TN-LOOP-PROTECT-MIB
The TN-LOOP-PROTECT-MIB enables monitoring and management of loop prevention mechanisms on Transition Networks (TN) hardware, specifically tracking the operational state of loop protection protocols and associated interface statuses to detect and mitigate Layer 2 bridging loops.
Imported Objects
Objects
19 total| Object Name |
|---|
tnLoopProtectMIBThe mib module for managing all transition products with Loop protection MODULE-IDENTITY .1.3.6.1.4.1.7483.6.22 |
tnLoopProtectNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.22.0 |
tnLoopProtectLoopDetectedNotificationA tnLoopProtectLoopDetectedNotification signifies
that a loop has been detected by the loop protection protocol.
Additional infomation contains port number ,count of loop detected on the port
and the action will be execute NOTIFICATION-TYPE .1.3.6.1.4.1.7483.6.22.0.1 |
tnLoopProtectObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.22.1 |
tnLoopProtectMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.22.1.1 |
tnLoopProtectBaseTableThis table is used for configuring global loop protect variables SEQUENCE OF TnLoopProtectBaseEntry .1.3.6.1.4.1.7483.6.22.1.1.1 |
tnLoopProtectBaseEntryThis entry contains configuration elements of tnLoopProtectBaseTable TnLoopProtectBaseEntry .1.3.6.1.4.1.7483.6.22.1.1.1.1 |
tnLoopProtectEnableIndicates whether the loop protect is enable on this device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.22.1.1.1.1.1 |
tnLoopProtectTxTimeThe interval in seconds between each loop protection PDU sent on each port.
valid values are 1 to 10 seconds,the default value is 5 seconds.rw INTEGER .1.3.6.1.4.1.7483.6.22.1.1.1.1.2 |
tnLoopProtectShutdownTimeThe period (in seconds) for which a port will be kept disabled in the event of a loop is detected (and the port action shuts down the port).
Valid values are 0 to 604800 seconds (7 days). A value of zero will keep a port disabled (until next device restart).rw INTEGER .1.3.6.1.4.1.7483.6.22.1.1.1.1.3 |
tnLoopProtectPortTableThis table is used for configuring loop protect options for each port SEQUENCE OF TnLoopProtectPortEntry .1.3.6.1.4.1.7483.6.22.1.1.2 |
tnLoopProtectPortEntryThis entry contains configuration element of tnLoopProtectBaseTable TnLoopProtectPortEntry .1.3.6.1.4.1.7483.6.22.1.1.2.1 |
tnLoopProtectPortEnableControls whether loop protection is enabled on this switch port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.22.1.1.2.1.1 |
tnLoopProtectPortActionConfigures the action performed when a loop is detected on a port. Valid values are Shutdown Port(1), Shutdown Port and Log(2) or Log Only(3).rw Enumeration .1.3.6.1.4.1.7483.6.22.1.1.2.1.2 |
tnLoopProtectPortTxModeEnableControls whether the port is actively generating loop protection PDU's, or whether it is just passively looking for looped PDU's.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.22.1.1.2.1.3 |
tnLoopProtectPortLoopCountThe number of loops detected on this port.ro Counter32 .1.3.6.1.4.1.7483.6.22.1.1.2.1.4 |
tnLoopProtectPortStatusThe status of the port.
up(1): the status of the port is up.
down(2):the status of the port is down.
disable(3):loop is detected in this port and shutdown is triggered at the same timero Enumeration .1.3.6.1.4.1.7483.6.22.1.1.2.1.5 |
tnLoopProtectPortLoopDetectedIndicates Whether a loop is currently detected on the port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.22.1.1.2.1.6 |
tnLoopProtectPortLastLoopTimeThe time of the last loop event detected.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7483.6.22.1.1.2.1.7 |
More MIBs from Vitesse Semiconductor
Browse all Vitesse SemiconductorMIBs →The TROPIC-OPTICALPORT-MIB defines the managed object classes for monitoring and configuring optical transceiver parameters, including signal power levels, laser bias currents, and temperature, on Tropic Networks optical transport equipment. This module enables granular fault detection and performance analysis of physical layer optical interfaces by exposing standardized counters and gauges for link health validation.
The TROPIC-STATISTICS-MIB module monitors network traffic performance and anomaly detection thresholds on Tropic Networks devices by exposing raw packet counters, binned traffic distributions, and Traffic Condition Alarm (TCA) configuration parameters.
The TROPIC-SYSTEM-MIB provides standard SNMP access to Nokia network element system-level attributes, including device identity, uptime, contact information, and operational status. It enables centralized monitoring of core system health metrics such as CPU utilization, memory usage, and interface state transitions across TROPIC-based Nokia infrastructure.
The TROPIC-GENERIC-NOTIFICATION-MIB defines standard SNMP trap and inform PDU structures for Tropic Networks devices, enabling the transmission of critical operational events such as link state transitions, authentication failures, and hardware fault conditions to a management station. This module facilitates real-time alerting for network availability and security incidents by mapping vendor-specific events to generic notification objects within the Tropic ecosystem.
The TROPIC-GLOBAL-REG MIB module facilitates the monitoring and management of registration states, session counts, and subscriber lifecycle events on Nokia TROPIC (T1/T2) access gateways and aggregation platforms. It provides critical visibility into the operational status of user registration processes and associated resource utilization within the Nokia IP/MPLS and mobile backhaul infrastructure.
The TROPIC-PSD-MIB facilitates the monitoring and management of photonic service demarcation points on Tropic Networks optical transport equipment, specifically tracking service status, signal integrity, and interface performance metrics at the network edge.