NNC-ATM-STATISTICS-MIB
AI MIB Summary
The NNC-ATM-STATISTICS-MIB enables performance monitoring of Asynchronous Transfer Mode (ATM) Virtual Path Links (VPL), Virtual Channel Links (VCL), and Virtual Path Aggregations (VPA) by tracking cell counts, OAM cell statistics, and error metrics across 15-minute and 1-hour historical intervals. This module facilitates granular traffic analysis and fault detection on ATM hardware by providing current and interval-based counters for valid, admitted, and idle cells aligned to wall-clock time boundaries.
This module contains definitions for performance monitoring of the ATM layer and it's circuits.
This MIB module contains the following tables: ATM VPL 15 Minute Current Table ATM VPL 15 Minute Interval Table ATM VPL 1 Hour Current Table ATM VPL 1 Hour Interval Table ATM VPL Stat Table ATM VPL Stat Counter Table
ATM VCL 15 Minute Current Table ATM VCL 15 Minute Interval Table ATM VCL 1 Hour Current Table ATM VCL 1 Hour Interval Table ATM VCL Stat Table ATM VCL Stat Counter Table
nncDepthOfHistoricalStrata
These tables are heavily influenced by the definition of VPL/VCL described in rfc1695, and by the statistic table definitions described for Sonet in rfc1595. The number of intervals supported is dependent upon resource availibility on any given product, but should nominally be 32. To avoid building in massive amounts of storage, some products may adopt a bulk collection scheme.
Intervals:
Statistics on the performance of VPL/VCLs are collected over a historical stratum of up to a maximum of M intervals. The value of M is a function of a product's storage capability.
The intervals can be either 15 minutes or 1 hour and are aligned to the quarter or one hour, respectively, of a wall clock. The current interval spans back to the last 15 minute or 1 hour tick on the wall clock. Continuing along the timeline from that point is the most recently completed interval and has an index of 1. The previous interval has an index of 2 and so on. Note that the oldest interval may be incomplete since the statistic collection may have been enabled offset to the quarter or one hour tick.
t 0 -1i -2i -3i ===========|===========|===========|===========|=========== current N = 1 N = 2 N = 3 N = 4 ... N = M interval
Counters:
The following is understood for each counter in this MIB:
- OAM cells are included in counts
- idle and unassigned cells are not counted
- valid cells are those that have passed HEC and have assigned VPI/VCI
- admitted cells have a connection
This module also contains definitions for performance monitoring of Virtual Path Aggregation (VPA) - also known as VCC to VPC Traffic Aggregation - and implemented as Shaped Trunk Group. Only egress VPA statistics are provided.
The following tables have been added : ATM VPA Short (15 minutes) Current Table ATM VPA Short (15 Minutes) Interval Table ATM VPA Long (1 Hour) Current Table ATM VPA Long (1 Hour) Interval Table
Intervals:
two 15-minute intervals are provided : current and previous two 1-hour intervals are provided : current and previous.
Main OID:
nncAtmStatistics.1.3.6.1.4.1.123.3.29
157
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
157 total| Object Name |
|---|
nncAtmStatisticsThis module contains definitions for performance monitoring of the
ATM layer and it's circuits.
This MIB module contains the following tables:
ATM VPL 15 Minute Current Table
ATM VPL 15 Minute Interval Table
ATM VPL 1 Hour Current Table
ATM VPL 1 Hour Interval Table
ATM VPL Stat Table
ATM VPL Stat Counter Table
ATM VCL 15 Minute Current Table
ATM VCL 15 Minute Interval Table
ATM VCL 1 Hour Current Table
ATM VCL 1 Hour Interval Table
ATM VCL Stat Table
ATM VCL Stat Counter Table
nncDepthOfHistoricalStrata
These tables are heavily influenced by the definition of VPL/VCL
described in rfc1695, and by the statistic table definitions described
for Sonet in rfc1595. The number of intervals supported is dependent
upon resource availibility on any given product, but should nominally
be 32. To avoid building in massive amounts of storage, some products
may adopt a bulk collection scheme.
Intervals:
Statistics on the performance of VPL/VCLs are collected over a
historical stratum of up to a maximum of M intervals. The value of M
is a function of a product's storage capability.
The intervals can be either 15 minutes or 1 hour and are aligned to
the quarter or one hour, respectively, of a wall clock. The current
interval spans back to the last 15 minute or 1 hour tick on the wall
clock. Continuing along the timeline from that point is the most
recently completed interval and has an index of 1. The previous
interval has an index of 2 and so on. Note that the oldest interval
may be incomplete since the statistic collection may have been
enabled offset to the quarter or one hour tick.
t
0 -1i -2i -3i
===========|===========|===========|===========|===========
current N = 1 N = 2 N = 3 N = 4 ... N = M
interval
Counters:
The following is understood for each counter in this MIB:
- OAM cells are included in counts
- idle and unassigned cells are not counted
- valid cells are those that have passed HEC and have assigned VPI/VCI
- admitted cells have a connection
This module also contains definitions for performance monitoring of
Virtual Path Aggregation (VPA) - also known as VCC to VPC Traffic
Aggregation - and implemented as Shaped Trunk Group.
Only egress VPA statistics are provided.
The following tables have been added :
ATM VPA Short (15 minutes) Current Table
ATM VPA Short (15 Minutes) Interval Table
ATM VPA Long (1 Hour) Current Table
ATM VPA Long (1 Hour) Interval Table
Intervals:
two 15-minute intervals are provided : current and previous
two 1-hour intervals are provided : current and previous. MODULE-IDENTITY .1.3.6.1.4.1.123.3.29 |
nncAtmStatisticsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.29.1 |
nncVpl15MinCurrentTableThe nncVpl15MinCurrentTable contains
objects for monitoring the performance of a
VPL during the current 15 minute interval. SEQUENCE OF NncVpl15MinCurrentEntry .1.3.6.1.4.1.123.3.29.1.1 |
nncVpl15MinCurrentEntryAn entry in the 15 minute current
statistics table. Each conceptual row
contains current statistics for a
particular VPL. NncVpl15MinCurrentEntry .1.3.6.1.4.1.123.3.29.1.1.1 |
nncVpl15MinCurrentStateThe state of the current interval. The
object provides a status for those entries
which have been reset by the user, or have
been subject to a wall clock time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.1.1.1 |
nncVpl15MinCurrentAbsoluteIntervalNumberThe absolute interval number of this
interval.ro NncExtAbsIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.1.1.2 |
nncVpl15MinCurrentClp0And1InCellsNumber of valid cells admitted at ingress
on the VPL with CLP=0 or 1, including those
with header errors corrected. This counter
is formed after the UPC function.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.1.1.3 |
nncVpl15MinCurrentClp0InCellsNumber of valid cells admitted at ingress
on the VPL with CLP=0, including those with
header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.1.1.4 |
nncVpl15MinCurrentDiscardClp0And1InCellsNumber of valid cells with CLP=1 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.1.1.5 |
nncVpl15MinCurrentDiscardClp0InCellsNumber of valid cells with CLP=0 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.1.1.6 |
nncVpl15MinCurrentTaggedInCellsNumber of valid cells admitted at ingress
with CLP=0, with CLP set to 1 by ingress
traffic policing, including those with header
errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.1.1.7 |
nncVpl15MinCurrentClp0And1OutCellsNumber of valid cells transmitted at egress
on the VPL with CLP=0 or 1.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.1.1.8 |
nncVpl15MinCurrentClp0OutCellsNumber of valid cells transmitted at egress
on the VPL with CLP=0.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.1.1.9 |
nncVpl15MinIntervalTableThe nncVpl15MinIntervalTable contains
objects for monitoring the performance of a
virtual path link over a historical stratum
of M 15 minute intervals. SEQUENCE OF NncVpl15MinIntervalEntry .1.3.6.1.4.1.123.3.29.1.2 |
nncVpl15MinIntervalEntryAn entry in the 15 minute interval
statistics table. Each conceptual row
contains statistics for a particular
VPL and interval. NncVpl15MinIntervalEntry .1.3.6.1.4.1.123.3.29.1.2.1 |
nncVpl15MinIntervalNumberThe interval number (N) of the statistics in
this row. NncExtRelIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.2.1.1 |
nncVpl15MinIntervalStateThe state of the interval represented by
this row. The object provides a status for
those entries which have been reset by the
user, or have been subject to a wall clock
time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.2.1.2 |
nncVpl15MinIntervalAbsoluteIntervalNumberThe absolute interval number of this
interval.ro NncExtAbsIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.2.1.3 |
nncVpl15MinIntervalClp0And1InCellsNumber of valid cells admitted at ingress
on the VPL with CLP=0 or 1, including those
with header errors corrected. This counter
is formed after the UPC function.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.2.1.4 |
nncVpl15MinIntervalClp0InCellsNumber of valid cells admitted at ingress
on the VPL with CLP=0, including those with
header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.2.1.5 |
nncVpl15MinIntervalDiscardClp0And1InCellsNumber of valid cells with CLP=1 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.2.1.6 |
nncVpl15MinIntervalDiscardClp0InCellsNumber of valid cells with CLP=0 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.2.1.7 |
nncVpl15MinIntervalTaggedInCellsNumber of valid cells admitted at ingress
with CLP=0, with CLP set to 1 by ingress
traffic policing, including those with header
errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.2.1.8 |
nncVpl15MinIntervalClp0And1OutCellsNumber of valid cells transmitted at egress
on the VPL with CLP=0 or 1.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.2.1.9 |
nncVpl15MinIntervalClp0OutCellsNumber of valid cells transmitted at egress
on the VPL with CLP=0.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.2.1.10 |
nncVpl1HourCurrentTableThe nncVpl1HourCurrentTable contains
objects for monitoring the performance of a
VPL during the current 1 hour interval. SEQUENCE OF NncVpl1HourCurrentEntry .1.3.6.1.4.1.123.3.29.1.3 |
nncVpl1HourCurrentEntryAn entry in the 1 hour current statistics
table. Each conceptual row contains current
statistics for a particular VPL.
By default, 1 Hour statistics are not
gathered. In order to enable gathering of
these statistics, a row must be created.
The semantics of nncVpl1HourCurrentRowStatus
is the same as the definition of RowStatus
in rfc1443 with the following constraints.
1. Creation is done in one step, that is, by
setting the nncVpl1HourCurrentRowStatus
column to createAndGo. Setting the column
to createAndWait will return wrongValue.
2. The VPI specified in the instance must
be an endpoint that is currently used in
a VPL otherwise the agent will return
return inconsistentValue and no row is
created.
3. If the maximum number of rows (an agent
limitation) has been reached,
resourceUnavailable is returned and no
row is created.
4. Creation of a current row will also enable
the corresponding interval table whose
rows will be created when intervals are
completed.
5. Statistics collection is disabled by
setting the column to destroy. This will
also remove all corresponding rows in
the interval table. NncVpl1HourCurrentEntry .1.3.6.1.4.1.123.3.29.1.3.1 |
nncVpl1HourCurrentStateThe state of the current interval. The
object provides a status for those entries
which have been reset by the user, or have
been subject to a wall clock time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.3.1.1 |
nncVpl1HourCurrentAbsoluteIntervalNumberThe absolute interval number of this
interval.ro NncExtAbsIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.3.1.2 |
nncVpl1HourCurrentClp0And1InCellsNumber of valid cells admitted at ingress
on the VPL with CLP=0 or 1, including those
with header errors corrected. This counter
is formed after the UPC function.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.3.1.3 |
nncVpl1HourCurrentClp0InCellsNumber of valid cells admitted at ingress
on the VPL with CLP=0, including those with
header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.3.1.4 |
nncVpl1HourCurrentDiscardClp0And1InCellsNumber of valid cells with CLP=1 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.3.1.5 |
nncVpl1HourCurrentDiscardClp0InCellsNumber of valid cells with CLP=0 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.3.1.6 |
nncVpl1HourCurrentTaggedInCellsNumber of valid cells admitted at ingress
with CLP=0, with CLP set to 1 by ingress
traffic policing, including those with header
errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.3.1.7 |
nncVpl1HourCurrentClp0And1OutCellsNumber of valid cells transmitted at egress
on the VPL with CLP=0 or 1.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.3.1.8 |
nncVpl1HourCurrentClp0OutCellsNumber of valid cells transmitted at egress
on the VPL with CLP=0.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.3.1.9 |
nncVpl1HourCurrentRowStatusThis object is used to create and delete
rows in this table.
The following sets are invalid: createAndWait,
active, and notInService. Such sets will
return wrongValue.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.123.3.29.1.3.1.10 |
nncVpl1HourIntervalTableThe nncVpl1HourIntervalTable contains
objects for monitoring the performance of a
virtual path link over a historical stratum
of M 1 hour intervals. SEQUENCE OF NncVpl1HourIntervalEntry .1.3.6.1.4.1.123.3.29.1.4 |
nncVpl1HourIntervalEntryAn entry in the 1 hour interval statistics
table. Each conceptual row contains
statistics for a particular VPL and interval.
These rows are automatically created if
there is a corresponding entry in the 1 hour
current table. NncVpl1HourIntervalEntry .1.3.6.1.4.1.123.3.29.1.4.1 |
nncVpl1HourIntervalNumberThe interval number (N) of the statistics in
this row. NncExtRelIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.4.1.1 |
nncVpl1HourIntervalStateThe state of the interval represented by
this row. The object provides a status for
those entries which have been reset by the
user, or have been subject to a wall clock
time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.4.1.2 |
nncVpl1HourIntervalAbsoluteIntervalNumberThe absolute interval number of this
interval.ro NncExtAbsIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.4.1.3 |
nncVpl1HourIntervalClp0And1InCellsNumber of valid cells admitted at ingress
on the VPL with CLP=0 or 1, including those
with header errors corrected. This counter
is formed after the UPC function.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.4.1.4 |
nncVpl1HourIntervalClp0InCellsNumber of valid cells admitted at ingress
on the VPL with CLP=0, including those with
header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.4.1.5 |
nncVpl1HourIntervalDiscardClp0And1InCellsNumber of valid cells with CLP=1 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.4.1.6 |
nncVpl1HourIntervalDiscardClp0InCellsNumber of valid cells with CLP=0 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.4.1.7 |
nncVpl1HourIntervalTaggedInCellsNumber of valid cells admitted at ingress
with CLP=0, with CLP set to 1 by ingress
traffic policing, including those with header
errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.4.1.8 |
nncVpl1HourIntervalClp0And1OutCellsNumber of valid cells transmitted at egress
on the VPL with CLP=0 or 1.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.4.1.9 |
nncVpl1HourIntervalClp0OutCellsNumber of valid cells transmitted at egress
on the VPL with CLP=0.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.4.1.10 |
nncVcl15MinCurrentTableThe nncVcl15MinCurrentTable contains
objects for monitoring the performance of a
VCL during the current 15 minute interval. SEQUENCE OF NncVcl15MinCurrentEntry .1.3.6.1.4.1.123.3.29.1.5 |
nncVcl15MinCurrentEntryAn entry in the 15 minute current
statistics table. Each conceptual row
contains current statistics for a
particular VCL. NncVcl15MinCurrentEntry .1.3.6.1.4.1.123.3.29.1.5.1 |
nncVcl15MinCurrentStateThe state of the current interval. The
object provides a status for those entries
which have been reset by the user, or have
been subject to a wall clock time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.5.1.1 |
nncVcl15MinCurrentAbsoluteIntervalNumberThe absolute interval number of this
interval.ro NncExtAbsIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.5.1.2 |
nncVcl15MinCurrentClp0And1InCellsNumber of valid cells admitted at ingress
on the VCL with CLP=0 or 1, including those
with header errors corrected. This counter
is formed after the UPC function.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.5.1.3 |
nncVcl15MinCurrentClp0InCellsNumber of valid cells admitted at ingress
on the VCL with CLP=0, including those with
header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.5.1.4 |
nncVcl15MinCurrentDiscardClp0And1InCellsNumber of valid cells with CLP=1 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.5.1.5 |
nncVcl15MinCurrentDiscardClp0InCellsNumber of valid cells with CLP=0 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.5.1.6 |
nncVcl15MinCurrentTaggedInCellsNumber of valid cells admitted at ingress
with CLP=0, with CLP set to 1 by ingress
traffic policing, including those with header
errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.5.1.7 |
nncVcl15MinCurrentClp0And1OutCellsNumber of valid cells transmitted at egress
on the VCL with CLP=0 or 1.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.5.1.8 |
nncVcl15MinCurrentClp0OutCellsNumber of valid cells transmitted at egress
on the VCL with CLP=0.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.5.1.9 |
nncVcl15MinIntervalTableThe nncVcl15MinIntervalTable contains
objects for monitoring the performance of a
virtual channel link over a historical stratum
of M 15 minute intervals. SEQUENCE OF NncVcl15MinIntervalEntry .1.3.6.1.4.1.123.3.29.1.6 |
nncVcl15MinIntervalEntryAn entry in the 15 minute interval
statistics table. Each conceptual row
contains statistics for a particular
VCL and interval. NncVcl15MinIntervalEntry .1.3.6.1.4.1.123.3.29.1.6.1 |
nncVcl15MinIntervalNumberThe interval number (N) of the statistics in
this row. NncExtRelIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.6.1.1 |
nncVcl15MinIntervalStateThe state of the interval represented by
this row. The object provides a status for
those entries which have been reset by the
user, or have been subject to a wall clock
time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.6.1.2 |
nncVcl15MinIntervalAbsoluteIntervalNumberThe absolute interval number of this
interval.ro NncExtAbsIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.6.1.3 |
nncVcl15MinIntervalClp0And1InCellsNumber of valid cells admitted at ingress
on the VCL with CLP=0 or 1, including those
with header errors corrected. This counter
is formed after the UPC function.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.6.1.4 |
nncVcl15MinIntervalClp0InCellsNumber of valid cells admitted at ingress
on the VCL with CLP=0, including those with
header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.6.1.5 |
nncVcl15MinIntervalDiscardClp0And1InCellsNumber of valid cells with CLP=1 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.6.1.6 |
nncVcl15MinIntervalDiscardClp0InCellsNumber of valid cells with CLP=0 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.6.1.7 |
nncVcl15MinIntervalTaggedInCellsNumber of valid cells admitted at ingress
with CLP=0, with CLP set to 1 by ingress
traffic policing, including those with header
errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.6.1.8 |
nncVcl15MinIntervalClp0And1OutCellsNumber of valid cells transmitted at egress
on the VCL with CLP=0 or 1.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.6.1.9 |
nncVcl15MinIntervalClp0OutCellsNumber of valid cells transmitted at egress
on the VCL with CLP=0.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.6.1.10 |
nncVcl1HourCurrentTableThe nncVcl1HourCurrentTable contains
objects for monitoring the performance of a
VCL during the current 1 hour interval. SEQUENCE OF NncVcl1HourCurrentEntry .1.3.6.1.4.1.123.3.29.1.7 |
nncVcl1HourCurrentEntryAn entry in the 1 hour current statistics
table. Each conceptual row contains current
statistics for a particular VCL.
By default, 1 Hour statistics are not
gathered. In order to enable gathering of
these statistics, a row must be created.
The semantics of nncVcl1HourCurrentRowStatus
is the same as the definition of RowStatus
in rfc1443 with the following constraints.
1. Creation is done in one step, that is, by
setting the nncVcl1HourCurrentRowStatus
column to createAndGo. Setting the column
to createAndWait will return wrongValue.
2. The VCI specified in the instance must
be an endpoint that is currently used in
a VCL otherwise the agent will return
return inconsistentValue and no row is
created.
3. If the maximum number of rows (an agent
limitation) has been reached,
resourceUnavailable is returned and no
row is created.
4. Creation of a current row will also enable
the corresponding interval table whose
rows will be created when intervals are
completed.
5. Statistics collection is disabled by
setting the column to destroy. This will
also remove all corresponding rows in
the interval table. NncVcl1HourCurrentEntry .1.3.6.1.4.1.123.3.29.1.7.1 |
nncVcl1HourCurrentStateThe state of the current interval. The
object provides a status for those entries
which have been reset by the user, or have
been subject to a wall clock time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.7.1.1 |
nncVcl1HourCurrentAbsoluteIntervalNumberThe absolute interval number of this
interval.ro NncExtAbsIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.7.1.2 |
nncVcl1HourCurrentClp0And1InCellsNumber of valid cells admitted at ingress
on the VCL with CLP=0 or 1, including those
with header errors corrected. This counter
is formed after the UPC function.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.7.1.3 |
nncVcl1HourCurrentClp0InCellsNumber of valid cells admitted at ingress
on the VCL with CLP=0, including those with
header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.7.1.4 |
nncVcl1HourCurrentDiscardClp0And1InCellsNumber of valid cells with CLP=1 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.7.1.5 |
nncVcl1HourCurrentDiscardClp0InCellsNumber of valid cells with CLP=0 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.7.1.6 |
nncVcl1HourCurrentTaggedInCellsNumber of valid cells admitted at ingress
with CLP=0, with CLP set to 1 by ingress
traffic policing, including those with header
errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.7.1.7 |
nncVcl1HourCurrentClp0And1OutCellsNumber of valid cells transmitted at egress
on the VCL with CLP=0 or 1.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.7.1.8 |
nncVcl1HourCurrentClp0OutCellsNumber of valid cells transmitted at egress
on the VCL with CLP=0.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.7.1.9 |
nncVcl1HourCurrentRowStatusThis object is used to create and delete
rows in this table.
The following sets are invalid: createAndWait,
active, and notInService. Such sets will
return wrongValue.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.123.3.29.1.7.1.10 |
nncVcl1HourIntervalTableThe nncVcl1HourIntervalTable contains
objects for monitoring the performance of a
virtual Channel link over a historical stratum
of M 1 hour intervals. SEQUENCE OF NncVcl1HourIntervalEntry .1.3.6.1.4.1.123.3.29.1.8 |
nncVcl1HourIntervalEntryAn entry in the 1 hour interval statistics
table. Each conceptual row contains
statistics for a particular VCL and interval.
These rows are automatically created if
there is a corresponding entry in the 1 hour
current table. NncVcl1HourIntervalEntry .1.3.6.1.4.1.123.3.29.1.8.1 |
nncVcl1HourIntervalNumberThe interval number (N) of the statistics in
this row. NncExtRelIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.8.1.1 |
nncVcl1HourIntervalStateThe state of the interval represented by
this row. The object provides a status for
those entries which have been reset by the
user, or have been subject to a wall clock
time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.8.1.2 |
nncVcl1HourIntervalAbsoluteIntervalNumberThe absolute interval number of this
interval.ro NncExtAbsIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.8.1.3 |
nncVcl1HourIntervalClp0And1InCellsNumber of valid cells admitted at ingress
on the VCL with CLP=0 or 1, including those
with header errors corrected. This counter
is formed after the UPC function.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.8.1.4 |
nncVcl1HourIntervalClp0InCellsNumber of valid cells admitted at ingress
on the VCL with CLP=0, including those with
header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.8.1.5 |
nncVcl1HourIntervalDiscardClp0And1InCellsNumber of valid cells with CLP=1 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.8.1.6 |
nncVcl1HourIntervalDiscardClp0InCellsNumber of valid cells with CLP=0 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.8.1.7 |
nncVcl1HourIntervalTaggedInCellsNumber of valid cells admitted at ingress
with CLP=0, with CLP set to 1 by ingress
traffic policing, including those with header
errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.8.1.8 |
nncVcl1HourIntervalClp0And1OutCellsNumber of valid cells transmitted at egress
on the VCL with CLP=0 or 1.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.8.1.9 |
nncVcl1HourIntervalClp0OutCellsNumber of valid cells transmitted at egress
on the VCL with CLP=0.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.8.1.10 |
nncDepthOf15MinHistoricalStrataThe depth of the historical strata of
15min interval tables in this module.ro NncExtRelIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.9 |
nncVplStatTableThe nncVplStatTable contains objects
for monitoring the accumulated performance
of a VPL since measurement started on the VPL. SEQUENCE OF NncVplStatEntry .1.3.6.1.4.1.123.3.29.1.10 |
nncVplStatEntryAn entry in the Vpl Stat table.
Each conceptual row contains accumulated
statistics for a particular VPL. NncVplStatEntry .1.3.6.1.4.1.123.3.29.1.10.1 |
nncVplStatClp0And1InCellsNumber of valid cells admitted at ingress
on the VPL with CLP=0 or 1, including those
with header errors corrected. This counter
is formed after the UPC function.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.10.1.1 |
nncVplStatClp0InCellsNumber of valid cells admitted at ingress
on the VPL with CLP=0, including those with
header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.10.1.2 |
nncVplStatDiscardClp0And1InCellsNumber of valid cells with CLP=1 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.10.1.3 |
nncVplStatDiscardClp0InCellsNumber of valid cells with CLP=0 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.10.1.4 |
nncVplStatTaggedInCellsNumber of valid cells admitted at ingress
with CLP=0, with CLP set to 1 by ingress
traffic policing, including those with header
errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.10.1.5 |
nncVplStatClp0And1OutCellsNumber of valid cells transmitted at egress
on the VPL with CLP=0 or 1.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.10.1.6 |
nncVplStatClp0OutCellsNumber of valid cells transmitted at egress
on the VPL with CLP=0.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.10.1.7 |
nncVclStatTableThe nncVclStatTable contains objects
for monitoring the accumulated performance
of a VCL since measurement started on the VCL. SEQUENCE OF NncVclStatEntry .1.3.6.1.4.1.123.3.29.1.11 |
nncVclStatEntryAn entry in the Stat table.
Each conceptual row contains accumulated
statistics for a particular VCL. NncVclStatEntry .1.3.6.1.4.1.123.3.29.1.11.1 |
nncVclStatClp0And1InCellsNumber of valid cells admitted at ingress
on the VCL with CLP=0 or 1, including those
with header errors corrected. This counter
is formed after the UPC function.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.11.1.1 |
nncVclStatClp0InCellsNumber of valid cells admitted at ingress
on the VCL with CLP=0, including those with
header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.11.1.2 |
nncVclStatDiscardClp0And1InCellsNumber of valid cells with CLP=1 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.11.1.3 |
nncVclStatDiscardClp0InCellsNumber of valid cells with CLP=0 discarded
at ingress by ingress traffic policing,
including those with header errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.11.1.4 |
nncVclStatTaggedInCellsNumber of valid cells admitted at ingress
with CLP=0, with CLP set to 1 by ingress
traffic policing, including those with header
errors corrected.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.11.1.5 |
nncVclStatClp0And1OutCellsNumber of valid cells transmitted at egress
on the VPL with CLP=0 or 1.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.11.1.6 |
nncVclStatClp0OutCellsNumber of valid cells transmitted at egress
on the VPL with CLP=0.ro NncExtCounter64 (NNCGNI0001-SMI) .1.3.6.1.4.1.123.3.29.1.11.1.7 |
nncAtmVplStatCounterTableThis table supplies the maximum interval numbers for valid data for
Atm Vpl End Points in the nncVpl15MinIntervalTable and
nncVpl1HourIntervaltable. SEQUENCE OF NncAtmVplStatCounterEntry .1.3.6.1.4.1.123.3.29.1.12 |
nncAtmVplStatCounterEntryAn Entry in nncAtmVplStatCounterTable. NncAtmVplStatCounterEntry .1.3.6.1.4.1.123.3.29.1.12.1 |
nncAtmVplStatCounterIndexThis index specifies the type of interval available.
1 = hourly
2 = daily (not used)
3 = monthly (not used)
4 = 15 minute interval stats.ro Enumeration .1.3.6.1.4.1.123.3.29.1.12.1.1 |
nncAtmVplStatCounterValueThis values represents the maximum interval number for valid data for
Atm Vpl End Points. This number is based on the type of interval
being reported.ro INTEGER (0..'7fffffff'h) .1.3.6.1.4.1.123.3.29.1.12.1.2 |
nncAtmVclStatCounterTableThis table supplies the maximum interval numbers for valid data for
Atm Vcl End Points in the nncVcl15MinIntervalTable and
nncVcl1HourIntervaltable. SEQUENCE OF NncAtmVclStatCounterEntry .1.3.6.1.4.1.123.3.29.1.13 |
nncAtmVclStatCounterEntryAn Entry in nncAtmVclStatCounterTable. NncAtmVclStatCounterEntry .1.3.6.1.4.1.123.3.29.1.13.1 |
nncAtmVclStatCounterIndexThis index specifies the type of interval available.
1 = hourly
2 = daily (not used)
3 = monthly (not used)
4 = 15 minute interval stats.ro Enumeration .1.3.6.1.4.1.123.3.29.1.13.1.1 |
nncAtmVclStatCounterValueThis values represents the maximum interval number for valid data for
Atm Vcl End Points. This number is based on the type of interval
being reported.ro INTEGER (0..'7fffffff'h) .1.3.6.1.4.1.123.3.29.1.13.1.2 |
nncDepthOf1HourHistoricalStrataThe depth of the historical strata of
1 hour interval tables in this module.ro NncExtRelIntvlNumberType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.14 |
nncVpa15MinCurrentTableThe nncVpa15MinCurrentTable contains
objects for monitoring the performance of a
VPA during the current 15 minute interval. SEQUENCE OF NncVpa15MinCurrentEntry .1.3.6.1.4.1.123.3.29.1.15 |
nncVpa15MinCurrentEntryAn entry in the 15 minute current
statistics table. Each conceptual row
contains current statistics for a
particular VPA NncVpa15MinCurrentEntry .1.3.6.1.4.1.123.3.29.1.15.1 |
nncVpa15MinCurrentStateThe state of the current interval. The
object provides a status for those entries
which have been reset by the user, or have
been subject to a wall clock time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.15.1.1 |
nncVpa15MinCurrentAbsoluteIntervalNumberThe absolute interval number of this
interval.ro Integer32 .1.3.6.1.4.1.123.3.29.1.15.1.2 |
nncVpa15MinCurrentClp0And1OutCellsTotal CLP0 and CLP1 cells transmitted on all
constituent VCs of a particular VPAro Counter64 .1.3.6.1.4.1.123.3.29.1.15.1.3 |
nncVpa15MinCurrentDiscardClp0And1CellsTotal CLP0 and CLP1 cells discarded due to congestion
on all constituent VCs of a particular VPAro Counter64 .1.3.6.1.4.1.123.3.29.1.15.1.4 |
nncVpa15MinCurrentDiscardClp0CellsTotal CLP0 cells discarded due to congestion
on all constituent VCs of a particular VPAro Counter64 .1.3.6.1.4.1.123.3.29.1.15.1.6 |
nncVpa15MinIntervalTableThe nncVpa15MinIntervalTable contains
objects for monitoring the performance of a
VPA during the 15 minute interval. SEQUENCE OF NncVpa15MinIntervalEntry .1.3.6.1.4.1.123.3.29.1.16 |
nncVpa15MinIntervalEntryAn entry in the 15 minute current
statistics table. Each conceptual row
contains current statistics for a
particular VPA NncVpa15MinIntervalEntry .1.3.6.1.4.1.123.3.29.1.16.1 |
nncVpa15MinIntervalNumberThe interval number (N) of the statistics in
this row. Integer32 .1.3.6.1.4.1.123.3.29.1.16.1.1 |
nncVpa15MinIntervalStateThe state of the current interval. The
object provides a status for those entries
which have been reset by the user, or have
been subject to a wall clock time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.16.1.2 |
nncVpa15MinIntervalAbsoluteIntervalNumberThe absolute interval number of this
interval.ro Integer32 .1.3.6.1.4.1.123.3.29.1.16.1.3 |
nncVpa15MinIntervalClp0And1OutCellsTotal CLP0 and CLP1 cells transmitted on all
constituent VCs of a particular VPAro Counter64 .1.3.6.1.4.1.123.3.29.1.16.1.4 |
nncVpa15MinIntervalDiscardClp0And1CellsTotal CLP0 and CLP1 cells discarded due to congestion
on all constituent VCs of a particular VPAro Counter64 .1.3.6.1.4.1.123.3.29.1.16.1.5 |
nncVpa15MinIntervalDiscardClp0CellsTotal CLP0 cells discarded due to congestion
on all constituent VCs of a particular VPAro Counter64 .1.3.6.1.4.1.123.3.29.1.16.1.6 |
nncVpa1HourCurrentTableThe nncVpa1HourCurrentTable contains
objects for monitoring the performance of a
VPA during the current 1 hour interval. SEQUENCE OF NncVpa1HourCurrentEntry .1.3.6.1.4.1.123.3.29.1.17 |
nncVpa1HourCurrentEntryAn entry in the 1 hour current
statistics table. Each conceptual row
contains current statistics for a
particular VPA NncVpa1HourCurrentEntry .1.3.6.1.4.1.123.3.29.1.17.1 |
nncVpa1HourCurrentStateThe state of the current interval. The
object provides a status for those entries
which have been reset by the user, or have
been subject to a wall clock time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.17.1.1 |
nncVpa1HourCurrentAbsoluteIntervalNumberThe absolute interval number of this
interval.ro Integer32 .1.3.6.1.4.1.123.3.29.1.17.1.2 |
nncVpa1HourCurrentClp0And1OutCellsTotal CLP0 and CLP1 cells transmitted on all
constituent VCs of a particular VPAro Counter64 .1.3.6.1.4.1.123.3.29.1.17.1.3 |
nncVpa1HourCurrentDiscardClp0And1CellsTotal CLP0 and CLP1 cells discarded due to congestion
on all constituent VCs of a particular VPAro Counter64 .1.3.6.1.4.1.123.3.29.1.17.1.4 |
nncVpa1HourCurrentDiscardClp0CellsTotal CLP0 cells discarded due to congestion
on all constituent VCs of a particular VPAro Counter64 .1.3.6.1.4.1.123.3.29.1.17.1.5 |
nncVpa1HourIntervalTableThe nncVpa1HourIntervalTable contains
objects for monitoring the performance of a
VPA during the 1 hour interval. SEQUENCE OF NncVpa1HourIntervalEntry .1.3.6.1.4.1.123.3.29.1.18 |
nncVpa1HourIntervalEntryAn entry in the 1hour current
statistics table. Each conceptual row
contains current statistics for a
particular VPA NncVpa1HourIntervalEntry .1.3.6.1.4.1.123.3.29.1.18.1 |
nncVpa1HourIntervalNumberThe interval number (N) of the statistics in
this row. Integer32 .1.3.6.1.4.1.123.3.29.1.18.1.1 |
nncVpa1HourIntervalStateThe state of the current interval. The
object provides a status for those entries
which have been reset by the user, or have
been subject to a wall clock time change.ro NncExtIntvlStateType (NNC-INTERVAL-STATISTICS-TC-MIB) .1.3.6.1.4.1.123.3.29.1.18.1.2 |
nncVpa1HourIntervalAbsoluteIntervalNumberThe absolute interval number of this
interval.ro Integer32 .1.3.6.1.4.1.123.3.29.1.18.1.3 |
nncVpa1HourIntervalClp0And1OutCellsTotal CLP0 and CLP1 cells transmitted on all
constituent VCs of a particular VPAro Counter64 .1.3.6.1.4.1.123.3.29.1.18.1.4 |
nncVpa1HourIntervalDiscardClp0And1CellsTotal CLP0 and CLP1 cells discarded due to congestion
on all constituent VCs of a particular VPAro Counter64 .1.3.6.1.4.1.123.3.29.1.18.1.5 |
nncVpa1HourIntervalDiscardClp0CellsTotal CLP0 cells discarded due to congestion
on all constituent VCs of a particular VPAro Counter64 .1.3.6.1.4.1.123.3.29.1.18.1.6 |
nncAtmStatisticsTraps OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.29.2 |
nncAtmStatisticsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.29.3 |
nncAtmStatisticsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.29.4 |