STN-POLICY-MIB
AI MIB Summary
The STN-POLICY-MIB module manages STN (Secure Transport Network) policy enforcement by exposing the stnPmClassTable to monitor and configure traffic classification and policy matching rules. This interface enables administrators to retrieve specific policy class attributes, including match criteria and associated actions, for granular control over network security and QoS enforcement.
Added stnPmClassTable
Main OID:
stnPm.1.3.6.1.4.1.3551.2.11
245
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
245 total| Object Name |
|---|
stnPmAdded stnPmClassTable MODULE-IDENTITY .1.3.6.1.4.1.3551.2.11 |
stnPmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1 |
stnPmService OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.1 |
stnPmServiceTableA list of PM service entries. SEQUENCE OF StnPmServiceEntry .1.3.6.1.4.1.3551.2.11.1.1.1 |
stnPmServiceEntryEntry contains information about a particular policy manager service. StnPmServiceEntry .1.3.6.1.4.1.3551.2.11.1.1.1.1 |
stnPmServiceIndexIndex into service tablero Integer32 .1.3.6.1.4.1.3551.2.11.1.1.1.1.1 |
stnPmServiceNameName of servicero DisplayString .1.3.6.1.4.1.3551.2.11.1.1.1.1.2 |
stnPmServiceIdleTimeoutIdle timeout for servicero Integer32 .1.3.6.1.4.1.3551.2.11.1.1.1.1.3 |
stnPmServiceNumPoliciesNumber of policies in this servicero Integer32 .1.3.6.1.4.1.3551.2.11.1.1.1.1.4 |
stnPmServiceEnabledFlag to indicate if service is enabledro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.1.1.1.5 |
stnPmServiceTypeType of servicero Enumeration .1.3.6.1.4.1.3551.2.11.1.1.1.1.7 |
stnPmServiceFirewallIDInstance of service's firewall recordro Integer32 .1.3.6.1.4.1.3551.2.11.1.1.1.1.8 |
stnPmPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.2 |
stnPmPolicyTableA list of policy entries. SEQUENCE OF StnPmPolicyEntry .1.3.6.1.4.1.3551.2.11.1.2.1 |
stnPmPolicyEntryEntry contains information about a particular policy. StnPmPolicyEntry .1.3.6.1.4.1.3551.2.11.1.2.1.1 |
stnPmPolicyServiceIndexService index of policyro Integer32 .1.3.6.1.4.1.3551.2.11.1.2.1.1.1 |
stnPmPolicyIndexPolicy index of policyro Integer32 .1.3.6.1.4.1.3551.2.11.1.2.1.1.2 |
stnPmPolicyNamePolicy namero DisplayString .1.3.6.1.4.1.3551.2.11.1.2.1.1.3 |
stnPmPolicySrcAddrMatchTypeType of match for source addressro StnPmPolicyMatchType .1.3.6.1.4.1.3551.2.11.1.2.1.1.4 |
stnPmPolicySrcAddrSource address to matchro IpAddress .1.3.6.1.4.1.3551.2.11.1.2.1.1.5 |
stnPmPolicySrcMaskSource IP netmask to matchro IpAddress .1.3.6.1.4.1.3551.2.11.1.2.1.1.6 |
stnPmPolicySrcEndAddrEnd of source address range to matchro IpAddress .1.3.6.1.4.1.3551.2.11.1.2.1.1.7 |
stnPmPolicyDestAddrMatchTypeType of match for source addressro StnPmPolicyMatchType .1.3.6.1.4.1.3551.2.11.1.2.1.1.8 |
stnPmPolicyDestAddrSource address to matchro IpAddress .1.3.6.1.4.1.3551.2.11.1.2.1.1.9 |
stnPmPolicyDestMaskSource IP netmask to matchro IpAddress .1.3.6.1.4.1.3551.2.11.1.2.1.1.10 |
stnPmPolicyDestEndAddrEnd of source address range to matchro IpAddress .1.3.6.1.4.1.3551.2.11.1.2.1.1.11 |
stnPmPolicySrcPortMatchTypeType of match for source portro StnPmPolicyMatchType .1.3.6.1.4.1.3551.2.11.1.2.1.1.12 |
stnPmPolicySrcPortSource port to matchro Integer32 .1.3.6.1.4.1.3551.2.11.1.2.1.1.13 |
stnPmPolicySrcEndPortEnd of source port range to matchro Integer32 .1.3.6.1.4.1.3551.2.11.1.2.1.1.14 |
stnPmPolicyDestPortMatchTypeType of match for destination portro StnPmPolicyMatchType .1.3.6.1.4.1.3551.2.11.1.2.1.1.15 |
stnPmPolicyDestPortDestination port to matchro Integer32 .1.3.6.1.4.1.3551.2.11.1.2.1.1.16 |
stnPmPolicyDestEndPortEnd of destination port range to matchro Integer32 .1.3.6.1.4.1.3551.2.11.1.2.1.1.17 |
stnPmPolicyProtocolMatchTypeType of match for protocolro StnPmPolicyMatchType .1.3.6.1.4.1.3551.2.11.1.2.1.1.18 |
stnPmPolicyProtocolProtocol to matchro Enumeration .1.3.6.1.4.1.3551.2.11.1.2.1.1.19 |
stnPmPolicyActionType of action to take upon policy matchro Enumeration .1.3.6.1.4.1.3551.2.11.1.2.1.1.20 |
stnPmPolicyActionIDConfiguration ID of action recordro Integer32 .1.3.6.1.4.1.3551.2.11.1.2.1.1.21 |
stnPmPolicyDirectionDirection of policyro StnPmDirection .1.3.6.1.4.1.3551.2.11.1.2.1.1.22 |
stnPmPolicyCreateMirrorMirror policy flagro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.2.1.1.23 |
stnPmPolicySrcAddrSelectorSource selector to choose for policy matchingro StnPmSelectorType .1.3.6.1.4.1.3551.2.11.1.2.1.1.24 |
stnPmPolicyDestAddrSelectorDestination selector to choose for policy matchingro StnPmSelectorType .1.3.6.1.4.1.3551.2.11.1.2.1.1.25 |
stnPmPolicyEnabledFlag to indicate if policy is enabledro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.2.1.1.26 |
stnPmPolicyMatchesNumber of times policy search matched this policyro Integer32 .1.3.6.1.4.1.3551.2.11.1.2.1.1.27 |
stnPmPolicyMissesNumber of times policy search did not match this policyro Integer32 .1.3.6.1.4.1.3551.2.11.1.2.1.1.28 |
stnPmPolicyMarkedOctetsNumber of octets that have been marked for this policy.ro Counter64 .1.3.6.1.4.1.3551.2.11.1.2.1.1.29 |
stnPmPolicyMarkedPktsNumber of packets that have been marked for this policy.ro Counter64 .1.3.6.1.4.1.3551.2.11.1.2.1.1.30 |
stnPmPolicyIcmpTypesICMP Types matching the policy entry expressed as bit-map.ro Unsigned32 .1.3.6.1.4.1.3551.2.11.1.2.1.1.31 |
stnPmPolicyTosByteMatchTypeType of match for TOS Bytero StnPmPolicyMatchType .1.3.6.1.4.1.3551.2.11.1.2.1.1.32 |
stnPmPolicyTosByteValueValue containing bits to set in TOS Bytero INTEGER .1.3.6.1.4.1.3551.2.11.1.2.1.1.33 |
stnPmPolicyTosByteMaskMask indicating bits to match in TOS bytero INTEGER .1.3.6.1.4.1.3551.2.11.1.2.1.1.34 |
stnPmPolicyMarkerIDConfiguration ID of marker to applyro Integer32 .1.3.6.1.4.1.3551.2.11.1.2.1.1.35 |
stnPmPolicyTxclassIDConfiguration ID of transmit class to assign packet toro Integer32 .1.3.6.1.4.1.3551.2.11.1.2.1.1.36 |
stnPmPreference OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.3 |
stnPmPreferenceTableEntry contains information about a particular preference entry. SEQUENCE OF StnPmPreferenceEntry .1.3.6.1.4.1.3551.2.11.1.3.1 |
stnPmPreferenceEntryEntry contains information about a particular preference. StnPmPreferenceEntry .1.3.6.1.4.1.3551.2.11.1.3.1.1 |
stnPmPreferenceIndexPreference indexro Integer32 .1.3.6.1.4.1.3551.2.11.1.3.1.1.1 |
stnPmPreferenceNumPreference numberro Integer32 .1.3.6.1.4.1.3551.2.11.1.3.1.1.2 |
stnPmPreferenceAhAlgAH authentication algorithmro StnPmAuthAlg .1.3.6.1.4.1.3551.2.11.1.3.1.1.3 |
stnPmPreferenceEspAuthAlgESP authentication algorithmro StnPmAuthAlg .1.3.6.1.4.1.3551.2.11.1.3.1.1.4 |
stnPmPreferenceEspEncrAlgESP encryption algorithmro StnPmEncrAlg .1.3.6.1.4.1.3551.2.11.1.3.1.1.5 |
stnPmPreferenceLifeTimeLife time in minutesro Integer32 .1.3.6.1.4.1.3551.2.11.1.3.1.1.6 |
stnPmPreferenceLifeBytesLife value in kilobytesro Integer32 .1.3.6.1.4.1.3551.2.11.1.3.1.1.7 |
stnPmPreferenceIPsecIDID of corresponding IPSEC recordro Integer32 .1.3.6.1.4.1.3551.2.11.1.3.1.1.8 |
stnPmPreferencePFSGroupESP encryption algorithmro Enumeration .1.3.6.1.4.1.3551.2.11.1.3.1.1.9 |
stnPmPreferenceDescriptionDescription of preferencero DisplayString .1.3.6.1.4.1.3551.2.11.1.3.1.1.10 |
stnPmIPsec OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.4 |
stnPmIPsecTableEntry contains information about a particular IPsec entry. SEQUENCE OF StnPmIPsecEntry .1.3.6.1.4.1.3551.2.11.1.4.1 |
stnPmIPsecEntryEntry contains information about a particular IPsec entry. StnPmIPsecEntry .1.3.6.1.4.1.3551.2.11.1.4.1.1 |
stnPmIPsecIndexIPsec indexro Integer32 .1.3.6.1.4.1.3551.2.11.1.4.1.1.1 |
stnPmIPsecPeerIpAddrIP address of peer for tunnel endpointro IpAddress .1.3.6.1.4.1.3551.2.11.1.4.1.1.2 |
stnPmIPsecLocalIpAddrLocal IP address for tunnel endpointro IpAddress .1.3.6.1.4.1.3551.2.11.1.4.1.1.3 |
stnPmIPsecModeType of IPsec connection to createro Enumeration .1.3.6.1.4.1.3551.2.11.1.4.1.1.4 |
stnPmIPsecKeyNegTypeKey negotiation method for IPsec Saro Enumeration .1.3.6.1.4.1.3551.2.11.1.4.1.1.5 |
stnPmIPsecNameDescription of IPsec entryro DisplayString .1.3.6.1.4.1.3551.2.11.1.4.1.1.6 |
stnPmIPsecNumManualSAsNumber of manual SAs assigned to this IPsec recordro Integer32 .1.3.6.1.4.1.3551.2.11.1.4.1.1.7 |
stnPmIPsecNumPreferencesNumber of preferences assigned to this IPsec recordro Integer32 .1.3.6.1.4.1.3551.2.11.1.4.1.1.8 |
stnPmIPsecReplayDetectionEnabledEnable Replay detection.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.4.1.1.9 |
stnPmEncaps OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.5 |
stnPmEncapsTableEntry contains information about a particular Encaps entry. SEQUENCE OF StnPmEncapsEntry .1.3.6.1.4.1.3551.2.11.1.5.1 |
stnPmEncapsEntryEntry contains information about a particular Encaps entry. StnPmEncapsEntry .1.3.6.1.4.1.3551.2.11.1.5.1.1 |
stnPmEncapsIndexEncaps indexro Integer32 .1.3.6.1.4.1.3551.2.11.1.5.1.1.1 |
stnPmEncapsPeerIpAddrIP address of peer for tunnel endpointro IpAddress .1.3.6.1.4.1.3551.2.11.1.5.1.1.2 |
stnPmEncapsLocalIpAddrLocal IP address for tunnel endpointro IpAddress .1.3.6.1.4.1.3551.2.11.1.5.1.1.3 |
stnPmEncapsTypeType of Encaps connection to createro Enumeration .1.3.6.1.4.1.3551.2.11.1.5.1.1.4 |
stnPmEncapsGREKeyGRE keyro Integer32 .1.3.6.1.4.1.3551.2.11.1.5.1.1.5 |
stnPmEncapsNameDescription of Encaps entryro DisplayString .1.3.6.1.4.1.3551.2.11.1.5.1.1.6 |
stnPmManualSa OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.6 |
stnPmManualSaTableEntry contains information about a particular ManualSa entry. SEQUENCE OF StnPmManualSaEntry .1.3.6.1.4.1.3551.2.11.1.6.1 |
stnPmManualSaEntryEntry contains information about a particular ManualSa entry. StnPmManualSaEntry .1.3.6.1.4.1.3551.2.11.1.6.1.1 |
stnPmManualSaIndexManualSa indexro Integer32 .1.3.6.1.4.1.3551.2.11.1.6.1.1.1 |
stnPmManualSaPeerIpAddrIP address of peer for tunnel endpointro IpAddress .1.3.6.1.4.1.3551.2.11.1.6.1.1.2 |
stnPmManualSaDirectionDirection of manual SAro StnPmDirection .1.3.6.1.4.1.3551.2.11.1.6.1.1.3 |
stnPmManualSaSPISPI of manual SAro Integer32 .1.3.6.1.4.1.3551.2.11.1.6.1.1.4 |
stnPmManualSaAhAlgAH authentication algorithmro StnPmAuthAlg .1.3.6.1.4.1.3551.2.11.1.6.1.1.5 |
stnPmManualSaAhKeyAuthentication key for AH protocolro OCTET STRING .1.3.6.1.4.1.3551.2.11.1.6.1.1.6 |
stnPmManualSaEspAuthAlgESP authentication algorithmro StnPmAuthAlg .1.3.6.1.4.1.3551.2.11.1.6.1.1.7 |
stnPmManualSaEspAuthKeyAuthentication key for ESP protocolro OCTET STRING .1.3.6.1.4.1.3551.2.11.1.6.1.1.8 |
stnPmManualSaEspEncrAlgESP encryption algorithmro StnPmEncrAlg .1.3.6.1.4.1.3551.2.11.1.6.1.1.9 |
stnPmManualSaEspEncrKeyEncryption key for ESP protocolro OCTET STRING .1.3.6.1.4.1.3551.2.11.1.6.1.1.10 |
stnPmManualSaIPsecIDIndex or corresponding IPsec recordro Integer32 .1.3.6.1.4.1.3551.2.11.1.6.1.1.11 |
stnPmManualSaDescriptionDescription of manual SA entryro DisplayString .1.3.6.1.4.1.3551.2.11.1.6.1.1.12 |
stnPmMarker OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.7 |
stnPmMarkerTableEntry contains information about a particular Marker entry. SEQUENCE OF StnPmMarkerEntry .1.3.6.1.4.1.3551.2.11.1.7.1 |
stnPmMarkerEntryEntry contains information about a particular Marker entry. StnPmMarkerEntry .1.3.6.1.4.1.3551.2.11.1.7.1.1 |
stnPmMarkerIndexMarker indexro Integer32 .1.3.6.1.4.1.3551.2.11.1.7.1.1.1 |
stnPmMarkerNameDescription of Marker entryro DisplayString .1.3.6.1.4.1.3551.2.11.1.7.1.1.2 |
stnPmMarkerByteValueValue that the masked TOS byte must matchro INTEGER .1.3.6.1.4.1.3551.2.11.1.7.1.1.3 |
stnPmMarkerByteMaskMask applied to TOS byte for matchro INTEGER .1.3.6.1.4.1.3551.2.11.1.7.1.1.4 |
stnPmMarkerMarkedOctetsNumber of octets marked by this Marker.ro Counter64 .1.3.6.1.4.1.3551.2.11.1.7.1.1.5 |
stnPmMarkerMarkedPktsNumber of packets marked by this Marker.ro Counter64 .1.3.6.1.4.1.3551.2.11.1.7.1.1.6 |
stnPmProfile OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.8 |
stnPmProfileTableEntry contains information about a particular Profile entry. SEQUENCE OF StnPmProfileEntry .1.3.6.1.4.1.3551.2.11.1.8.1 |
stnPmProfileEntryEntry contains information about a particular Profile entry. StnPmProfileEntry .1.3.6.1.4.1.3551.2.11.1.8.1.1 |
stnPmProfileIndexProfile indexro Integer32 .1.3.6.1.4.1.3551.2.11.1.8.1.1.1 |
stnPmProfileEnabledFlag to indicate if profile is enabledro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.8.1.1.2 |
stnPmProfileNameDescription of Profile entryro DisplayString .1.3.6.1.4.1.3551.2.11.1.8.1.1.3 |
stnPmProfileCommittedRateRate in kbits per second the user or network is committed to transmit.ro Integer32 .1.3.6.1.4.1.3551.2.11.1.8.1.1.4 |
stnPmProfileCommittedBurstMaximum number of kbytes in a single transmission burstro Integer32 .1.3.6.1.4.1.3551.2.11.1.8.1.1.5 |
stnPmProfileExcessRateMaximum acceptable rate in kbits per second the user or network is committed to transmitro Integer32 .1.3.6.1.4.1.3551.2.11.1.8.1.1.6 |
stnPmProfileExcessBurstMaximum number of bytes in a single maximum transmission burstro Integer32 .1.3.6.1.4.1.3551.2.11.1.8.1.1.7 |
stnPmProfileConformActionType of action to take for conformant framesro Enumeration .1.3.6.1.4.1.3551.2.11.1.8.1.1.8 |
stnPmProfileConformActionIDConfiguration ID of conform action recordro Integer32 .1.3.6.1.4.1.3551.2.11.1.8.1.1.9 |
stnPmProfileCautionActionType of action to take for caution framesro Enumeration .1.3.6.1.4.1.3551.2.11.1.8.1.1.10 |
stnPmProfileConformOctetsNumber of octets in conformant frames that have arrived.ro Counter64 .1.3.6.1.4.1.3551.2.11.1.8.1.1.11 |
stnPmProfileConformPktsNumber of conformant frames that have arrived.ro Counter64 .1.3.6.1.4.1.3551.2.11.1.8.1.1.12 |
stnPmProfileCautionActionIDConfiguration ID of caution action recordro Integer32 .1.3.6.1.4.1.3551.2.11.1.8.1.1.13 |
stnPmProfileExceedActionType of action to take for exceeding framesro Enumeration .1.3.6.1.4.1.3551.2.11.1.8.1.1.14 |
stnPmProfileCautionOctetsNumber of octets in caution frames that have arrived.ro Counter64 .1.3.6.1.4.1.3551.2.11.1.8.1.1.15 |
stnPmProfileCautionPktsNumber of caution frames that have arrived.ro Counter64 .1.3.6.1.4.1.3551.2.11.1.8.1.1.16 |
stnPmProfileExceedActionIDConfiguration ID of exceeding action recordro Integer32 .1.3.6.1.4.1.3551.2.11.1.8.1.1.17 |
stnPmProfileExceedOctetsNumber of octets in exceeding frames that have arrived.ro Counter64 .1.3.6.1.4.1.3551.2.11.1.8.1.1.18 |
stnPmProfileExceedPktsNumber of exceeding frames that have arrived.ro Counter64 .1.3.6.1.4.1.3551.2.11.1.8.1.1.19 |
stnPmQueue OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.9 |
stnPmQueueTableEntry contains information about a particular Queue entry. SEQUENCE OF StnPmQueueEntry .1.3.6.1.4.1.3551.2.11.1.9.1 |
stnPmQueueEntryEntry contains information about a particular Queue entry. StnPmQueueEntry .1.3.6.1.4.1.3551.2.11.1.9.1.1 |
stnPmQueueIndexQueue indexro Integer32 .1.3.6.1.4.1.3551.2.11.1.9.1.1.1 |
stnPmQueueNameDescription of Queue entryro DisplayString .1.3.6.1.4.1.3551.2.11.1.9.1.1.2 |
stnPmQueueThresholdQueue Drop Thresholdro Integer32 .1.3.6.1.4.1.3551.2.11.1.9.1.1.3 |
stnPmQueueDropTypeType of algorithm used to drop packets when threshold is reachedro Enumeration .1.3.6.1.4.1.3551.2.11.1.9.1.1.4 |
stnPmQueueDropHCOctetsNumber of octets that have been dropped this queue.ro Counter64 .1.3.6.1.4.1.3551.2.11.1.9.1.1.5 |
stnPmQueueDropHCPktsNumber of packets that have been dropped this queue.ro Counter64 .1.3.6.1.4.1.3551.2.11.1.9.1.1.6 |
stnPmQueueQueueLenNumber of packets currently in the queue.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.9.1.1.7 |
stnPmQueueMaxQueueLenMaximum number of packets in queue since last statistics reset.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.9.1.1.8 |
stnPmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.10 |
stnPmFirewallTrap OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.10.1 |
stnPmFirewallTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.10.1.1 |
stnPmFirewallEventLogMsgDescribes SNMP Trap generated by STN Firewallro DisplayString .1.3.6.1.4.1.3551.2.11.1.10.1.1.1 |
stnPmFirewallNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.10.1.2 |
stnPmFirewallNotification OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.10.1.2.0 |
stnPmFirewallLogThis trap is generated by Policy manager's Firewall subsystem. This SNMP trap is generated in response to firewall event logging. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.11.1.10.1.2.0.1 |
stnPmQosTrap OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.10.2 |
stnPmQosTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.10.2.1 |
stnPmQosLatestFlowCBValue of the FlowCB Createdro Integer32 .1.3.6.1.4.1.3551.2.11.1.10.2.1.1 |
stnPmQosLastDroppedPacketValue of a dropped packetro Integer32 .1.3.6.1.4.1.3551.2.11.1.10.2.1.2 |
stnPmQosNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.10.2.2 |
stnPmQosNotification OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.10.2.2.0 |
stnPmQosFlowCBCreatedThis trap is generated by Policy manager's QoS subsystem. This SNMP trap is generated in response to QoS creating and installing a flow. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.11.1.10.2.2.0.1 |
stnPmQosFlowCBRemovedThis trap is generated by Policy manager's QoS subsystem. This SNMP trap is generated in response to QoS removing a flow. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.11.1.10.2.2.0.2 |
stnPmQosShapingPacketDiscardThis trap is generated by Policy manager's QoS subsystem. This SNMP trap is generated in response to QoS dropping a packet due to rate shaping. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.11.1.10.2.2.0.3 |
stnPmQosThresholdPacketDiscardThis trap is generated by Policy manager's QoS subsystem. This SNMP trap is generated in response to QoS dropping a packet due to exceeding a threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.3551.2.11.1.10.2.2.0.4 |
stnPmFirewall OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.11 |
stnPmFirewallTableEntry contains information about a particular Firewall entry. SEQUENCE OF StnPmFirewallEntry .1.3.6.1.4.1.3551.2.11.1.11.1 |
stnPmFirewallEntryEntry contains information about a particular Firewall entry. StnPmFirewallEntry .1.3.6.1.4.1.3551.2.11.1.11.1.1 |
stnPmFirewallIndexFirewall indexro Integer32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.1 |
stnPmFirewallNameDescription of firewall entryro DisplayString .1.3.6.1.4.1.3551.2.11.1.11.1.1.2 |
stnPmFirewallAcceptOtherIPOptionsAccept packets with other IP options (non source routing).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.11.1.1.3 |
stnPmFirewallAcceptSourceRoutingAccept packets with source routing optionsro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.11.1.1.4 |
stnPmFirewallTcpAckLifeTimeTCP ACK lifetimero Integer32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.5 |
stnPmFirewallTcpSynLifeTimeTCP SYN lifetimero Integer32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.6 |
stnPmFirewallTcpFinLifeTimeTCP FIN lifetimero Integer32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.7 |
stnPmFirewallTcpRstLifeTimeTCP RST lifetimero Integer32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.8 |
stnPmFirewallTcpInactivityLifeTimeTCP inactivity lifetimero Integer32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.9 |
stnPmFirewallUdpInactivityLifeTimeUDP inactivity lifetimero Integer32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.10 |
stnPmFirewallSynAttackDetectionEnable SYN attack detectionro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.11.1.1.11 |
stnPmFirewallLandAttackDetectionEnable Land attack detectionro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.11.1.1.12 |
stnPmFirewallPingFloodingDetectionEnable ping flooding attack detectionro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.11.1.1.13 |
stnPmFirewallPingOfDeathDetectionEnable ping of death attack detectionro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.11.1.1.14 |
stnPmFirewallPortScanDetectionEnable port scan attack detectionro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.11.1.1.15 |
stnPmFirewallPingScanDetectionEnable ping scan/sweep attack detectionro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.11.1.1.16 |
stnPmFirewallTcpSynBacklogQueueSizeSize of the SYN backlog queuero Integer32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.17 |
stnPmFirewallPingsPerMinuteMaximum number of pings allowed per minutero Integer32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.18 |
stnPmFirewallMaxPingSizeMaximum allowable size for pingro Integer32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.19 |
stnPmFirewallEnableDynamicPortAppsEnabled Dynamic port applications expressed as bit-map.ro Unsigned32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.20 |
stnPmFirewallMaxDynHashTableSizeMax dynamic hash table size - must be a power of 2.ro Integer32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.21 |
stnPmFirewallMinLogPeriodMinimim period between event logsro Integer32 .1.3.6.1.4.1.3551.2.11.1.11.1.1.22 |
stnPmFirewallAction OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.12 |
stnPmFirewallActionTableEntry contains information about a particular Firewall Action entry. SEQUENCE OF StnPmFirewallActionEntry .1.3.6.1.4.1.3551.2.11.1.12.1 |
stnPmFirewallActionEntryEntry contains information about a particular Firewall Action entry. StnPmFirewallActionEntry .1.3.6.1.4.1.3551.2.11.1.12.1.1 |
stnPmFirewallActionIndexFirewall Action indexro Integer32 .1.3.6.1.4.1.3551.2.11.1.12.1.1.1 |
stnPmFirewallActionNameDescription of firewall entryro DisplayString .1.3.6.1.4.1.3551.2.11.1.12.1.1.2 |
stnPmFirewallActionTrackingTypeTCP ACK lifetimero Enumeration .1.3.6.1.4.1.3551.2.11.1.12.1.1.3 |
stnPmFirewallActionStatefulPerform stateful processingro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.12.1.1.4 |
stnPmFirewallActionInactivityLifeTimeInactivity lifetimero Integer32 .1.3.6.1.4.1.3551.2.11.1.12.1.1.5 |
stnPmFirewallActionRejectActionFirewall policy reject action.ro Enumeration .1.3.6.1.4.1.3551.2.11.1.12.1.1.6 |
stnPmServiceList OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.13 |
stnPmServiceListTableEntry contains information about a particular Firewall Action entry. SEQUENCE OF StnPmServiceListEntry .1.3.6.1.4.1.3551.2.11.1.13.1 |
stnPmServiceListEntryEntry contains information about a particular Firewall Action entry. StnPmServiceListEntry .1.3.6.1.4.1.3551.2.11.1.13.1.1 |
stnPmServiceListIndexService List Action indexro Integer32 .1.3.6.1.4.1.3551.2.11.1.13.1.1.1 |
stnPmServiceListNameDescription of service list entryro DisplayString .1.3.6.1.4.1.3551.2.11.1.13.1.1.2 |
stnPmServiceListConnIdleTimeoutIdle timeoutro Integer32 .1.3.6.1.4.1.3551.2.11.1.13.1.1.3 |
stnPmServiceListNumServicesNumber of services in this serviceListro Integer32 .1.3.6.1.4.1.3551.2.11.1.13.1.1.4 |
stnPmServiceListEnabledFlag to indicate if service is enabledro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.13.1.1.5 |
stnPmSLService OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.14 |
stnPmSLServiceTableA list of PM service entries. SEQUENCE OF StnPmSLServiceEntry .1.3.6.1.4.1.3551.2.11.1.14.1 |
stnPmSLServiceEntryEntry contains information about a particular policy manager service. StnPmSLServiceEntry .1.3.6.1.4.1.3551.2.11.1.14.1.1 |
stnPmSLIndexIndex into service-list tablero Integer32 .1.3.6.1.4.1.3551.2.11.1.14.1.1.1 |
stnPmSLServiceIndexIndex into service tablero Integer32 .1.3.6.1.4.1.3551.2.11.1.14.1.1.2 |
stnPmSLServiceNameName of servicero DisplayString .1.3.6.1.4.1.3551.2.11.1.14.1.1.3 |
stnPmSLServiceIdleTimeoutIdle timeout for servicero Integer32 .1.3.6.1.4.1.3551.2.11.1.14.1.1.4 |
stnPmSLServiceNumPoliciesNumber of policies in this servicero Integer32 .1.3.6.1.4.1.3551.2.11.1.14.1.1.5 |
stnPmSLServiceEnabledFlag to indicate if service is enabledro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.14.1.1.6 |
stnPmSLServiceTypeType of servicero Enumeration .1.3.6.1.4.1.3551.2.11.1.14.1.1.7 |
stnPmSLServiceFirewallIDInstance of service's firewall recordro Integer32 .1.3.6.1.4.1.3551.2.11.1.14.1.1.8 |
stnPmClass OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.15 |
stnPmClassTableThis table is a 'flattened' version of a hierarchical class trees that specify the bandwidth allocation for the CBQ interfaces of the system. Each tree is rooted at an interface. A class may either be a leaf, meaning it has no children, or it may be an interior class which has children. As packets are forwarded out an interface, they are compared to the 'flow definition' of each class down the tree until a matching leaf is found or until all classes are traversed. Once a matching class is found, the packet is transmitted or not based on the constraints configured for the class, most importantly the allocated bandwidth as identified by stnPmClassRate. If no matching class is found, the packet is dropped. SEQUENCE OF StnPmClassEntry .1.3.6.1.4.1.3551.2.11.1.15.1 |
stnPmClassEntryInformation about a single traffic class. Traffic classes are identified by their associated interface's ifIndex and their name. (Which means class names must be unique for a particular interface.) Finally, the following objects cannot be modified once the row is active: stnPmClassParent, and stnPmClassQueueElasticityFactor. StnPmClassEntry .1.3.6.1.4.1.3551.2.11.1.15.1.1 |
stnPmIfIndexA sequence number that identifies a particular interface the class has been installed on.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.3551.2.11.1.15.1.1.1 |
stnPmTxclassInstanceThe instance of the configuration record for the tranmsit class that the interface is using.ro Integer32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.2 |
stnPmClassNameA user-defined name for the traffic class. This is the unique identifier for the class within the scope of the interface. For example, the class that defines the IP address range for a particular customer might be 'Customer Fred Co.'ro DisplayString .1.3.6.1.4.1.3551.2.11.1.15.1.1.3 |
stnPmClassParentName of class parentro DisplayString .1.3.6.1.4.1.3551.2.11.1.15.1.1.4 |
stnPmClassRateA fraction of the bandwidth of the root interface to be allocated to this traffic class. Note that specifying 0 bits/second effectively filters all traffic that matches this class' flow specification. Also note that the sum of bit rates for all classes defined under the same class must be less than or equal to stnPmClassRate of the parent.ro StnPmBitRate UNITS "bits per second" .1.3.6.1.4.1.3551.2.11.1.15.1.1.5 |
stnPmClassPriorityThe priority for this class. The smaller the value, the higher the priority. Delay-sensitive flows (such as video or audio) should be given higher priority values.ro Integer32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.6 |
stnPmClassMaxIdleAn upper bound for the average idle time (see the DESCRIPTION of stnPmClassStatsIdle). Thus, stnPmClassMaxIdle limits the 'credit' given to a class that has recently been under its allocation.ro Integer32 UNITS "tens of nanoseconds" .1.3.6.1.4.1.3551.2.11.1.15.1.1.7 |
stnPmClassMinIdleThe negative lower bound of the average idle. Thus, a negative minidle lets the router 'remember' that a class has recently used more than its allocated bandwidth.ro Integer32 UNITS "tens of nanoseconds" .1.3.6.1.4.1.3551.2.11.1.15.1.1.8 |
stnPmClassMaxQueueLenA factor used to influence whether this traffic class gets a proportionally larger or smaller queue size than other classes. Other factors in the queue size include the percent bandwidth allocated to this class and the priority.ro Integer32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.9 |
stnPmClassOperStatusThe actual operational status of the traffic class. The value 'up(1)' means this traffic class is in use, the value 'down(2)' indicates the traffic class is not in use either due to an internal problem or because it (or an ancestor) is administratively disabled, and the value 'downConflict(3)' indicates the class definition conflicts with those of its siblings. The value autoClassActive(4) means that the class is a dynamically created AutoClass, which may not be modified in any way until it is saved to Non-Volatile configuration memory. After an AutoClass is saved to NVRAM, it's operational status will transistion to up (1).ro Enumeration .1.3.6.1.4.1.3551.2.11.1.15.1.1.10 |
stnPmClassBwUseAn indication of whether this traffic class has used its allocated bandwidth, has not used its allocated bandwidth or has used more than its allocated bandwidth and is therefore 'atLimit(1)', 'underLimit(2)', or 'overLimit(3)' respectively.ro Enumeration .1.3.6.1.4.1.3551.2.11.1.15.1.1.11 |
stnPmClassUnsatisfiedAn indication of whether this traffic class is 'unsatisfied'. The value of this object is 'true(1)' if it is underLimit and has a persistent backlog, meaning it has packets waiting in its queue. The value is 'false(1)' otherwise. Note that a class can be considered satisfied if it is underLimit and it just hasn't had anything to transmit. The presence of an unsatisfied class indicates that some other class is overLimit and 'hogging' bandwidth. Persistently unsatisfied classes indicate that tuning some of the parameters (such as stnPmClassMaxIdle or stnPmClassBounded) may be necessary.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3551.2.11.1.15.1.1.12 |
stnPmClassQueueSizeThe size of the queue associated with this traffic class. This is the maximum number of packets that can be in the queue, not the number that are currently queued (see stnPmClassStatsQueuedPkts).ro Gauge32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.13 |
stnPmClassMaxRateThe maximum bandwidth the class may achieve, including bandwidth allocated to this class, and any bandwidth that may be borrowed. A value of zero (0) indicates that this feature is not being used. The stnPmClassMaxRate must be set to a value higher than the stnPmClassRate, but may also exceed the parent class's stnPmClassRate.ro StnPmBitRate UNITS "bits per second" .1.3.6.1.4.1.3551.2.11.1.15.1.1.14 |
stnPmClassDescriptionTextual name associated with this class.ro DisplayString .1.3.6.1.4.1.3551.2.11.1.15.1.1.15 |
stnPmClassStatsHighWaterThe historical maximum number of packets that were queued for this class since the system was last reinitialized.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.16 |
stnPmClassStatsIdleThe difference between the desired time and the measured actual time between the most recent packet transmissions for the last two packets sent from this class. When the connection is sending perfectly at its allocated rate, then stnPmClassIdle is zero. When the connection is sending more than its allocated bandwidth, then stnPmClassIdle is negative.ro Integer32 UNITS "tens of nanoseconds" .1.3.6.1.4.1.3551.2.11.1.15.1.1.17 |
stnPmClassStatsQueuedPktsThe current number of packets in the class' queue.ro Gauge32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.18 |
stnPmClassStatsOctetsThe number of bytes transmitted for this traffic class. Note that a class with a configured stnPmClassRate of 0 bits/second will never transmit any octets and therefore this object's value will be 0. These filtered octets will be counted as part of stnPmClassStatsDroppedOctets.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.19 |
stnPmClassStatsPktsThe number of packets transmitted for this traffic class. Note that a class with a configured stnPmClassRate of 0 bits/second will never transmit any packets and therefore this object's value will be 0. These filtered packets will be counted as part of stnPmClassStatsDroppedPkts.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.20 |
stnPmClassStatsOverLimitsA count of the number of times the class used more than its allocated bandwidth.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.21 |
stnPmClassStatsBorrowAttemptsA count of the number of times the class attempted to 'borrow' bandwidth from another class.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.22 |
stnPmClassStatsDroppedOctetsA count of the number of octets dropped for this class because of lack of buffer space in the queue or because the class exceeded its allocated bandwidth.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.23 |
stnPmClassStatsDroppedPktsA count of the number of packets dropped for this class because of lack of buffer space in the queue or because the class exceeded its allocated bandwidth.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.24 |
stnPmClassStatsThrottlesA count of the number of times the class was throttled (not allowed to transmit packets) by the link-sharing algorithm.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.25 |
stnPmClassStatsUnsatisfiedsA count of the number of times the class was unsatisfied, as indicated by the stnPmClassUnsatisfied object.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.26 |
stnPmClassStatsAggrOctetsThe aggregate number of bytes transmitted by the children of this traffic class.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.27 |
stnPmClassStatsAggrPktsThe aggregate number of packets transmitted by the children of this traffic class.ro Counter32 .1.3.6.1.4.1.3551.2.11.1.15.1.1.28 |
stnPMProxyTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.1.16 |
stnPmMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3551.2.11.2 |