SONOMASYSTEMS-SONOMA-ATM-IMA-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SONOMASYSTEMS-SONOMA-ATM-IMA-MIB.
156
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
156 total| Object Name |
|---|
sonomaImaATMAdapterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.7 |
RFC1155-SMI Unknown .1.3.6.1.4.1.2926.25.7.7 |
atmImaGroupObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.7.1 |
imaGroupNumberThe number of IMA groups configured on this system.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.1 |
imaGroupTableThe IMA Group Configuration table. SEQUENCE OF ImaGroupEntry .1.3.6.1.4.1.2926.25.7.7.1.2 |
imaGroupEntryAn entry in the IMA Group table. ImaGroupEntry .1.3.6.1.4.1.2926.25.7.7.1.2.1 |
imaGroupIndexA unique value for the IMA Group.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.1 |
imaGroupRowStatusThis object identifies the IMA Group's administrative status.
It is used to enable and disable a group.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.1.2.1.2 |
imaGroupIfIndexThis object identifies the logical interface number
('ifIndex') assigned to this IMA group, and is used to identify
corresponding rows in the Interfaces MIB.
Note that re-initialization of the management agent may cause
a client's 'imaGroupIfIndex' to change.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.3 |
imaGroupNeStateThe current operational state of the near-end IMA
Group State Machine.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.1.2.1.4 |
imaGroupFeStateThe current operational state of the far-end IMA
Group State Machine.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.1.2.1.5 |
imaGroupFailureStatusThe current failure status of the IMA group (the reason why
the GTSM is in the down state.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.1.2.1.6 |
imaGroupSymmetrySymmetry of the IMA group.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.1.2.1.7 |
imaGroupMinNumTxLinksMinimum number of transmit links required to be Active for
the IMA group to be in the Up state.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.8 |
imaGroupMinNumRxLinksMinimum number of receive links required to be Active for
the IMA group to be in the Up state.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.9 |
imaGroupNeTxClkModeTransmit clocking mode used by the near-end IMA group.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.1.2.1.10 |
imaGroupFeTxClkModeTransmit clocking mode used by the far-end IMA group.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.1.2.1.11 |
imaGroupTxTimingRefLinkThe ifIndex of the transmit timing reference link to
be used by the near-end for IMA data cell clock recovery from
the ATM layer.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.12 |
imaGroupRxTimingRefLinkThe ifIndex of the receive timing reference link to be
used by near-end for IMA data cell clock recovery toward
the ATM layer.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.13 |
imaGroupLastChangeThe time-of-day the IMA group last changed operational
state (i.e., value of imaNeGroupState changed).ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.14 |
imaGroupTxImaIdThe IMA ID currently in use by the near-end IMA function.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.15 |
imaGroupRxImaIdThe IMA ID currently in use by the far-end IMA function.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.16 |
imaGroupTxFrameLengthThe frame length to be used by the IMA group in the transmit
direction. Can only be set when the IMA group is startup.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.1.2.1.17 |
imaGroupRxFrameLengthValue of IMA frame length as received from remote IMA function.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.1.2.1.18 |
imaGroupDiffDelayMaxThe maximum number of milliseconds of delay differential among
the links that will be tolerated on this interface.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.19 |
imaGroupLeastDelayLinkThe ifIndex of the link configured in the IMA
group which has the smallest link propagation delay. This
value has meaning only if at least 1 link has been configured
in the IMA group.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.20 |
imaGroupDiffDelayMaxObsThe latest maximum differential delay observed (in
milliseconds), i.e. between the links having the least and
most link propagation delay, among the receive links that
are currently configured in the IMA group.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.21 |
imaGroupAlphaValueThis indicates the 'alpha' value used to specify the
number of consecutive invalid ICP cells to be detected
before moving to the IMA HUNT state.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.22 |
imaGroupBetaValueThis indicates the 'beta' value used to specify the
number of consecutive errored ICP cells to be detected
before moving to the IMA HUNT state.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.23 |
imaGroupGammaValueThis indicates the 'gamma' value used to specify the
number of consecutive valid ICP cells to be detected before
moving to the IMA SYNC state from the PRESYNC state.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.24 |
imaGroupRunningSecsThe amount of time (in seconds) since this IMA group has
been in operation (up or down).ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.25 |
imaGroupUnavailSecsCount of one second intervals where the IMA Group Traffic
State Machine is Down.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.26 |
imaGroupNeNumFailuresThe number of times a near-end group failure (Config-Abort,
Insufficient-Links) has been reported since power-up or reboot.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.27 |
imaGroupFeNumFailuresThe number of times a far-end group failure (Config-Abort-FE,
Insufficient-Links-FE, Blocked-FE) has been reported since
power-up or reboot. This is an optional attribute.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.28 |
imaGroupTxAvailCellRateThe current cell rate (truncated value in cells per second)
provided by this IMA group in the transmit direction,
considering all the transmit links in the Active state.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.29 |
imaGroupRxAvailCellRateThe current cell rate (truncated value in cells per second)
provided by this IMA group in the receive direction,
considering all the receive links in the Active state.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.30 |
imaGroupNumTxCfgLnksThe number of links that are configured to transmit in this IMA
group.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.31 |
imaGroupNumRxCfgLnksThe number of links that are configured to receive in this IMA
group.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.32 |
imaGroupNumTxActLnksThe number of links which are configured to transmit and are
currently Active in this IMA group.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.33 |
imaGroupNumRxActLnksThe number of links which are configured to receive and are
currently Active in this IMA group.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.34 |
imaGroupTestLinkIfIndexThis object is used to designate an interface as the Test Link.
A value of -1 specifies that the implementation may choose the
Test Link. In this case, the implementation may also choose the
value of 'imaGroupTestPattern'.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.35 |
imaGroupTestPatternThe value of this object is used to specify the test pattern
in an IMA group loopback operation. A value in the range 0 to
255 designates a specific pattern. A value of -1 specifies
that the implementation may choose the value. In this case,
the implementation may also choose the value of
'imaGroupTestLinkIfIndex'.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.1.2.1.36 |
imaGroupTestProcStatusThis object is used to enable or disable the
Test Pattern Procedure, and to note whether at least one
link failed the test.
The test is started by setting operating(2) status. If any
link should fail the test, the IMA will set the status to
linkfail(3). The linkfail(3) state will persist until
either the disabled(1) state is set or until no instance
of imaLinkTestProcStatus has the value linkfail(3).
Only the values disabled(1) and operating(2) may be written.
Writing the operating(2) value will not cause clearing of
the linkfail(3) state.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.1.2.1.37 |
atmImaLinkObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.7.2 |
imaLinkTableThe IMA group Link Status and Configuration table. SEQUENCE OF ImaLinkEntry .1.3.6.1.4.1.2926.25.7.7.2.1 |
imaLinkEntryAn entry in the IMA Group Link table. ImaLinkEntry .1.3.6.1.4.1.2926.25.7.7.2.1.1 |
imaLinkIfIndexThis corresponds to the 'ifIndex' of the MIB-II interface
on which this link is established. This object also
corresponds to the logical number ('ifIndex') assigned to
this IMA link.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.1 |
imaLinkRowStatusThe imaLinkRowStatus object allows create, change and delete
operations on imaLinkTable entries.
To create a new conceptual row (or instance) of the imaLinkTable,
imaLinkRowStatus must be set to 'createAndWait' or 'createAndGo.'
A successful set of the object imaLinkGroupIndex must be
performed before the RowStatus of this new row can transition
to the 'Active' state. The imaLinkGroupIndex provides the
association between a physical IMA link to an IMA group.
To change (modify) an imaLinkTable entry, the imaLinkRowStatus
object must be set to 'notInService'. Only then can the
conceptual row be changed. Setting object imaLinkGroupIndex to
a different value has the effect of changing the association
between a physical IMA link and an IMA group. To place the
link 'in group', the imaLinkRowStatus object is set to 'Active'.
While the row is not in 'Active' state, both the Transmit and
Receive IMA state machines are in the 'Not In Group' state.
To remove (delete) an imaLinkTable entry from this table, set
this object to 'destroy.'
A network manager may elect to perform a delete operation
followed immediately by a create operation instead of a
modify operation. The net effect of the delete/create is to
re-instantiate (reset) agent counters defined in this table.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.2.1.1.2 |
imaLinkGroupIndexThe value which identifies the IMA group (imaGroupIndex)
of which this link is a member.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.2.1.1.3 |
imaLinkNeTxStateThe current state of the near-end transmit link.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.2.1.1.4 |
imaLinkNeRxStateThe current state of the near-end receive link.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.2.1.1.5 |
imaLinkFeTxStateThe current state of the far-end transmit link as reported
via ICP cells.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.2.1.1.6 |
imaLinkFeRxStateThe current state of the far-end receive link as reported
via ICP cells.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.2.1.1.7 |
imaLinkNeRxFailureStatusThe current link failure status of the near-end receive link.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.2.1.1.8 |
imaLinkFeRxFailureStatusThe current link failure status of the far-end receive link
as reported via ICP cells.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.2.1.1.9 |
imaLinkTxLidThe outgoing LID used currently on the link by the local end.
This value has meaning only if the link belongs to an IMA group.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.10 |
imaLinkRxLidThe incoming LID used currently on the link by the remote
end as reported via ICP cells. This value has meaning only
if the link belongs to an IMA group.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.11 |
imaLinkRelDelayThe latest measured delay on this link relative to the link, in
the same IMA group, with the least delay.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.12 |
imaLinkImaViolationsICP violations: count of errored, invalid or missing ICP
cells during non-SES-IMA condition.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.13 |
imaLinkOifAnomaliesThe number of OIF anomalies during non-SES-IMA condition at the
near-end. This is an optional attribute.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.14 |
imaLinkNeSevErroredSecCount of one second intervals containing several IV-IMA, or
one or more link defects (e.g., LOS, OOF/LOF, AIS, LCD), LIF, LODS
defects during non-UAS-IMA condition.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.15 |
imaLinkFeSevErroredSecCount of one second intervals containing one or more
RDI-IMA defects.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.16 |
imaLinkNeUnavailSecCount of unavailable seconds at near-end: unavailability begins
at the onset of 10 contiguous SES-IMA and ends at the onset
of 10 contiguous seconds with no SES-IMA.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.17 |
imaLinkFeUnavailSecCount of unavailable seconds at far-end: unavailability begins
at the onset of 10 contiguous SES-IMA-FE and ends at the onset of
10 contiguous seconds with no SES-IMA-FE.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.18 |
imaLinkNeTxUnusableSecTx Unusable seconds: count of Unusable seconds at the near
end Tx LSM.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.19 |
imaLinkNeRxUnusableSecRx Unusable seconds: count of Unusable seconds at the near
end Rx LSM.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.20 |
imaLinkFeTxUnusableSecTx Unusable seconds at far-end: count of seconds with Unusable
indications from the far-end Tx LSM.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.21 |
imaLinkFeRxUnusableSecRx Unusable seconds at far-end: count of seconds with Unusable
indications from the far-end Rx LSM.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.22 |
imaLinkNeTxNumFailuresThe number of times a near-end transmit failure alarm condition
has been entered on this link.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.23 |
imaLinkNeRxNumFailuresThe number of times a near-end receive failure alarm condition
has been entered on this link (i.e., LIF, LODS, Mis-Connected,
RDI-IMA).ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.24 |
imaLinkFeTxNumFailuresThe number of times a far-end transmit failure alarm condition
has been entered on this link. This is an optional attribute.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.25 |
imaLinkFeRxNumFailuresThe number of times a far-end receive failure alarm condition
has been entered on this link (i.e., LIF, LODS, Mis-Connected,
RDI-IMA). This is an optional attribute.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.26 |
imaLinkTxStuffsCounts of stuff events inserted in the transmit direction.
This is an optional attribute.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.27 |
imaLinkRxStuffsCounts of stuff events detected in the receive direction.
This is an optional attribute.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.28 |
imaLinkRxTestPatternThis object identifies the test pattern received in the
ICP Cell (octet 17) on the link during the IMA Test Pattern
Procedure. This value then may be compared to the transmitted
test pattern.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.29 |
imaLinkTestProcStatusThis value indicates the current state of the Test Pattern
Procedure. If the value is disabled(1), the test is not
running. A value of operating(2) means the test is running
and no error has been found on this interface. A value of
linkfail(3) means an error has been detected o this link
during the test.
Once an error occurs, the linkfail(3) value is latched until
either this object is read or until the imaGroupTestProcStatus
is moved to disabled(1). Once read, if the error no longer
persists, a subsequent read will report the value operating(2).ro Enumeration .1.3.6.1.4.1.2926.25.7.7.2.1.1.30 |
imaLinkNumberThis corresponds to the link number on the IMA Group.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.2.1.1.31 |
atmImaDs1Objects OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.7.3 |
imaDs1TableA table of physical layer configuration for the DS1
interface SEQUENCE OF ImaDs1Entry .1.3.6.1.4.1.2926.25.7.7.3.1 |
imaDs1EntryA entry in the table, containing information about the
physical layer of a DS1 interface ImaDs1Entry .1.3.6.1.4.1.2926.25.7.7.3.1.1 |
imaDs1IndexThe physical interface index.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.3.1.1.1 |
imaDs1GroupIndexThe IMA Group's interface index.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.3.1.1.2 |
imaDs1ConfLoopbackThis object is used to modify the state of internal
loopback....rw Enumeration .1.3.6.1.4.1.2926.25.7.7.3.1.1.3 |
imaDs1ConfTxClockSelectConfigure the transmit clock.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.3.1.1.4 |
imaDs1ConfLineCodeConfigure the line coding method.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.3.1.1.5 |
imaDs1ConfFrameFormatConfigure the framing format.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.3.1.1.6 |
imaDs1ConfCableLengthConfigure the cable length.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.3.1.1.7 |
imaDs1ConfTxTimingRefLinkThe ifIndex of the transmit timing reference link to
be used by the near-end for IMA data cell clock recovery from
the ATM layer.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.3.1.1.8 |
imaDs1ConfScrambleThe cells are scrambled / de-scrambled on the line.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.3.1.1.9 |
imaDs1StatsNoSignalsNo signal error counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.10 |
imaDs1StatsAISDetectsAIS Detect counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.11 |
imaDs1StatsYelAlarmCountA count of the number of Yellow Alarms.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.12 |
imaDs1StatsLCVErrorsLCV (Line Code Violation) error counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.13 |
imaDs1StatsPCVErrorsPCV (Path Code Violation) error counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.14 |
imaDs1StatsMOSErrorsMultiframe out of sync error counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.15 |
imaDs1StatsSyncLossCountSync Loss counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.16 |
imaDs1StatsHECErrorsHEC error counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.17 |
imaDs1StatsSignalLossSignal loss indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.3.1.1.18 |
imaDs1StatsAISDetectAIS indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.3.1.1.19 |
imaDs1StatsYellowAlarmYellow Alarm indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.3.1.1.20 |
imaDs1StatsSyncLossLoss of sync indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.3.1.1.21 |
imaDs1StatsTxClockLossLoss of transmit clock indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.3.1.1.22 |
imaDs1StatsErrSecCount of Errored Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.23 |
imaDs1StatsLineErrSecCount of Line Errored Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.24 |
imaDs1StatsErrFreeSecCount of Error Free Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.25 |
imaDs1StatsBurstErrSecCount of Bursty Errored Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.26 |
imaDs1StatsSevErrSecCount of Severely Errored Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.27 |
imaDs1StatsConSevErrSecCount of Consecutive Severely Errored Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.28 |
imaDs1StatsFailedSignalCount of Failed Signal conditions.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.29 |
imaDs1StatsUnavailSecCount of unavailable secondss.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.30 |
imaDs1StatsSevErrFramSecCount of Severely Errored Framing Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.3.1.1.31 |
imaDs1StatsClearCountersClear all counters in this group ONLY.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.3.1.1.32 |
imaDs1DebugAddrPCI Phy address for DS1 port register.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.3.1.1.33 |
imaDs1DebugReadValueValue read from DS1 port register.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.3.1.1.34 |
imaDs1DebugWriteValueValue written to DS1 port register.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.3.1.1.35 |
imaDs1DebugReadRead or Write of DS1 port register (TRUE = READ).rw INTEGER .1.3.6.1.4.1.2926.25.7.7.3.1.1.36 |
imaDs1PortNumberThe port number on the IMA.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.3.1.1.37 |
atmImaE1Objects OBJECT IDENTIFIER .1.3.6.1.4.1.2926.25.7.7.4 |
imaE1TableA table of physical layer configuration for the E1
interface SEQUENCE OF ImaE1Entry .1.3.6.1.4.1.2926.25.7.7.4.1 |
imaE1EntryA entry in the table, containing information about the
physical layer of a E1 interface ImaE1Entry .1.3.6.1.4.1.2926.25.7.7.4.1.1 |
imaE1IndexThe physical interface index.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.4.1.1.1 |
imaE1GroupIndexThe IMA Group's interface index.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.4.1.1.2 |
imaE1ConfLoopbackThis object is used to modify the state of internal
loopback....rw Enumeration .1.3.6.1.4.1.2926.25.7.7.4.1.1.3 |
imaE1ConfTxClockSelectConfigure the transmit clock.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.4.1.1.4 |
imaE1ConfLineCodeConfigure the line coding method.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.4.1.1.5 |
imaE1ConfFrameFormatConfigure the framing format.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.4.1.1.6 |
imaE1ConfCableLengthConfigure Long or Short Haul.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.4.1.1.7 |
imaE1ConfTxTimingRefLinkThe ifIndex of the transmit timing reference link to
be used by the near-end for IMA data cell clock recovery from
the ATM layer.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.4.1.1.8 |
imaE1ConfScrambleThe cells are scrambled / de-scrambled on the line.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.4.1.1.9 |
imaE1StatsNoSignalsNo signal error counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.10 |
imaE1StatsRAIDetectsRAI Detect counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.11 |
imaE1StatsFASErrorsFAS (Frame Alignment Signal) error counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.12 |
imaE1StatsCVErrorsCV (Code Violation) error counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.13 |
imaE1StatsCRCErrorsCRC4 error counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.14 |
imaE1StatsEBitErrorsE-Bit (FEBE) error counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.15 |
imaE1StatsSyncLossCountSync Loss counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.16 |
imaE1StatsHECErrorsHEC error counter.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.17 |
imaE1StatsSignalLossSignal loss indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.4.1.1.18 |
imaE1StatsRAIDetectRAI indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.4.1.1.19 |
imaE1StatsSyncLossLoss of sync indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.4.1.1.20 |
imaE1StatsTxClockLossLoss of transmit clock indication.ro Enumeration .1.3.6.1.4.1.2926.25.7.7.4.1.1.21 |
imaE1StatsErrSecCount of Errored Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.22 |
imaE1StatsLineErrSecCount of Line Errored Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.23 |
imaE1StatsErrFreeSecCount of Error Free Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.24 |
imaE1StatsBurstErrSecCount of Bursty Errored Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.25 |
imaE1StatsSevErrSecCount of Severely Errored Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.26 |
imaE1StatsConSevErrSecCount of Consecutive Severely Errored Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.27 |
imaE1StatsFailedSignalCount of Failed Signal conditions.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.28 |
imaE1StatsUnavailSecCount of unavailable secondss.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.29 |
imaE1StatsSevErrFramSecCount of Severely Errored Framing Seconds.ro Counter .1.3.6.1.4.1.2926.25.7.7.4.1.1.30 |
imaE1StatsClearCountersClear all counters in this group ONLY.rw Enumeration .1.3.6.1.4.1.2926.25.7.7.4.1.1.31 |
imaE1DebugAddrPCI Phy address for E1 port register.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.4.1.1.32 |
imaE1DebugReadValueValue read from E1 port register.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.4.1.1.33 |
imaE1DebugWriteValueValue written to E1 port register.rw INTEGER .1.3.6.1.4.1.2926.25.7.7.4.1.1.34 |
imaE1DebugReadRead or Write of E1 port register (TRUE = READ).rw INTEGER .1.3.6.1.4.1.2926.25.7.7.4.1.1.35 |
imaE1PortNumberThe port number on the IMA.ro INTEGER .1.3.6.1.4.1.2926.25.7.7.4.1.1.36 |