SDSL-STATS-MIB
AI MIB Summary
The SDSL-STATS-MIB module provides SNMP definitions for monitoring performance counters and operational statistics on Single Digital Subscriber Line (SDSL) network interfaces. It enables the tracking of critical link metrics such as data throughput, error rates, and port status states for SDSL hardware devices.
This module contains definitions for SDSL Ports Stats.
Main OID:
nncSdslStatistics.1.3.6.1.4.1.123.3.64
61
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
61 total| Object Name |
|---|
nncSdslStatisticsThis module contains definitions for SDSL Ports Stats. MODULE-IDENTITY .1.3.6.1.4.1.123.3.64 |
nncSdslStatisticsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.123.3.64.1 |
nncSdslLineStatusTableTable that contains the Status of all SDSL Lines. SEQUENCE OF NncSdslLineStatusEntry .1.3.6.1.4.1.123.3.64.1.1 |
nncSdslLineStatusEntryThe Status of an SDSL Line. NncSdslLineStatusEntry .1.3.6.1.4.1.123.3.64.1.1.1 |
nncSdslLineStatusStatus indicates current state of the line. Unknown 0 Operational 1 Near End Loss Of Cell Delineation 2 Near End Loss Of Signal 3 Near End Loss Of Power 34ro INTEGER .1.3.6.1.4.1.123.3.64.1.1.1.1 |
nncSdslNearEndRawTableTable that contains the Near End RAW Stats of all SDSL Ports. SEQUENCE OF NncSdslNearEndRawEntry .1.3.6.1.4.1.123.3.64.1.2 |
nncSdslNearEndRawEntryThe Near End Raw Stats of an SDSL Port. NncSdslNearEndRawEntry .1.3.6.1.4.1.123.3.64.1.2.1 |
nncSdslNearEndRawLOSCount of the number of Loss of Signal failures since system reset.ro Counter32 .1.3.6.1.4.1.123.3.64.1.2.1.1 |
nncSdslNearEndRawLowNMCount of the number of Low Noise Margin failures since system reset.ro Counter32 .1.3.6.1.4.1.123.3.64.1.2.1.2 |
nncSdslNearEndRawLPRCount of the number of Loss of Power failures since system reset.ro Counter32 .1.3.6.1.4.1.123.3.64.1.2.1.3 |
nncSdslNearEndRawLOCDCount of the number of Loss of Cell Delineation failures since system reset.ro Counter32 .1.3.6.1.4.1.123.3.64.1.2.1.4 |
nncSdslNearEndRawCRCErrorCount of the number of CRC Errors since system reset.ro Counter32 .1.3.6.1.4.1.123.3.64.1.2.1.5 |
nncSdslNearEndCurr15MinTableTable that contains the Near End 15 minutes current Stats of all SDSL Ports. SEQUENCE OF NncSdslNearEndCurr15MinEntry .1.3.6.1.4.1.123.3.64.1.3 |
nncSdslNearEndCurr15MinEntryThe Near End 15 minutes current Stats of an SDSL Port. NncSdslNearEndCurr15MinEntry .1.3.6.1.4.1.123.3.64.1.3.1 |
nncSdslNearEndCurr15MinTimeElapsedTotal elapsed seconds in this interval. A full interval is 900 seconds.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.3.1.1 |
nncSdslNearEndCurr15MinLOSSCount of the number of seconds in Loss of Signal status not due to a Loss of Power in the current 15 minutes interval.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.3.1.2 |
nncSdslNearEndCurr15MinLOSWSCount of the number of seconds in Loss of Synch Word status not followed by a Loss of Signal in the current 15 minutes interval.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.3.1.3 |
nncSdslNearEndCurr15MinLowNMSCount of the number of seconds in Low Noise Margin status in the current 15 minutes interval.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.3.1.4 |
nncSdslNearEndCurr15MinLPRSCount of the number of seconds in Loss of Power status in the current 15 minutes interval.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.3.1.5 |
nncSdslNearEndCurr15MinErrSCount of Errored Seconds in the current 15 minutes interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.3.1.6 |
nncSdslNearEndCurr1DayTableTable that contains the Near End 1 Day current Stats of all SDSL Ports. SEQUENCE OF NncSdslNearEndCurr1DayEntry .1.3.6.1.4.1.123.3.64.1.4 |
nncSdslNearEndCurr1DayEntryThe Near End 1 Day current Stats of an SDSL Port. NncSdslNearEndCurr1DayEntry .1.3.6.1.4.1.123.3.64.1.4.1 |
nncSdslNearEndCurr1DayTimeElapsedNumber of seconds that have elapses since the beginning of the current 1 Day interval.ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.123.3.64.1.4.1.1 |
nncSdslNearEndCurr1DayLOSSCount of the number of seconds in Loss of Signal status not due to a Loss of Power during the current day.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.4.1.2 |
nncSdslNearEndCurr1DayLOSWSCount of the number of seconds in Loss of Synch Word status not followed by a Loss of Signal during the current day.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.4.1.3 |
nncSdslNearEndCurr1DayLowNMSCount of the number of seconds in Low Noise Margin status during the current day.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.4.1.4 |
nncSdslNearEndCurr1DayLPRSCount of the number of seconds in Loss of Power status during the current day.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.4.1.5 |
nncSdslNearEndCurr1DayErrSCount of Errored Seconds during the current day. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.4.1.6 |
nncSdslNearEndPrev1DayTableTable that contains the Near End 1 DAY PREVIOUS Stats of all SDSL Ports. SEQUENCE OF NncSdslNearEndPrev1DayEntry .1.3.6.1.4.1.123.3.64.1.5 |
nncSdslNearEndPrev1DayEntryThe Near End 1 Day PREVIOUS Stats of an SDSL Port. NncSdslNearEndPrev1DayEntry .1.3.6.1.4.1.123.3.64.1.5.1 |
nncSdslNearEndPrev1DayMoniSecsThe time in the PREVIOUS 1-day interval over which the performance monitoring information is actually counted. This value will normally be the same as the total interval duration except in a situation where performance monitoring information can not be collected for any reason. Typically Elapsed 1-day Time will be copied into Monitored Seconds when the 1-day roll-over occurs.ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.123.3.64.1.5.1.1 |
nncSdslNearEndPrev1DayLOSSCount of the number of seconds in Loss of Signal status not due to a Loss of Power within the most recent PREVIOUS 1 day period.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.5.1.2 |
nncSdslNearEndPrev1DayLOSWSCount of the number of seconds in Loss of Synch Word status not followed by a Loss of Signal within the most recent PREVIOUS 1 day period.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.5.1.3 |
nncSdslNearEndPrev1DayLowNMSCount of the number of seconds in Low Noise Margin status within the most recent PREVIOUS 1 day period.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.5.1.4 |
nncSdslNearEndPrev1DayLPRSCount of the number of seconds in Loss of Power status within the most recent PREVIOUS 1 day period.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.5.1.5 |
nncSdslNearEndPrev1DayErrSCount of Errored Seconds within the most recent PREVIOUS 1 day period. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.5.1.6 |
nncSdslNearEndPrev1DayValidDataThis variable indicates if there is valid data for this interval.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.123.3.64.1.5.1.7 |
nncSdslFarEndAllTableTable that contains ALL the Far End Stats of all SDSL Ports. SEQUENCE OF NncSdslFarEndAllEntry .1.3.6.1.4.1.123.3.64.1.6 |
nncSdslFarEndAllEntryALL the Far End Stats of an SDSL Port. NncSdslFarEndAllEntry .1.3.6.1.4.1.123.3.64.1.6.1 |
nncSdslFarEndRawLOCDCount of the number of Loss of Cell Delineation failures since system reset.ro Counter32 .1.3.6.1.4.1.123.3.64.1.6.1.1 |
nncSdslFarEndCurr15MinTimeElapsedTotal elapsed seconds in this interval. A full interval is 900 seconds.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.6.1.2 |
nncSdslFarEndCurr15MinErrSCount of Errored Seconds in the current 15 minutes interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.6.1.3 |
nncSdslFarEndCurr1DayTimeElapsedNumber of seconds that have elapses since the beginning of the current 1 Day interval.ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.123.3.64.1.6.1.4 |
nncSdslFarEndCurr1DayErrSCount of Errored Seconds in the current 15 minutes interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.6.1.5 |
nncSdslFarEndPrev1DayMoniSecsThe time in the PREVIOUS 1-day interval over which the performance monitoring information is actually counted. This value will normally be the same as the total interval duration except in a situation where performance monitoring information can not be collected for any reason. Typically Elapsed 1-day Time will be copied into Monitored Seconds when the 1-day roll-over occurs.ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.123.3.64.1.6.1.6 |
nncSdslFarEndPrev1DayErrSCount of Errored Seconds within the most recent PREVIOUS 1 day period. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.6.1.7 |
nncSdslFarEndPrev1DayValidDataThis variable indicates if there is valid data for this interval.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.123.3.64.1.6.1.8 |
nncSdslNearEndIntTableTable that contains the Near End 15 Minutes Intervals Stats of all SDSL Ports. SEQUENCE OF NncSdslNearEndIntEntry .1.3.6.1.4.1.123.3.64.1.7 |
nncSdslNearEndIntEntryOne interval of Near End Stats of an SDSL Port. NncSdslNearEndIntEntry .1.3.6.1.4.1.123.3.64.1.7.1 |
nncSdslNearEndIntNumberPerformance Data Interval number. 1 is the the most recent interval; interval 96 is 24 hours ago. Interval 2..96 are optional. INTEGER .1.3.6.1.4.1.123.3.64.1.7.1.1 |
nncSdslNearEndIntLOSSCount of seconds in the interval when there was Loss of Signal not due to a Loss of Power.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.7.1.2 |
nncSdslNearEndIntLOSWSCount of seconds in the interval when there was Loss of Signal not folloew by Loss of Signal.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.7.1.3 |
nncSdslNearEndIntLowNMSCount of seconds in the interval when there was Low Noise Margin.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.7.1.4 |
nncSdslNearEndIntLPRSCount of seconds in the interval when there was Loss of Power.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.7.1.5 |
nncSdslNearEndIntErrSCount of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.7.1.6 |
nncSdslNearEndIntValidDataThis variable indicates if there is valid data for this interval.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.123.3.64.1.7.1.7 |
nncSdslFarEndIntTableTable that contains the Far End 15 Minutes Intervals Stats of all SDSL Ports. SEQUENCE OF NncSdslFarEndIntEntry .1.3.6.1.4.1.123.3.64.1.8 |
nncSdslFarEndIntEntryOne interval of Far End Stats of an SDSL Port. NncSdslFarEndIntEntry .1.3.6.1.4.1.123.3.64.1.8.1 |
nncSdslFarEndIntNumberPerformance Data Interval number. 1 is the the most recent interval; interval 96 is 24 hours ago. Interval 2..96 are optional. INTEGER .1.3.6.1.4.1.123.3.64.1.8.1.1 |
nncSdslFarEndIntErrSCount of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.ro Gauge32 .1.3.6.1.4.1.123.3.64.1.8.1.2 |
nncSdslFarEndIntValidDataThis variable indicates if there is valid data for this interval.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.123.3.64.1.8.1.3 |
More MIBs from Newbridge
Browse all NewbridgeMIBs →NNCEXTCALLROUTINGSTATS-MIB
The NNCEXTCALLROUTINGSTATS-MIB monitors performance and fault metrics for ATM PNNI and static routing on Nortel (now Avaya) NNCE (Network Node Control Element) hardware, specifically tracking call setup success rates, crankback events, DTL generation, and bandwidth allocation failures across non-border and border nodes. It provides granular, interval-based counters for routing table descriptors to distinguish between originating, transiting, and terminating call states, enabling the detection of routing loops, CAC failures, and re-routing efficiency within the PNNI domain.
468 objects→
NNCFRINTSTATISTICS-MIB
The NNCFRINTSTATISTICS-MIB module enables performance monitoring of Frame Relay stream traffic on Cisco devices by exposing interface-level counters for data transmission, reception, and error statistics. This MIB facilitates the tracking of Frame Relay-specific metrics such as CIR, FECN, BECN, and discard counts to assess link health and throughput efficiency.
258 objects→
NEWBRIDGE-MIB
SNMP MIB module
215 objects→
NNCEXTSPVC-MIB
SNMP MIB module
206 objects→
NNCEXTSVCSIGSTATS-MIB
The NNCEXTSVCSIGSTATS-MIB module provides performance monitoring counters for Asynchronous Transfer Mode (ATM) Switched Virtual Circuit (SVC) signaling functions, specifically tracking the establishment, maintenance, and teardown of signaling sessions within Cisco's Network Control and Management Environment (NCME). It enables administrators to quantify signaling traffic volume, error rates, and session state transitions to diagnose connectivity issues and validate SVC provisioning on ATM-based network infrastructure.
192 objects→
NNC-ATM-STATISTICS-MIB
The NNC-ATM-STATISTICS-MIB enables performance monitoring of Asynchronous Transfer Mode (ATM) Virtual Path Links (VPL), Virtual Channel Links (VCL), and Virtual Path Aggregations (VPA) by tracking cell counts, OAM cell statistics, and error metrics across 15-minute and 1-hour historical intervals. This module facilitates granular traffic analysis and fault detection on ATM hardware by providing current and interval-based counters for valid, admitted, and idle cells aligned to wall-clock time boundaries.
157 objects→