TIARA-FR-MIB
AI MIB Summary
The TIARA-FR-MIB enables monitoring and management of Frame Relay interfaces, virtual circuits, and associated traffic statistics on Tiara Network Inc. hardware. It provides specific counters for PVC status, data transmission errors, and bandwidth utilization to facilitate troubleshooting of legacy WAN connectivity.
This file contains Tiara Network Inc. specific MIB module for Frame Relay implementation.
Main OID:
tiaraFrMib.1.3.6.1.4.1.3174.2.16
106
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
106 total| Object Name |
|---|
tiaraFrMibThis file contains Tiara Network Inc. specific MIB
module for Frame Relay implementation. MODULE-IDENTITY .1.3.6.1.4.1.3174.2.16 |
frTableA list of a Frame Relay interface configuration parameters.
The table contains parameters for both the uni and multi
link frame-relay interface. SEQUENCE OF FrTableEntry .1.3.6.1.4.1.3174.2.16.1 |
frTableEntryAn entry in the frTable.
The bundle Id forms the index into the table. FrTableEntry .1.3.6.1.4.1.3174.2.16.1.1 |
frIfEnableEnables or disables the frame-relay interface. By
default frame- relay interface is enabled. Writing
zero (0) disables frame-relay interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3174.2.16.1.1.1 |
frEnablePvcAllEnables all PVCs related to the interface. By default all
PVCs related to an interface are disabled. Writing One (1)
enables all PVCs at the same time for an interface indexed
by bundleId.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3174.2.16.1.1.2 |
frFrameSizeMaximum Size of the frame that will be configured for
this Frame Relay interface. The value for frame size
ranges from 56 to 4096 bytes, with a default value of
1600 bytes.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.3 |
frIfTypeIndicates the interface type for the frame-relay
interface.rw Enumeration .1.3.6.1.4.1.3174.2.16.1.1.4 |
frLmiTypeLocal management Interface type for the frame-relay
interface.
It can take any of the following three values:
ansi - ANSI T1.617 (Annex D),
cisco - Cisco LMI,
q933a - ITU-T Q.933 (Annex A)
To disable lmi operation, set the value to none(0).rw Enumeration .1.3.6.1.4.1.3174.2.16.1.1.5 |
frLmiDceN392DCE/UNI error threshold value. Ranges from 1 to 10,
with a default value of 9. To configure the value
of this variable, LMI type should be configured.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.6 |
frLmiDceN393DCE/UNI monitored events count. Ranges from 1 to 10,
with a default value of 10. To configure the value
of this variable, LMI type should be configured.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.7 |
frLmiDteN392DTE/UNI error threshold. Ranges from 1 to 10, with a
default value of 9. To configure the value of this
variable, LMI type should be configured.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.8 |
frLmiDteN393DTE/UNI monitored events count. Ranges from 1 to 10,
with a default value of 10. To configure the value
of this variable, LMI type should be configured.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.9 |
frLmiDteN391DTE/UNI full status polling interval. Ranges from 1
to 255, with a default value of 6. To configure the
value of this variable, LMI type should be configured.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.10 |
frLmiKeepaliveLocal management interface keepalive polling interval
time in seconds. The value for this ranges from 5
seconds to 255 seconds with a default value of 10
seconds. To configure the value of this variable,
LMI type should be configured.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.11 |
mfrAckMsgTimerThe time to wait for an ADD_LINK_ACK message
before timing out.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.12 |
mfrAckMsgMaxRetryMaximum number of Retries for the Ack Msg. This
variable can be set on a multilink bundle.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.13 |
mfrClassclassA
classB
classC
are UP.
In the case of classC, mfrClassThreshold should be
configured with mfrClass in an atomic set operation.
This variable can be set on a multilink bundle but
not on a uni link bundle.rw Enumeration .1.3.6.1.4.1.3174.2.16.1.1.14 |
mfrClassThresholdThreshold - minimum number of links required to
activate bundle, for a mfrClass, classC. This
variable can be set on a multilink bundle but not
on a uni link bundle.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.15 |
mfrFrameSizeThe frame size for multi-link frame relay. This
variable can be set on a multilink bundle but not
on a uni link bundle.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.16 |
mfrHelloTimerHello timer in seconds. This variable can be set
on a multilink bundle but not on a uni link bundle.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.17 |
mfrSegThresholdSegment threshold packet size in bytes. This variable
can be set on a multilink bundle but not on a uni link
bundle.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.18 |
mfrDiffDelayDifferential delay in milli seconds. This variable
can be set on a multilink bundle but not on a uni
link bundle.rw Integer32 .1.3.6.1.4.1.3174.2.16.1.1.19 |
frPvcTableA list of Frame Relay PVC parameters. SEQUENCE OF FrPvcTableEntry .1.3.6.1.4.1.3174.2.16.2 |
frPvcTableEntryAn entry in the frPvcTable FrPvcTableEntry .1.3.6.1.4.1.3174.2.16.2.1 |
frPvcDlciData Link Connection Identifier of the PVC. The value
ranges from 16 to 991. The Dlci is unique for a bundle
but Dlci numbers can be reused across bundles. Integer32 .1.3.6.1.4.1.3174.2.16.2.1.1 |
frPvcEnableEnables PVC for given interface name and DLCI number. By
default PVC is disabled. Writing one(1) on this enables
PVC.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3174.2.16.2.1.2 |
frPvcDescrDescription for the configured PVC.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3174.2.16.2.1.3 |
frPvcIpAddrIP address to be configured for the PVC.
PVC IP subnet Mask variable should also be configured
alongwith this variable. A set on this variable will be
successful only if the subnetmask is also set in the
same request. To unconfigure the Ip address, a set is
issued with the value of the ip address as 0.0.0.0rw IpAddress .1.3.6.1.4.1.3174.2.16.2.1.4 |
frPvcIpSubnetMaskSubnet mask to be configured alongwith PVC IP address.
This variable should be configured alongwith PVC IP
address.rw IpAddress .1.3.6.1.4.1.3174.2.16.2.1.5 |
frPvcSrcForwardingPrimarySource forwarding IP address to be configured for PVC. To
unconfigure the source forwarding address, a set is issued
with the value of the address as 0.0.0.0. This is the
primary source forwarding addressrw IpAddress .1.3.6.1.4.1.3174.2.16.2.1.6 |
frPvcSrcForwardingSecondaryOptional secondary source forwarding address configured
for PVC, using alternate ethernet as backup. This
variable should be configured along with the PVC primary
source forwarding address. To unconfigure the secondary
forwarding address, a set is issued with the value of
the primary source forwarding address as 0.0.0.0, or
a primary source forwarding address is set only, or both
primary and secondary are set to 0.0.0.0rw IpAddress .1.3.6.1.4.1.3174.2.16.2.1.7 |
frPvcRemoteIpAddrRemote IP address to be mapped for PVCrw IpAddress .1.3.6.1.4.1.3174.2.16.2.1.8 |
frPvcPolicingEnableThis variable is to disable/enable policing for PVC.
Writing zero (0) on this disables policing for the
PVC. By default policing is enabled.rw Enumeration .1.3.6.1.4.1.3174.2.16.2.1.9 |
frPvcPolicingDeIf enabled, received frames that exceed policing
threshold, will be tagged with DE bit. This variable
can be configured only if policing is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3174.2.16.2.1.10 |
frPvcPolicingCirCommitted Information Rate( bits per second )
in receive direction for PVC. This variable can be
configured only if policing is enabled.rw Integer32 UNITS "bps" .1.3.6.1.4.1.3174.2.16.2.1.11 |
frPvcPolicingBcCommitted Burst ( bits ) in receive direction for PVC.
This variable can be configured only if policing is
enabled.rw Integer32 UNITS "bps" .1.3.6.1.4.1.3174.2.16.2.1.12 |
frPvcPolicingBeExcess burst ( bits ) in receive direction for PVC. This
variable can be configured only if policing enabled.rw Integer32 .1.3.6.1.4.1.3174.2.16.2.1.13 |
frPvcShapingCirThe committed information rate (in bits per second) to be
configured for the PVC.rw Integer32 UNITS "bps" .1.3.6.1.4.1.3174.2.16.2.1.14 |
frPvcShapingBcMaxThe maximum committed burst (bits) to be configured
for the PVC.rw Integer32 UNITS "bps" .1.3.6.1.4.1.3174.2.16.2.1.15 |
frPvcShapingBcMinThe minimum committed burst (bits) to be configured
for the PVC.rw Integer32 UNITS "bps" .1.3.6.1.4.1.3174.2.16.2.1.16 |
frPvcShapingBeThe excess burst (bits) to be configured for the PVC.rw Integer32 .1.3.6.1.4.1.3174.2.16.2.1.17 |
frPvcDlciForSwitchingData Link Connection Identifier of the PVC. The
value for this variable ranges from 16 to 991.
frPvcBundleNameForSwitching should be set with
frPvcDlciForSwitching as an atomic set.rw Integer32 .1.3.6.1.4.1.3174.2.16.2.1.18 |
frPvcBundleNameForSwitchingThe name of the bundle configured for Switching.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3174.2.16.2.1.19 |
frPvcRowStatusTo create a row set row status to a value
CreateAndGo(4), indexed by bundle Id and the
desired dlci number.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3174.2.16.2.1.20 |
frStatsTableThe statistics objects for a frame-relay interface. SEQUENCE OF FrStatsTableEntry .1.3.6.1.4.1.3174.2.16.3 |
frStatsTableEntryAn entry in the frStatsTable. FrStatsTableEntry .1.3.6.1.4.1.3174.2.16.3.1 |
frStatsFramesRxNumbers of frames received.ro Counter32 .1.3.6.1.4.1.3174.2.16.3.1.1 |
frStatsInvFramesRxNumber of invalid frames receivedro Counter32 .1.3.6.1.4.1.3174.2.16.3.1.2 |
frStatsFECNsRxNumber of frames received with FECN bit onro Counter32 .1.3.6.1.4.1.3174.2.16.3.1.3 |
frStatsBECNsRxNumber of frames received with BECN bit on.ro Counter32 .1.3.6.1.4.1.3174.2.16.3.1.4 |
frStatsShortFramesRxNumber of short frames received.ro Counter32 .1.3.6.1.4.1.3174.2.16.3.1.5 |
frStatsLongFramesRxNumber of long frames received.ro Counter32 .1.3.6.1.4.1.3174.2.16.3.1.6 |
frStatsInvDLCIsRxNumber of frames with invalid dlci receivedro Counter32 .1.3.6.1.4.1.3174.2.16.3.1.7 |
frStatsUnknownDLCIsRxNumber of frames with unknown dlci receivedro Counter32 .1.3.6.1.4.1.3174.2.16.3.1.8 |
frStatsFramesTxNumber of frames transmitted.ro Counter32 .1.3.6.1.4.1.3174.2.16.3.1.9 |
frPvcStatsTableFR PVC Statistics Table SEQUENCE OF FrPvcStatsTableEntry .1.3.6.1.4.1.3174.2.16.4 |
frPvcStatsTableEntryAn entry in the FrPvcStats Table FrPvcStatsTableEntry .1.3.6.1.4.1.3174.2.16.4.1 |
frPvcStatsBytesRxLastBootOrClearNumber of bytes received on a pvc since
boot or last statistics clear.ro Counter32 .1.3.6.1.4.1.3174.2.16.4.1.1 |
frPvcStatsBytesTxLastBootOrClearNumber of bytes transmitted on a pvc since
boot or last statistics clear.ro Counter32 .1.3.6.1.4.1.3174.2.16.4.1.2 |
frPvcStatsPktsRxLastBootOrClearNumber of packets received since boot
or last statistics clear.ro Counter32 .1.3.6.1.4.1.3174.2.16.4.1.3 |
frPvcStatsPktsTxLastBootOrClearNumber of packets transmitted since boot
or last statistics clear.ro Counter32 .1.3.6.1.4.1.3174.2.16.4.1.4 |
frPvcStatsErrPktsRxLastBootOrClearNumber of errored packets received since
boot or last statistics clear.ro Counter32 .1.3.6.1.4.1.3174.2.16.4.1.5 |
frPvcStatsUpDownStatesLastBootOrClearNumber of times state(up or down) of
the pvc changed in since boot or last
statistics clear.ro Counter32 .1.3.6.1.4.1.3174.2.16.4.1.6 |
frPvcStatsBytesRxLastFiveMinsNumber of bytes received in the last
five minutes.ro Counter32 .1.3.6.1.4.1.3174.2.16.4.1.7 |
frPvcStatsBytesTxLastFiveMinsNumber of bytes transmitted in the last
five minutes.ro Counter32 .1.3.6.1.4.1.3174.2.16.4.1.8 |
frPvcStatsPktsRxLastFiveMinsNumber of packets received in the last
five minutes.ro Counter32 .1.3.6.1.4.1.3174.2.16.4.1.9 |
frPvcStatsPktsTxLastFiveMinsNumber of packets transmitted in the last
five minutes.ro Counter32 .1.3.6.1.4.1.3174.2.16.4.1.10 |
frPvcStatsErrPktsRxLastFiveMinsNumber of errored packets received in the
last five minutes.ro Counter32 .1.3.6.1.4.1.3174.2.16.4.1.11 |
frPvcStatsUpDownStatesLastFiveMinsNumber of times state(up or down) of
the pvc changed in the last five
minutes.ro Counter32 .1.3.6.1.4.1.3174.2.16.4.1.12 |
frAvcTableEnd-to-End MFR avc parameters are defined
in this table. SEQUENCE OF FrAvcTableEntry .1.3.6.1.4.1.3174.2.16.5 |
frAvcTableEntryavc parameter entries are listed in this
table. FrAvcTableEntry .1.3.6.1.4.1.3174.2.16.5.1 |
frAvcIdfrAvcId is the identifier of an avc. To
configure an avc, this parameter must be
used as the index. This is assigned internally
by the Tiara system. Whenever a row creation
needs to occur in the avcTable, the
frAvcId is entered as 65535. INTEGER .1.3.6.1.4.1.3174.2.16.5.1.1 |
frAvcDlciData Link Connection Identifier of the avc. The value
ranges from 16 to 1022. This number is unique across
all the avcs created. Once set during creation,
it can't be changed.rw Integer32 .1.3.6.1.4.1.3174.2.16.5.1.2 |
frAvcNameName of the avc. To configure an avc,
this parameter must be set. That is, a
descriptive name should be given to an avc.
The maximum length of an avc name is 8
characters. This parameter is set once during
the creation of an avc. an avc can not be
renamed.rw DisplayString .1.3.6.1.4.1.3174.2.16.5.1.3 |
frAvcDescrBrief description of the avc. The maximum
length of this parameter is 25 characters.rw DisplayString .1.3.6.1.4.1.3174.2.16.5.1.4 |
frAvcIpAddrThe avc's source IP address. This is one
of the parameters required to set up IP
multiplexing for an avc. Also the parameters
avcIpAddr and avcSubnetMask have to be set
together during the same request. To unconfigure
the IP address, a set operation is performed with
the value 0.0.0.0rw IpAddress .1.3.6.1.4.1.3174.2.16.5.1.5 |
frAvcIpSubnetMaskThis parameter represents the source subnet
mask address. This is one of the parameters
required to set up IP multiplexing for a
avc. This parameter is set along with the
avcIpAddr parameter during the same
request.rw IpAddress .1.3.6.1.4.1.3174.2.16.5.1.6 |
frAvcSrcForwardingPrimaryThe avc's destination IP address. This is
one of the parameters required to set up IP
multiplexing for an avc. This parameter can
be configured when the avc has been
configured for IP multiplexing. To unconfigure
the source forwarding address, a set operation
is performed with the value 0.0.0.0. This is
the primary source forwarding addressrw IpAddress .1.3.6.1.4.1.3174.2.16.5.1.7 |
frAvcSrcForwardingSecondaryThe avc's secondary or backup destination
address. This address will be used only if
the primary address uses an ethernet interface
and failover is enabled on that interface and
the interface goes down. The secondary source
forwarding address is an optional parameter,
it should be a gateway on the alternate
ethernet This parameter is set along with the
primary source forwarding address parameter.
To unconfigure this parameter a set operation
is performed with the value 0.0.0.0 for the
primary address, or a primary address is set
with no secondary, or both primary and
secondary are set to 0.0.0.0rw IpAddress .1.3.6.1.4.1.3174.2.16.5.1.8 |
frAvcRemoteIpAddrRemote IP address to be mapped for the avc. If configured,
the arp table is updated with this static entry and
inverse arp request packets are no longer sent for this
interface.To unconfigure this parameter, a set operation
is performed with the value 0.0.0.0 .rw IpAddress .1.3.6.1.4.1.3174.2.16.5.1.9 |
frAvcClassclassA
classB
classC
classD
classE
In the case of classC/D/E, frAvcClassThreshold should be
configured along with avcClass in an atomic set operation.rw Enumeration .1.3.6.1.4.1.3174.2.16.5.1.10 |
frAvcClassThresholdThreshold - minimum number of links required to
activate bundle, for the avcClass 'classC'. For
'classD' or 'classE', the value will be in bits per second.
For 'classA' and 'classB', this value will hold no
significance.rw Integer32 .1.3.6.1.4.1.3174.2.16.5.1.11 |
frAvcFragmentSizeThe frame size for multi-link frame relay End-to-End avc in
bytes. This value defines the maximum size of any fragment
that can be transmitted on any cvc. Frames larger than this
size must be fragmented.rw Integer32 .1.3.6.1.4.1.3174.2.16.5.1.12 |
frAvcSegThresholdSegment threshold packet size in bytes. This value defines
the minimum size of any fragment that can be transmitted on
any cvc. Frames smaller than this size must not be fragmented.rw Integer32 .1.3.6.1.4.1.3174.2.16.5.1.13 |
frAvcSequencemultilink frame relay sequence number length (short = 12 bits ; long =
24 bits.24 bit sequence space increases MFR header by 2 more bytes, but
in those situations where the differential delay is high ( > 50 ms ),
larger sequence numbers help reduce packet drops that can happen when
short sequence numbers complete a cycle quickly.rw Enumeration .1.3.6.1.4.1.3174.2.16.5.1.14 |
frAvcNoOfCvcsIndicates the number of links configured in
the avc.ro Integer32 .1.3.6.1.4.1.3174.2.16.5.1.15 |
frAvcTotalBwIndicates the total bandwidth for this avc.
The avc bandwidth is the aggregated band-
widths of all the links assigned to a
particular avc.ro Integer32 UNITS "kbps" .1.3.6.1.4.1.3174.2.16.5.1.16 |
frAvcRowStatusfrAvcRowStatus is used to add/delete a row
in the table. Adding or deleting a row
corresponds to creating an avc or deleting
an avc. In order to add a row to the avc
table, a set on this parameter should be done
with the value 4 (createAndGo) and
frAvcId parameter set with the value of 65535.
A request to create a row can be
completed successfully only if a set on the
avcRowStatus and a set on the avcName
come in the same request. To delete a row
this parameter has to be set with the value 6
(destroy).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3174.2.16.5.1.17 |
frCvcTableEnd-to-End MFR cvc parameters are defined
in this table. SEQUENCE OF FrCvcTableEntry .1.3.6.1.4.1.3174.2.16.6 |
frCvcTableEntrycvc parameter entries are listed in this
table. FrCvcTableEntry .1.3.6.1.4.1.3174.2.16.6.1 |
frCvcDlciData Link Connection Identifier of the cvc. For End-to-End
MFR avc, to assign a Constituent Virtual Circuit for
aggregation, this CVC dlci is used in conjunction with
the cvcBundleName as an atomic set.rw Integer32 .1.3.6.1.4.1.3174.2.16.6.1.1 |
frCvcBundleNameThe name of the bundle of the CVC which needs to be added
to the avc. This parameter is used in confunction with the
frCvcDlci parameter as one atomic set operation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3174.2.16.6.1.2 |
frAvcStatsTableThe statistics objects for a frame-relay interface. SEQUENCE OF AvcStatsTableEntry .1.3.6.1.4.1.3174.2.16.7 |
frAvcStatsTableEntryAn entry in the frAvcStatsTable. AvcStatsTableEntry .1.3.6.1.4.1.3174.2.16.7.1 |
frAvcStatsBytesRxLastBootOrClearNumber of bytes received on an avc since
boot or last statistics clear.ro Counter32 .1.3.6.1.4.1.3174.2.16.7.1.1 |
frAvcStatsBytesTxLastBootOrClearNumber of bytes transmitted on an avc since
boot or last statistics clear.ro Counter32 .1.3.6.1.4.1.3174.2.16.7.1.2 |
frAvcStatsPktsRxLastBootOrClearNumber of packets received since boot
or last statistics clear.ro Counter32 .1.3.6.1.4.1.3174.2.16.7.1.3 |
frAvcStatsPktsTxLastBootOrClearNumber of packets transmitted since boot
or last statistics clear.ro Counter32 .1.3.6.1.4.1.3174.2.16.7.1.4 |
frAvcStatsErrPktsRxLastBootOrClearNumber of errored packets received since
boot or last statistics clear.ro Counter32 .1.3.6.1.4.1.3174.2.16.7.1.5 |
frAvcStatsUpDownStatesLastBootOrClearNumber of times state(up or down) of
the avc changed in since boot or last
statistics clear.ro Counter32 .1.3.6.1.4.1.3174.2.16.7.1.6 |
frAvcStatsBytesRxLastFiveMinsNumber of bytes received in the last
five minutes.ro Counter32 .1.3.6.1.4.1.3174.2.16.7.1.7 |
frAvcStatsBytesTxLastFiveMinsNumber of bytes transmitted in the last
five minutes.ro Counter32 .1.3.6.1.4.1.3174.2.16.7.1.8 |
frAvcStatsPktsRxLastFiveMinsNumber of packets received in the last
five minutes.ro Counter32 .1.3.6.1.4.1.3174.2.16.7.1.9 |
frAvcStatsPktsTxLastFiveMinsNumber of packets transmitted in the last
five minutes.ro Counter32 .1.3.6.1.4.1.3174.2.16.7.1.10 |
frAvcStatsErrPktsRxLastFiveMinsNumber of errored packets received in the
last five minutes.ro Counter32 .1.3.6.1.4.1.3174.2.16.7.1.11 |
frAvcStatsUpDownStatesLastFiveMinsNumber of times state(up or down) of
the avc changed in the last five
minutes.ro Counter32 .1.3.6.1.4.1.3174.2.16.7.1.12 |