TROPIC-CARD-MIB
AI MIB Summary
The TROPIC-CARD-MIB module provides SNMP-based management and monitoring of hardware card status, operational state, and physical attributes for Tropic Networks (now part of Alcatel-Lucent/Nokia) telecommunications equipment. It exposes critical metrics including card presence, reset status, temperature readings, and port-level statistics to facilitate fault detection and resource utilization tracking within carrier-grade switching or routing platforms.
The card MIB.
Main OID:
tnCardMibModule.1.3.6.1.4.1.7483.1.1.2.2.3.1
104
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
104 total| Object Name |
|---|
tnCardMibModuleThe card MIB. MODULE-IDENTITY .1.3.6.1.4.1.7483.1.1.2.2.3.1 |
tnCardConf OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.3.1.1 |
tnCardGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.3.1.1.1 |
tnCardScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.3.1.1.1.1 |
tnCardTableGroup. Unknown .1.3.6.1.4.1.7483.2.2.3.1.1.1.2 |
tnCardAssemblyTableGroup. Unknown .1.3.6.1.4.1.7483.2.2.3.1.1.1.3 |
tnCardPrbsTestIdTableGroup. Unknown .1.3.6.1.4.1.7483.2.2.3.1.1.1.5 |
tnCardCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.3.1.1.2 |
tnCardCompliance. Unknown .1.3.6.1.4.1.7483.2.2.3.1.1.2.1 |
tnCardObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.3.1.2 |
tnCardBasics OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.3.1.2.1 |
tnCardTotalThe total number of card records allocated on a 1696R/1830 NE.ro Integer32 .1.3.6.1.4.1.7483.2.2.3.1.2.1.1 |
tnCardTable. SEQUENCE OF TnCardEntry .1.3.6.1.4.1.7483.2.2.3.1.2.1.2 |
tnCardEntry. TnCardEntry .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1 |
tnCardName.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.1 |
tnCardDescr.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.2 |
tnCardCLEI.ro TropicCardCLEI (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.3 |
tnCardHFD.ro TropicCardHFD (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.4 |
tnCardSerialNumber.ro TropicCardSerialNumber (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.5 |
tnCardManufacturingPartNumber.ro TropicCardManufacturingPartNumber (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.6 |
tnCardMarketingPartNumber.ro TropicCardMarketingPartNumber (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.7 |
tnCardSWGenericLoadNameThe SW generic load currently active.ro TropicCardSWGenericLoadName (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.8 |
tnCardHeight.ro Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.10 |
tnCardWidth.ro Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.11 |
tnCardTemperatureThe current temperature of the card.ro Integer32 UNITS "Celsius" .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.13 |
tnCardHighTemperatureThreshThe high temperature threshold of the card. Current configurable range: 1696R: -5 to 60 1830: -5 to 90.rw Integer32 UNITS "Celsius" .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.14 |
tnCardLowTemperatureThreshThe low temperature threshold of the card. Current configurable range: 1696R: -5 to 60 1830: -45 to 90.rw Integer32 UNITS "Celsius" .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.15 |
tnCardTemperatureToleranceThe temperature tolerance of the card, applied to the card's high and low temperature thresholds. Current configurable range: 0 to 10.rw Unsigned32 UNITS "Celsius" .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.16 |
tnCardStatusLEDColorThe color of the status LED. For the 1830 PSS-32, not applicable to the DCM and SFD cards.ro TropicLEDColorType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.17 |
tnCardStatusLEDStateThe state of the status LED. For the 1830 PSS-32, not applicable to the DCM and SFD cards.ro TropicLEDStateType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.18 |
tnCardActivityLEDColorThe color of the activity LED. For the 1830 PSS-32, only applicable to the EC card.ro TropicLEDColorType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.19 |
tnCardActivityLEDStateThe state of the activity LED. For the 1830 PSS-32, only applicable to the EC card.ro TropicLEDStateType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.20 |
tnCardCompanyID.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.21 |
tnCardMnemonic.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.22 |
tnCardSWPartNum.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.23 |
tnCardDate.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.24 |
tnCardExtraData.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.25 |
tnCardAnyPortsInService.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.27 |
tnCardLastBootedFwBundleVer.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.28 |
tnCardNextFwBundleVer.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.29 |
tnCardFactoryID.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.30 |
tnCardCapacityThe capacity of the storage medium in the slot.rw AluWdmCardCapacity (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.31 |
tnCardLACPSystemPrioritytnCardLACPSystemPriority is the Link Aggregation Control Protocol (LACP) system priority which is combined with the system MAC address to make up a unique system ID that is used by LACP in communications with LACP peer systems on Link Aggregation (LAG) ports.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.32 |
tnCardMaxPowerP sub 0, P sub 50 and P sub 100 (percent utilization of transmission function) provided for ATIS TEER calculation. These measurements are to be made under the conditions provided in ATIS-0600015-2009: Temperature: 25 deg C +/- 3 deg C (77 deg F +/- 5 deg F) Humidity: Relative humidity between 30% and 75% Barometric Pressure: Between 1020 and 812 mbar. Current range: 0 to 1,000,000.ro Unsigned32 UNITS "milli-Watts" .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.33 |
tnCardEthOamCcmFaultMgntModeThe Ethernet OAM fault management compliancy of the card. Current configurable modes: ieee: IEEE 802.1ag compliant itu: ITU-T G.8021 compliant.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.34 |
tnCardClkSwitchClock Switch on pack level.rw AluWdmWtClkValues (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.35 |
tnCardRtrvClkSwitchRetrieve Clock Selection on pack level.ro AluWdmWtClkValues (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.36 |
tnCardWtClkMeasureValuesRetrieve PF Wt clock measurements.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.37 |
tnCardPowerThe monitored card power consumption valuero Integer32 UNITS "milli-Watts" .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.38 |
tnCardCurrentThe monitored card current valuero Unsigned32 UNITS "milli-Amperes" .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.39 |
tnCardUplinkAdminModeEach card can be configured in one of two administrative modes. In network mode the system uses MPLS-TP to provide service transport, and in access-uplink mode the system uses Ethernet QinQ (802.1ad) switching. NOTE: to change the administrative mode, the mode must be unassigned. To set the mode to unassigned, the slot must first be set to empty then back to the previously configure pack type.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.40 |
tnCardLoopbackNoServPortSecond loopback port used for internal sap creation, which is needed for Mac address swapping. 0 indicates the port is undefined.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.41 |
tnCardAlmProfName.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.42 |
tnCardAlmProfEnvName.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.43 |
tnCardLicenseDataLicense key applied to cardrw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.44 |
tnCardLicenseActionLicense Action moderw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.45 |
tnCardLicenseCap1ValLicense key Cap1 Valuero Unsigned32 .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.46 |
tnCardLicenseCap2ValLicense key Cap2 Valuero Unsigned32 .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.47 |
tnCardLicenseTimeStampLicense key Timestampro Unsigned32 .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.48 |
tnCardLicenseRmaKeyLicense key RMA Keyrw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.49 |
tnCardMirrorLoopbackNoServPortSecond loopback port used for internal sap creationrw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.50 |
tnCardDNRLEDColorDNR LED Colorrw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.51 |
tnCardTestHdNoServPortLoopback port for testheadrw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.52 |
tnCardAmbientTempAmbient temperature on PSI.ro Integer32 UNITS "Celsius" .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.53 |
tnCardRpmReadCard Rpm on PSI.ro Integer32 .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.54 |
tnCardL1andL2DecoupledIndicates whether the port types on L1 and L2 are decoupled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.55 |
tnCardIntWrkModelegacy sets the interworking mode of the card to support legacy applications, while standard sets the interworking mode of the card to support standard OTN applications.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.56 |
tnCardTotalRamDisplay the RAM capacity.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.57 |
tnCardTransportModeOSCTransport Mode OSC to layer 2 and 3.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.58 |
tnCardModuleCfgPluggable module card configuration.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.59 |
tnCardLicenseRestrictedLicense Restricted Card: true - If the card is restricted and has the value of lower nibble of the byte set to 0x2 false - If the card is unrestricted and has the value of lower nibble of the byte set to 0x0 or 0x1.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.60 |
tnCardLineModeCard Line mode: fixed - sets the line mode to support fixed provisioning for changing the line port type/en-coding dynamic - sets the line mode to allow dynamic modification of the line port type/encoding.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.61 |
tnCardInitConfProfileTriggers an initial service setup which includes interface, OTSIG and DXC auto provision by given the corresponding configuration profile ID.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.62 |
tnCardVirtualIndicate if the card is virtual card or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.63 |
tnCardOAMTestUnitThe value of tnCardOAMTestUnit defines the unit of OAM (SLM/DM) test results.ro NokiaOAMTestUnitType .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.64 |
tnCardSlotClkStatus.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.65 |
tnCardClkSelectedValue.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.66 |
tnCardShutdownCmdnormal - user shall set the card state to admin down before. shutdownForce - force allows an user with administrator rights to perform a reset cold without setting the ports and the card to admin down before.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.67 |
tnCardCpuTemperatureThe current temperature of the control card, for example, the 1830 TPS EC.ro Integer32 UNITS "Celsius" .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.68 |
tnCardMainDeviceTemperatureThe current temperature of the main device, for example, the 1830 TPS FPGA.ro Integer32 UNITS "Celsius" .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.69 |
tnCardAseMode.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.70 |
tnCardAddPowerMode.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.71 |
tnCardLOLCKDetectionEnablePTPIOC card uses this attribute to enable/disable Loss of Lock(LOLCK) detection on OTC line ports: true - Enable false - Disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.72 |
tnCardSapLoopbackMacAddrtnCardSapLoopbackMacAddr specifies the unicast source MAC address used with a MAC Swap SAP terminal loopbackrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.73 |
tnCardMgracdIndicates if managed by CP, MGNPLN, shared by both or free.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.74 |
tnCardTargetAddPortInputPower.rw Integer32 UNITS "mBm" .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.75 |
tnCardPassThroughBandwidthUsagePassthrough Bandwidth Usage. For 20p200, range is 0 to 120000.ro Integer32 .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.76 |
tnCardUDCChanType.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.77 |
tnCardUDCStatus.rw Enumeration .1.3.6.1.4.1.7483.2.2.3.1.2.1.2.1.78 |
tnCardAssemblyTable. SEQUENCE OF TnCardAssemblyEntry .1.3.6.1.4.1.7483.2.2.3.1.2.1.3 |
tnCardAssemblyEntry. TnCardAssemblyEntry .1.3.6.1.4.1.7483.2.2.3.1.2.1.3.1 |
tnCardAssemblyIndex. Integer32 .1.3.6.1.4.1.7483.2.2.3.1.2.1.3.1.1 |
tnCardAssemblyName.ro SnmpAdminString .1.3.6.1.4.1.7483.2.2.3.1.2.1.3.1.2 |
tnCardAssemblyCLEI.ro TropicCardCLEI (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.3.1.3 |
tnCardAssemblyHFD.ro TropicCardHFD (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.3.1.4 |
tnCardAssemblySerialNumber.ro TropicCardSerialNumber (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.3.1.5 |
tnCardAssemblyManufacturingPartNumber.ro TropicCardManufacturingPartNumber (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.3.1.6 |
tnCardAssemblyMarketingPartNumber.ro TropicCardMarketingPartNumber (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.3.1.7 |
tnCardDbSyncTable. SEQUENCE OF TnCardDbSyncEntry .1.3.6.1.4.1.7483.2.2.3.1.2.1.5 |
tnCardDbSyncEntryThe entry for tnCardDbSyncTable TnCardDbSyncEntry .1.3.6.1.4.1.7483.2.2.3.1.2.1.5.1 |
tnCardDBSyncEnabledByUserIndicates whether or not the user has enabled DB sync between the LC and the EC. If it is enabled, tnCardDBSyncEnabledByUser shall be true. After the sync, tnCardDBSyncEnabledByUser shall change to false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.3.1.2.1.5.1.1 |
tnCardPrbsTestIdTable. SEQUENCE OF TnCardPrbsTestIdEntry .1.3.6.1.4.1.7483.2.2.3.1.2.1.6 |
tnCardPrbsTestIdEntry. TnCardPrbsTestIdEntry .1.3.6.1.4.1.7483.2.2.3.1.2.1.6.1 |
tnCardPrbsTestIdOidList.ro SnmpAdminString .1.3.6.1.4.1.7483.2.2.3.1.2.1.6.1.1 |