SONOMASYSTEMS-SONOMA-ATM-GENERIC-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SONOMASYSTEMS-SONOMA-ATM-GENERIC-MIB.
159
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
159 total| Object Name |
|---|
sonomaGenericATMGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.2926.25.7.1 |
atmGenericPhysGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.1.1 |
atmGenPhysTableA table of physical layer status and parameter information
for the UNI's physical interface SEQUENCE OF AtmGenPhysEntry .1.3.6.1.4.1.2926.25.7.1.1.1 |
atmGenPhysEntryA entry in the table, containing information about the
physical layer of a UNI interface AtmGenPhysEntry .1.3.6.1.4.1.2926.25.7.1.1.1.1 |
atmGenPhysIndexThe physical interface instance.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.1.1.1.1 |
atmGenPhysAal5MtuThe AAL5 MTU capacity for the physical interface, assigned by PM.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.1.1.1.2 |
atmGenPhysAal5CrcErrorsThe total number of AAL5 CPCS PDUs received with CRC-32 errors
at the interface associated with an AAL5 entity.ro Counter .1.3.6.1.4.1.2926.25.7.1.1.1.1.3 |
atmGenPhysAal5OverSizedSDUsThe total number of AAL5 CPCS PDUs discarded at
the interface associated with an AAL5 entity because the
AAL5 SDUs were too large.ro Counter .1.3.6.1.4.1.2926.25.7.1.1.1.1.4 |
atmGenPhysAal5DiscardPDUThe total number of AAL5 CPCS PDUs discarded at
the interface associated with an AAL5 entity because no
receive free buffers were available. Only available with
TCOP atm card.ro Counter .1.3.6.1.4.1.2926.25.7.1.1.1.1.5 |
atmGenPhysHECErrorsThe total number ATM cells dropped out to HEC errors. Only
available with TCOP atm card.ro Counter .1.3.6.1.4.1.2926.25.7.1.1.1.1.6 |
atmGenPhysUnknownProtocolsThe total number cells received with an unknown header.
Only available with TCOP atm card.ro Counter .1.3.6.1.4.1.2926.25.7.1.1.1.1.7 |
atmGenPhysCellsReceivedThe total number ATM cells received with no errors. Only
available with TCOP atm card.ro Counter .1.3.6.1.4.1.2926.25.7.1.1.1.1.8 |
atmGenPhysCellsTransmittedThe total number ATM cells actually transmitted. Only
available with TCOP atm card.ro Counter .1.3.6.1.4.1.2926.25.7.1.1.1.1.9 |
atmGenPhysRxBufStarvationThe total number of occurrences when no Rx free buffer is available
at the interface associated with an AAL5 entity.ro Counter .1.3.6.1.4.1.2926.25.7.1.1.1.1.10 |
atmGenPhysRxFreezeThe total number of occurrences when Rx completion ring overflows
at the interface associated with an AAL5 entity.ro Counter .1.3.6.1.4.1.2926.25.7.1.1.1.1.11 |
atmGenPhysTxFreezeThe total number of occurrences when Tx completion ring overflows
at the interface associated with an AAL5 entity.ro Counter .1.3.6.1.4.1.2926.25.7.1.1.1.1.12 |
atmGenRateTableA table of ATM layer configuration for the ATM-DS3/E3/OC3c
interface. Only used by earlier version of software. SEQUENCE OF AtmGenRateEntry .1.3.6.1.4.1.2926.25.7.1.1.2 |
atmGenRateEntryA entry in the table, containing information about the
rate queues on this physical interface. AtmGenRateEntry .1.3.6.1.4.1.2926.25.7.1.1.2.1 |
atmGenRatePhysIndexThe ATM interface index, for this table the value of this
object corresponds to the physical port instance.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.1.2.1.1 |
atmGenRateQueOneThe value of this object can be set to any value in
the range 0 to 30720 for E3, the range 0 to 36864 for DS3, and
the range 0 to 135150 for OC3. The combination of all the values
of all the rate queue objects must equal 30720 for E3,
36864 for DS3, and 135150 for OC3. Thus,
if this object has a value of 36864 for DS3, then the values
of the rest of the objects cannot be set to anything
other than 0.
The value of any rate queue object is rounded down to
the nearest multiple of 10.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.1.2.1.2 |
atmGenRateQueTwoThe ATM layer rate queue number two bandwidth.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.1.2.1.3 |
atmGenRateQueThreeThe ATM layer rate queue number three bandwidth.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.1.2.1.4 |
atmGenRateQueFourThe ATM layer rate queue number four bandwidth.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.1.2.1.5 |
atmGenRateQueFiveThe ATM layer rate queue number five bandwidth.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.1.2.1.6 |
atmGenRateQueSixThe ATM layer rate queue number six bandwidth.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.1.2.1.7 |
atmGenRateQueSevenThe ATM layer rate queue number seven bandwidth.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.1.2.1.8 |
atmGenRateQueEightThe ATM layer rate queue number eight bandwidth.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.1.2.1.9 |
atmGenRateQTableA table of ATM layer configuration for the ATM-DS3/E3/OC3c
interface. Not used with TCOP atm card. SEQUENCE OF AtmGenRateQEntry .1.3.6.1.4.1.2926.25.7.1.1.3 |
atmGenRateQEntryA entry in the table, containing information about the
rate queues on this physical interface. AtmGenRateQEntry .1.3.6.1.4.1.2926.25.7.1.1.3.1 |
atmGenRateQPhysIndexThe ATM interface index, for this table the value of this
object corresponds to the physical port instance.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.1.3.1.1 |
atmGenRateQNumberThe ATM layer rate queue number.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.1.3.1.2 |
atmGenRateQueueThe value of this object can be set to any value in
the range 0 to 30720 for E3, the range 0 to 36864 for DS3, and
the range 0 to 135150 for OC3. The combination of all the values
of all the rate queue objects must equal 30720 for E3,
36864 for DS3, and 135150 for OC3. Thus,
if this object has a value of 36864 for DS3, then the values
of the rest of the objects cannot be set to anything
other than 0.
The value of any rate queue object is rounded down to
the nearest multiple of 10.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.1.3.1.3 |
atmGenericVclGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.1.2 |
atmGenVclTableThe Virtual Channel Link (VCL) table. A bi-directional VCL
is modeled as one entry in this table. SEQUENCE OF AtmGenVclEntry .1.3.6.1.4.1.2926.25.7.1.2.1 |
atmGenVclEntryAn entry in the VCL table. This entry is used to model a
bi-directional VCL. AtmGenVclEntry .1.3.6.1.4.1.2926.25.7.1.2.1.1 |
atmGenVclIfIndexThe physical interface instance.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.2.1.1.1 |
atmGenVclVpiThe VPI value of the VCL, 0 - 255.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.2.1.1.2 |
atmGenVclVciThe VCI value of the VCL. Minimum value of 32
when VPI is 0 and minimum value of 1 for all
other VPI. Maximum value of 1023 for 1561
adapter and maximum value of 4095 for 1575
tcop adapter.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.2.1.1.3 |
atmGenVclRateQThe Rate Queue used by this virtual circuit.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.2.1.1.4 |
atmGenVclActionThis object is used to create or delete a row in this table.
A set request to add a row to this table need only contain this
object's value in the PDU. The row created will be defined by the
instance passed with the object identifier. Thus, to add the
following entry: Logical Port 257, VP 1, VC 36, send a set request
with a var bind containing atmGenVclAction.257.1.36 as the object
identifier component and 5 as the value of the value component.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.2.1.1.5 |
atmGenVclTmTableThe Virtual Channel Link (VCL) table. A bi-directional VCL
is modeled as one entry in this table. SEQUENCE OF AtmGenVclTmEntry .1.3.6.1.4.1.2926.25.7.1.2.2 |
atmGenVclTmEntryAn entry in the VCL table. This entry is used to model a
bi-directional VCL. AtmGenVclTmEntry .1.3.6.1.4.1.2926.25.7.1.2.2.1 |
atmGenVclTmIfIndexThe physical interface instance.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.2.2.1.1 |
atmGenVclTmVpiThe VPI value of the VCL, 0 - 255.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.2.2.1.2 |
atmGenVclTmVciThe VCI value of the VCL. Minimum value of 32
when VPI is 0 and minimum value of 1 for all
other VPI. Maximum value of 1023 for 1561
adapter and maximum value of 4095 for 1575
tcop adapter.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.2.2.1.3 |
atmGenVclTmPCRSpecify Peak Cell Rate.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.2.2.1.4 |
atmGenVclTmSCRSpecify Sustainable Cell Rate.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.2.2.1.5 |
atmGenVclTmMBSSpecify Maximum Burst Size.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.2.2.1.6 |
atmGenVclTmActionThis object is used to create or delete a row in this table.
A set request to add a row to this table need only contain this
object's value in the PDU. The row created will be defined by the
instance passed with the object identifier. Thus, to add the
following entry: Logical Port 257, VP 1, VC 36, send a set request
with a var bind containing atmGenVclAction.257.1.36 as the object
identifier component and 5 as the value of the value if you want
to create AAL5 VC.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.2.2.1.7 |
atmGenVclStatsTableThe Virtual Channel Link (VCL) table. A bi-directional VCL
is modeled as one entry in this table. SEQUENCE OF AtmGenVclStatsEntry .1.3.6.1.4.1.2926.25.7.1.2.3 |
atmGenVclStatsEntryAn entry in the VCL table. AtmGenVclStatsEntry .1.3.6.1.4.1.2926.25.7.1.2.3.1 |
atmGenVclStatsIfIndexThe physical interface instance.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.2.3.1.1 |
atmGenVclStatsVpiThe VPI value of the VCL, 0 - 255.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.2.3.1.2 |
atmGenVclStatsVciThe VCI value of the VCL, 35 - 1023.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.2.3.1.3 |
atmGenVclStatsCellsReceivedThe total number of cells received by this virtual circuit.ro Counter .1.3.6.1.4.1.2926.25.7.1.2.3.1.4 |
atmGenVclStatsCellsTransmittedThe total number of cells transmitted by this virtual circuit.ro Counter .1.3.6.1.4.1.2926.25.7.1.2.3.1.5 |
atmGenVclStatsOamAisRcvCellsThe total number of AIS OAM cells received by this virtual circuit.ro Counter .1.3.6.1.4.1.2926.25.7.1.2.3.1.6 |
atmGenVclStatsOamAisXmtCellsThe total number of AIS OAM cells transmitted by this
virtual circuit.ro Counter .1.3.6.1.4.1.2926.25.7.1.2.3.1.7 |
atmGenVclStatsOamRdiRcvCellsThe total number of RDI OAM cells received by this virtual circuit.ro Counter .1.3.6.1.4.1.2926.25.7.1.2.3.1.8 |
atmGenVclStatsOamRdiXmtCellsThe total number of RDI OAM cells transmitted by this
virtual circuit.ro Counter .1.3.6.1.4.1.2926.25.7.1.2.3.1.9 |
atmGenVclStatsOamLoopbackRcvCellsThe total number of Loopback OAM cells received by this
virtual circuit.ro Counter .1.3.6.1.4.1.2926.25.7.1.2.3.1.10 |
atmGenVclStatsOamLoopbackXmtCellsThe total number of Loopback OAM cells transmitted by this
virtual circuit.ro Counter .1.3.6.1.4.1.2926.25.7.1.2.3.1.11 |
atmGenericLpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.1.3 |
atmGenLogicalPortTableA table of physical layer status and parameter information
for the UNI's physical interface SEQUENCE OF AtmGenLogicalPortEntry .1.3.6.1.4.1.2926.25.7.1.3.1 |
atmGenLogicalPortEntryA entry in the table, containing information about the
physical layer of a UNI interface AtmGenLogicalPortEntry .1.3.6.1.4.1.2926.25.7.1.3.1.1 |
atmGenLpIfIndexThe logical port index.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.3.1.1.1 |
atmGenLpPhysIfThe physical interface associated with this logical port.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.3.1.1.2 |
atmGenLpLoopTimeThe time (in hundredths of a second) to drop a receive frame.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.3.1.1.3 |
atmGenLpProtocolNetwork layer for the VC's attached to this LPro Enumeration .1.3.6.1.4.1.2926.25.7.1.3.1.1.4 |
atmGenLpAal5EncapsTypeAn instance of this object only exists when the local VCL
end-point is also the VCC end-point, and AAL5 is in use.
The type of data encapsulation used over the AAL5 SSCS layer.
The definitions reference RFC 1483 Multiprotocol Encapsulation
over ATM AAL5 and to the ATM Forum LAN Emulation
specification.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.3.1.1.5 |
atmGenLpAal5MtuThe PDU size for the AAL5 CPCS layer that can be processed
by the AAL5 entity, 64 - 16K.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.3.1.1.6 |
atmGenLpAal5RateQThe rate queue used by this virtual circuit.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.3.1.1.7 |
atmGenLpAdminStatusThe logical port status, just for reference. The Port Manager
has control of the status.ro Enumeration .1.3.6.1.4.1.2926.25.7.1.3.1.1.8 |
atmGenLpLoopThresholdThe number of frames receives before a snmp trap will be sent.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.3.1.1.9 |
atmGenLpLoopTrapTimeThe time (in seconds) between checks to send out snmp trap.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.3.1.1.10 |
atmGenLpOamGenerationEnable or Disable the generation of OAM cells.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.3.1.1.11 |
atmCesGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.1.4 |
cesConfTableThe CES configuration table used to manage interworking
between CBR interfaces or channels and ATM Virtual Channel
Links (VCLs). The reverse mapping is shown in the
cesMappingTable. SEQUENCE OF CesConfEntry .1.3.6.1.4.1.2926.25.7.1.4.1 |
cesConfEntryAn entry in the CES configuration table. There is one
entry in the table per ATM Port/VPI/VCI. CesConfEntry .1.3.6.1.4.1.2926.25.7.1.4.1.1 |
cesAtmPhysPortThe value of this object is equal to MIB II's
ifIndex value of the ATM Port interface mapped
through this CES IWF to a CBR interface. This value
is overwritten whenever an active or passive SVC is
established.
The distinguished value zero indicates that no ATM
interface has been specified.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.4.1.1.1 |
cesAtmVpiThe value of this object is equal to the VPI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. This value is overwritten whenever an
active or passive SVC is established.
The value is not relevant if no ATM interface has been
specified (i.e., cesAtmIndex is set to zero).ro INTEGER .1.3.6.1.4.1.2926.25.7.1.4.1.1.2 |
cesAtmVciThe value of this object is equal to the VCI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. This value is overwritten whenever an
active or passive SVC is established.
The distinguished value zero indicates that no ATM
VCL has been specified.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.4.1.1.3 |
cesCbrServiceDefine if DSx/Ex service is structured or unstructured. A
structured(2) interface is some nx64kbKbps. An unstructured
(1) interface is 1.544Mbps, 2.048Mbps, 6.312Mbps, 44.736 Mbps,
or 34.368 Mbps. unstructured(1) passes all bits through the
ATM network. strucutured(2) passes data bits through the
ATM network, and may also pass signalling bits
At this time, only unstructured mode is defined for the
44.736 Mbps and 34.368 Mbps services.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.4.1.1.4 |
cesCbrClockModeDefine if DSx/Ex service clocking mode. This maps into
transmit clock source of CBR interface.
For structured modes this value, if present, must be set to
synchronous(1).rw Enumeration .1.3.6.1.4.1.2926.25.7.1.4.1.1.5 |
cesCasThis parameter selects which AAL1 Format should be used:
Without does not carry CAS bits, and uses a single 125 usec frame.
With carris CAS bits in a multiframe structure for E1, DS1 SF, or
DS1 ESF. This applies to structured interfaces only. Default is
without (1). For unstructured interfaces this value, if present,
must be set to the default of without (1).rw Enumeration .1.3.6.1.4.1.2926.25.7.1.4.1.1.6 |
cesPartialFillIf partial cell fill is used, the number of user octets per
cell must be set with this parameter. Setting this parameter
to zero disables partial cell fill, and causes all cells to
be completely filled before they are sent.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.4.1.1.7 |
cesBufMaxSizeDefine maximum size in 10 microsecond increments of the
reassembly buffer. Some implementations may want allow the
maximum buffer size to be programmed to a size less than the
physical limit to reduce the maximum delay through a circuit.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.4.1.1.8 |
cesCdvRxTThe maximum cell arrival jitter in 10 usec increments that
the reassembly process will tolerate in the cell stream
without producing errors on the CBR service interface.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.4.1.1.9 |
cesCellLossIntegrationPeriodThe time in milliseconds for the cell loss integration period.
If a cells are continuously lost for this period of time,
cesCellLossStatus is set to loss (2). The
default definition is 2500.rw INTEGER (1000 .. 65535) .1.3.6.1.4.1.2926.25.7.1.4.1.1.10 |
cesConnTypeThe type of ATM connectivity between associated CES IWF's.
Valid values are:
other - none of the types specified below
pvc - supporting connectivity is a permanent
virtual connection
activeSvc - attempt calls whenever none established
passiveSvc - accept calls
Only pvc is supported in this release.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.4.1.1.11 |
cesDynBwThe Sonoma Dynamic Bandwidth feature may be enabled
or disabled.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.4.1.1.12 |
cesSigTypeThis is the A/B signalling type for dynamic bandwidth Idle detection.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.4.1.1.13 |
cesConfActionThe value of this object indicates whether the entry,
is to be attached or removed from the CES Configuration Table.
A value of attach has the effect of adding an entry to this table.
A value of remove has the effect of removing an entry from the table.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.4.1.1.14 |
cesStatsTableThe CES AAL1 statistical data table. SEQUENCE OF CesStatsEntry .1.3.6.1.4.1.2926.25.7.1.4.3 |
cesStatsEntryAn entry in the CES AAL1 Stats table. There is one
entry in this table corresponding to each entry in the
cesConfTable. CesStatsEntry .1.3.6.1.4.1.2926.25.7.1.4.3.1 |
cesStatsAtmPhyPortThe physical interface instance.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.4.3.1.1 |
cesStatsAtmVpiThe VPI value of the VCL, 0 - 255.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.4.3.1.2 |
cesStatsAtmVciThe VCI value of the VCL, 35 - 1023.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.4.3.1.3 |
cesReassCellsThis count gives the number of cells played out to the
CES Service Interface. It excludes cells that were
discarded for any reason, including cells that were not used
due to being declared misinserted, or discarded while the
reassembler was waiting to achieve synchronization.ro Counter .1.3.6.1.4.1.2926.25.7.1.4.3.1.4 |
cesHdrErrorsThe count of the number of AAL1 header errors detected,
including those corrected. Header errors include correctable
and uncorrectable CRC, plus bad parity.ro Counter .1.3.6.1.4.1.2926.25.7.1.4.3.1.5 |
cesPointerReframesThis records the count of the number of events in which the
AAL1 reassembler found that an SDT pointer is not where it is
expected, and the pointer must be reacquired. This count is
only meaningful for structured CES modes, as unstructured CES
modes do not use pointers. For unstructured CES modes, this
count, if present, should indicate zero.ro Counter .1.3.6.1.4.1.2926.25.7.1.4.3.1.6 |
cesPointerParityErrorsThis records the count of the number of events in which the
AAL1 reassembler detects a parity check failure at the point
where a structured data pointer is expected. This count is only
meaningful for structured CES modes, as unstructured CES modes
do not use pointers. For unstructured CES modes, this count, if
present, should indicate zero.ro Counter .1.3.6.1.4.1.2926.25.7.1.4.3.1.7 |
cesAal1SeqErrorsNumber of times that the sequence number of an incoming AAL1
Type 1 SAR-PDU causes a transition from the 'sync' state to
the 'out of sequence' state, as defined by ITU-T I.363.1.ro Counter .1.3.6.1.4.1.2926.25.7.1.4.3.1.8 |
cesLostCellsNumber of lost cells, as detected by the AAL1 sequence number
processing, for example. This records the count of the number
of cells detected as lost in the network prior to the
destination CES IWF AAL1 layer processing.ro Counter .1.3.6.1.4.1.2926.25.7.1.4.3.1.9 |
cesMisinsertedCellsNumber of AAL1 sequence violations which the AAL Convergence
sublayer interprets as a misinserted cell, as defined by
ITU-T I.363.1.ro Counter .1.3.6.1.4.1.2926.25.7.1.4.3.1.10 |
cesBufUnderflowsNumber of buffer underflows. This records the count of the
number of times the CES reassembly buffer underflows. In the
case of a continuous underflow caused by a loss of ATM cell
flow, a single buffer underflow should be counted. If the CES
IWF is implemented with multiple buffers (such as a cell level
buffer and a bit level buffer), then either buffer underflow
will cause this count to be incremented.ro Counter .1.3.6.1.4.1.2926.25.7.1.4.3.1.11 |
cesBufOverflowsNumber of buffer overflows. This records the count of the
number of times the CES reassembly buffer overflows. If the CES
IWF is implemented with multiple buffers (such as a cell level
buffer and a bit level buffer, then either buffer overflow will
cause this count to be incrementedro Counter .1.3.6.1.4.1.2926.25.7.1.4.3.1.12 |
cesCellLossStatusWhen cells are continuously lost for the number of milliseconds
specified by cesCellLossIntegrationPeriod, the value is set
to loss (2). When cells are no longer lost, the value is set
to noLoss (1).rodeprecated Enumeration .1.3.6.1.4.1.2926.25.7.1.4.3.1.13 |
cesAttachmentTableThis table is used to attach a bundle to a physical
port and DS0 channel. SEQUENCE OF CesAttachmentEntry .1.3.6.1.4.1.2926.25.7.1.4.4 |
cesAttachmentEntryThis is an entry in the attach bundle to physical port and DS0 channel
table. An entry in this table indicates if the bundle
is attached to the physical port and what DS0 channel on the physical
port the bundle is attached to, if applicable. To set an
entry in this table, ALL the objects in the entry must be present
in a single SET PDU. CesAttachmentEntry .1.3.6.1.4.1.2926.25.7.1.4.4.1 |
cesAttachmentPhysPortThe physical port number of the port to which the
bundle is being attached.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.4.4.1.1 |
cesAttachmentBundleThe bundle number. The range of settable values
for this object is 1025 to 1536.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.4.4.1.2 |
cesAttachmentChanThe value of this object indicates the DS0 channel to which
the bundle, identified by cesAttachmentBundle, is attached
or is to be attached.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.4.4.1.3 |
cesAttachmentActionThe value of this object indicates whether the bundle,
is to be attached or removed from the physical port and DS0 channel.
A value of attach has the effect of adding an entry to this table,
and either to create the bundle, or to attach it to another
physical port. A value of remove has the effect of removing
an entry from the table and if the DS0 channel is the last one
attached to the bundle then the remove action has the
effect of deleting the bundle also.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.4.4.1.4 |
atmAsiPhysGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.1.5 |
atmAsiConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.1.5.1 |
atmAsiConfPhyTableA table of physical layer configuration for the ASI
interface SEQUENCE OF AtmAsiConfPhyEntry .1.3.6.1.4.1.2926.25.7.1.5.1.1 |
atmAsiConfPhyEntryA entry in the table, containing information about the
physical layer of an ASI interface AtmAsiConfPhyEntry .1.3.6.1.4.1.2926.25.7.1.5.1.1.1 |
atmAsiConfPhysIndexThe physical interface index.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.1 |
atmAsiConfLineTypeConfigure the line type.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.2 |
atmAsiConfLineCodingConfigure the line coding.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.4 |
atmAsiConfTxClkSelectThis parameter configures the source of the Tx clock.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.5 |
atmAsiConfSignalModeThis parameter configures the signal mode.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.6 |
atmAsiConfLIUTypeThis parameter configures the Line Interface Unit type.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.7 |
atmAsiConfLBOTypeThis parameter configures the Line Build Out.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.8 |
atmAsiConfIdlePatternThis parameter configures the idle pattern for trunk
conditioning.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.9 |
atmAsiConfLoopbackModeThis parameter configures the loopback mode.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.10 |
atmAsiConfStopModeThis parameter configures the mode used for stop commands.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.11 |
atmAsiConfRecoveredClkSourceThis parameter configures the source of the recovered clock used for
through timing.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.12 |
atmAsiDebugAddrPCI Phy address for DS1 port register.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.13 |
atmAsiDebugReadValueValue read from DS1 port register.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.14 |
atmAsiDebugWriteValueValue written to DS1 port register.rw INTEGER .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.15 |
atmAsiDebugReadRead or Write of DS1 port register (TRUE = READ).rw Enumeration .1.3.6.1.4.1.2926.25.7.1.5.1.1.1.16 |
atmAsiStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.1.5.2 |
atmAsiStatsTableA table of physical layer statistics information for the ASI
interface SEQUENCE OF AtmAsiStatsEntry .1.3.6.1.4.1.2926.25.7.1.5.2.1 |
atmAsiStatsEntryA entry in the table, containing information about the
physical layer of an ASI interface AtmAsiStatsEntry .1.3.6.1.4.1.2926.25.7.1.5.2.1.1 |
atmAsiStatsPhysIndexThe physical interface index.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.1 |
atmAsiStatsNoSignalsNo signal error counter.ro Counter .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.2 |
atmAsiStatsAISDetectsAIS Detect counter.ro Counter .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.3 |
atmAsiStatsYelAlarmCountA count of the number of Yellow Alarms.ro Counter .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.4 |
atmAsiStatsLCVErrorsLCV (Line Code Violation) error counter.ro Counter .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.5 |
atmAsiStatsPCVErrorsPCV (Path Code Violation) error counter.ro Counter .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.6 |
atmAsiStatsMOSErrorsMultiframe out of sync error counter.ro Counter .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.7 |
atmAsiStatsSyncLossCountSync Loss counter.ro Counter .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.8 |
atmAsiStatsHECErrorsHEC error counter.ro Counter .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.9 |
atmAsiStatsSignalLossSignal loss indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.10 |
atmAsiStatsAISDetectAIS indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.11 |
atmAsiStatsYellowAlarmYellow Alarm indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.12 |
atmAsiStatsSyncLossLoss of sync indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.13 |
atmAsiStatsTxClockLossLoss of transmit clock indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.14 |
atmAsiStatsClearCountersClear all counters in this group ONLY.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.5.2.1.1.15 |
atmAsmPhysGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.1.6 |
atmAsmPhyConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.1.6.1 |
atmAsmPhyConfTableA table of physical layer configuration for the ASM
interfaces. SEQUENCE OF AtmAsmPhyConfEntry .1.3.6.1.4.1.2926.25.7.1.6.1.1 |
atmAsmPhyConfEntryA entry in the table, containing information about the
physical layer of an ASM interfaces. AtmAsmPhyConfEntry .1.3.6.1.4.1.2926.25.7.1.6.1.1.1 |
atmAsmPhyConfIndexThe physical interface index.ro INTEGER .1.3.6.1.4.1.2926.25.7.1.6.1.1.1.1 |
atmAsmPhyConfAdminLineUsageThe desired physical port's line usage. For some port
types, the desired line usage will become effective
after the system is rebooted.rw Enumeration .1.3.6.1.4.1.2926.25.7.1.6.1.1.1.2 |
atmAsmPhyConfOperLineUsageThe physical port's current line usage.ro Enumeration .1.3.6.1.4.1.2926.25.7.1.6.1.1.1.3 |