SURVEILLANCE-VLAN-MIB
AI MIB Summary
The SURVEILLANCE-VLAN-MIB facilitates the monitoring and management of VLAN configurations and traffic statistics specifically within enterprise-grade surveillance network devices. It exposes proprietary metrics related to video stream bandwidth utilization, port status, and VLAN membership states to enable granular control over security camera network segmentation.
The surveillance VLAN module MIB for the proprietary enterprise.
Main OID:
swSurveillanceVLANMIB.dlink-common-mgmt.102
30
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
30 total| Object Name |
|---|
swSurveillanceVLANMIBThe surveillance VLAN module MIB for the proprietary enterprise. MODULE-IDENTITY .dlink-common-mgmt.102 |
swSurveillanceVLANNotifications OBJECT IDENTIFIER .dlink-common-mgmt.102.0 |
swSurveillanceVLANMIBObjects OBJECT IDENTIFIER .dlink-common-mgmt.102.1 |
swSurveillanceVlanCtrl OBJECT IDENTIFIER .dlink-common-mgmt.102.1.1 |
swSurveillanceVlanIdThe VLAN ID of the surveillance VLAN. The surveillance VLAN is used to assign
VLANs for untagged video packets.
The value zero is for display only and not configurable, which
means there is no surveillance VLAN on the switch.rw VlanIdOrNone (Q-BRIDGE-MIB) .dlink-common-mgmt.102.1.1.1 |
swSurveillanceVlanGlobalStateThis object indicates the global status of the surveillance VLAN. If we
enable the surveillance VLAN, we should set the VID first.rw Enumeration .dlink-common-mgmt.102.1.1.2 |
swSurveillanceVlanPriorityThe priority for the surveillance VLAN, which is used to distinguish
the QoS of the surveillance traffic from data traffic.rw INTEGER .dlink-common-mgmt.102.1.1.3 |
swSurveillanceVlanAgingTimeThe aging time for the surveillance VLAN, which is used to remove a
port from a surveillance VLAN when the working mode is auto.rw INTEGER .dlink-common-mgmt.102.1.1.4 |
swSurveillanceVlanLogStateThis object indicates the surveillance VLAN log state.rw Enumeration .dlink-common-mgmt.102.1.1.5 |
swSurveillanceVlanInfo OBJECT IDENTIFIER .dlink-common-mgmt.102.1.2 |
swSurveillanceVlanMemberPortlistThe surveillance VLAN's member ports.ro PortList (Q-BRIDGE-MIB) .dlink-common-mgmt.102.1.2.1 |
swSurveillanceVlanDynamicPortlistThe surveillance VLAN's member ports that dynamically joined the surveillance
VLAN from a learned surveillance device.ro PortList (Q-BRIDGE-MIB) .dlink-common-mgmt.102.1.2.2 |
swSurveillanceVlanDeviceTableThe management information of a surveillance VLAN member port's device. SEQUENCE OF SwSurveillanceVlanDeviceEntry .dlink-common-mgmt.102.1.2.3 |
swSurveillanceVlanDeviceEntryThe information from the surveillance device connected to the switch. SwSurveillanceVlanDeviceEntry .dlink-common-mgmt.102.1.2.3.1 |
swSurveillanceVlanDevPortThe surveillance device's connected port.ro INTEGER .dlink-common-mgmt.102.1.2.3.1.1 |
swSurveillanceVlanDevAddrThe surveillance device's MAC address.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.102.1.2.3.1.2 |
swSurveillanceVlanDevComponentTypeThe surveillance device's component type.rw Enumeration .dlink-common-mgmt.102.1.2.3.1.3 |
swSurveillanceVlanDevStartTimeThe time the surveillance device first connected to the switch.ro DateAndTime (SNMPv2-TC) .dlink-common-mgmt.102.1.2.3.1.4 |
swSurveillanceVlanMgmt OBJECT IDENTIFIER .dlink-common-mgmt.102.1.3 |
swSurveillanceVlanOuiTableThe management information of the surveillance VLAN OUI. SEQUENCE OF SwSurveillanceVlanOuiEntry .dlink-common-mgmt.102.1.3.1 |
swSurveillanceVlanOuiEntryThe management information of the OUI of a surveillance VLAN domain.
An OUI contains information about the type of IP phone that can make use of the OUI
to check the surveillance traffic. SwSurveillanceVlanOuiEntry .dlink-common-mgmt.102.1.3.1.1 |
swSurveillanceVlanOuiAddrThe address of the OUI referring to this swSurveillanceVlanOuiEntry.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.102.1.3.1.1.1 |
swSurveillanceVlanOuiMaskThe OUI mask indicates the valid bit of the OUI address.rw MacAddress (SNMPv2-TC) .dlink-common-mgmt.102.1.3.1.1.2 |
swSurveillanceVlanOuiComponentTypeThe Component type of the OUI.rw Enumeration .dlink-common-mgmt.102.1.3.1.1.3 |
swSurveillanceVlanOuiDesThe description of the OUI.(0-32)rw DisplayString (SNMPv2-TC) .dlink-common-mgmt.102.1.3.1.1.4 |
swSurveillanceVlanOuiRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.102.1.3.1.1.5 |
swSurveillanceVlanPortTableThe management of the surveillance VLAN function on all bridge ports. Some ports
are not member ports of a surveillance VLAN, but they may be added in auto mode.
Therefore, this function enables both current surveillance VLAN member ports and
non-VLAN member ports to be managed. SEQUENCE OF SwSurveillanceVlanPortEntry .dlink-common-mgmt.102.1.3.2 |
swSurveillanceVlanPortEntryThe management of the surveillance VLAN function on ports SwSurveillanceVlanPortEntry .dlink-common-mgmt.102.1.3.2.1 |
swSurveillanceVlanPortNumberBridge ports can be configured with surveillance VLAN function.ro INTEGER .dlink-common-mgmt.102.1.3.2.1.1 |
swSurveillanceVlanPortStateThe port state here indicates whether the port supports the surveillance
VLAN function. We can enable/disable the surveillance VLAN function on the
port.rw Enumeration .dlink-common-mgmt.102.1.3.2.1.2 |