SONUS-TRUNK-GROUP-RESOURCES-MIB
AI MIB Summary
The SONUS-TRUNK-GROUP-RESOURCES-MIB monitors and manages trunk group resource utilization, including active session counts, channel availability, and traffic load statistics, on Sonus Networks Session Border Controllers (SBCs) and related telephony infrastructure. This module enables granular tracking of trunk capacity and congestion metrics to facilitate capacity planning and fault isolation in VoIP and SIP-based networks.
The MIB Module for Trunk Group Resources Management.
Main OID:
sonusTrunkGroupResourcesMIB.1.3.6.1.4.1.2879.2.2.3
118
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
118 total| Object Name |
|---|
sonusTrunkGroupResourcesMIBThe MIB Module for Trunk Group Resources Management. MODULE-IDENTITY .1.3.6.1.4.1.2879.2.2.3 |
sonusTrunkGroupResourcesMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.1 |
sonusTrunkObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.1.1 |
sonusTrunkConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.1.1.1 |
sonusTgMaxRpcLpcsMaximum number of RPC-LPC pairs for this gateway.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.1.1 |
sonusTgMaxCicsMaximum number of CICs for this gateway.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.1.2 |
sonusTgMaxTrunkGroupsMaximum number of trunk groups for this gateway.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.1.3 |
sonusTgMaxServiceGroupsMaximum number of Service Groups for this gateway.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.1.4 |
sonusTgMaxSgInstancesMaximum number of Service Group Instances for this gateway.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.1.5 |
sonusTgObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.1.1.2 |
sonusTgNextIndexThe next valid index to use when creating a new sonusTgEntryro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.2.1 |
sonusTgTableA list of trunk group entries. SEQUENCE OF SonusTgEntry .1.3.6.1.4.1.2879.2.2.3.1.1.2.2 |
sonusTgEntryEach sonusTgEntry containing configuration objects. Rules & Behaviors: A sonusTgEntry cannot be deleted when it is enabled. When disabling the trunk group entry, it must not have any associated SGs. All SGs must be removed before disabling the trunk group. A sonusTgEntry cannot be modified when it is enabled. SonusTgEntry .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1 |
sonusTgIndexA unique value for each trunk group that is between 1 and maximum allowedro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.1 |
sonusTgNameThe name of the trunk group.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.2 |
sonusTgProfNameThe name of the profile applied to this trunk group entry.rw DisplayString .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.3 |
sonusTgSgSelectSelection for hunting within a PSTN trunk group that has more than 1 associated service group(SG). It is either based on cost associated with each SG, how the SG is ordered during configuration (for circular also). If either circular option is chosen, then SG hunt algorithm is ignored.rw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.4 |
sonusTgLnpTranslateThis is only meaningful for PSTN trunk groups that may require LNP translation for the called number.rw SonusBoolean (SONUS-TC) .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.5 |
sonusTg800TranslateThis is only meaningful for PSTN trunk groups that may require 800 number translation for the called number.rw SonusBoolean (SONUS-TC) .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.6 |
sonusTgCallingNumVerifyThis is only meaningful for PSTN trunk groups that requires verification for the calling number.rw SonusBoolean (SONUS-TC) .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.7 |
sonusTgInboundReservedThis is only meaninful for PSTN Trunk Groups. This the percent of channels reserved for handling inbound calls. Default is 0% and valid for both direction type trunks. The amount reserved is round off to next number. For example, 50% of 23 hannels is 12.5 or 13 channels. Percentage selection allowed in 5% increments.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.8 |
sonusTgIsupOnlyThis is only meaningful for PSTN trunk groups that is either an ISUP only or mixed of ISUP and other PSTN typesrw SonusBoolean (SONUS-TC) .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.9 |
sonusTgCarrierThis is only meaningful for PSTN trunk groups and is specific to Isup only. This is the name of the Isup that this trunk group is bound to.rw DisplayString .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.10 |
sonusTgIsupNodeThis is meaningful for PSTN trunk groups and is specific to Isup only. This is the name of the Isup that this trunk group is bound to.rw DisplayString .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.11 |
sonusTgAdminStateAdministrative state to disable or enable a trunk group. All trunk groups are created with its state disabled. If trunk group is disabled, the trunk group must be enabled to allow calls to proceed.rw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.12 |
sonusTgModeThe operation mode for this trunk.rw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.13 |
sonusTgActionThe action for the operation mode for this trunk.rw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.14 |
sonusTgTimeoutTimeout value in minutes for the dry up action.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.15 |
sonusTgRowStatusThis is for SNMP use.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.16 |
sonusTgCirResvStateAdministrative state to disable or enable the circuit reservation feature on a trunk group. All trunk groups are created with this feature disabled. If this feature is enabled, the sonusTgInboundReserved feature is overriden automatically.rw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.17 |
sonusTgPriorityCallReserveThe minimum number of priority call allowed set for this trunk group when sonusTgCirResvState is set to enabled.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.18 |
sonusTgIncomingCallReserveThe minimum number of incoming call allowed set for this trunk group when sonusTgCirResvState is set to enabled.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.19 |
sonusTgOutgoingCallReserveThe minimum percent of outgoing call allowed set for this trunk group when sonusTgCirResvState is set to enabled.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.20 |
sonusTgStatusTableThis table contains status information of a PSTN trunk group. There may not be any SG registered to a trunk group in which case all statistics will be zero. SEQUENCE OF SonusTgStatusEntry .1.3.6.1.4.1.2879.2.2.3.1.1.3 |
sonusTgStatusEntryEach entry describes the current status of a PSTN trunk group. SonusTgStatusEntry .1.3.6.1.4.1.2879.2.2.3.1.1.3.1 |
sonusTgStatusIndexA unique value for each trunk group between 1 and maximum allowed.ro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.3.1.1 |
sonusTgOperStateCurrent operational state of the trunk group.ro Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.3.1.2 |
sonusTgPstnTotalAvailableThe sum of all available or unblocked PSTN channels for this trunk group.ro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.3.1.3 |
sonusTgPstnTotalInboundRsvThis is meaningful for PSTN trunk groups that are configured for inbound or both directions only. This is the reserved count as specified by the percentage configred for this trunk group.ro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.3.1.4 |
sonusTgPstnInboundUsageThis is only meaningful for PSTN trunk groups that are configured for inbound or both directions. This reflects the current inbound or incoming usage count of this trunk group.ro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.3.1.5 |
sonusTgPstnOutboundUsageThis is only meaningful for PSTN trunk groups that are configured for outbound or both directions. This reflects the current outbound, outgoing or non-priority usage count of this trunk group.ro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.3.1.6 |
sonusTgPstnTotalConfiguredThe sum of all configured and registered PSTN channels for this trunk group.ro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.3.1.7 |
sonusTgAccCurrentACLCurrent congestion level for the Trunk Groupro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.3.1.8 |
sonusTgPriorityCallUsageThis is only meaningful for ISUP trunk groups that are configured and when sonusTgCirResvState is enabled. This reflects the current priority usage count of this trunk group.ro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.3.1.9 |
sonusTgSgTableThis is a virtual table containing a list of service groups that belong to the same trunk group. This is a doubly indexed table so that further details about each service group may be queried by name. SEQUENCE OF SonusTgSgEntry .1.3.6.1.4.1.2879.2.2.3.1.1.4 |
sonusTgSgEntryEach entry lists the name and order of each service group. SonusTgSgEntry .1.3.6.1.4.1.2879.2.2.3.1.1.4.1 |
sonusTgSgTgIndexThe Trunk Group index that has the following set of Service Groups.ro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.4.1.1 |
sonusTgSgIndexA unique value for each service group in this trunk groupro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.4.1.2 |
sonusTgSgNameThe name of the service group.ro DisplayString .1.3.6.1.4.1.2879.2.2.3.1.1.4.1.3 |
sonusTgSgTypeThe type of the service group.ro Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.4.1.4 |
sonusTgProfileObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.1.1.5 |
sonusTgProfileNextIndexThe next valid index to use when creating a new sonusTgProfileEntryro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.5.5 |
sonusTgProfileTableA list of trunk group entries. SEQUENCE OF SonusTgProfileEntry .1.3.6.1.4.1.2879.2.2.3.1.1.5.6 |
sonusTgProfileEntryEach sonusTgProfileEntry containing configuration objects. Rules & Behaviors: A sonusTgProfileEntry cannot be deleted when it is enabled. When disabling the trunk group entry, it must not have any associated SGs. All SGs must be removed before disabling the trunk group. A sonusTgProfileEntry cannot be modified when it is enabled. SonusTgProfileEntry .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1 |
sonusTgProfileIndexA unique value for each trunk group profile that is between 1 and maximum allowedro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.1 |
sonusTgProfileNameThe name of this trunk group Profile.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.2 |
sonusTgProfileSgSelectSelection for hunting within a PSTN trunk group that has more than 1 associated service group(SG). It is based on cost associated with each SG, how the SG is ordered during configuration (for circular also). If either circular option is chosen, then SG hunt algorithm is ignored.rw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.3 |
sonusTgProfileAdminStateAdministrator state to use a trunk group Profile. All trunk group profiles are created with its state disabled. When disabled, the profile must be enabled to allowed to be used.rw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.4 |
sonusTgProfileInboundReservedThis is only meaninful for PSTN Trunk Groups. This the percent of channels reserved for handling inbound calls. Default is 0% and valid for both direction type trunks. The amount reserved is round off to next number. For example, 50% of 23 hannels is 12.5 or 13 channels. Percentage selection allowed in 5% increments.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.5 |
sonusTgProfileLnpTranslateThis is only meaningful for PSTN trunk groups that may require LNP translation for the called number.rw SonusBoolean (SONUS-TC) .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.6 |
sonusTgProfile800TranslateThis is only meaningful for PSTN trunk groups that may require 800 number translation for the called number.rw SonusBoolean (SONUS-TC) .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.7 |
sonusTgProfileCallingNumVerifyThis is only meaningful for PSTN trunk groups that requires verification for the calling number.rw SonusBoolean (SONUS-TC) .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.8 |
sonusTgProfileIsupOnlyThis is only meaningful for PSTN trunk groups that is either an ISUP only or mixed of ISUP and other PSTN typesrw SonusBoolean (SONUS-TC) .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.9 |
sonusTgProfileCarrierThis is only meaningful for PSTN trunk groups and is specific to Isup only. This is the name of the Isup that this trunk group is bound to.rw DisplayString .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.10 |
sonusTgProfileIsupNodeThis is only meaningful for PSTN trunk groups and is specific to Isup only. This is the name of the Isup that this trunk group is bound to.rw DisplayString .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.11 |
sonusTgProfSgSelectStateIndicates whether sonusTgProfileSgSelect object is present in this profilerw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.12 |
sonusTgProfInboundReservedStateIndicates whether sonusTgProfileInboundReserved object is present in this profilerw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.13 |
sonusTgProfLnpTranslateStateIndicates whether sonusTgProfileLnpTranslate object is present in this profilerw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.14 |
sonusTgProf800TranslateStateIndicates whether sonusTgProfile800Translate object is present in this profilerw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.15 |
sonusTgProfCallingNumVerifyStateIndicates whether sonusTgProfileCallingNumVerify object is present in this profilerw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.16 |
sonusTgProfIsupOnlyStateIndicates whether sonusTgProfileIsupOnly object is present in this profilerw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.17 |
sonusTgProfCarrierStateIndicates whether sonusTgProfileCarrier object is present in this profilerw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.18 |
sonusTgProfIsupNodeStateIndicates whether sonusTgProfileIsupNode object is present in this profilerw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.19 |
sonusTgProfileRowStatusThis is for SNMP use.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.20 |
sonusGatewayObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.1.2 |
sonusGatewayConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.1.2.1 |
sonusTgMaxGatewaysMaximum allowable destination or remote gateways in the configuration.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.2.1.1 |
sonusDestGatewayObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.1.2.2 |
sonusGatewayNextIndexThe next valid index to use when creating a new sonusGatewayEntryro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.2.2.1 |
sonusGatewayTableThis is a table containing a list of IP telephony gateways in the network. SEQUENCE OF SonusGatewayEntry .1.3.6.1.4.1.2879.2.2.3.1.2.2.2 |
sonusGatewayEntryEach entry lists the name and order of each gateway. SonusGatewayEntry .1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1 |
sonusGatewayIndexA unique value for each gateway between 1 and maximum allowed.ro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.1 |
sonusGatewayNameThe name of the IP Telephony gateway.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.2 |
sonusGatewayProfNameThe name of the profile applied to this gateway entry.rw DisplayString .1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.3 |
sonusGatewayTypeThe type of gateway.rw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.4 |
sonusGatewayIpAddressThis is signaling Ip address of the gateway.rw IpAddress .1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.5 |
sonusGatewayPortNumThis is the port number assigned for the signaling Ip address of the gateway (default is Sonus registered port 2569).rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.6 |
sonusGatewayMaxConnThis is the maximum connections allowed for this gateway to the remote gateway specified by the sonusGatewayName.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.7 |
sonusGatewayAdminStateAllow administrator to disable or enable the connection from this gateway to the remote gateway. All connections to the remote gateways are created with its state disabled. Once disabled, the gateway must be enabled to allow calls to proceed again.rw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.8 |
sonusGatewayRowStatusThis is for SNMP use.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.9 |
sonusDestGatewayStatusObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.1.2.3 |
sonusGwStatusTableThis is a table containing a list of IP telephony gateways in the network. SEQUENCE OF SonusGwStatusEntry .1.3.6.1.4.1.2879.2.2.3.1.2.3.3 |
sonusGwStatusEntryEach entry lists the current connections and order of each gateway. SonusGwStatusEntry .1.3.6.1.4.1.2879.2.2.3.1.2.3.3.1 |
sonusGwStatusIndexA unique value for each gateway between 1 and maximum allowed.ro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.2.3.3.1.1 |
sonusGwCurrConnectionsThe Current number of connections between this gateway and the remote gateway.ro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.2.3.3.1.2 |
sonusCarrierObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.1.3 |
sonusCarrierConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.1.3.1 |
sonusTgMaxCarrierCodesMaximum number of Carrier Codes for this gateway.rw Integer32 .1.3.6.1.4.1.2879.2.2.3.1.3.1.1 |
sonusCarrierCodeObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.1.3.2 |
sonusCarrierCodeNextIndexThe next valid index to use when creating a new sonusCarrierCodeEntryro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.3.2.1 |
sonusCarrierCodeTableThis is a table containing a list of IP telephony gateways in the network. SEQUENCE OF SonusCarrierCodeEntry .1.3.6.1.4.1.2879.2.2.3.1.3.2.2 |
sonusCarrierCodeEntryEach entry lists the name and order of each gateway. SonusCarrierCodeEntry .1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1 |
sonusCarrierCodeIndexA unique value for each carrier code between 1 and maximum allowed.ro Integer32 .1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.1 |
sonusCarrierCodeNameThe name assigned to this carrier code.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.2 |
sonusCarrierCodeThis is the carrier code specified by the sonusCarrierCodeName. There are a maximum of up to 4 digits.rw DisplayString .1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.3 |
sonusCarrierCodeAdminStateAllow administrator to disable or enable this carrier code. Once disabled, this carrier code must be enabled to allow calls to proceed again.rw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.4 |
sonusCarrierCodeRowStatusThis is for SNMP use.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.5 |
sonusCarrierCodeNetworkIdTypeThe type of network identification for this carrier coderw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.6 |
sonusCarrierCodeNetworkIdPlanThe network identification plan for this carrier coderw Enumeration .1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.7 |
sonusTrunkGroupResourcesMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.2 |
sonusTrunkGroupResourcesMIBNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.2.0 |
sonusTrunkEnabledNotificationThis trap indicates a Trunk Group is now enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.2.3.2.0.1 |
sonusTrunkDisabledNotificationThis trap indicates a Trunk Group is now disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.2.3.2.0.2 |
sonusTrunkInServiceNotificationThis trap indicates a Trunk Group is now in service. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.2.3.2.0.3 |
sonusTrunkOutOfServiceNotificationThis trap indicates that a Trunk Group is out of service. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.2.3.2.0.4 |
sonusTrunkDeletedNotificationThis trap indicates a Trunk Group is now deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.2.3.2.0.5 |
sonusTrunkGroupResourcesMIBNotificationsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.3.2.1 |
sonusTrunkOutOfServiceReasonThe reason why the Trunk Group is out of service.ro Enumeration .1.3.6.1.4.1.2879.2.2.3.2.1.1 |