TIMESTEP-MIB
TIMESTEP-MIB provides SNMP access to local system information for Newbridge Permit IPSEC gateways, enabling monitoring of device status, interface states, and IPsec tunnel parameters. This module facilitates the tracking of security gateway health and configuration data essential for maintaining secure network connectivity.
Imported Objects
Objects
20 total| Object Name |
|---|
timestepThe MIB module to describe local system information of the Newbridge Permit family of IPSEC Gates. MODULE-IDENTITY .1.3.6.1.4.1.1022 |
permitGate OBJECT IDENTIFIER .1.3.6.1.4.1.1022.9 |
permitGateSerialNumberThe device serial number.ro OCTET STRING .1.3.6.1.4.1.1022.9.1 |
permitGateCpuUtilInstThe instantaneous CPU utilization.ro INTEGER .1.3.6.1.4.1.1022.9.2 |
permitGateCpuUtilAvg1MinThe one minute average of CPU utilization.ro INTEGER .1.3.6.1.4.1.1022.9.3 |
permitGateCpuUtilAvg5MinThe five minutes average of CPU utilization.ro INTEGER .1.3.6.1.4.1.1022.9.4 |
permitGateLastConfigModifTimeTime since boot that the last configuration modification occured. If the configuration has not changed, then the value is 0.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.1022.9.5 |
permitGateTotalRebootNumThe number of times the machine has been rebooted.ro Counter32 .1.3.6.1.4.1.1022.9.6 |
permitGateTotalVolMemoryThe total amount of volatile memory on the device in bytes.ro Integer32 .1.3.6.1.4.1.1022.9.7 |
permitGateFreeVolMemoryThe total amount of free volatile memory on the device in bytes.ro Integer32 .1.3.6.1.4.1.1022.9.8 |
permitGateEncDevStatusThe encryption device status.ro Enumeration .1.3.6.1.4.1.1022.9.9 |
permitGateRandNumGenStatusThe random number generator status.ro Enumeration .1.3.6.1.4.1.1022.9.10 |
permitGateCertExpDateThe device's certificate expiration date.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.1022.9.11 |
permitGateIfArpTableThe (conceptual) table containing information about the Permit/Gate interface entries SEQUENCE OF PermitGateIfArpEntry .1.3.6.1.4.1.1022.9.12 |
permitGateIfArpEntryAn entry (conceptual row) containing on a particuliar Permit/Gate interface PermitGateIfArpEntry .1.3.6.1.4.1.1022.9.12.1 |
permitGateIfArpIndexA unique value, greater than zero for each interface.ro Integer32 .1.3.6.1.4.1.1022.9.12.1.1 |
permitGateIfArpInPktsArp protocol input packet countro Counter32 .1.3.6.1.4.1.1022.9.12.1.2 |
permitGateIfArpOutPktsArp protocol output packet countro Counter32 .1.3.6.1.4.1.1022.9.12.1.3 |
permitGateIfArpInOctetsArp protocol input octet countro Counter32 .1.3.6.1.4.1.1022.9.12.1.4 |
permitGateIfArpOutOctetsArp protocol output octet countro Counter32 .1.3.6.1.4.1.1022.9.12.1.5 |
More MIBs from Newbridge
Browse all NewbridgeMIBs →The NNCEXTCALLROUTINGSTATS-MIB monitors performance and fault metrics for ATM PNNI and static routing on Nortel (now Avaya) NNCE (Network Node Control Element) hardware, specifically tracking call setup success rates, crankback events, DTL generation, and bandwidth allocation failures across non-border and border nodes. It provides granular, interval-based counters for routing table descriptors to distinguish between originating, transiting, and terminating call states, enabling the detection of routing loops, CAC failures, and re-routing efficiency within the PNNI domain.
The NNCFRINTSTATISTICS-MIB module enables performance monitoring of Frame Relay stream traffic on Cisco devices by exposing interface-level counters for data transmission, reception, and error statistics. This MIB facilitates the tracking of Frame Relay-specific metrics such as CIR, FECN, BECN, and discard counts to assess link health and throughput efficiency.
SNMP MIB module
SNMP MIB module
The NNCEXTSVCSIGSTATS-MIB module provides performance monitoring counters for Asynchronous Transfer Mode (ATM) Switched Virtual Circuit (SVC) signaling functions, specifically tracking the establishment, maintenance, and teardown of signaling sessions within Cisco's Network Control and Management Environment (NCME). It enables administrators to quantify signaling traffic volume, error rates, and session state transitions to diagnose connectivity issues and validate SVC provisioning on ATM-based network infrastructure.
The NNC-ATM-STATISTICS-MIB enables performance monitoring of Asynchronous Transfer Mode (ATM) Virtual Path Links (VPL), Virtual Channel Links (VCL), and Virtual Path Aggregations (VPA) by tracking cell counts, OAM cell statistics, and error metrics across 15-minute and 1-hour historical intervals. This module facilitates granular traffic analysis and fault detection on ATM hardware by providing current and interval-based counters for valid, admitted, and idle cells aligned to wall-clock time boundaries.