SIP-DS1-MIB
AI MIB Summary
The SIP-DS1-MIB module provides management and monitoring capabilities for Session Initiation Protocol (SIP) entities and T1/E1 (DS1) digital transmission interfaces, exposing specific metrics such as call session states, trunk utilization, and DS1 line status counters. It enables administrators to track SIP signaling performance alongside physical layer DS1 parameters, including framing errors, CRC errors, and signal loss events, for comprehensive VoIP and telephony infrastructure diagnostics.
The MIB module for entities implementing the xxxx protocol.
Main OID:
sipDS1.1.3.6.1.4.1.1751.1.1198.5.1
15
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
15 total| Object Name |
|---|
lucent OBJECT IDENTIFIER .1.3.6.1.4.1.1751 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1751 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1 |
softSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198 |
sipDeviceServer OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.5 |
sipDS1The MIB module for entities implementing the xxxx
protocol. MODULE-IDENTITY .1.3.6.1.4.1.1751.1.1198.5.1 |
sipSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.5.1.1 |
dsInfoDevice Server information. This value should
include the full name and version identification
and/or manufacturer information. It is mandatory
that this contains only printable ASCII charactersro DisplayString .1.3.6.1.4.1.1751.1.1198.5.1.1.1 |
dsProtocolInfoDevice Server H323/SIP stack information. This
value should include the full name and version
identification and/or manufacturer information of
the H323/SIP Stack used in the device server implementation.
It is mandatory that this contains only printable ASCII
charactersro DisplayString .1.3.6.1.4.1.1751.1.1198.5.1.1.2 |
logLevelDevice Server Log Level. A minimum logging level is
always set for the device servers, which logs errors
and warnings. If still more verbosity is required, that
can be done by setting this parameter to a required level.
1. Error
2. Warning
3. Inforw INTEGER ( 1..3 ) .1.3.6.1.4.1.1751.1.1198.5.1.1.3 |
succeededCallsTotal number of calls successfully made since the last
uptime of this device server.ro INTEGER ( 0..65535 ) .1.3.6.1.4.1.1751.1.1198.5.1.1.4 |
activeCallsNumber of calls which are still progressing at this time
by this device serverro INTEGER ( 0..65535 ) .1.3.6.1.4.1.1751.1.1198.5.1.1.5 |
failedCallsTotal Number of calls failed since the last uptime of
this device serverro INTEGER ( 0..65535 ) .1.3.6.1.4.1.1751.1.1198.5.1.1.6 |
reloadConfigThis is to tell the device server to load it's
configuration again. This is done when some configuration
parameters need to be updated in the systemrw INTEGER ( 0..1 ) .1.3.6.1.4.1.1751.1.1198.5.1.1.7 |
resetLogTo discard previous log and to start logging afresh
resetLog would be usedrw INTEGER ( 0..1 ) .1.3.6.1.4.1.1751.1.1198.5.1.1.8 |