TIMETRA-LLDP-MIB
AI MIB Summary
The TIMETRA-LLDP-MIB enables SNMP-based provisioning and monitoring of Link Layer Discovery Protocol (LLDP) parameters, including neighbor discovery tables, TLV object attributes, and system configuration states, specifically on Alcatel-Lucent (now Nokia) Service Router Operating System (SROS) platforms.
This document is the SNMP MIB module to manage and provision LLDP on the Alcatel-Lucent SROS device.
Copyright 2008-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions.
Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
tmnxLldpMIBModule.1.3.6.1.4.1.6527.1.1.3.59
71
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
71 total| Object Name |
|---|
tmnxLldpMIBModuleThis document is the SNMP MIB module to manage and provision
LLDP on the Alcatel-Lucent SROS device.
Copyright 2008-2011 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.59 |
tmnxLldpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.59 |
tmnxLldpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.59.1 |
tmnxLldpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.59.2 |
tmnxLldpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.59 |
tmnxLldpConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.59.1 |
tmnxLldpTxCreditMaxThe maximum number of consecutive LLDPDUs that can be
transmitted at any time.
The default value for tmnxLldpTxCreditMax object is 5.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.59.1.1 |
tmnxLldpMessageFastTxThe interval at which LLDP frames are transmitted on
behalf of this LLDP agent during fast transmission period
(e.g. when a new neighbor is detected).
The default value for tmnxLldpMessageFastTx object is 1 second.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.59.1.2 |
tmnxLldpMessageFastTxInitThe tmnxLldpMessageFastTxInit specifies the number of PDUs
to transmit during a fast transmission period.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.59.1.3 |
tmnxLldpAdminStatusThe tmnxLldpAdminStatus specifies whether or not LLDP
is operationally 'enabled(1)' on the system, or
'disabled(2).' This is a system-wide configuration and
overrides the individual port admin status.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.59.1.4 |
tmnxLldpPortConfigTableThe table that controls LLDP frame transmission on individual
ports and using particular destination MAC addresses. SEQUENCE OF TmnxLldpPortConfigEntry .1.3.6.1.4.1.6527.3.1.2.59.1.5 |
tmnxLldpPortConfigEntryLLDP configuration information for a particular port and
destination MAC address.
This configuration parameter controls the transmission and
the reception of LLDP frames on those interface/address
combinations whose rows are created in this table.
Rows in this table can only be created for MAC addresses
that can validly be used in association with the type of
interface concerned, as defined by table 8-2.
The contents of this table is persistent across
re-initializations or re-boots. TmnxLldpPortConfigEntry .1.3.6.1.4.1.6527.3.1.2.59.1.5.1 |
tmnxLldpPortCfgDestAddressIndexThe index value used to identify the destination
MAC address associated with this entry. Its value identifies
the row in the tmnxLldpPortConfigTable where the MAC address
can be found. TmnxLldpDestAddressTableIndex .1.3.6.1.4.1.6527.3.1.2.59.1.5.1.1 |
tmnxLldpPortCfgAdminStatusThe administratively desired status of the local LLDP agent.
If the associated tmnxLldpPortCfgAdminStatus object has a
value of 'txOnly(1)', then LLDP agent will transmit LLDP
frames on this port and it will not store any information
about the remote systems connected.
If the associated tmnxLldpPortCfgAdminStatus object has a
value of 'rxOnly(2)', then the LLDP agent will receive,
but it will not transmit LLDP frames on this port.
If the associated tmnxLldpPortCfgAdminStatus object has a
value of 'txAndRx(3)', then the LLDP agent will transmit
and receive LLDP frames on this port.
If the associated tmnxLldpPortCfgAdminStatus object has a
value of 'disabled(4)', then LLDP agent will not transmit or
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
other tables, before the port's tmnxLldpPortCfgAdminStatus
becomes disabled, then the information will naturally age out.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.59.1.5.1.2 |
tmnxLldpPortCfgNotifyEnableThe tmnxLldpPortCfgNotifyEnable controls, on a per
port basis, whether or not notifications from the agent
are enabled. The value true(1) means that notifications are
enabled; the value false(2) means that they are not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.59.1.5.1.3 |
tmnxLldpPortCfgTLVsTxEnableThe tmnxLldpPortCfgTLVsTxEnable, defined as a bitmap,
includes the basic set of LLDP TLVs whose transmission is
allowed on the local LLDP agent by the network management.
Each bit in the bitmap corresponds to a TLV type associated
with a specific optional TLV.
It should be noted that the organizationally-specific TLVs
are excluded from the tmnxLldpPortCfgTLVsTxEnable bitmap.
LLDP Organization Specific Information Extension MIBs should
have similar configuration object to control transmission
of their organizationally defined TLVs.
The bit 'portDesc(0)' indicates that LLDP agent should
transmit 'Port Description TLV'.
The bit 'sysName(1)' indicates that LLDP agent should transmit
'System Name TLV'.
The bit 'sysDesc(2)' indicates that LLDP agent should transmit
'System Description TLV'.
The bit 'sysCap(3)' indicates that LLDP agent should transmit
'System Capabilities TLV'.
There is no bit reserved for the management address TLV type
since transmission of management address TLVs are controlled
by another object.
The default value for tmnxLldpPortCfgTLVsTxEnable object is
empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw Bits .1.3.6.1.4.1.6527.3.1.2.59.1.5.1.4 |
tmnxLldpConfigManAddrPortsTableThe table that controls selection of LLDP management address
TLV instances to be transmitted on individual ports. SEQUENCE OF TmnxLldpConfigManAddrPortsEntry .1.3.6.1.4.1.6527.3.1.2.59.1.6 |
tmnxLldpConfigManAddrPortsEntryLLDP configuration information that specifies the set of ports
on which the local system management address instance will be
transmitted.
This configuration object joins the tmnxLldpPortConfigTable and the
lldpLocManAddrTable. An entry exists for each Port/Management
address in the system. Rows are auto-created by the system when
ports are provisioned. TmnxLldpConfigManAddrPortsEntry .1.3.6.1.4.1.6527.3.1.2.59.1.6.1 |
tmnxLldpPortCfgAddressIndexThe tmnxLldpPortCfgAddressIndex represents the system man address associated
with a particular row in the tmnxLldpConfigManAddrPortsTable. TmnxLldpManAddressIndex .1.3.6.1.4.1.6527.3.1.2.59.1.6.1.1 |
tmnxLldpPortCfgManAddrTxEnabledThe tmnxLldpPortCfgManAddrTxEnabled specifies whether the port and
MAC address will transmit the managment address information.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.59.1.6.1.2 |
tmnxLldpPortCfgManAddrSubtypeThe tmnxLldpPortCfgManAddrSubtype indicates the management address
representation in the tmnxLldpPortCfgManAddress object. The value
of 'other (0)' indicates that no management address is in use.ro AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.6.1.4.1.6527.3.1.2.59.1.6.1.3 |
tmnxLldpPortCfgManAddressThe tmnxLldpPortCfgManAddress indicates the management address
used by the tmnxLldpPortCfgAddressIndex.ro LldpManAddress (LLDP-MIB) .1.3.6.1.4.1.6527.3.1.2.59.1.6.1.4 |
tmnxLldpDestAddressTableThe table that contains the set of MAC addresses used
by LLDP for transmission and reception of LLDPDUs. SEQUENCE OF TmnxLldpDestAddressTableEntry .1.3.6.1.4.1.6527.3.1.2.59.1.7 |
tmnxLldpDestAddressTableEntryDestination MAC address information for LLDP.
This configuration parameter identifies a MAC address
corresponding to a TmnxLldpDestAddressTableIndex value.
Rows in this table are created as necessary, to support
MAC addresses needed by other tables in the MIB that
are indexed by MAC address.
A given row in this table cannot be deleted if the MAC
address table index value is in use in any other table
in the MIB.
The contents of this table is persistent across
re-initializations or re-boots. TmnxLldpDestAddressTableEntry .1.3.6.1.4.1.6527.3.1.2.59.1.7.1 |
tmnxLldpAddressTableIndexThe index value used to identify the destination
MAC address associated with this entry.
The value of this object is used as an index to the
tmnxLldpDestAddressTable. TmnxLldpDestAddressTableIndex .1.3.6.1.4.1.6527.3.1.2.59.1.7.1.1 |
tmnxLldpDestMacAddressThe MAC address associated with this entry.
The octet string identifies an individual or a group
MAC address that is in use by LLDP as a destination
MAC address.
The MAC address is encoded in the octet string in
canonical format (see IEEE Std 802).ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.59.1.7.1.2 |
tmnxLldpStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.59.2 |
tmnxLldpStatsTxPortTableA table containing LLDP transmission statistics for
individual port/destination address combinations.
Entries are not required to exist in
this table while the tmnxLldpPortConfigEntry object is equal to
'disabled(4)'. SEQUENCE OF TmnxLldpStatsTxPortEntry .1.3.6.1.4.1.6527.3.1.2.59.2.1 |
tmnxLldpStatsTxPortEntryLLDP frame transmission statistics for a particular port
and destination MAC address.
The port must be contained in the same chassis as the
LLDP agent.
All counter values in a particular entry shall be
maintained on a continuing basis and shall not be deleted
upon expiration of rx Info TTL timing counters in the LLDP
remote systems MIB of the receipt of a shutdown frame from
a remote LLDP agent.
All statistical counters associated with a particular
port on the local LLDP agent become frozen whenever the
admin status is disabled for the same port.
Rows in this table can only be created for MAC addresses
that can validly be used in association with the type of
interface concerned, as defined by table 8-2.
The contents of this table is persistent across
re-initializations or re-boots. TmnxLldpStatsTxPortEntry .1.3.6.1.4.1.6527.3.1.2.59.2.1.1 |
tmnxLldpStatsTxDestMACAddressThe index value used to identify the destination
MAC address associated with this entry. Its value identifies
the row in the tmnxLldpPortConfigTable where the MAC address
can be found.
The value of this object is used as an index to the
tmnxLldpStatsTxPortTable. TmnxLldpDestAddressTableIndex .1.3.6.1.4.1.6527.3.1.2.59.2.1.1.1 |
tmnxLldpStatsTxPortFramesThe number of LLDP frames transmitted by this LLDP agent
on the indicated port.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.59.2.1.1.2 |
tmnxLldpStatsTxLLDPDULengthErrsThe number of LLDPD Length Errors recorded for the Port.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.59.2.1.1.3 |
tmnxLldpStatsRxPortTableA table containing LLDP reception statistics for individual
ports and destination MAC addresses.
Entries are not required to exist in this table while
the tmnxLldpPortCfgAdminStatus object is equal to 'disabled(4)'. SEQUENCE OF TmnxLldpStatsRxPortEntry .1.3.6.1.4.1.6527.3.1.2.59.2.2 |
tmnxLldpStatsRxPortEntryLLDP frame reception statistics for a particular port.
The port must be contained in the same chassis as the
LLDP agent.
All counter values in a particular entry shall be
maintained on a continuing basis and shall not be deleted
upon expiration of rx Info TTL timing counters in the LLDP
remote systems MIB of the receipt of a shutdown frame from
a remote LLDP agent.
All statistical counters associated with a particular
port on the local LLDP agent become frozen whenever the
admin status is disabled for the same port.
Rows in this table can only be created for MAC addresses
that can validly be used in association with the type of
interface concerned, as defined by table 8-2.
The contents of this table is persistent across
re-initializations or re-boots. TmnxLldpStatsRxPortEntry .1.3.6.1.4.1.6527.3.1.2.59.2.2.1 |
tmnxLldpStatsRxDestMACAddressThe index value used to identify the destination
MAC address associated with this entry. Its value identifies
the row in the tmnxLldpStatsRxPortTable where the MAC address
can be found. TmnxLldpDestAddressTableIndex .1.3.6.1.4.1.6527.3.1.2.59.2.2.1.1 |
tmnxLldpStatsRxPortFrameDiscardThe number of LLDP frames received by this LLDP agent on
the indicated port, and then discarded for any reason.
This counter can provide an indication that LLDP header
formating problems may exist with the local LLDP agent in
the sending system or that LLDPDU validation problems may
exist with the local LLDP agent in the receiving system.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.59.2.2.1.2 |
tmnxLldpStatsRxPortFrameErrsThe number of invalid LLDP frames received by this LLDP
agent on the indicated port, while this LLDP agent is enabled.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.59.2.2.1.3 |
tmnxLldpStatsRxPortFramesThe number of valid LLDP frames received by this LLDP agent
on the indicated port, while this LLDP agent is enabled.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.59.2.2.1.4 |
tmnxLldpStatsRxPortTLVDiscardThe number of LLDP TLVs discarded for any reason by this LLDP
agent on the indicated port.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.59.2.2.1.5 |
tmnxLldpStatsRxPortTLVUnknownThe number of LLDP TLVs received on the given port that
are not recognized by this LLDP agent on the indicated port.
An unrecognized TLV is referred to as the TLV whose type value
is in the range of reserved TLV types (000 1001 - 111 1110)
in Table 9.1 of IEEE Std 802.1AB-2004. An unrecognized
TLV may be a basic management TLV from a later LLDP version.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.59.2.2.1.6 |
tmnxLldpStatsRxPortAgeoutsThe counter that represents the number of age-outs that
occurred on a given port. An age-out is the number of
times the complete set of information advertised by a
particular MSAP has been deleted from tables contained in
tmnxLldpRemoteSystemsData and lldpExtensions objects because
the information timeliness interval has expired.
This counter is similar to lldpStatsRemTablesAgeouts, except
that the counter is on a per port basis. This enables NMS to
poll tables associated with the tmnxLldpRemoteSystemsData objects
and all LLDP extension objects associated with remote systems
on the indicated port only.
This counter should be set to zero during agent initialization
and its value should not be saved in non-volatile storage.
When a port's admin status changes from 'disabled' to
'rxOnly', 'txOnly' or 'txAndRx', the counter associated with
the same port should reset to 0. The agent should also flush
all remote system information associated with the same port.
This counter should be incremented only once when the
complete set of information is invalidated (aged out) from
all related tables on a particular port. Partial ageing
is not allowed, and thus, should not change the value of
this counter.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.6527.3.1.2.59.2.2.1.7 |
tmnxLldpLocalSystemData OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.59.3 |
tmnxLldpLocPortTableThis table contains one or more rows, per port and
destination MAC address, of information
associated with the local system known to this agent. SEQUENCE OF TmnxLldpLocPortEntry .1.3.6.1.4.1.6527.3.1.2.59.3.1 |
tmnxLldpLocPortEntryInformation about a particular port component.
Entries may be created and deleted in this table by the
agent.
Rows in this table can only be created for MAC addresses
that can validly be used in association with the type of
interface concerned, as defined by table 8-2.
The contents of this table is persistent across
re-initializations or re-boots. TmnxLldpLocPortEntry .1.3.6.1.4.1.6527.3.1.2.59.3.1.1 |
tmnxLldpLocPortDestMACAddressThe index value used to identify the destination
MAC address associated with this entry. Its value identifies
the row in the tmnxLldpLocPortTable where the MAC address
can be found. TmnxLldpDestAddressTableIndex .1.3.6.1.4.1.6527.3.1.2.59.3.1.1.1 |
tmnxLldpLocPortIdSubtypeThe type of port identifier encoding used in the associated
'lldpLocPortId' object.ro LldpPortIdSubtype (LLDP-MIB) .1.3.6.1.4.1.6527.3.1.2.59.3.1.1.2 |
tmnxLldpLocPortIdThe string value used to identify the port component
associated with a given port in the local system.ro LldpPortId (LLDP-MIB) .1.3.6.1.4.1.6527.3.1.2.59.3.1.1.3 |
tmnxLldpLocPortDescThe string value used to identify the IEEE 802 LAN station's port
description associated with the local system. If the local
agent supports IETF RFC 2863, tmnxLldpLocPortDesc object should
have the same value of ifDescr object.ro SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.59.3.1.1.4 |
tmnxLldpRemoteSystemsData OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.59.4 |
tmnxLldpRemTableThis table contains one or more rows per physical network
connection known to this agent. The agent may wish to ensure
that only one tmnxLldpRemEntry is present for each local port
and destination MAC address,
or it may choose to maintain multiple tmnxLldpRemEntry rows for
the same local port and destination MAC address.
The following procedure may be used to retrieve remote
systems information updates from an LLDP agent:
1. NMS polls all tables associated with remote systems
and keeps a local copy of the information retrieved.
NMS polls periodically the values of the following
objects:
a. lldpStatsRemTablesInserts
b. lldpStatsRemTablesDeletes
c. lldpStatsRemTablesDrops
d. lldpStatsRemTablesAgeouts
e. tmnxLldpStatsRxPortAgeouts for all ports.
2. LLDP agent updates remote systems MIB objects, and
sends out notifications to a list of notification
destinations.
3. NMS receives the notifications and compares the new
values of objects listed in step 1.
Periodically, NMS should poll the object
lldpStatsRemTablesLastChangeTime to find out if anything
has changed since the last poll. if something has
changed, NMS will poll the objects listed in step 1 to
figure out what kind of changes occurred in the tables.
if value of lldpStatsRemTablesInserts has changed,
then NMS will walk all tables by employing TimeFilter
with the last-polled time value. This request will
return new objects or objects whose values are updated
since the last poll.
if value of lldpStatsRemTablesAgeouts has changed,
then NMS will walk the tmnxLldpStatsRxPortAgeouts and
compare the new values with previously recorded ones.
For ports whose tmnxLldpStatsRxPortAgeouts value is
greater than the recorded value, NMS will have to
retrieve objects associated with those ports from
table(s) without employing a TimeFilter (which is
performed by specifying 0 for the TimeFilter.)
lldpStatsRemTablesDeletes and lldpStatsRemTablesDrops
objects are provided for informational purposes. SEQUENCE OF TmnxLldpRemEntry .1.3.6.1.4.1.6527.3.1.2.59.4.1 |
tmnxLldpRemEntryInformation about a particular physical network connection.
Entries may be created and deleted in this table by the agent,
if a physical topology discovery process is active.
Rows in this table can only be created for MAC addresses
that can validly be used in association with the type of
interface concerned, as defined by table 8-2.
The contents of this table is persistent across
re-initializations or re-boots. TmnxLldpRemEntry .1.3.6.1.4.1.6527.3.1.2.59.4.1.1 |
tmnxLldpRemTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 4502 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works. TimeFilter (RMON2-MIB) .1.3.6.1.4.1.6527.3.1.2.59.4.1.1.1 |
tmnxLldpRemLocalDestMACAddressThe index value used to identify the destination
MAC address associated with this entry. Its value identifies
the row in the tmnxLldpRemTable where the MAC address
can be found. TmnxLldpDestAddressTableIndex .1.3.6.1.4.1.6527.3.1.2.59.4.1.1.2 |
tmnxLldpRemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the tmnxLldpRemIndex
will wrap between reboots. Integer32 .1.3.6.1.4.1.6527.3.1.2.59.4.1.1.3 |
tmnxLldpRemChassisIdSubtypeThe type of encoding used to identify the chassis associated
with the remote system.ro LldpChassisIdSubtype (LLDP-MIB) .1.3.6.1.4.1.6527.3.1.2.59.4.1.1.4 |
tmnxLldpRemChassisIdThe string value used to identify the chassis component
associated with the remote system.ro LldpChassisId (LLDP-MIB) .1.3.6.1.4.1.6527.3.1.2.59.4.1.1.5 |
tmnxLldpRemPortIdSubtypeThe type of port identifier encoding used in the associated
'lldpRemPortId' object.ro LldpPortIdSubtype (LLDP-MIB) .1.3.6.1.4.1.6527.3.1.2.59.4.1.1.6 |
tmnxLldpRemPortIdThe string value used to identify the port component
associated with the remote system.ro LldpPortId (LLDP-MIB) .1.3.6.1.4.1.6527.3.1.2.59.4.1.1.7 |
tmnxLldpRemPortDescThe string value used to identify the description of
the given port associated with the remote system.ro SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.59.4.1.1.8 |
tmnxLldpRemSysNameThe string value used to identify the system name of the
remote system.ro SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.59.4.1.1.9 |
tmnxLldpRemSysDescThe string value used to identify the system description
of the remote system.ro SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.59.4.1.1.10 |
tmnxLldpRemSysCapSupportedThe bitmap value used to identify which system capabilities
are supported on the remote system.ro LldpSystemCapabilitiesMap (LLDP-MIB) .1.3.6.1.4.1.6527.3.1.2.59.4.1.1.11 |
tmnxLldpRemSysCapEnabledThe bitmap value used to identify which system capabilities
are enabled on the remote system.ro LldpSystemCapabilitiesMap (LLDP-MIB) .1.3.6.1.4.1.6527.3.1.2.59.4.1.1.12 |
tmnxLldpRemManAddrTableThis table contains one or more rows per management address
information on the remote system learned on a particular port
contained in the local chassis known to this agent. SEQUENCE OF TmnxLldpRemManAddrEntry .1.3.6.1.4.1.6527.3.1.2.59.4.2 |
tmnxLldpRemManAddrEntryManagement address information about a particular chassis
component. There may be multiple management addresses
configured on the remote system identified by a particular
tmnxLldpRemIndex whose information is received on
ifIndex and tmnxLldpRemLocalDestMACAddress of the local system.
Each management address should have distinct 'management address
type' (tmnxLldpRemManAddrSubtype) and 'management address'
(tmnxLldpRemManAddr.)
Entries may be created and deleted in this table by the
agent. TmnxLldpRemManAddrEntry .1.3.6.1.4.1.6527.3.1.2.59.4.2.1 |
tmnxLldpRemManAddrSubtypeThe type of management address identifier encoding used in
the associated 'lldpRemManagmentAddr' object. AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.6.1.4.1.6527.3.1.2.59.4.2.1.1 |
tmnxLldpRemManAddrThe string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity. LldpManAddress (LLDP-MIB) .1.3.6.1.4.1.6527.3.1.2.59.4.2.1.2 |
tmnxLldpRemManAddrIfSubtypeThe enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the remote system.ro LldpManAddrIfSubtype (LLDP-MIB) .1.3.6.1.4.1.6527.3.1.2.59.4.2.1.3 |
tmnxLldpRemManAddrIfIdThe integer value used to identify the interface number
regarding the management address component associated with
the remote system.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.59.4.2.1.4 |
tmnxLldpRemManAddrOIDThe OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the remote system agent.ro OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.59.4.2.1.5 |
tmnxLldpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.59 |