TIMETRA-ETH-RING-MIB
AI MIB Summary
The TIMETRA-ETH-RING-MIB enables SNMP-based provisioning and monitoring of Ethernet Ring Protection Switching (ERPS) components, including ring topology status, node roles, and protection state transitions, specifically on Alcatel-Lucent (now Nokia) SR OS platforms.
This document is the SNMP MIB module to manage and provision the Ethernet Ring components of the Alcatel-Lucent SROS device.
Copyright (c) 2009-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions.
Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraEthRingMIBModule.1.3.6.1.4.1.6527.1.1.3.72
28
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
timetraEthRingMIBModuleThis document is the SNMP MIB module to manage and provision the
Ethernet Ring components of the Alcatel-Lucent SROS device.
Copyright (c) 2009-2011 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.72 |
tmnxEthRingConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.72 |
tmnxEthRingCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.72.1 |
tmnxEthRingGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.72.2 |
tmnxEthRingObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.72 |
tmnxEthRingConfigTimeStamps OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.72.0 |
tmnxEthRingCfgTblLastChangedThe tmnxEthRingCfgTblLastChanged indicates the time, since system
startup, when a row in the tmnxEthRingConfigTable last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.72.0.1 |
tmnxEthRingConfigurations OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.72.1 |
tmnxEthRingConfigTableThe tmnxEthRingConfigTable consists of the Ethernet Ring
configuration information. SEQUENCE OF TmnxEthRingConfigEntry .1.3.6.1.4.1.6527.3.1.2.72.1.1 |
tmnxEthRingConfigEntryThe tmnxEthRingConfigEntry contains information pertaining to an
individual Ethernet Ring.
Rows in this table are created and destroyed using the
tmnxEthRingRowStatus object. TmnxEthRingConfigEntry .1.3.6.1.4.1.6527.3.1.2.72.1.1.1 |
tmnxEthRingIndexThe value of tmnxEthRingIndex specifies the row index of the Ethernet
Ring Group. TmnxEthRingIndex .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.1 |
tmnxEthRingRowStatusThe value of tmnxEthRingRowStatus controls the creation and deletion of
row entries in the tmnxEthRingConfigTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.2 |
tmnxEthRingTimeStampThe value of tmnxEthRingTimeStamp indicates the time, since system
startup, of the last change to this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.3 |
tmnxEthRingDescriptionThe value of tmnxEthRingDescription specifies the user supplied
description of the Ethernet Ring.rw TItemDescription -- TItemLongDescription? .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.4 |
tmnxEthRingAdminStateThe value of tmnxEthRingAdminState specifies the administrative state
of the Ethernet Ring.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.5 |
tmnxEthRingOperStateThe value of tmnxEthRingOperState indicates the operational state of
the Ethernet Ring.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.6 |
tmnxEthRingGuardTimeThe value of tmnxEthRingGuardTime specifies the guard timer, in
deciseconds, of a Ring-APS (R-APS) node.
The guard timer is used to prevent the Ethernet Ring node from acting
upon outdated R-APS messages and prevent the possibility of forming a
closed loop.
While the guard timer is running, any received R-APS Request/State and
Status information is blocked and not forwarded to the Priority Logic.
When the guard timer is not running, the R-APS Request/State and
Status information is forwarded unchanged.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.7 |
tmnxEthRingRevertTimeThe value of tmnxEthRingRevertTime specifies the Wait-To-Restore (WTR)
timer, in seconds, of a Ring-APS (R-APS) node.
The WTR timer is used to prevent frequent operation of the protection
switching due to intermittent signal failure defects.
Setting tmnxEthRingRevertTime to the value zero (0) puts the Ethernet
Ring into a non-revertive mode.rw Unsigned32 (0 | 60..720) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.8 |
tmnxEthRingRevertTimeCountDnThe value of tmnxEthRingRevertTimeCountDn indicates the remaining time,
in seconds, before the Ethernet Ring can revert to its original state.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.9 |
tmnxEthRingCcmHoldDownTimeThe value of tmnxEthRingCcmHoldDownTime specifies the time, in
centiseconds, used for the hold-timer for associated Continuity Check
(CC) Session down event dampening. This guards against reporting
excessive path operational state transitions.
This is implemented by not advertising subsequent transitions of the
CC state to the Ethernet Ring Node until the configured timer has
expired.
A value of zero (0) specifies that a down transition is reported
immediately.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.10 |
tmnxEthRingCcmHoldUpTimeThe value of tmnxEthRingCcmHoldUpTime specifies the time, in
deciseconds, used for the hold-timer for associated Continuity Check
(CC) Session up event dampening. This guards against reporting
excessive path operational state transitions.
This is implemented by not advertising subsequent transitions of the
CC state to the Ethernet Ring Node until the configured timer has
expired.
A value of zero (0) specifies that an up transition is reported
immediately.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.11 |
tmnxEthRingRplNodeThe value of tmnxEthRingRplNode specifies the Ring Protection Link
(RPL) type of the Ethernet Ring Node.rw TmnxEthRingRplNodeType .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.12 |
tmnxEthRingNodeIdThe value of tmnxEthRingNodeId specifies the Ethernet Ring Node ID.
The default value is the system's MAC address.
Writing the MAC address value 00:00:00:00:00:00 to tmnxEthRingNodeId
will reset its value to the system's MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.13 |
tmnxEthRingTxApsPduThe value of tmnxEthRingTxApsPdu indicates the contents of the R-APS
PDU transmitted on the Ethernet Ring.ro TmnxEthRingApsInfoType .1.3.6.1.4.1.6527.3.1.2.72.1.1.1.14 |
tmnxEthRingStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.72.2 |
tmnxEthRingNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.72 |
tmnxEthRingNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.72.0 |
tmnxEthRingDefectStatusThe value of tmnxEthRingDefectStatus indicates what defects are
active on the Ethernet Ring.
The defects are defined as:
dFopPM
::= { tmnxEthRingConfigEntry 15 }
tmnxEthRingSubRingType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
virtualLink (1),
nonVirtualLink (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTIONro Bits .tmnxEthRingV9v0Groups.3 |