STN-ROUTER-MIB
Imported Objects
Objects
69 total| Object Name |
|---|
stnRouterThis MIB module describes managed objects of Spring Tide Networks virtual routers plus associated IP, PPP, and PPPOE interfaces. MODULE-IDENTITY .1.3.6.1.4.1.3551.2.7 |
stnRouterObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.7.1 |
stnRouterTableA list of router entries. SEQUENCE OF StnRouterEntry .1.3.6.1.4.1.3551.2.7.1.1 |
stnRouterEntryEntry contains information about a particular router. StnRouterEntry .1.3.6.1.4.1.3551.2.7.1.1.1 |
stnRouterIndexA sequence number that identifies a router entry in the table.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.1.1.1 |
stnRouterTypeThe router type.ro Enumeration .1.3.6.1.4.1.3551.2.7.1.1.1.2 |
stnRouterStateThe operational state of the router.ro OperationState .1.3.6.1.4.1.3551.2.7.1.1.1.3 |
stnRouterEngineIDThe engine to which this router is currently assigned.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.1.1.4 |
stnRouterHomeIpAddressThe Home IP address of this router.ro IpAddress .1.3.6.1.4.1.3551.2.7.1.1.1.5 |
stnRouterEnabledThe variable to indicate if this router is enabled.ro Enumeration .1.3.6.1.4.1.3551.2.7.1.1.1.6 |
stnRouterNameThe name of this router.ro DisplayString .1.3.6.1.4.1.3551.2.7.1.1.1.7 |
stnRouterUpTimeThe time (in hundredths of a second) since the router was last re-initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3551.2.7.1.1.1.8 |
stnRouterActiveSlotThe slot/module to which this router is currently assigned.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.1.1.9 |
stnRouterActiveCpuThe CPU to which this router is currently assigned.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.1.1.10 |
stnRouterConfiguredSlotThe configured slot/module for this router.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.1.1.11 |
stnRouterConfiguredCpuThe configured CPU for this router.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.1.1.12 |
stnRouterStandbySlotThe standby slot/module for this router.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.1.1.13 |
stnRouterStandbyCpuThe standby CPU for this router.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.1.1.14 |
stnRouterReassignOnFaultThe variable to indicate if this router should be reassigned if the module where to fail.ro Enumeration .1.3.6.1.4.1.3551.2.7.1.1.1.15 |
stnRouterServiceNameThe service to which this router belongs.ro DisplayString .1.3.6.1.4.1.3551.2.7.1.1.1.16 |
stnRouterServiceDomainThe service domain to which this router belongs.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.1.1.17 |
stnRouterDefaultPolicyActionAction to take when a packet does not match any policies.ro Enumeration .1.3.6.1.4.1.3551.2.7.1.1.1.18 |
stnSubnetInterfaceTableA list of sub-network interface entries. SEQUENCE OF StnSubnetInterfaceEntry .1.3.6.1.4.1.3551.2.7.1.2 |
stnSubnetInterfaceEntryEntry contains information about a particular sub-network interface. StnSubnetInterfaceEntry .1.3.6.1.4.1.3551.2.7.1.2.1 |
stnSubnetInterfaceIndexA sequence number that identifies a sub-network interface entry in the table.ro Unsigned32 .1.3.6.1.4.1.3551.2.7.1.2.1.1 |
stnSubnetInterfaceEnabledEnable or disable the sub-network interface.ro Enumeration .1.3.6.1.4.1.3551.2.7.1.2.1.2 |
stnSubnetInterfaceAddressThe IP address of this interface.ro IpAddress .1.3.6.1.4.1.3551.2.7.1.2.1.3 |
stnSubnetInterfaceMaskThe sub-network mask of this interface.ro IpAddress .1.3.6.1.4.1.3551.2.7.1.2.1.4 |
stnSubnetInterfaceVclidThe vcl ID associated with this sub-network interface.rodeprecated Integer32 .1.3.6.1.4.1.3551.2.7.1.2.1.5 |
stnSubnetInterfaceTypeThe interface type.ro InterfaceConnectionType .1.3.6.1.4.1.3551.2.7.1.2.1.6 |
stnSubnetInterfaceStateThe operational state of the sub-network interface.ro OperationState .1.3.6.1.4.1.3551.2.7.1.2.1.7 |
stnSubnetInterfaceRouterIndexThe router this sub-network interface is associated with.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.2.1.8 |
stnSubnetInterfaceLinkTypeIndicates the type of link the subnet interface is configured over.ro Enumeration .1.3.6.1.4.1.3551.2.7.1.2.1.9 |
stnSubnetInterfaceLinkInstanceThe instance of the configuration record for the link the subnet interface is configured over.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.2.1.10 |
stnSubnetInterfaceForcedNextHopThe IP address of the next hop router that all IP traffic received on this interface will be sent toro IpAddress .1.3.6.1.4.1.3551.2.7.1.2.1.11 |
stnSubnetInterfaceServiceNameThe service to which this interface belongs.ro DisplayString .1.3.6.1.4.1.3551.2.7.1.2.1.12 |
stnPppoeTableA list of PPPOE interface entries. SEQUENCE OF StnPppoeEntry .1.3.6.1.4.1.3551.2.7.1.3 |
stnPppoeEntryEntry contains information about a particular PPPOE interface. StnPppoeEntry .1.3.6.1.4.1.3551.2.7.1.3.1 |
stnPppoeIndexA sequence number that identifies a PPPOE interface entry in the table.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.3.1.1 |
stnPppoeTypeThe interface type.ro InterfaceConnectionType .1.3.6.1.4.1.3551.2.7.1.3.1.2 |
stnPppoeStateThe operational state of the PPPOE interface.ro OperationState .1.3.6.1.4.1.3551.2.7.1.3.1.3 |
stnPppoeVclidThe vcl ID associated with this PPPOE interface.rodeprecated Integer32 .1.3.6.1.4.1.3551.2.7.1.3.1.4 |
stnPppoeIfIndexThe ifindex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.3551.2.7.1.3.1.5 |
stnPppoeRouterIndexThe router this PPPOE interface is associated with.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.3.1.6 |
stnPppoeLinkTypeIndicates the type of link the PPPoE interface is configured over.ro Enumeration .1.3.6.1.4.1.3551.2.7.1.3.1.7 |
stnPppoeLinkInstanceThe instance of the configuration record for the link the PPPoE interface is configured over.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.3.1.8 |
stnPppTableA list of PPP interface entries. SEQUENCE OF StnPppEntry .1.3.6.1.4.1.3551.2.7.1.4 |
stnPppEntryEntry contains information about a particular session. StnPppEntry .1.3.6.1.4.1.3551.2.7.1.4.1 |
stnPppIndexA sequence number that identifies a PPP interface entry in the table.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.4.1.1 |
stnPppTypeThe interface type.ro InterfaceConnectionType .1.3.6.1.4.1.3551.2.7.1.4.1.2 |
stnPppStateThe operational state or the PPP interface.ro OperationState .1.3.6.1.4.1.3551.2.7.1.4.1.3 |
stnPppVclidThe vcl ID associated with this PPP interface.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.4.1.4 |
stnPppIfIndexThe ifindex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.3551.2.7.1.4.1.5 |
stnPppRouterIndexThe router this PPP interface is associated with.ro Integer32 .1.3.6.1.4.1.3551.2.7.1.4.1.6 |
stnRouterNAT OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.7.1.5 |
stnRouterVEI OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.7.1.6 |
stnRouterAtmVpn OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.7.1.7 |
stnRouterVimuxMpls OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.7.1.8 |
stnRouterVTI OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.7.1.9 |
stnRouterMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.7.2 |
stnRouterUpA stnRouterUp trap signifies that the agent entity has detected that the stnRouterState object in the STN-ROUTER-MIB has transitioned to the assigned(4) state for one of its routers. The generation of this trap can be controlled by the RouterUpTraps configuration object. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.100.0.26 |
stnRouterDownA stnRouterDown trap signifies that the agent entity has detected that the stnRouterState object in the STN-ROUTER-MIB has transitioned to the failedassign(7) or error(8) state for one of its routers. The generation of this trap can be controlled by the RouterDownTraps configuration object. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.100.0.27 |
stnRouterReassignedA stnRouterReassigned trap signifies that the agent entity has detected that the stnRouterState object in the STN-ROUTER-MIB has transitioned to the the assigned(1) state for one of its routers. The generation of this trap can be controlled by the RouterReassignedTraps configuration object. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.100.0.28 |
stnRouterReassignFailureA stnRouterReassignFailure trap signifies that the agent entity has detected that the stnRouterState object in the STN-ROUTER-MIB has transitioned to the failedassign(7) or error(8) state for one of its routers. The generation of this trap can be controlled by the RouterReassignFailureTraps configuration object. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.100.0.29 |
stnSubnetIfAssignFailureA stnSubnetIfAssignFailure trap signifies that the agent entity has detected that the stnSubnetInterfaceState object in the STN-ROUTER-MIB has transitioned to the failedassign(7) or error(8) state for one of its interfaces. The generation of this trap can be controlled by the stnEnableSubnetInterfaceTraps configuration object. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.100.0.30 |
stnConfigAuditRouterFailureA stnConfigAuditRouterFailure trap signifies that the agent entity has detected an inconsistency between an active and configured routers after a failover. The generation of this trap can be controlled by the CfgAuditRouterTraps configuration object. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.100.0.33 |
stnConfigAuditSubnetIfFailureA stnConfigAuditSubnetIfFailure trap signifies that agent entity has detected an inconsistency between an active and configured subnet interface after a failover. The generation of this trap can be controlled by the CfgAuditSubnetIfTraps configuration object. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.100.0.34 |
stnConfigAuditPppoeIfFailureA stnConfigAuditPppoeIfFailure trap signifies that agent entity has detected an inconsistency between an active and configured PPPOE interface after a failover. The generation of this trap can be controlled by the CfgAuditPppoeIfTraps configuration object. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.100.0.35 |
stnConfigAuditPppIfFailureA stnConfigAuditPppIfFailure trap signifies that agent entity has detected an inconsistency between an active and configured PPP interface after a failover. The generation of this trap can be controlled by the CfgAuditPppIfTraps configuration object. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.100.0.36 |
More MIBs from Spring Tide
Browse all Spring TideMIBs →The STN-POLICY-MIB module manages STN (Secure Transport Network) policy enforcement by exposing the stnPmClassTable to monitor and configure traffic classification and policy matching rules. This interface enables administrators to retrieve specific policy class attributes, including match criteria and associated actions, for granular control over network security and QoS enforcement.
STN-ATM-MIB provides management and monitoring capabilities for ATM (Asynchronous Transfer Mode) network interfaces and virtual circuits on STN (Sangoma) hardware, tracking critical performance metrics such as cell loss, cell delay, and interface status.
SNMP MIB module
The STN-AAA-MIB module enables monitoring and management of Spring Tide Networks authentication, authorization, and accounting (AAA) events, specifically tracking user session states, access control decisions, and accounting records for network access servers.
SNMP MIB module
The STN-CHASSIS-MIB provides SNMP-managed objects for monitoring Spring Tide Networks chassis hardware status, including physical port states, power supply conditions, fan module health, and environmental sensor readings. This module enables centralized visibility into the physical layer integrity and operational state of the chassis infrastructure.