThis parameter indicates the next available index for a PTP port to be created in a PTP clock, which will be used when the user wants to create a new row in tnPtpPortDSConfigTable.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.1.1.1 |
tnPtpPortDSConfigTableThis table provides configuration for a PTP port. SEQUENCE OF TnPtpPortDSConfigEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.2 |
tnPtpPortDSConfigEntryConfiguration information concerning a PTP port. TnPtpPortDSConfigEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1 |
tnPtpPortDSPortIndexThe value of tnPtpPortDSPortIndex uniquely identifies a PTP port in a PTP clock. It equals to the portNumber used in the PTP message. Refer to Section 7.5.2.3 of IEEE1588-2008. Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.1 |
tnPtpPortDSConfigAssociatedPhysicalPortThe physical port which this PTP port is associated to. For the same physical port, it has the same value as 'ifIndex' of the card's port table.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.2 |
tnPtpPortDSConfigVlanVIDThe VLAN-ID of the Vlan tag for the tx/rx PTP messages. It shall be within the range of [0,4094], 0 means untagged.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.3 |
tnPtpPortDSConfigVlanTPIDThe TPID of the Vlan tag for the tx/rx PTP messages. It is valid when tnPtpPortDSConfigVlanVID is not 0.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.4 |
tnPtpPortDSConfigAnnoRxTimeoutThe administrative value for the number of timeouts for the announce message associated with the 1588 PTP reference/port. The total time in seconds to timeout is calculated by the tnPtpPortDSAnnoRxTimeout * 2 ^ tnPtpPortDSLogAnnoInterval. Current configurable range: 2 to 255.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.5 |
tnPtpPortDSConfigLogAnnoIntervalThe administrative value, which is represented as logarithm to the base 2 of the transmission interval for the announce message in this PTP port. Valid values: -4, -3, -2, -1, 0, 1, 2, 3, 4.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.6 |
tnPtpPortDSConfigLogSyncIntervalThe administrative value, which is represented as logarithm to the base 2 of the transmission interval for the sync message in this PTP port. Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.7 |
tnPtpPortDSConfigLogDelayReqIntervalThe administrative value, which is represented as logarithm to the base 2 of the transmission interval for the delay_req message in this PTP port. Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.8 |
tnPtpPortDSConfigLogMinPDelayReqIntervalThe administrative value, which is represented as logarithm to the base 2 of the transmission interval for the pdelay_req message in this PTP port. Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.9 |
tnPtpPortDSConfigAdminStatusIt is used for the user to administratively manage the PTP protocols on the PTP port 0: Disable 1: Enable 2: MT1 (maintenance state 1) 3: MT2 (maintenance state 2).rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.10 |
tnPtpPortDSConfigRoleIt is used for the user to set the role of the PTP port. It is valid for BC only. 0: Automatic 1: Slave 2: Master 3: Passive.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.11 |
tnPtpPortDSConfigDelayMechanismThe delay mechanism for the PTP port.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.12 |
tnPtpPortDSConfigVersionNumberThe protocol version to be supported in the PTP port.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.13 |
tnPtpPortDSConfigAsymCorrectionIt allows the user to specify the correction delay for asymmetrical network path. Refer to Section 7.4.2 of IEEE1588-2008. Value range: {-100ms, +100ms}. The unit of this attribute shall be ns and the steps of this attribute shall be 1ns.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.14 |
tnPtpPortDSConfigTwoStepFlagThis parameter determines if follow-up messaging will be used for this PTP port. true: If the port will use follow-up messaging false: If the port will not use follow-up messaging. Only false is supported in the current PTP implementation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.15 |
tnPtpPortDSConfigEncapTypeThe encapsulation type to transport PTP for the PTP port: 1: UDP/IPv4 per IEEE1588-2008 Annex D 2: UDP/IPv6 per IEEE1588-2008 Annex D 3: Ethernet per IEEE1588-2008 Annex F.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.16 |
tnPtpPortDSConfigAddressingModeIndicates addressing mode of the PTP message in the PTP port: - 0: Multicast for all PTP messages - 1: Unicast for all PTP messages with the provisioned destination address. - 2: Hybrid mode. The Delay_Req and Delay_Resp messages are sent with the unicast address while other PTP messages are sent with the multicast address.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.17 |
tnPtpPortDSConfigUnicastForDelayReqIndicates how the Delay_Req message is sent in the PTP port regarding the destination address. This parameter is valid only when tnPtpPortAddressingMode is Multicast true: The port sends the Delay_Req message with unicast address. false: The port sends the Delay_Req message with multicast address.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.18 |
tnPtpPortDSConfigUnicastNegotiationAn administrative value indicating whether the unicast negotiation function is enabled or disabled for the PTP port. It is valid when tnPtpPortAddressingMode is Multicast. true: Unicast negotiation is enabled. false: Unicast negotiation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.19 |
tnPtpPortDSConfigDestMacThe unicast destination MAC address for the transmitted PTP messages of the PTP port. It will only be applicable when (tnPtpPortEncapType == 3 ) and (tnPtpPortAddressingMode == 1).rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.20 |
tnPtpPortDSConfigDestIpAddrTypeThe parameter indicates the IP address type for tnPtpPortDSConfigDestIpAddr.rw InetAddressType .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.21 |
tnPtpPortDSConfigDestIpAddrThe unicast destination IPv4/IPv6 address for the transmitted PTP messages of the PTP port. It will only be applicable when (tnPtpPortEncapType == 1 or 2) and (tnPtpPortAddressingMode == 1).rw InetAddress .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.22 |
tnPtpPortDSConfigRowStatusThe RowStatus of the PTP Port entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.23 |
tnPtpPortDSConfigConnectedPtpioTimingPortThe timing port of the PTPIO card which this PTP port is connected to. It has the same value as 'ifIndex' of the card's port table. To unconnect a PTP port from a PTPIO timing port, set this parameter to 0.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.24 |
tnPtpPortDSConfigAutoLinkAsyMeasureTriggerThe action to trigger automatic link asymmetry measurement. true - trigger automatic link asymmetry measurement false - no action.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.25 |
tnPtpPortDSConfigNotSlaveAn administrative value indicating whether the ptp port can be placed in the SLAVE state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.26 |
tnPtpPortDSConfigLocalPriorityThe localPriority value of the PTP port.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.27 |
tnPtpPortDSConfigAssociatedEntityTypeIndicates the Associated Entity Type of the PTP port. 0: N/A, NOT Applicable 1: Physical PORT 2: Service 3: ERP Ringrw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.28 |
tnPtpPortDSConfigAssociatedEntityIDIndicates the Associated Entity ID(8-byte) of the PTP port. The first 4-byte is shelfId/slotId/0/0. The last 4-byte is portId or serviceId or ringId depends on tnPtpPortDSConfigAssociatedEntityType.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.29 |
tnPtpPortDSConfigClearMsgCounterClears the Message Counter of the PTP port. The 32-bit value is defined as below: +----------+----------------------------+ | 32 11 | 10 1 | +----------+----------------------------+ | reserved | message type and direction | +----------+----------------------------+ Bit 1 to bit 10 for type and direction of the message counter to be cleared. Set one or more bits to 1 to clear specified message counters. bit 1 - AnnounceTx bit 2 - AnnounceRx bit 3 - SyncTx bit 4 - SyncRx bit 5 - DelayReqTx bit 6 - DelayReqRx bit 7 - DelayRespTx bit 8 - DelayRespRx bit 9 - FollowUpTx bit 10 - FollowUpRx Other bits (bit 11 to bit 32) are reserved for future, and suggest to be 0.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.30 |
tnPtpPortDSConfigSyncReceiptTimeoutThe number of timeout intervals for the PTPPort sync message. The total time in seconds to timeout is calculated by tnPtpPortDSConfigSyncReceiptTimeout * ( 2 ^ tnPtpPortDSConfigLogSyncInterval ).rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.31 |
tnPtpPortDSConfigDelayRespReceiptTimeoutThe number of timeout intervals for the PTPPort DelayResponse message. The total time in seconds to timeout is calculated by tnPtpPortDSConfigDelayRespReceiptTimeout * ( 2 ^ tnPtpPortDSConfigLogDelayReqInterval ).rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.32 |
tnPtpPortDSInfoTableThis table contains non-configurable information of a PTP port SEQUENCE OF TnPtpPortDSInfoEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.3 |
tnPtpPortDSInfoEntryNon-configurable information of a PTP port. TnPtpPortDSInfoEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1 |
tnPtpPortDSInfoPeerPathDelayIt's an estimate of the current one-way propagation delay on the link attached to the PTP port. The unit is ns. This attribute is valid only when tnPtpPortDSConfigDelayMechanism = p2p.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.1 |
tnPtpPortDSInfoPortOperStateThe state of the PTP port.ro AluWdmtnPtpPortState .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.2 |
tnPtpPortDSInfoNumOfSessionsThe parameter indicates the number of the active sessions of the PTP port.rodeprecated Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.3 |
tnPtpPortDSInfoAutoLinkAsyMeasureStatusThe parameter indicates the state of the automatic measurement trigger. 0 - noTrigger 1 - inProgress 2 - successful 3 - noMsgReceived 4 - noMsgReceivedAfterSwap 5 - oswFailure 6 - unstable timestamps.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.4 |
tnPtpPortDSInfoMeasuredLinkAsymmetryThe parameter indicates the measured delay asymmetry of the PTP port. It is valid only when tnPtpPortDSInfoAutoMeasureStatus = 1.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.5 |
tnPtpPortDSInfoAnnounceMsgTxIndicates the number of Announce packets transmitted to this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.6 |
tnPtpPortDSInfoAnnounceMsgRxIndicates the number of Announce packets received from this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.7 |
tnPtpPortDSInfoSyncMsgTxIndicates the number of Sync packets transmitted to this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.8 |
tnPtpPortDSInfoSyncMsgRxIndicates the number of Sync packets received from this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.9 |
tnPtpPortDSInfoDelayReqMsgTxIndicates the number of Delay Request packets transmitted to this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.10 |
tnPtpPortDSInfoDelayReqMsgRxIndicates the number of Delay request packets received from this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.11 |
tnPtpPortDSInfoDelayRspMsgTxIndicates the number of Delay response packets transmitted to this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.12 |
tnPtpPortDSInfoDelayRspMsgRxIndicates the number of Delay response packets received from this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.13 |
tnPtpPortDSInfoSignalingMsgTxIndicates the number of Signaling packets transmitted to this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.14 |
tnPtpPortDSInfoSignalingMsgRxIndicates the number of Signaling packets received from this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.15 |
tnPtpPortDSInfoManagementMsgTxIndicates the number of Management packets transmitted to this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.16 |
tnPtpPortDSInfoManagementMsgRxIndicates the number of Management packets received from this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.17 |
tnPtpPortDSInfoFollowUpMsgTxIndicates the number of FollowUp packets transmitted to this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.18 |
tnPtpPortDSInfoFollowUpMsgRxIndicates the number of FollowUp packets received from this port.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.19 |
tnPtpPortDSInfoPhyPortMacThe MAC address of the associated physical port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.20 |
tnPtpPortDSInfoSignalFailPTPPort Signal Fail Flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.21 |
tnPtpPortGenericTableThis table provides generic information for a PTP port. SEQUENCE OF TnPtpPortGenericEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.5 |
tnPtpPortGenericEntryGeneric information for a PTP port. TnPtpPortGenericEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.5.1 |
tnPtpPortAlmProfNameASAP(alarm severity assignment profile) Name for PTP port.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.9.1.3.5.1.1 |
tnPtpPortIsVirtualThis PTPPort is a Virtual PTPPort(associated with ToD port) or NOT.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.3.5.1.2 |
tnPtpTransparentClockPortDSTableThis table provides the data set of Transparent Clock PTP port. Refer to 8.3.3 transparentClockPortDS data set member specifications. SEQUENCE OF TnPtpTransparentClockPortDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.6 |
tnPtpTransparentClockPortDSEntryData set of the PTP port of Transparent Clock. TnPtpTransparentClockPortDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.6.1 |
tnPtpTransparentClockPortDSPortIdentityThe PortIdentity attribute of the PTP port.ro AluWdmPtpPortIdentity .1.3.6.1.4.1.7483.2.2.4.9.1.3.6.1.1 |
tnPtpTransparentClockPortDSFaultyFlagThe value shall be TRUE if the PTP port is faulty and FALSE if the PTP port is operating normally. The initialization value shall be FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.3.6.1.2 |
tnPtpPortSourceInfoDSTableThis table provides the Source Information DataSet of a PTP port, to participate the Best Master Clock Comparison. SEQUENCE OF TnPtpPortSourceInfoDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.7 |
tnPtpPortSourceInfoDSEntrySource Information DataSet of a Virtual PTP port. TnPtpPortSourceInfoDSEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1 |
tnPtpPortSourceInfoDSGmClockIdentityPTPPort Source Information GM ClockIdentity.ro AluWdmPtpClockIdentifier .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.1 |
tnPtpPortSourceInfoDSGmClockClassPTPPort Source Information GM ClockClass.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.2 |
tnPtpPortSourceInfoDSGmClockAccuracyPTPPort Source Information GM ClockAccuracy.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.3 |
tnPtpPortSourceInfoDSGmOffsetScaledLogVariancePTPPort Source Information GM OffsetScaledLogVariance.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.4 |
tnPtpPortSourceInfoDSGmPriority1PTPPort Source Information GM Priority1.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.5 |
tnPtpPortSourceInfoDSGmPriority2PTPPort Source Information GM Priority2.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.6 |
tnPtpPortSourceInfoDSStepsRemovedPTPPort Source Information StepsRemoved.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.7 |
tnPtpPortSourceInfoDSReceiverClockIdentityPTPPort Source Information Receiver ClockIdentity.ro AluWdmPtpClockIdentifier .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.8 |
tnPtpPortSourceInfoDSReceiverPortNumberPTPPort Source Information Receiver PortNumber.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.9 |
tnPtpPortSourceInfoDSSenderClockIdentityPTPPort Source Information Sender ClockIdentity.ro AluWdmPtpClockIdentifier .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.10 |
tnPtpPortSourceInfoDSSenderPortNumberPTPPort Source Information Sender PortNumber.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.11 |
tnPtpPortSourceInfoDSTimeSourcePTPPort Source Information TimeSource.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.12 |
tnPtpPortSourceInfoDSTimeScalePTPPort Source Information TimeScale.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.13 |
tnPtpPortSourceInfoDSLocalPriorityPTPPort Source Information LocalPriority.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.14 |
tnVirtualPtpPortTableThis table provides parameters for a Virtual PTP port. SEQUENCE OF TnVirtualPtpPortEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.8 |
tnVirtualPtpPortEntryParameters for a Virtual PTP port. TnVirtualPtpPortEntry .1.3.6.1.4.1.7483.2.2.4.9.1.3.8.1 |
tnVirtualPtpPortGmPriority1Virtual PTPPort grandmasterPriority1.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.8.1.1 |
tnVirtualPtpPortGmPriority2Virtual PTPPort grandmasterPriority2.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.8.1.2 |
tnVirtualPtpPortGmClockAccuracyVirtual PTPPort grandmasterClockAccuracy.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.3.8.1.3 |
tnPtpExtTodIf OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.9.1.4 |
tnPtpExtTodIfTableThis table contains parameters of the external 1PPS/ToD interfaces. SEQUENCE OF TnPtpExtTodIfEntry .1.3.6.1.4.1.7483.2.2.4.9.1.4.1 |
tnPtpExtTodIfEntryAttributes of an external 1PPS&ToD interface. TnPtpExtTodIfEntry .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1 |
tnPtpExtTodIfIndexThe index of the 1pps/ToD interface. It contains the shelf, slot and port number information and is equal to the ifIndex of the ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.1 |
tnPtpExtTodIfDirectionThe direction of the 1PPS&ToD interface. 0: Input (to the node) 1: Output (from the node).rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.2 |
tnPtpExtTodSignalValidThis parameter enables/disables the ToD signal of the 1PPS&ToD interface. true: The ToD signal is enabled. false: The ToD signal is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.3 |
tnPtpExtTodIfPulseFormatThe format for the 1PPS signal of the 1PPS&ToD interface. 0: 1 pulse per second 1: 1 pulse per minute 2: 1 pulse per hour.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.4 |
tnPtpExtTodIfToDFormatThe format for the ToD signal of the 1PPS&ToD interface 0: UBX 1: IRIG-B 2: IRIG-D 3: ITU-T This parameter is valid only when tnPtpExtTodSignalValid is true.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.5 |
tnPtpExtTodIfCableCorrectionThe compensation value of the cable for the 1PPS&ToD interface. Value range: {-100ms, +100ms}. The unit of this attribute shall be ns and the steps of this attribute shall be 1ns.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.6 |
tnPtpExtTodIfAdminStatusThe Admin status of the 1PPS&ToD interface. 0: Disable 1: Enable.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.7 |
tnPtpExtTodIf1ppsStatusThe operational status of the 1PPS signal of the 1PPS&ToD interface. 1: Normal 2: Loss. This parameter is valid only when tnPtpExtTodIfDirection is input.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.8 |
tnPtpExtTodIfToDStatusThe operational status of the ToD signal of the 1PPS&ToD interface. 1: Normal 2: Degraded 3: Do Not used (default) 4: Loss 256: N/A - NotApplicable.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.9 |
tnPtpExtTodIfAdditionalInfoThe additional information for the 1PPS&ToD interface.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.10 |
tnPtpExtCompensationModeThis parameter determines the PTP Compensation mode. It is intended to be managed by the System Operator. 0: precalibrated mode 1: auto mode 2: manual moderw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.11 |
tnPtpExtCompenAutoTestTriggerThis parameter enables/disables Compensation AutoTest true: enabled Compensation AutoTest. false: disabled Compensation AutoTest.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.12 |
tnPtpExtCompenManualValueInThe compensation manual value in for the 1PPS&ToD interface. Value range: {-127ns, +127ns}. The unit of this attribute shall be ns.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.13 |
tnPtpExtCompenManualValueOutThe compensation manual value out for the 1PPS&ToD interface. Value range: {-127ns, +127ns}. The unit of this attribute shall be ns.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.14 |
tnPtpExtCompenMeasureStatusThis parameter indicate the the status of automatical calibration measurement 0: noTrigger 1: inProgress 2: successful 2: failed.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.15 |
tnPtpExtTodIfDegradeThresholdThe Threshold value to raise ToD Degrade(TODDEG). For IEEE_1588_2008_CCSA profile, Range: 0 to 5; Default: 0. For G_8275_1 profile, valid values are 6, 7, 135, 140, 150, 160, 165, 248; Default: 6.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.16 |
tnPtpExtTodIfTodClockClassThe ClockClass of the ToD signal with itu ToD message format type. Valid values are: 0..255: ClockClass 256: N/A - NotApplicable.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.17 |
tnPtpExtTodAlmProfName.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.18 |
tnPtpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.9.2 |
tnPtpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.9.2.1 |
tnPtpSystemGroupPTP system information for the card. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.1 |
tnPtpClockDefaultDSConfigGroupConfigurable information for a PTP clock. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.2 |
tnPtpClockDefaultDSInfoGroupNon-configurable information for a PTP clock. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.3 |
tnPtpClockCurrentDSGroupOperational information for a PTP clock. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.4 |
tnPtpClockParentDSGroupParent clock information for a PTP clock. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.5 |
tnPtpClockTimePropertiesDSGroupTime properties information for a PTP clock. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.6 |
tnPtpPortNextIndexGroupAvailable next index for a PTP port to be created. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.7 |
tnPtpPortDSConfigGroupConfigurable information for a PTP port. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.8 |
tnPtpPortDSInfoGroupNon-configurable information for a PTP port. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.9 |
tnPtpExtTodIfGroupInformation for an external 1PPS&ToD port. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.11 |
tnPtpClockPathTraceDSGroupPath Trace Data Set of a PTP Clock. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.12 |
tnPtpClockSyncOamGroupPTP Clock Sync OAM. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.13 |
tnPtpClockGenericGroupGeneric PTP clock. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.14 |
tnPtpTransparentClockDefaultDSGroupTable for the Default Data Set of Transparent Clock. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.15 |
tnPtpPortGenericGroupGeneric information for a PTP port. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.16 |
tnPtpTransparentClockPortDSGroupTable for the Data Set of Transparent Clock PTP port. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.17 |
tnPtpPortSourceInfoDSGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.18 |
tnVirtualPtpPortGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.1.19 |
tnPtpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.9.2.2 |
tnPtpCompliance. Unknown .1.3.6.1.4.1.7483.2.2.4.9.2.2.1 |