TIARA-NETWORKS-DSX-TE1-MIB
AI MIB Summary
The TIARA-NETWORKS-DSX-TE1-MIB provides SNMP management definitions for Tiara Networks DSX T1/E1 interface modules, enabling the monitoring of physical layer statistics including line status, error counts (CRC, slips, framing errors), and interface utilization metrics.
Interface MIB definitions for Tiara T1/E1 interface modules.
Main OID:
dsxT1E1MIB.1.3.6.1.4.1.3174.2.7.1.2.1
267
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
267 total| Object Name |
|---|
dsxT1E1MIBInterface MIB definitions for Tiara T1/E1 interface modules. MODULE-IDENTITY .1.3.6.1.4.1.3174.2.7.1.2.1 |
dsxT1E1IfConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.3174.2.7.1.2.1.1 |
dsxT1E1IfConfigLineTableA list of T1/E1 interfaces currently configured. SEQUENCE OF DsxT1E1IfConfigLineEntry .1.3.6.1.4.1.3174.2.7.1.2.1.1.1 |
dsxT1E1IfConfigLineEntryAn entry containing configuration for each T1/E1 interface. DsxT1E1IfConfigLineEntry .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1 |
dsxT1E1IfIndexAn integer value which is an index in to the entries of
ifTable (MIB-II) whose interface type is ds1 INTEGER .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.1 |
dsxT1E1IfConfigServiceModeIndicates the T1/E1 interface is in service if it is TRUE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.2 |
dsxT1E1IfConfigLineModeLine Mode for this T1/E1 interfacerw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.3 |
dsxT1E1IfConfigLineTypeThis variable indicates the variety of T1/E1
interpretation of the usage and error statistics.
The values, in sequence, describe:
TITLE: SPECIFICATION:
esf Extended SuperFrame DS1
d4 AT&T D4 format DS1
e1-MF G.704 (Table 4a) with TS16 multiframing enabled
e1-CRC-MF G.704 (Table 4b) with TS16 multiframing enabledrw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.4 |
dsxT1E1IfConfigLineCodeThis variable describes the variety of Zero
Code Suppression used on the link, which in
turn affects a number of its characteristics.
b8zs refers to the use of a specified pattern
of normal bits and bipolar violations
which are used to replace a sequence of eight
zero bits.
ami refers to a mode wherein no zero code
suppression is present and the line encoding
does not solve the problem directly. In this
application, the higher layer must provide data
which meets or exceeds the pulse density re-
quirements, such as inverting HDLC data.
E1 links, with or without CRC, use dsx1HDB3 or
dsx1AMI.rw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.5 |
dsxT1E1IfConfigLBOSignal attenuation at 772 kHz
lbo-zero-db carrier advised LBO code A 0.0 - 5.5 db
lbo-75-db carrier advised LBO code B 7.5 - 13.0 db
lbo-15-db carrier advised LBO code C 15.0 - 22.0 db
lbo-12-db carrier advised LBO code for E1 short haul
lbo-43-db carrier advised LBO code for E1 long haul
This variable can be set only for CSU linemoderw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.6 |
dsxT1E1IfConfigCableLengthThis variable specifies the length of the
cable in feet.rw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.7 |
dsxT1E1IfConfigRaiAlarmConfigurition of Remote Alarm Indication
Alarm generation and detection.rw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.8 |
dsxT1E1IfConfigTransmitClockThe source of Transmit Clock.
'timing-line' indicates that the recovered re-
ceive clock is used as the transmit clock.
'timing-internal' indicates that a local clock
source is used.rw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.9 |
dsxT1E1IfConfigTimeSlotMapTime slot map of the T1/E1 line that are being used
if it is used corresponding bit position is set.ro OCTET STRING (SIZE (4) ) .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.10 |
dsxT1E1IfConfigCableTypeThe cable type that is being used.
'cable-type-coax' indicates that the cable is coaxial and the impedance is 75 ohm
'cable-type-twistedpair' indicates that the cable is a twisted pair and the impedance is 120 ohm.ro Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.11 |
dsxT1E1IfCircuitIdrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.12 |
dsxT1E1IfContactInforw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.13 |
dsxT1E1IfDescriptionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.14 |
dsxT1E1IfConfigFdlTableA list of T1/E1 interface currently configured. SEQUENCE OF DsxT1E1IfConfigFdlEntry .1.3.6.1.4.1.3174.2.7.1.2.1.1.2 |
dsxT1E1IfConfigFdlEntryConfigurable Facility Data Link (FDL) field for
enable/disable the FDL utility on T1/E1 interface. DsxT1E1IfConfigFdlEntry .1.3.6.1.4.1.3174.2.7.1.2.1.1.2.1 |
dsxT1E1IfConfigFdlThe configuration FDL type
fdl-ansi-only - only supports ANSI FDL ,
fdl-att-only only supports ATT FDL,
fdl-ansi-att supports both ANSI and ATT FDL.rw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.2.1.1 |
dsxT1E1IfConfigFdlCsuDsuTypeThe configuration of the type of equipment
fdl-csu - responds to only CSU FDL requests
fdl-dsu - responds to only DSU FDL requests
fdl-csudsu - responds to both CSU and DSU requests.rw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.2.1.2 |
dsxT1E1IfAlarmConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.3174.2.7.1.2.1.1.3 |
dsxT1E1IfAlarmThresholdConfigTableA list of T1/E1 interface alarm threshold configuration
parameters. SEQUENCE OF DsxT1E1IfAlarmThresholdConfigEntry .1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1 |
dsxT1E1IfAlarmThresholdConfigEntryAn entry containing alarm configuration parameters
for each T1/E1 interface. DsxT1E1IfAlarmThresholdConfigEntry .1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1 |
dsxT1E1IfAlarmThresholdConfigIndexIndex of the Threshold Alarms 1 - 10. INTEGER .1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.1 |
dsxT1E1IfAlarmThresholdConfigObjectThreshold alarm - variables being monitored.rw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.2 |
dsxT1E1IfAlarmThresholdConfigSamplingIntervalSampling Interval is the time between each sampling
period.rw INTEGER .1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.3 |
dsxT1E1IfAlarmThresholdConfigSampleTypeThreshold Alarm: Sampling type
sample-absolute - compares the monitored variable value
againist the thresholds,
sample-delta - compares the monitored variable value change
from previous interval against thresholds.rw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.4 |
dsxT1E1IfAlarmThresholdConfigStartupTypeThreshold Alarm :if TRUE the first sample will be
ignored if thresholds are crossed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.5 |
dsxT1E1IfAlarmThresholdConfigRisingThresholdThreshold Alarm: Rising threshold limitrw INTEGER .1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.6 |
dsxT1E1IfAlarmThresholdConfigFallingThresholdThreshold Alarm: Falling threshold limitrw INTEGER .1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.7 |
dsxT1E1IfTestConfigTableA list of T1/E1 interface test configuration parameters. SEQUENCE OF DsxT1E1IfTestConfigEntry .1.3.6.1.4.1.3174.2.7.1.2.1.1.4 |
dsxT1E1IfTestConfigEntryAn entry containing test configuration parameters for each
currently T1/E1 interface. DsxT1E1IfTestConfigEntry .1.3.6.1.4.1.3174.2.7.1.2.1.1.4.1 |
dsxT1E1IfTestConfigTypeTest type. Specifies the type of test to execute on this
T1/E1 interface.
To perform no-test, payload-loopback-test, line-loopback-test
only TestType is mandatory.
To perform pattern-test, ConfigTime and ConfigPattern are
mandatory.
To perform remote-lpup-test and remote-lpdn-test, ConfigLoopCode
is mandatoryrw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.4.1.1 |
dsxT1E1IfTestConfigTimeTest time. when set to 0, test time is unlimited.
Otherwise duration of test, specified in seconds.rw Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.1.4.1.2 |
dsxT1E1IfTestConfigPatternBit Pattern type used in testing T1/E1 for Pattern Test.rw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.4.1.3 |
dsxT1E1IfTestConfigLoopCodeType of loopcode is used for loopback test.rw Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.1.4.1.4 |
dsxT1E1IfStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.3174.2.7.1.2.1.2 |
dsxT1E1IfStatusTableA list of T1/E1 interface status entries SEQUENCE OF DsxT1E1IfStatusEntry .1.3.6.1.4.1.3174.2.7.1.2.1.2.1 |
dsxT1E1IfStatusEntryAn entry containing status entry for each currently active
T1/E1 interface. DsxT1E1IfStatusEntry .1.3.6.1.4.1.3174.2.7.1.2.1.2.1.1 |
dsxT1E1IfStatusLineStatusThe summary of the status
RRAIStatus - Recieve RAI (Recieve Alarm Indication),
TRAIStatus - Transmit RAI ,
RLOSStatus - Recieve Loss Of Sync,
RISStatus - Recieve Idle Signal
REXZStatus - Recieve Excessive Zeros,
LORCStatus - Loss Of Recive Clock (LORC),
TDEStatus - transmit pulse density,
SendLineCode - transmit linecode
SendPayLoadCode - transmit paylode code
SendResetCode - transmit reset code,
SendTE1Code - transmit T1/E1 linecode,
SendPattern - transmit T1/E1 Pattern,
RcvTestCode - recive test code,
LoopbackStatus - Status of Loop back,
TAISStatus - Transmit Alarm Indication Siganl,
RAISStatus - Recieve Alarm Indication Signal,
LOFStatus - Loss Of Frame.ro Bits .1.3.6.1.4.1.3174.2.7.1.2.1.2.1.1.1 |
dsxT1E1IfStatusTransmitClockThe source of Tranmit Clock.
'timing-line' indicates that the recovered re-
ceive clock is used as the transmit clock.
'timing-internal' indicates that a local clock
source is used.ro Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.2.1.1.2 |
dsxT1E1IfAlarmStatusTableA list of T1/E1 interface alarm status entries SEQUENCE OF DsxT1E1IfAlarmStatusEntry .1.3.6.1.4.1.3174.2.7.1.2.1.2.2 |
dsxT1E1IfAlarmStatusEntryAn entry containing alarm status for each T1/E1 interface. DsxT1E1IfAlarmStatusEntry .1.3.6.1.4.1.3174.2.7.1.2.1.2.2.1 |
dsxT1E1IfAlarmStatusAlarmStatusAlarm Status of T1/E1 interface.
RRAI - Recieve Rx Alarm Indication,
TRAI - Transmit Rx Alarm Indication,
RAIS - Recieve Alarm Indication Signal,
TAIS - Transmit Alarm Indication Signal,
RLOF - Recieve Loss Of Frame,
RLOS - Recieve Loss Of Signal,
Loopback - if looped back state is true,
RIS - Recieve Idle Signal,
REXZ - Recieve Excessive Zeros,
RFEBE - Recieve Far End Block Error,
RPE - Recieve Parity Error,
RCPE - Recieve C-Parity Error,
LORC - Loss Of Recieve Clock,
TPDE - Transmit Pulse DEnsity,
TFEBE - Transmit Far End Block Error,
ibTest - InBand Test running if true.ro Bits .1.3.6.1.4.1.3174.2.7.1.2.1.2.2.1.1 |
dsxT1E1IfAlarmStatusThresholdStatusStatus of the user configurable threshold Alarms
1 means present.ro Bits .1.3.6.1.4.1.3174.2.7.1.2.1.2.2.1.2 |
dsxT1E1IfTestStatusTableA list of T1/E1 interface test status entries SEQUENCE OF DsxT1E1IfTestStatusEntry .1.3.6.1.4.1.3174.2.7.1.2.1.2.3 |
dsxT1E1IfTestStatusEntryAn entry containing test status entry for each
T1/E1 interface. DsxT1E1IfTestStatusEntry .1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1 |
dsxT1E1IfTestStatusTestTypeTest type initiated on T1/E1 line.ro Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.1 |
dsxT1E1IfTestStatusTestTimeTime elapsed since the test started on T1/E1 linero Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.2 |
dsxT1E1IfTestStatusTestStateCurrent state of the running test on T1/E1 linero Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.3 |
dsxT1E1IfTestStatusTestPatternBit Pattern generated to test the T1/E1, only relevent to
Pattern Test.ro Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.4 |
dsxT1E1IfTestStatusLockedSecondsCount of seconds, during which the pattern is
synchronizedro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.5 |
dsxT1E1IfTestStatusSyncLossCountCounter for the pattern synchronization lossesro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.6 |
dsxT1E1IfTestStatusErrorCountCounter for the Bit error during the testro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.7 |
dsxT1E1IfTestStatusLoopCodeThe loop codes transmitted on the T1/E1 interface
Only relevent to the Remote LoopUp and Remote LoopDown tests.ro Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.8 |
dsxT1E1IfLastTestResultTableA list of T1/E1 interface previous test status entries SEQUENCE OF DsxT1E1IfLastTestResultEntry .1.3.6.1.4.1.3174.2.7.1.2.1.2.4 |
dsxT1E1IfLastTestResultEntryAn entry containing previous test status entry for each
T1/E1 interface. DsxT1E1IfLastTestResultEntry .1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1 |
dsxT1E1IfLastTestResultTestTypeStatus of the previous test conducted on this T1/E1 interface,
this field corresponds to Type of Test conductedro Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.1 |
dsxT1E1IfLastTestResultTestTimeDuration of the test conducted in previous testro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.2 |
dsxT1E1IfLastTestResultTestStateThis field shows in which state previous test was
endedro Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.3 |
dsxT1E1IfLastTestResultTestPatternIf the previous test conducted was pattern test, This
field will have type of pattern used to test.ro Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.4 |
dsxT1E1IfLastTestResultLockedSecondsDuration in which signal was synchronized while under test.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.5 |
dsxT1E1IfLastTestResultSyncLossCountCounter for the pattern synchronization losses in
previous test results.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.6 |
dsxT1E1IfLastTestResultErrorCountCounter for the Bit error during the test in previous testro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.7 |
dsxT1E1IfLastTestResultLoopCodeType loopcode used to put interface under remote loop backro Enumeration .1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.8 |
dsxT1E1IfStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.3174.2.7.1.2.1.3 |
dsxT1E1IfArchiveStatsValidIntervalsTableNumber of intervals available in archive statistics table for
this T1/E1 interface SEQUENCE OF DsxT1E1IfArchiveStatsValidIntervalsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.1 |
dsxT1E1IfArchiveStatsValidIntervalsEntryAn entry containing statistics entry for each
T1/E1 interface. DsxT1E1IfArchiveStatsValidIntervalsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1 |
dsxT1E1IfAnsiArchiveStatsValidIntervalsTotal number of archived statistics collected according to
ANSI standards.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1.1 |
dsxT1E1IfAttArchiveStatsValidIntervalsTotal number of archived statistics collected according to
ATT standards.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1.2 |
dsxT1E1IfItutArchiveStatsValidIntervalsTotal number of archived statistics collected according to
ITU-T standards.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1.3 |
dsxT1E1IfIetfArchiveStatsValidIntervalsTotal number of archived statistics collected according to
IETF standards.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1.4 |
dsxT1E1IfUserTotalStatsValidDaysTotal number of days archived statistics collected according to
User definations.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1.5 |
dsxT1E1IfUserArchiveStatsValidIntervalsUser Archive Stats Valid Interval.
Setting this variable to 0 will clear
all the User Statistics Tablesrw INTEGER .1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1.6 |
dsxT1E1IfAnsiStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.3174.2.7.1.2.1.3.2 |
dsxT1E1IfAnsiCurrentStatsTableStatistics collected according ANSI standards
and collected in current 900 secondss period. SEQUENCE OF DsxT1E1IfAnsiCurrentStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1 |
dsxT1E1IfAnsiCurrentStatsEntryStatistics collected in current 900 secs ( i.e. 15 mins) kept
in this table DsxT1E1IfAnsiCurrentStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1 |
dsxT1E1IfAnsiCurrentStatsUASStateThe State of T1/E1 line according to ANSI standardsro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.1 |
dsxT1E1IfAnsiCurrentStatsTimeInCurrentThe number of seconds that have elapsed since the
beginning of the current error measurement periodro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.2 |
dsxT1E1IfAnsiCurrentPathStatsCVThe number of Path Coding Violations encoun-
tered by a T1/E1 interface in the current 15
minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.3 |
dsxT1E1IfAnsiCurrentPathStatsESThe number of Errored Seconds, encountered by
a T1/E1 interface in the current 15 minute inter-
val.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.4 |
dsxT1E1IfAnsiCurrentPathStatsSESThe number of Severely Errored Seconds encoun-
tered by a T1/E1 interface in the current 15
minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.5 |
dsxT1E1IfAnsiCurrentPathStatsSASSeconds with Severe Alarmsro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.6 |
dsxT1E1IfAnsiCurrentPathStatsCSSThe number of Controlled Slip Seconds encoun-
tered by a T1/E1 interface in the current 15
minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.7 |
dsxT1E1IfAnsiCurrentPathStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface in the current 15 minute in-
terval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.8 |
dsxT1E1IfAnsiCurrentLineStatsCVThe number of Line Coding Violations encoun-
tered by a T1/E1 interface in the current 15
minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.9 |
dsxT1E1IfAnsiCurrentLineStatsESThe number of Errored Seconds, encountered by
a T1/E1 interface in the current 15 minute inter-
val.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.10 |
dsxT1E1IfAnsiCurrentLineStatsSESThe number of Severely Errored Seconds encoun-
tered by a T1/E1 interface in the current 15
minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.11 |
dsxT1E1IfAnsiTotalStatsTableTable for the Total Statistics over past 24 hrs SEQUENCE OF DsxT1E1IfAnsiTotalStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2 |
dsxT1E1IfAnsiTotalStatsEntryTable for the Total Statistics over past 24 hrs DsxT1E1IfAnsiTotalStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1 |
dsxT1E1IfAnsiTotalPathStatsCVThe number of Path Coding Violations encoun-
tered by a T1/E1 interface in the previous 24
hour interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.1 |
dsxT1E1IfAnsiTotalPathStatsESThe number of Errored Seconds encountered by a
T1/E1 interface in the previous 24 hour interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.2 |
dsxT1E1IfAnsiTotalPathStatsSESThe number of Severely Errored Seconds encoun-
tered by a T1/E1 interface in the previous 24
hour interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.3 |
dsxT1E1IfAnsiTotalPathStatsSASTotal No seconds with Severe Alarms in past 24 hrsro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.4 |
dsxT1E1IfAnsiTotalPathStatsCSSThe number of Controlled Slip Seconds encoun-
tered by a T1/E1 interface in the previous 24
hour interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.5 |
dsxT1E1IfAnsiTotalPathStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface in the previous 24 hour in-
terval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.6 |
dsxT1E1IfAnsiTotalLineStatsCVThe number of Line Coding Violations encoun-
tered by a T1/E1 interface in the previous 24
hour interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.7 |
dsxT1E1IfAnsiTotalLineStatsESThe number of Errored Seconds encountered by a
T1/E1 interface in the previous 24 hour interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.8 |
dsxT1E1IfAnsiTotalLineStatsSESThe number of Severely Errored Seconds encoun-
tered by a T1/E1 interface in the previous 24
hour interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.9 |
dsxT1E1IfAnsiArchiveIntervalStatsTableA list of T1/E1 interface test status entries SEQUENCE OF DsxT1E1IfAnsiArchiveIntervalStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3 |
dsxT1E1IfAnsiArchiveIntervalStatsEntryAn entry containing status entry for each currently active
T1/E1 interface. DsxT1E1IfAnsiArchiveIntervalStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1 |
dsxT1E1IfAnsiArchiveStatsIntervalNumber of Intervals available in archive table Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.1 |
dsxT1E1IfAnsiArchiveIntervalPathStatsCVThe number of Path Coding Violations encoun-
tered by a T1 interface in the archive
intervals.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.2 |
dsxT1E1IfAnsiArchiveIntervalPathStatsESThe number of Errored Seconds, encountered by
a DS3 interface in the archive intervals.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.3 |
dsxT1E1IfAnsiArchiveIntervalPathStatsSESThe number of Severely Errored Seconds encoun-
tered by a T1/E1 interface in the archive
intervals .ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.4 |
dsxT1E1IfAnsiArchiveIntervalPathStatsSASThe number of Severely Errored Framing Seconds
encountered by a T1/E1 interface in the archive
intervals.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.5 |
dsxT1E1IfAnsiArchiveIntervalPathStatsCSSThe number of Controlled Slip Seconds
encountered by a T1/E1 interface in the archive
intervals.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.6 |
dsxT1E1IfAnsiArchiveIntervalPathStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface in the archive intervals.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.7 |
dsxT1E1IfAnsiArchiveIntervalLineStatsCVThe number of Line Coding Violations encoun-
tered by a T1/E1 interface in the archive
intervals.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.8 |
dsxT1E1IfAnsiArchiveIntervalLineStatsESThe number of Errored Seconds, encountered by
a T1/E1 interface in the archive intervals.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.9 |
dsxT1E1IfAnsiArchiveIntervalLineStatsSESThe number of Severely Errored Seconds encoun-
tered by a T1/E1 interface in the archive
intervals .ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.10 |
dsxT1E1IfAttStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.3174.2.7.1.2.1.3.3 |
dsxT1E1IfAttCurrentStatsTableA list of T1/E1 interface statistics for current
interval SEQUENCE OF DsxT1E1IfAttCurrentStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1 |
dsxT1E1IfAttCurrentStatsEntryAn entry containing statistics for each currently active
T1/E1 interface. DsxT1E1IfAttCurrentStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1 |
dsxT1E1IfAttCurrentStatsUASStateThe Current state of availablity of T1/E1 interfacero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.1 |
dsxT1E1IfAttCurrentStatsTimeInCurrentThe number of seconds that have elapsed
since the beginning of the far end current
error-measurement period.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.2 |
dsxT1E1IfAttCurrentStatsEEVThe number of Far Far End Errored EVents en-
countered by a T1/E1 interface in the current 15
minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.3 |
dsxT1E1IfAttCurrentStatsESThe number of Far Far End Errored Seconds en-
countered by a T1/E1 interface in the current 15
minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.4 |
dsxT1E1IfAttCurrentStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface in the current 15 minute in-
terval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.5 |
dsxT1E1IfAttCurrentStatsBESThe number of Bursty Errored Seconds (BESs)
encountered by a T1/E1 interface in the current
15 minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.6 |
dsxT1E1IfAttCurrentStatsSESThe number of Far End Severely Errored Seconds
encountered by a T1/E1 interface in the current
15 minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.7 |
dsxT1E1IfAttCurrentStatsLOFCThe number of loss of frames occurred in the
current 15 minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.8 |
dsxT1E1IfAttCurrentStatsCSSThe number of Far End Controlled Slip Seconds
encountered by a T1/E1 interface in the current
interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.9 |
dsxT1E1IfAttTotalStatsTableA list of T1/E1 interface test status entries SEQUENCE OF DsxT1E1IfAttTotalStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2 |
dsxT1E1IfAttTotalStatsEntryAn entry containing status entry for each currently active
T1/E1 interface. DsxT1E1IfAttTotalStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1 |
dsxT1E1IfAttTotalStatsEEVInvoke the configured test.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.1 |
dsxT1E1IfAttTotalStatsESThe number of Near End Errored Seconds encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.2 |
dsxT1E1IfAttTotalStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.3 |
dsxT1E1IfAttTotalStatsBESThe number of Bursty Errored Seconds (BESs)
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.4 |
dsxT1E1IfAttTotalStatsSESThe number of Near End Severely Errored Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.5 |
dsxT1E1IfAttTotalStatsLOFCCount of loss of frames.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.6 |
dsxT1E1IfAttTotalStatsCSSThe number of Near End Controlled Slip Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.7 |
dsxT1E1IfAttArchiveStatsTableA list of T1/E1 interface test status entries SEQUENCE OF DsxT1E1IfAttArchiveStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3 |
dsxT1E1IfAttArchiveStatsEntryAn entry containing status entry for each currently active
T1/E1 interface. DsxT1E1IfAttArchiveStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1 |
dsxT1E1IfAttArchiveIntervalTime interval for archiving the statistics. Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.1 |
dsxT1E1IfAttArchiveStatsEEVInvoke the configured test.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.2 |
dsxT1E1IfAttArchiveStatsESThe number of Near End Errored Seconds encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.3 |
dsxT1E1IfAttArchiveStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.4 |
dsxT1E1IfAttArchiveStatsBESThe number of Bursty Errored Seconds (BESs)
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.5 |
dsxT1E1IfAttArchiveStatsSESThe number of Near End Severely Errored Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.6 |
dsxT1E1IfAttArchiveStatsLOFCCount of loss of frames.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.7 |
dsxT1E1IfAttArchiveStatsCSSThe number of Near End Controlled Slip Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.8 |
dsxT1E1IfItutStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.3174.2.7.1.2.1.3.4 |
dsxT1E1IfItutCurrentStatsTableA list of T1/E1 interface statistics for current interval SEQUENCE OF DsxT1E1IfItutCurrentStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1 |
dsxT1E1IfItutCurrentStatsEntryAn entry containing statistics for each currently active T1/E1 interface. DsxT1E1IfItutCurrentStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1 |
dsxT1E1IfItutCurrentStatsUASStateThe Current state of availablity of T1/E1 interfacero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.1 |
dsxT1E1IfItutCurrentStatsTimeInCurrentThe number of seconds that have elapsed since the beginning of the far end current
error-measurement period.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.2 |
dsxT1E1IfItutCurrentStatsESThe number of Far Far End Errored Seconds en-
countered by a T1/E1 interface in the current 15
minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.3 |
dsxT1E1IfItutCurrentStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface in the current 15 minute in-
terval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.4 |
dsxT1E1IfItutCurrentStatsBBEThe number of Background Block Errors encountered by a T1/E1 interface in the current 15 minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.5 |
dsxT1E1IfItutCurrentStatsSESThe number of Far End Severely Errored Seconds encountered by a T1/E1 interface in the current 15 minute interval.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.6 |
dsxT1E1IfItutTotalStatsTableA list of T1/E1 interface test status entries SEQUENCE OF DsxT1E1IfItutTotalStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2 |
dsxT1E1IfItutTotalStatsEntryAn entry containing status entry for each currently active T1/E1 interface. DsxT1E1IfItutTotalStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1 |
dsxT1E1IfItutTotalStatsESThe number of Near End Errored Seconds encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.1 |
dsxT1E1IfItutTotalStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.2 |
dsxT1E1IfItutTotalStatsBBEThe number of Background Block Errors (BBEs)
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.3 |
dsxT1E1IfItutTotalStatsSESThe number of Near End Severely Errored Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.4 |
dsxT1E1IfItutArchiveStatsTableA list of T1/E1 interface test status entries SEQUENCE OF DsxT1E1IfItutArchiveStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3 |
dsxT1E1IfItutArchiveStatsEntryAn entry containing status entry for each currently active
T1/E1 interface. DsxT1E1IfItutArchiveStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1 |
dsxT1E1IfItutArchiveIntervalTime interval for archiving the statistics. Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.1 |
dsxT1E1IfItutArchiveStatsESThe number of Near End Errored Seconds encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.2 |
dsxT1E1IfItutArchiveStatsUASThe number of Unavailable Seconds encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.3 |
dsxT1E1IfItutArchiveStatsBBEThe number of Background Block Errors Errored Seconds (BESs)encountered by a T1/E1interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.4 |
dsxT1E1IfItutArchiveStatsSESThe number of Near End Severely Errored Seconds encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.5 |
dsxT1E1IfIetfStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.3174.2.7.1.2.1.3.5 |
dsxT1E1IfIetfCurrentStatsTableA list of T1/E1 interface test status entries SEQUENCE OF DsxT1E1IfIetfCurrentStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1 |
dsxT1E1IfIetfCurrentStatsEntryAn entry containing status entry for each currently active
T1/E1 interface. DsxT1E1IfIetfCurrentStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1 |
dsxT1E1IfIetfCurrentStatsUASStateThe number of seconds that have elapsed
since the beginning of the IETF current
error-measurement period.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.1 |
dsxT1E1IfIetfCurrentStatsTimeInCurrentThe number of seconds that have elapsed
since the beginning of the IETF current
error-measurement period.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.2 |
dsxT1E1IfIetfCurrentStatsESThe number of IETF Errored Seconds encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.3 |
dsxT1E1IfIetfCurrentStatsSESThe number of Far End Severely Errored Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.4 |
dsxT1E1IfIetfCurrentStatsSEFSThe number of IETF Severely Errored Framing
Seconds encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.5 |
dsxT1E1IfIetfCurrentStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.6 |
dsxT1E1IfIetfCurrentStatsCSSThe number of IETF Controlled Slip Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.7 |
dsxT1E1IfIetfCurrentStatsPCVThe number of IETF Path Coding Violations
reported via the far end block error count en-
countered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.8 |
dsxT1E1IfIetfCurrentStatsLESThe number of IETF Line Errored Seconds en-
countered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.9 |
dsxT1E1IfIetfCurrentStatsBESThe number of Bursty Errored Seconds (BESs)
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.10 |
dsxT1E1IfIetfCurrentStatsDMThe number of Degraded Minutes (DMs) encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.11 |
dsxT1E1IfIetfCurrentStatsLCVInvoke the configured test.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.12 |
dsxT1E1IfIetfTotalStatsTableA list of T1/E1 interface test status entries SEQUENCE OF DsxT1E1IfIetfTotalStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2 |
dsxT1E1IfIetfTotalStatsEntryAn entry containing status entry for each currently active
T1/E1 interface. DsxT1E1IfIetfTotalStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1 |
dsxT1E1IfIetfTotalStatsESThe number of IETF Errored Seconds encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.1 |
dsxT1E1IfIetfTotalStatsSESThe number of IETF Severely Errored Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.2 |
dsxT1E1IfIetfTotalStatsSEFSThe number of IETF Severely Errored Framing
Seconds encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.3 |
dsxT1E1IfIetfTotalStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.4 |
dsxT1E1IfIetfTotalStatsCSSThe number of IETF Controlled Slip Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.5 |
dsxT1E1IfIetfTotalStatsPCVThe number of IETF Path Coding Violations
reported via the far end block error count en-
countered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.6 |
dsxT1E1IfIetfTotalStatsLESThe number of IETF Line Errored Seconds en-
countered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.7 |
dsxT1E1IfIetfTotalStatsBESThe number of Bursty Errored Seconds (BESs)
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.8 |
dsxT1E1IfIetfTotalStatsDMThe number of Degraded Minutes (DMs) encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.9 |
dsxT1E1IfIetfTotalStatsLCVInvoke the configured test.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.10 |
dsxT1E1IfIetfArchiveStatsTableA list of T1/E1 interface test status entries SEQUENCE OF DsxT1E1IfIetfArchiveStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3 |
dsxT1E1IfIetfArchiveStatsEntryAn entry containing status entry for each currently active
T1/E1 interface. DsxT1E1IfIetfArchiveStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1 |
dsxT1E1IfIetfArchiveStatsIntervalThe number of seconds that have elapsed
since the beginning of the IETF current
error-measurement period. Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.1 |
dsxT1E1IfIetfArchiveStatsESThe number of IETF Errored Seconds encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.2 |
dsxT1E1IfIetfArchiveStatsSESThe number of IETF Severely Errored Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.3 |
dsxT1E1IfIetfArchiveStatsSEFSThe number of IETF Severely Errored Framing
Seconds encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.4 |
dsxT1E1IfIetfArchiveStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.5 |
dsxT1E1IfIetfArchiveStatsCSSThe number of IETF Controlled Slip Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.6 |
dsxT1E1IfIetfArchiveStatsPCVThe number of IETF Path Coding Violations
reported via the far end block error count en-
countered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.7 |
dsxT1E1IfIetfArchiveStatsLESThe number of IETF Line Errored Seconds en-
countered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.8 |
dsxT1E1IfIetfArchiveStatsBESThe number of Bursty Errored Seconds (BESs)
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.9 |
dsxT1E1IfIetfArchiveStatsDMThe number of Degraded Minutes (DMs) encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.10 |
dsxT1E1IfIetfArchiveStatsLCVInvoke the configured test.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.11 |
dsxT1E1IfUserStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.3174.2.7.1.2.1.3.6 |
dsxT1E1IfUserCurrentStatsTableA list of T1/E1 interface test status entries SEQUENCE OF DsxT1E1IfUserCurrentStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1 |
dsxT1E1IfUserCurrentStatsEntryAn entry containing status entry for each currently active
T1/E1 interface. DsxT1E1IfUserCurrentStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1 |
dsxT1E1IfUserCurrentStatsUASStateCurrent state of availablity of T1/E1 interfacero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1.1 |
dsxT1E1IfUserCurrentStatsTimeInCurrentThe number of seconds that have elapsed
since the beginning of the IETF current
error-measurement period.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1.2 |
dsxT1E1IfUserCurrentStatsEEVInvoke the configured test.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1.3 |
dsxT1E1IfUserCurrentStatsESThe number of Errored Seconds encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1.4 |
dsxT1E1IfUserCurrentStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1.5 |
dsxT1E1IfUserCurrentStatsBESThe number of Bursty Errored Seconds (BESs)
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1.6 |
dsxT1E1IfUserCurrentStatsSESThe number of Severely Errored Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1.7 |
dsxT1E1IfUserCurrentStatsLOFCCount of loss of frames.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1.8 |
dsxT1E1IfUserCurrentStatsCSSThe number of Controlled Slip Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1.9 |
dsxT1E1IfUserCurrentStatsBPVThe number of Bipolar Violation Error Event occurred
for this interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1.10 |
dsxT1E1IfUserCurrentStatsOOFThe number of Out of Frame Defect occurred for this
interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1.11 |
dsxT1E1IfUserCurrentStatsCRCThe number of CRC Defects that occurred for this interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.1.1.12 |
dsxT1E1IfUserTotalStatsTableA list of T1/E1 interface test status entries SEQUENCE OF DsxT1E1IfUserTotalStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2 |
dsxT1E1IfUserTotalStatsEntryAn entry containing status entry for each currently active
T1/E1 interface. DsxT1E1IfUserTotalStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2.1 |
dsxT1E1IfUserTotalStatsDayTotal number of days elapsed since event recording
started for this interface. Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2.1.1 |
dsxT1E1IfUserTotalStatsEEVInvoke the configured test.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2.1.2 |
dsxT1E1IfUserTotalStatsESThe number of Errored Seconds encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2.1.3 |
dsxT1E1IfUserTotalStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2.1.4 |
dsxT1E1IfUserTotalStatsBESThe number of Bursty Errored Seconds (BESs)
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2.1.5 |
dsxT1E1IfUserTotalStatsSESThe number of Severely Errored Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2.1.6 |
dsxT1E1IfUserTotalStatsLOFCCount of loss of frames.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2.1.7 |
dsxT1E1IfUserTotalStatsCSSThe number of Controlled Slip Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2.1.8 |
dsxT1E1IfUserTotalStatsBPVThe number of Bipolar Violation Error Event occurred
for this interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2.1.9 |
dsxT1E1IfUserTotalStatsOOFThe number of Out of Frame Defect occurred for this
interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2.1.10 |
dsxT1E1IfUserTotalStatsCRCThe number of Out of Frame Defect occurred for this
interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.2.1.11 |
dsxT1E1IfUserLifetimeStatsTableTable maintained to keep the statistics for the whole lifetime
of the system since it is first powered on. SEQUENCE OF DsxT1E1IfUserLifetimeStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.3 |
dsxT1E1IfUserLifetimeStatsEntryAn entry containing status entry for each currently active
T1/E1 interface. DsxT1E1IfUserLifetimeStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.3.1 |
dsxT1E1IfUserLifetimeStatsEEVThe Total number of Error Events occured during since the system brought upro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.3.1.1 |
dsxT1E1IfUserLifetimeStatsESThe number of Errored Seconds encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.3.1.2 |
dsxT1E1IfUserLifetimeStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.3.1.3 |
dsxT1E1IfUserLifetimeStatsBESThe number of Bursty Errored Seconds (BESs)
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.3.1.4 |
dsxT1E1IfUserLifetimeStatsSESThe number of Severely Errored Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.3.1.5 |
dsxT1E1IfUserLifetimeStatsLOFCCount of loss of frames.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.3.1.6 |
dsxT1E1IfUserLifetimeStatsCSSThe number of Controlled Slip Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.3.1.7 |
dsxT1E1IfUserLifetimeStatsBPVThe number of Bipolar Violation Error Event occurred
for this interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.3.1.8 |
dsxT1E1IfUserLifetimeStatsOOFThe number of Out of Frame Defect occurred for this
interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.3.1.9 |
dsxT1E1IfUserLifetimeStatsCRCThe number of Out of Frame Defect occurred for this
interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.3.1.10 |
dsxT1E1IfUserArchiveStatsTableThe table maintained to keep last 24 hrs statistics in SEQUENCE OF DsxT1E1IfUserArchiveStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4 |
dsxT1E1IfUserArchiveStatsEntryAn entry containing status entry for each currently active
T1/E1 interface. DsxT1E1IfUserArchiveStatsEntry .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4.1 |
dsxT1E1IfUserArchiveStatsIntervalThe number of seconds that have elapsed
since the beginning of the IETF current
error-measurement period. Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4.1.1 |
dsxT1E1IfUserArchiveStatsEEVError Events collected over each period of 15 minsro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4.1.2 |
dsxT1E1IfUserArchiveStatsESThe number of Errored Seconds encoun-
tered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4.1.3 |
dsxT1E1IfUserArchiveStatsUASThe number of Unavailable Seconds encountered
by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4.1.4 |
dsxT1E1IfUserArchiveStatsBESThe number of Bursty Errored Seconds (BESs)
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4.1.5 |
dsxT1E1IfUserArchiveStatsSESThe number of Severely Errored Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4.1.6 |
dsxT1E1IfUserArchiveStatsLOFCCount of loss of frames.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4.1.7 |
dsxT1E1IfUserArchiveStatsCSSThe number of Controlled Slip Seconds
encountered by a T1/E1 interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4.1.8 |
dsxT1E1IfUserArchiveStatsBPVThe number of Bipolar Violation Error Event occurred
for this interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4.1.9 |
dsxT1E1IfUserArchiveStatsOOFThe number of Out of Frame Defect occurred for this
interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4.1.10 |
dsxT1E1IfUserArchiveStatsCRCThe number of Out of Frame Defect occurred for this
interface.ro Unsigned32 .1.3.6.1.4.1.3174.2.7.1.2.1.3.6.4.1.11 |
dsxT1E1Traps OBJECT IDENTIFIER .1.3.6.1.4.1.3174.2.7.1.2.2 |
dsxT1E1AlarmOnTrapT1/E1 interface alarm traps for the Alarm On state. TRAP-TYPE .1.3.6.1.4.1.3174.2.7.1.2.2.0.1 |
dsxT1E1AlarmOffTrapT1/E1 interface alarm trap for the Alarm Off state. TRAP-TYPE .1.3.6.1.4.1.3174.2.7.1.2.2.0.2 |
dsxT1E1TrapVariables OBJECT IDENTIFIER .1.3.6.1.4.1.3174.2.7.1.2.2.1 |
dsxT1E1NumberThis is the T1/E1 number of the interface from where this
alarm is originating. INTEGER .1.3.6.1.4.1.3174.2.7.1.2.2.1.1 |
dsxT1E1TypeThis variable indicates whether this T1/E1 interface is with in a
T3/E3 or by itself. Enumeration .1.3.6.1.4.1.3174.2.7.1.2.2.1.2 |
dsxT1E1T3NumberThis variable is applicable only if dsxT1E1Type is
'type_t1_within_ct3' and it indicates the T3/E3 interface
number this T1 belongs to. INTEGER .1.3.6.1.4.1.3174.2.7.1.2.2.1.3 |
dsxT1E1AlarmTypeStatus of alarms for the T1/E1 interface
RRAI - Recieve RAI (Recieve Alarm Indication),
RLOS - Recieve Loss Of Sync,
REXZ - Recieve Excessive Zeros,
LORC - Loss Of Receive Clock (LORC),
TPDE - transmit pulse density,
TAIS - Transmit Alarm Indication Signal,
RAIS - Recieve Alarm Indication Signal,
RLOF - Recieve Loss Of Frame.
RFBE - Recieve Frame Bit Error,
ROOF - Recieve Out Of Frame,
TRAI - Transmit RAI (Recieve Alarm Indication),
Threshold 1-10 : TRUE if it is configured. Enumeration .1.3.6.1.4.1.3174.2.7.1.2.2.1.4 |