TN-RFC2544-MIB
The TN-RFC2544-MIB enables network devices to execute and monitor RFC 2544 performance test commands, specifically tracking throughput, latency, frame loss, and back-to-back frame metrics during link capacity and stress testing.
Imported Objects
Objects
51 total| Object Name |
|---|
tnRFC2544The MIB provides functionalities for RFC 2544 Performance Test Commands. MODULE-IDENTITY .1.3.6.1.4.1.7483.6.153 |
tnRFC2544ProfileTableThis table is used to maintain the RFC2544 Profile Entries. SEQUENCE OF TnRFC2544ProfileEntry .1.3.6.1.4.1.7483.6.153.1 |
tnRFC2544ProfileEntryEntries in this table correspond to the RFC2544 Profile Entries. TnRFC2544ProfileEntry .1.3.6.1.4.1.7483.6.153.1.1 |
tnRFC2544ProfileDescriptionThe description of this table.rw DisplayString .1.3.6.1.4.1.7483.6.153.1.1.2 |
tnRFC2544ConfigCommonParamTableThis table is used to maintain the RFC2544 Profile Configuration Common Parameters Entries. SEQUENCE OF TnRFC2544ConfigCommonParamEntry .1.3.6.1.4.1.7483.6.153.2 |
tnRFC2544ConfigCommonParamEntryEntries in this table correspond to the RFC2544 Profile Configuration Common Parameters Entries. TnRFC2544ConfigCommonParamEntry .1.3.6.1.4.1.7483.6.153.2.1 |
tnRFC2544ConfigCommonParamNameThe name, ASCII range 33-126, of this table.rw DisplayString .1.3.6.1.4.1.7483.6.153.2.1.1 |
tnRFC2544ConfigCommonParamDescriptionThe description of this table.rw DisplayString .1.3.6.1.4.1.7483.6.153.2.1.2 |
tnRFC2544ConfigCommonParamMEGLevelMEG Level of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.2.1.3 |
tnRFC2544ConfigCommonParamEgressPortEgress Port of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.2.1.4 |
tnRFC2544ConfigCommonParamSequenceNumberCheckSequence Number Check disable/enable of this table.rw Enumeration .1.3.6.1.4.1.7483.6.153.2.1.5 |
tnRFC2544ConfigCommonParamDwellTimeDwell Time, in seconds, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.2.1.6 |
tnRFC2544ConfigCommonParamTypeType of this table.rw Enumeration .1.3.6.1.4.1.7483.6.153.2.1.7 |
tnRFC2544ConfigCommonParamVLANIDVLAN ID of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.2.1.8 |
tnRFC2544ConfigCommonParamPCPPCP of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.2.1.9 |
tnRFC2544ConfigCommonParamDEIDEI of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.2.1.10 |
tnRFC2544ConfigCommonParamDMACThe DMAC, 00-00-00-00-00-00 formatted, of this table.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.6.153.2.1.11 |
tnRFC2544ConfigCommonParamFrameSizeMaskFrame Size Mask of this table.
Bit 0 - 64 byte frames enabled if set to 1.
Bit 1 - 128 byte frames enabled if set to 1.
Bit 2 - 256 byte frames enabled if set to 1.
Bit 3 - 512 byte frames enabled if set to 1.
Bit 4 - 1024 byte frames enabled if set to 1.
Bit 5 - 1280 byte frames enabled if set to 1.
Bit 6 - 1518 byte frames enabled if set to 1.
Bit 7 - 2000 byte frames enabled if set to 1.
Bit 8 - 9600 byte frames enabled if set to 1.rw Bits .1.3.6.1.4.1.7483.6.153.2.1.12 |
tnRFC2544ConfigCommonParamTestsToRunMaskTests To Run Mask of this table.
Bit 0 - Throughput Test enabled if set to 1.
Bit 1 - Latency Test enabled if set to 1.
Bit 2 - Frame Loss Test enabled if set to 1.
Bit 3 - Back To Back Test enabled if set to 1.rw Bits .1.3.6.1.4.1.7483.6.153.2.1.13 |
tnRFC2544ConfigCommonRowStatus- 'noAction', Do nothing.
- 'create', create a profile.
- 'delete', delete a profile.rw Enumeration .1.3.6.1.4.1.7483.6.153.2.1.14 |
tnRFC2544ConfigThroughputTestParamTableThis table is used to maintain the RFC2544 Profile Config Throughput Test Parameters Entries.rw SEQUENCE OF TnRFC2544ConfigThroughputTestParamEntry .1.3.6.1.4.1.7483.6.153.3 |
tnRFC2544ConfigThroughputTestParamEntryEntries in this table correspond to the RFC2544 Profile Config Throughput Test Parameters Entries.rw TnRFC2544ConfigThroughputTestParamEntry .1.3.6.1.4.1.7483.6.153.3.1 |
tnRFC2544ConfigThroughputTestParamTrialDurationTrial Duration, in seconds, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.3.1.1 |
tnRFC2544ConfigThroughputTestParamMinRateMinimum Rate, in permille, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.3.1.2 |
tnRFC2544ConfigThroughputTestParamMaxRateMaximum Rate, in permille, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.3.1.3 |
tnRFC2544ConfigThroughputTestParamAccuracyAccuracy, in permille, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.3.1.4 |
tnRFC2544ConfigThroughputTestParamAllowedFrameLossAllowed Frame Loss, in permille, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.3.1.5 |
tnRFC2544ConfigLatencyTestParamTableThis table is used to maintain the RFC2544 Profile Config Latency Test Parameters Entries. SEQUENCE OF TnRFC2544ConfigLatencyTestParamEntry .1.3.6.1.4.1.7483.6.153.4 |
tnRFC2544ConfigLatencyTestParamEntryEntries in this table correspond to the RFC2544 Profile Config Latency Test Parameters Entries. TnRFC2544ConfigLatencyTestParamEntry .1.3.6.1.4.1.7483.6.153.4.1 |
tnRFC2544ConfigLatencyTestParamTrialDurationTrial Duration, in seconds, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.4.1.1 |
tnRFC2544ConfigLatencyTestParamDelayMeasurementIntervalDelay Measurement Interval, in seconds, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.4.1.2 |
tnRFC2544ConfigLatencyTestParamAllowedFrameLossAllowed Frame Loss, in permille, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.4.1.3 |
tnRFC2544ConfigFrameLossTestParamTableThis table is used to maintain the RFC2544 Profile Config Frame Loss Test Parameters Entries. SEQUENCE OF TnRFC2544ConfigFrameLossTestParamEntry .1.3.6.1.4.1.7483.6.153.5 |
tnRFC2544ConfigFrameLossTestParamEntryEntries in this table correspond to the RFC2544 Profile Config Frame Loss Test Parameters Entries. TnRFC2544ConfigFrameLossTestParamEntry .1.3.6.1.4.1.7483.6.153.5.1 |
tnRFC2544ConfigFrameLossTestParamTrialDurationTrial Duration, in seconds, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.5.1.1 |
tnRFC2544ConfigFrameLossTestParamMinRateMinimum Rate, in permille, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.5.1.2 |
tnRFC2544ConfigFrameLossTestParamMaxRateMaximum Rate, in permille, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.5.1.3 |
tnRFC2544ConfigFrameLossTestParamRateStepRate Step, in permille, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.5.1.4 |
tnRFC2544ConfigBackToBackTestParamTableThis table is used to maintain the RFC2544 Profile Config Back To Back Test Param Entries. SEQUENCE OF TnRFC2544ConfigBackToBackTestParamEntry .1.3.6.1.4.1.7483.6.153.6 |
tnRFC2544ConfigBackToBackTestParamEntryEntries in this table correspond to the RFC2544 Profile Configuration Back To Back Test Parameters Entries. TnRFC2544ConfigBackToBackTestParamEntry .1.3.6.1.4.1.7483.6.153.6.1 |
tnRFC2544ConfigBackToBackTestParamTrialDurationTrial Duration, in seconds, of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.6.1.1 |
tnRFC2544ConfigBackToBackTestParamTrialCountTrial count of this table.rw Integer32 .1.3.6.1.4.1.7483.6.153.6.1.2 |
tnRFC2544ReportTableThis table is used to maintain the RFC2544 Profile Config Back To Back Test Param Entries. SEQUENCE OF TnRFC2544ReportEntry .1.3.6.1.4.1.7483.6.153.7 |
tnRFC2544ReportEntryEntries in this table correspond to the RFC2544 Profile Configuration Back To Back Test Parameters Entries. TnRFC2544ReportEntry .1.3.6.1.4.1.7483.6.153.7.1 |
tnRFC2544ReportNameName of the report.rw DisplayString .1.3.6.1.4.1.7483.6.153.7.1.1 |
tnRFC2544ReportDescrReport description.rw DisplayString .1.3.6.1.4.1.7483.6.153.7.1.2 |
tnRFC2544ProfileNameName of profile.rw DisplayString .1.3.6.1.4.1.7483.6.153.7.1.3 |
tnRFC2544CreateTimeName of profile.rw DisplayString .1.3.6.1.4.1.7483.6.153.7.1.4 |
tnRFC2544ReportStatusReport status.ro Enumeration .1.3.6.1.4.1.7483.6.153.7.1.5 |
tnRFC2544DownloadTFTPServerTFTP server URL on the form tftp://server[:port]/path-to-file
to place the report when a save report is next requested via this MIB.
This value is set to zero length when no address has been
specified. The report name will be used as the filenamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7483.6.153.7.1.6 |
tnRFC2544ReportAction- 'noAction', Do nothing.
- 'createAndRun', create a report and start execution of the test.
- 'cancel', cancel a test that is running.
- 'delete', delete a test.
- 'save', save to a tftp server.rw Enumeration .1.3.6.1.4.1.7483.6.153.7.1.7 |
More MIBs from Vitesse Semiconductor
Browse all Vitesse SemiconductorMIBs →The TROPIC-OPTICALPORT-MIB defines the managed object classes for monitoring and configuring optical transceiver parameters, including signal power levels, laser bias currents, and temperature, on Tropic Networks optical transport equipment. This module enables granular fault detection and performance analysis of physical layer optical interfaces by exposing standardized counters and gauges for link health validation.
The TROPIC-STATISTICS-MIB module monitors network traffic performance and anomaly detection thresholds on Tropic Networks devices by exposing raw packet counters, binned traffic distributions, and Traffic Condition Alarm (TCA) configuration parameters.
The TROPIC-SYSTEM-MIB provides standard SNMP access to Nokia network element system-level attributes, including device identity, uptime, contact information, and operational status. It enables centralized monitoring of core system health metrics such as CPU utilization, memory usage, and interface state transitions across TROPIC-based Nokia infrastructure.
The TROPIC-GENERIC-NOTIFICATION-MIB defines standard SNMP trap and inform PDU structures for Tropic Networks devices, enabling the transmission of critical operational events such as link state transitions, authentication failures, and hardware fault conditions to a management station. This module facilitates real-time alerting for network availability and security incidents by mapping vendor-specific events to generic notification objects within the Tropic ecosystem.
The TROPIC-GLOBAL-REG MIB module facilitates the monitoring and management of registration states, session counts, and subscriber lifecycle events on Nokia TROPIC (T1/T2) access gateways and aggregation platforms. It provides critical visibility into the operational status of user registration processes and associated resource utilization within the Nokia IP/MPLS and mobile backhaul infrastructure.
The TROPIC-PSD-MIB facilitates the monitoring and management of photonic service demarcation points on Tropic Networks optical transport equipment, specifically tracking service status, signal integrity, and interface performance metrics at the network edge.