SONOMASYSTEMS-SONOMA-SRTB-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SONOMASYSTEMS-SONOMA-SRTB-MIB.
27
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
srtBridging OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.3.2 |
RFC1155-SMI Unknown .1.3.6.1.4.1.2926.25.3.2 |
srtBridgeNumberObsoleted by vlanConfigBrNumber. Was:
A bridge number uniquely identifies a bridge when more than
one bridge is used to span the same segments. This object
can have values between 0..15 inclusive and also a value
65535. When set to 65535, source routing on the unit is
DISABLED.rwobsolete INTEGER .1.3.6.1.4.1.2926.25.3.2.1 |
srtSourceRouteAgingTimeIf no frames from a source are received for this time,
any associated routing information in the Source Route
Table is purged. The granularity is seconds.rw INTEGER .1.3.6.1.4.1.2926.25.3.2.2 |
srtPortTableTable of Source Routing per Port parameters. SEQUENCE OF SrtPortEntry .1.3.6.1.4.1.2926.25.3.2.3 |
srtPortEntryAn entry in the logical port instanced SRT
Port Table. SrtPortEntry .1.3.6.1.4.1.2926.25.3.2.3.1 |
srtPortIfIndexThe port number of the port for which this entry
contains Source Route management information.ro INTEGER .1.3.6.1.4.1.2926.25.3.2.3.1.1 |
srtPortHopCountThe maximum number of routing descriptors allowed
in an All Paths or Spanning Tree Explorer frames.rw INTEGER .1.3.6.1.4.1.2926.25.3.2.3.1.2 |
srtPortLocalSegmentThe segment number that uniquely identifies the
segment to which this port is connected. Current
source routing protocols limit this value to the
range: 0 through 4095. A value of 65535 signifies
that no segment number is assigned to this port.rw INTEGER .1.3.6.1.4.1.2926.25.3.2.3.1.3 |
srtPortLargestFrameThe maximum size of the INFO field (LLC and
above) that this port can send/receive. It does
not include any MAC level (framing) octets. The
value of this object is used by this bridge to
determine whether a modification of the
LargestFrame (LF, see [14]) field of the Routing
Control field of the Routing Information Field is
necessary. Valid values as defined by the 802.5
source routing bridging specification[14] are 516,
1500, 2052, 4472, 8144, 11407, 17800, and 65535
octets. Behavior of the port when an illegal
value is written is implementation specific. It
is recommended that a reasonable legal value be
chosen.rw Enumeration .1.3.6.1.4.1.2926.25.3.2.3.1.4 |
srtPortSTESpanModeDetermines how this port behaves when presented
with a Spanning Tree Explorer frame. The value
'disabled(2)' indicates that the port will not
accept or send Spanning Tree Explorer packets; any
STE packets received will be silently discarded.
The value 'forced(3)' indicates the port will
always accept and propagate Spanning Tree Explorer
frames. This allows a manually configured
Spanning Tree for this class of packet to be
configured. Note that unlike transparent bridging
this is not catastrophic to the network if there
are loops. The value 'auto-span(1)' can only be
returned by a bridge that both implements the
Spanning Tree Protocol and has use of the protocol
enabled on this port. The behavior of the port for
Spanning Tree Explorer frames is determined by the
state of dot1dStpPortState. If the port is in the
'forwarding' state, the frame will be accepted or
propagated. Otherwise it will be silently
discarded.rw Enumeration .1.3.6.1.4.1.2926.25.3.2.3.1.5 |
srtPortSpecInFramesThe number of specifically routed frames that
have been received from this port's segment.ro Counter .1.3.6.1.4.1.2926.25.3.2.3.1.6 |
srtPortSpecOutFramesThe number of specifically routed frames that
this port has transmitted on its segment.ro Counter .1.3.6.1.4.1.2926.25.3.2.3.1.7 |
srtPortAREInFramesThe number of all paths explorer frames that have
been received by this port from its segment.ro Counter .1.3.6.1.4.1.2926.25.3.2.3.1.8 |
srtPortAREOutFramesThe number of all paths explorer frames that have
been transmitted by this port on its segment.ro Counter .1.3.6.1.4.1.2926.25.3.2.3.1.9 |
srtPortSteInFramesThe number of spanning tree explorer frames that
have been received by this port from its segment.ro Counter .1.3.6.1.4.1.2926.25.3.2.3.1.10 |
srtPortSteOutFramesThe number of spanning tree explorer frames that
have been transmitted by this port on its
segment.ro Counter .1.3.6.1.4.1.2926.25.3.2.3.1.11 |
srtPortSegmentMismatchDiscardsThe number of explorer frames that have been
discarded by this port because the routing
descriptor field contained an invalid adjacent
segment value.ro Counter .1.3.6.1.4.1.2926.25.3.2.3.1.12 |
srtPortDuplicateSegmentDiscardsThe number of frames that have been discarded by
this port because the routing descriptor field
contained a duplicate segment identifier.ro Counter .1.3.6.1.4.1.2926.25.3.2.3.1.13 |
srtPortHopCountExceededDiscardsThe number of explorer frames that have been
discarded by this port because the Routing
Information Field has exceeded the maximum route
descriptor length.ro Counter .1.3.6.1.4.1.2926.25.3.2.3.1.14 |
srtSourceRouteTableThis table contains a list of stored destination address
and the routing information fields which will be inserted
in frames sent to those destinations. SEQUENCE OF SrtSourceRouteEntry .1.3.6.1.4.1.2926.25.3.2.4 |
srtSourceRouteEntryAn source route entry. SrtSourceRouteEntry .1.3.6.1.4.1.2926.25.3.2.4.1 |
srtSourceRouteVlanIDThis is the ID of the Vlan on which the address
corresponding to this entry was learnt.ro INTEGER .1.3.6.1.4.1.2926.25.3.2.4.1.1 |
srtSourceRouteAddressThis is the source address which was stored when the
Source Routing frame which contained it was processed by the
SRTB. The address is in the form it was
received from the ring network.ro OCTET STRING .1.3.6.1.4.1.2926.25.3.2.4.1.2 |
srtSourceRouteRIFThis object contains all the routing information which was
extracted from the received Source Routed frame. The data
is in the form it was received from the ring networkro OCTET STRING .1.3.6.1.4.1.2926.25.3.2.4.1.3 |
srtSourceRouteTypeThis object represents the type of the entry. If the value
returned is sameRing (1), then this indicates that the
frame from which this entry was taken originated on our
local ring. A value of locked (2) is used for entries which
have been learned from ARE type frames.
The value provisional(3)is used for frames which have been
learned from STE frames and the responsWithARE (4) values is
used to indicate that when a response is sent to this
entry's address is should be sent as an ARE frame.ro Enumeration .1.3.6.1.4.1.2926.25.3.2.4.1.4 |
srtSourceRouteDirectionIf this object returns a value of inOrder(0), then this
means that the D bit is zero and that the frame traverses
the LANs in the order in which they are specified in the
routing information field.
Conversely, if the D bit is set to 1 the frame will traverse
the LANs in the reverse order. The D bit is meaningful only
or source routed frames (SRF). For STE and ARE frames the
D bit is ignored and is not altered by the unit.ro Enumeration .1.3.6.1.4.1.2926.25.3.2.4.1.5 |