TIARA-BUNDLE-MIB
AI MIB Summary
The TIARA-BUNDLE-MIB module enables the monitoring and configuration of logical bundle parameters, including member interface states, aggregation status, and traffic distribution metrics, within Cisco TIARA (Traffic Engineering) environments. It facilitates the management of link aggregation groups and traffic engineering tunnels by exposing specific object identifiers for bundle operational status and performance counters.
Bundle MIB for defining bundle parameters
Main OID:
tiaraBundleMib.1.3.6.1.4.1.3174.2.13
34
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
tiaraBundleMibBundle MIB for defining bundle parameters MODULE-IDENTITY .1.3.6.1.4.1.3174.2.13 |
bundleTableBundle management related
parameters are defined in this table. SEQUENCE OF BundleTableEntry .1.3.6.1.4.1.3174.2.13.1 |
bundleTableEntryBundle parameter entries are listed in this
table. BundleTableEntry .1.3.6.1.4.1.3174.2.13.1.1 |
bundleIdbundleId is the identifier of a bundle. To
configure a bundle, this parameter must be
used as the index. This is assigned internally
by the Tiara system. Whenever a row creation
needs to occur in the bundleTable, the
bundleId is entered as 65535. INTEGER .1.3.6.1.4.1.3174.2.13.1.1.1 |
bundleNameName of the bundle. To configure a bundle,
this parameter must be set. That is, a
descriptive name should be given to a bundle.
The maximum length of a bundle name is 8
characters. This parameter is set once during
the creation of a bundle. A bundle can not be
renamed.rw DisplayString .1.3.6.1.4.1.3174.2.13.1.1.2 |
bundleContactName of the person who can be contacted
for information about the bundle. The maximum
length for this parameter is 15 characters.
This parameter can be set after the bundle
is named and before the links are assigned.rw DisplayString .1.3.6.1.4.1.3174.2.13.1.1.3 |
bundleDescrBrief description of the bundle. The maximum
length of this parameter is 25 characters.
This parameter can be set after the bundle
is named and before the links are assigned.rw DisplayString .1.3.6.1.4.1.3174.2.13.1.1.4 |
bundleEncapsulationSpecifies the type of protocol encapsulation
for the bundle. To configure protocol-specific
parameters for a bundle, the bundle must first
be encapsulated with that protocol. To
unconfigure the encapsulation type, this
variable should be set to noEncap.rw Enumeration .1.3.6.1.4.1.3174.2.13.1.1.5 |
bundleDropEsThe length of time in seconds that the error
condition Errored Seconds exists before a link is
dropped. This parameter can be configured only
for multilink bundles and after the
bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.3174.2.13.1.1.6 |
bundleDropSesThe length of time in seconds that the error
condition Severely Errored Seconds exists
before a link is dropped. This parameter can
be configured only for multilink bundles and
after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.3174.2.13.1.1.7 |
bundleDropUasThe length of time in seconds that the error
condition Unavailable Seconds exists before a
link is dropped. This parameter can be
configured only for multilink bundles and
after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.3174.2.13.1.1.8 |
bundleIpAddrThe bundle's source IP address. This is one
of the parameters required to set up IP
multiplexing for a bundle. This parameter
can be configured only when the bundle is
encapsulated. Also the parameters bundleIpAddr
and bundleSubnetMask have to be set together
during the same request. To unconfigure the IP
address, a set operation is performed with
the value 0.0.0.0rw IpAddress .1.3.6.1.4.1.3174.2.13.1.1.9 |
bundleSubnetMaskThis parameter represents the source subnet
mask address. This is one of the parameters
required to set up IP multiplexing for a
bundle. This parameter is set along with the
bundleIpAddr parameter during the same
request.rw IpAddress .1.3.6.1.4.1.3174.2.13.1.1.10 |
bundleSrcForwardingAddrPrimaryThe bundle's destination IP address. This is
one of the parameters required to set up IP
multiplexing for a bundle. This parameter can
be configured when the bundle has been
configured for IP multiplexing. To unconfigure
the source forwarding address, a set operation
is performed with the value 0.0.0.0. This is
the primary source forwarding addressrw IpAddress .1.3.6.1.4.1.3174.2.13.1.1.11 |
bundleSrcForwardingAddrSecondaryThe bundle's secondary or backup destination
address. This address will be used only if
the primary address uses an ethernet interface
and failover is enabled on that interface and
the interface goes down. The secondary source
forwarding address is an optional parameter,
it should be a gateway on the alternate
ethernet This parameter is set along with the
primary source forwarding address parameter.
To unconfigure this parameter a set operation
is performed with the value 0.0.0.0 for the
primary address, or a primary address is set
with no secondary, or both primary and
secondary are set to 0.0.0.0rw IpAddress .1.3.6.1.4.1.3174.2.13.1.1.12 |
bundleRestoreMethodbundleRestoreMethod defines how a dropped
link of a multilink bundle will be restored.
It can be done either manually or
automatically. If the restore mode is
automatic, the parameter bundleLinkRestoralTime
should be set (in seconds) during the same
request.rw Enumeration .1.3.6.1.4.1.3174.2.13.1.1.13 |
bundleLinkRestoralTimeError-free time interval (in seconds) that
must pass before a link is automatically
restored. This parameter can be set when the
bundleRestoreMethod is automatic.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.3174.2.13.1.1.14 |
bundleStatusbundleStatus shutdowns the bundle. Although
the default is 'enable,' the bundle remains
disabled until all necessary parameters are
presentrw Enumeration .1.3.6.1.4.1.3174.2.13.1.1.15 |
bundleLinkRestorebundleLinkRestore specifies the links to be
restored manually. This parameter is configured
when the value of bundleRestoreMethod is manual.
The user needs to specify the link/s to be
restored. LSB in the OCTET STRING represents
T1 Number 1. For example, to restore links 1-4
the value should be set to 000Frw OCTET STRING .1.3.6.1.4.1.3174.2.13.1.1.16 |
bundleNoOfLinksIndicates the number of links configured in
the bundle.ro Integer32 .1.3.6.1.4.1.3174.2.13.1.1.17 |
bundleTotalBwIndicates the total bandwidth for this bundle.
The bundle bandwidth is the aggregated band-
widths of all the links assigned to a
particular bundle.ro Integer32 UNITS "kbps" .1.3.6.1.4.1.3174.2.13.1.1.18 |
bundleRowStatusbundleRowStatus is used to add/delete a row
in the table. Adding or deleting a row
corresponds to creating a bundle or deleting
a bundle. In order to add a row to the bundle
table, a set on this parameter should be done
with the value 4 (createAndGo) and
bundleId parameter set with the value of 65535.
A request to create a row can be
completed successfully only if a set on the
bundleRowStatus and a set on the bundleName
come in the same request. To delete a row
this parameter has to be set with the value 6
(destroy).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3174.2.13.1.1.19 |
bundleLinkTableAll the parameters related to the assigned
links of a bundle are defined in
bundleLinkTable. A row in this table can be
created when a bundle with the corresponding
bundleId already exists in the bundleTable. SEQUENCE OF BundleLinkEntry .1.3.6.1.4.1.3174.2.13.2 |
bundleLinkEntryLink parameters that relate to a
given bundle are specified in this table. BundleLinkEntry .1.3.6.1.4.1.3174.2.13.2.1 |
bundleLinkT1NumbundleLinkT1Num is the number of the T1 link
being added to a specific bundle. For example,
to assign link number 4, the value of this
parameter should be set to 4. However, the
design of SNMP's link creation is different
from that of the system CLI. In SNMP, only
one link can be created at a time whereas in
the system CLI, multiple links can be
configured in a single request. This parameter
is mandatory for row creation in the interfaces
with CT3 and T1 link types . Integer32 .1.3.6.1.4.1.3174.2.13.2.1.1 |
bundleLinkTimeSlotsbundleLinkTimeSlots indicates the DS0 channels
in a fractional T1 link. The LSB in the OCTET
STRING represents DS0 channel number 1. For
example, to assign DS0 channels 1-4, the value
of this parameter should be set to 000Frw OCTET STRING .1.3.6.1.4.1.3174.2.13.2.1.2 |
bundleLinkTypebundleLinkType specifies the interface type
(i.e., CT3, T1, T3, and HSSI) of the link
being assigned to the bundle. This is a
mandatory parameter for Row creation in the
bundleLinkTable.rw Enumeration .1.3.6.1.4.1.3174.2.13.2.1.3 |
bundleLinkSpeedThe bundleLinkSpeed specifies the transmission
speed of all DS0 channels in a bundle.rw Enumeration .1.3.6.1.4.1.3174.2.13.2.1.4 |
bundleLinkInvertedDataSetting bundleLinkInvertedData parameter to
true will have the system invert data on all
DS0 channels before transmission. Data
inversion is used only for HDLC-encapsulated
bundles.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3174.2.13.2.1.5 |
bundleLinkPhysIfNumbundleLinkPhysIfNum specifies the interface
number of the interface type such as CT3,
HSSI, T3 on which this link is being created.
This variable holds significance only for
link types CT3, HSSI and T3. It is a
mandatory variable for row creation for link
types CT3, HSSI, and T3.rw INTEGER .1.3.6.1.4.1.3174.2.13.2.1.6 |
bundleLinkDiffDelaybundleLinkDiffDelay specifies the maximum
differential delay allowed on the links in a
multilink bundle. If the packet delay on any
link exceeds the differential delay set for a
bundle, that link is dropped from the bundle.ro Integer32 UNITS "milli-seconds" .1.3.6.1.4.1.3174.2.13.2.1.7 |
bundleLinkBwbundleLinkBw indicates the bandwidth of the
link. The bandwidth of an individual link
depends upon its configuration. For example,
in a link of type T1, its bandwidth will
depend upon whether the link is a full T1 or
a fractional T1 consisting of 24 DS0 timeslots.ro Integer32 UNITS "kbps" .1.3.6.1.4.1.3174.2.13.2.1.8 |
bundleLinkStatusbundleLinkStatus indicates whether a
particular link in a bundle is up or down.
The link can go down due to various reasons
such as differential delay, a broken link,
or negotiation problems at the far end.ro Enumeration .1.3.6.1.4.1.3174.2.13.2.1.9 |
bundleLinkRowStatusbundleLinkRowStatus is used to add or delete
a row in the table. To create a row, this
parameter is set to value 4(createAndGo). To
delete a row, this parameter is set to a value
6(destroy).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3174.2.13.2.1.10 |