TIARA-NETWORKS-SNMP-MIB
The TIARA-NETWORKS-SNMP-MIB provides SNMP management capabilities for Tiara Networks gateways and routers, enabling the monitoring of session states, traffic statistics, and interface status for their Layer 2/3 switching and routing products.
Imported Objects
Objects
9 total| Object Name |
|---|
tiaraSnmpMibSNMP Management group for Tiara Networks products. MODULE-IDENTITY .1.3.6.1.4.1.3174.2.5 |
snmpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3174.2.5.1 |
snmpAgentTypeType of SNMP agent running on this entity.ro Enumeration .1.3.6.1.4.1.3174.2.5.1.1 |
snmpRmonSupportedIndicates whether the SNMP agent supports the RMON MIB.ro Enumeration .1.3.6.1.4.1.3174.2.5.1.2 |
snmpTrapRcvrTableThe trap receiver table lists the addresses of the network management stations that should receive trap messages from the agent. This list is used by the agent to send the traps. The snmpTrapRcvrEntryStatus parameter is used to add or delete an entry from the table. Only the entries with valid snmpTrapEntryStatus are used. A maximum of 10 entries can exist in this table at any point in time. A new entry can be created only if the values for all the columnar objects in the table are sent in the same SNMP SET request. SEQUENCE OF SnmpTrapRcvrEntry .1.3.6.1.4.1.3174.2.5.1.4 |
snmpTrapRcvrEntryA SNMP trap-receive table entry contains the information of the network management station to where the trap can be sent by the agent. SnmpTrapRcvrEntry .1.3.6.1.4.1.3174.2.5.1.4.1 |
snmpTrapRcvrEntryStatusThe status of the SNMP trap-receive table entry. By default, the value is set to valid when a new entry is created. When a network management station is deleted from the table the value of the parameter is set to invalid.rw Enumeration .1.3.6.1.4.1.3174.2.5.1.4.1.1 |
snmpTrapRcvrAddressIP address of the network management station which can receive the trap from the agent. It is unique for every entry and used as the index for the SNMP trap-receive table.rw IpAddress .1.3.6.1.4.1.3174.2.5.1.4.1.2 |
snmpTrapRcvrCommunityCommunity string associated with the network management station receiving the trap messages. The community string is used in the trap messages.rw DisplayString .1.3.6.1.4.1.3174.2.5.1.4.1.3 |
More MIBs from Tiara
Browse all TiaraMIBs →The TIARA-NETWORKS-DSX-TE1-MIB provides SNMP management definitions for Tiara Networks DSX T1/E1 interface modules, enabling the monitoring of physical layer statistics including line status, error counts (CRC, slips, framing errors), and interface utilization metrics.
The TIARA-NETWORKS-DSX-TE3-MIB provides SNMP management definitions for Tiara Networks DSX T3/E3 interface modules, enabling the monitoring of physical layer interface states, traffic counters, and error statistics specific to T3 and E3 digital signal cross-connect hardware.
The TIARA-FR-MIB enables monitoring and management of Frame Relay interfaces, virtual circuits, and associated traffic statistics on Tiara Network Inc. hardware. It provides specific counters for PVC status, data transmission errors, and bandwidth utilization to facilitate troubleshooting of legacy WAN connectivity.
The TIARA-NETWORKS-SYSTEM-MIB provides standard SNMP system group functionality for Tiara Networks hardware, enabling the monitoring of core device attributes such as system uptime, contact information, location, and operational status. This module facilitates the collection of fundamental management data required for inventory tracking, fault detection, and baseline performance analysis across Tiara routing and switching platforms.
The TIARARIP-MIB provides vendor-specific monitoring and management capabilities for Tiara Networks routing devices, specifically exposing metrics related to the Routing Information Protocol (RIP) such as neighbor adjacencies, route tables, and protocol state transitions.
The TIARA-PACKETFILTER-MIB provides SNMP management interfaces for Tiara Networks packet filtering appliances, enabling the monitoring of filter rule statistics, packet match counters, and dropped traffic events. It facilitates the retrieval of real-time firewall policy performance metrics and session state data to support network traffic analysis and security auditing.