SUBAGENT-MIB
AI MIB Summary
The SUBAGENT-MIB defines the standard management interface for SNMP subagents, enabling the monitoring of registered agent variables and the configuration of subagent registration states to extend the management capabilities of a primary SNMP agent.
The MIB module describing SNMP subagents.
Main OID:
saMIB.1.3.6.1.4.1.2.4.12
35
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
ibmResearch OBJECT IDENTIFIER .1.3.6.1.4.1.2.4 |
saMIBThe MIB module describing SNMP subagents. MODULE-IDENTITY .1.3.6.1.4.1.2.4.12 |
saDefaultTimeoutThe default timeout (in seconds) that this agent
waits for a response from a SubAgent. This value
is used if a timeout value is not specified for
the subtree nor for the subagent that exports
the subtree.rw Integer32 -- (1..max-timeout) UNITS "seconds" .1.3.6.1.4.1.2.4.12.1 |
saMaxTimeoutThe maximum timeout (in seconds) that this agent
allows for timeout values for SubAgents. When you
try to set any other timeout value it must be
between 1 and this maximum value.rw INTEGER .1.3.6.1.4.1.2.4.12.2 |
saAllowDuplicateIDsControls if multiple instances of a sub-agent (as
identified by the sub-agent Identifier) are allowed.
Setting this object to the value no(2) will prevent
(new) duplicate sub-agentIDs. However, if any
duplicates exist at that point in time, the agent
will not remove them. That is considered a manager
responsibility.rw Enumeration .1.3.6.1.4.1.2.4.12.3 |
saNumberThe number of entries in the saTablero Counter32 .1.3.6.1.4.1.2.4.12.4 |
saAllPacketsInA count of packets received from all subagents.ro Counter32 .1.3.6.1.4.1.2.4.12.5 |
saAllPacketsOutA count of packets send to all subagents.ro Counter32 .1.3.6.1.4.1.2.4.12.6 |
saTableThe SubAgent table, listing all subagents. SEQUENCE OF SaEntry .1.3.6.1.4.1.2.4.12.7 |
saEntryAn entry in the SubAgnet table. SaEntry .1.3.6.1.4.1.2.4.12.7.1 |
saIndexAn index which uniquely identifies a SubAgent.
The value must remain constant at least from one
re-initialization of the entity's network
management system to the next re-initialization. INTEGER .1.3.6.1.4.1.2.4.12.7.1.1 |
saIdentifierThe authoritative identification for a SubAgent.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2.4.12.7.1.2 |
saDescriptionA descriptive name for a SubAgent.ro DisplayString .1.3.6.1.4.1.2.4.12.7.1.3 |
saStatusThe status of the SubAgent.
The only value that can be set is invalid(2).
This can only be done if the status is not already
in a ClosedSomething status. (Note: it is OK for
an agent to accept a SET that would set the value
to exactly the same value as the current status).
Setting this object to the value invalid(2) has
the effect of invalidating the entry upon which
the agent will close the connection and turn it
to status closedByManager(5).
It is an implementation specific matter if an
entry that is not valid(1) is removed from the
table right away, after some period of time or
not at all.rw Enumeration .1.3.6.1.4.1.2.4.12.7.1.4 |
saStatusChangeTimeThe timestamp of the last status change of the
SubAgent.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.4.12.7.1.5 |
saProtocolThe SubAgent protocol being used.ro Enumeration .1.3.6.1.4.1.2.4.12.7.1.6 |
saProtocolVersionThe version of the SubAgent Protocol used.ro INTEGER .1.3.6.1.4.1.2.4.12.7.1.7 |
saProtocolReleaseThe release of the SubAgent Protocol used.ro INTEGER .1.3.6.1.4.1.2.4.12.7.1.8 |
saTransportThe transport protocol used by the SubAgent.ro Enumeration .1.3.6.1.4.1.2.4.12.7.1.9 |
saTransportAddressThe address of the subagent (transport specific
address information).ro OCTET STRING .1.3.6.1.4.1.2.4.12.7.1.10 |
saTimeoutThe default timeout (seconds) for a SubAgent
response. This value will be used if there is no
timeout value specified for a particular subtree.rw INTEGER .1.3.6.1.4.1.2.4.12.7.1.11 |
saMaxVarBindsMax varBinds this subagent accepts per request.ro INTEGER .1.3.6.1.4.1.2.4.12.7.1.12 |
saPacketsInA count of packets send to this subagent.ro Counter32 .1.3.6.1.4.1.2.4.12.7.1.13 |
saPacketsOutA count of packets send to this subagent.ro Counter32 .1.3.6.1.4.1.2.4.12.7.1.14 |
saTreeTableThe SubAgent tree table. SEQUENCE OF SaTreeEntry .1.3.6.1.4.1.2.4.12.8 |
saTreeEntryAn entry in the SubAgent tree table. SaTreeEntry .1.3.6.1.4.1.2.4.12.8.1 |
saTsubtreeThe MIB subtree being exported by the SubAgent. OBJECT IDENTIFIER .1.3.6.1.4.1.2.4.12.8.1.1 |
saTpriorityThe SubAgents Priority when exporting the MIB
subtree. The lower the value the better the
priority. INTEGER (0..'07fffffff'h) .1.3.6.1.4.1.2.4.12.8.1.2 |
saTindexThe SubAgent's identity (index into the saTable).ro INTEGER .1.3.6.1.4.1.2.4.12.8.1.3 |
saTstatusThe status of subtree exported by the SubAgent.
Setting this object to the value invalid(2) has
the effect of invalidating the entry.
It is an implementation specific matter if an
entry that is not valid(1) is removed from the
table.rw Enumeration .1.3.6.1.4.1.2.4.12.8.1.4 |
saTtimeoutThe timeout (in seconds) for objects in this
subtree. A value of zero (0) means that the
overall timeout value (as specified in the
saTableEntry for the SubAgent) will be used.rw INTEGER .1.3.6.1.4.1.2.4.12.8.1.5 |
saMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2.4.12.9 |
saMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2.4.12.9.1 |
saMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2.4.12.9.2 |