SALIX-ITX-MIB
AI MIB Summary
The SALIX-ITX-MIB provides vendor-specific SNMP objects for monitoring and managing Salix ITX enterprise hardware, typically exposing interface statistics, system health indicators, and device configuration parameters for the Salix ITX platform.
The ITX enterprise specific MIB
Main OID:
itxMIB.1.3.6.1.4.1.7745.5.4.1
47
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
47 total| Object Name |
|---|
itxMIBThe ITX enterprise specific MIB MODULE-IDENTITY .1.3.6.1.4.1.7745.5.4.1 |
itxMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4.1.1 |
itxSystem OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4.1.1.1 |
itxDsp OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4.1.1.2 |
itxDspStatusTableThe itxDspStatusTable provides a means to find the
status of a specific DSP. There are 64 (8x8)
entries for each Transcoder plug-in SEQUENCE OF ItxDspStatusEntry .1.3.6.1.4.1.7745.5.4.1.1.2.1 |
itxDspStatusEntryThis sequence contains information to identify
the specific DSP on a specific Transcoder plug-in.
In addition, it also contains the Operational
Status for the specified DSP ItxDspStatusEntry .1.3.6.1.4.1.7745.5.4.1.1.2.1.1 |
itxDspStatusPhysIndexThe entPhysicalIndex that uniqely identifies the
DSP complex on the Transcoder plug-in. PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.7745.5.4.1.1.2.1.1.1 |
itxDspStatusRowThe row in the DSP complex for the DSP entry.
When used together with itxDspStatusColumn, the
exact DSP in the DSP complex can be found INTEGER .1.3.6.1.4.1.7745.5.4.1.1.2.1.1.2 |
itxDspStatusColumnThe column in the DSP complex for the DSP entry.
When used together with itxDspStatusRow, the
exact DSP in the DSP complex can be found INTEGER .1.3.6.1.4.1.7745.5.4.1.1.2.1.1.3 |
itxDspStatusOperStatusThe Operational status of the specified DSP.
up(1) - The DSP is operational
down(2) - The DSP is not operational
unknown(3) - The Operational Status of the DSP
is not knownro Enumeration .1.3.6.1.4.1.7745.5.4.1.1.2.1.1.4 |
itxMediaController OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4.1.1.3 |
itxMediaControllerPrimaryIpAddressThe IP Address for the Primary Media Controllerrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.3.1 |
itxMediaControllerPrimaryPortThe port for the Primary Media Controllerrw INTEGER .1.3.6.1.4.1.7745.5.4.1.1.3.2 |
itxMediaControllerSecondaryIpAddressThe IP Address for the Secondary Media Controllerrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.3.3 |
itxMediaControllerSecondaryPortThe port for the Secondary Media Controllerrw INTEGER .1.3.6.1.4.1.7745.5.4.1.1.3.4 |
itxMediaControllerActiveControllerThe configured active Media Controller the Call Control is using
to handle call management. Writing a value that is different
from its current value will force Call Control to switch to
using the specified Media Controller.
primary(1) - The Primary Media Contrller is the active
controller
secondary (2) - The Secondary Media Contrller is the active
controllerrw Enumeration .1.3.6.1.4.1.7745.5.4.1.1.3.5 |
itxIsdnBackHaulMediaControllerIpAddressThe IP Address for the ISDN BackHaul Media Controllerrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.3.6 |
itxIsdnBackHaulMediaControllerPortThe port for the ISDN BackHaul Media Controllerrw INTEGER .1.3.6.1.4.1.7745.5.4.1.1.3.7 |
itxMediaSubnetThe subnet from which media IP address are selected fromrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.4 |
itxMediaSubnetMaskThe subnet mask from which media IP address are selected fromrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.5 |
itxNetworkManagementAddressThe IP Address for the NMS Agentrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.7 |
itxNetworkManagementSubnetMaskThe Subnet Mask for the NMS Agentrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.8 |
itxCallControlAddressThe Subnet for Call Controlrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.10 |
itxCallControlSubnetMaskThe SubnetMask for Call Controlrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.11 |
itxSnmpManagementEntityIpAddressThe Ip Address for SNMP Management Entity for the Agent (ITX)
to send the traps to. Used together with the
itxSnmpManagementEntityPort to fully specify the Entityrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.13 |
itxSnmpManagementEntityPortThe Port for SNMP Management Entity for the Agent (ITX)
to send the traps to. Used together with the
itxSnmpManagementEntityIpAddress to fully specify the Entityrw INTEGER .1.3.6.1.4.1.7745.5.4.1.1.14 |
itxEthernetTableThe ITX default Gateway for ethernet interfaces. SEQUENCE OF ItxEthernetEntry .1.3.6.1.4.1.7745.5.4.1.1.15 |
itxEthernetEntryThe Default Gateway entry is indexed by ifIndex.
The entry contains the Ip address for the default
gateway for the specified Ethernet interface.
There are no entries in the table for non-ethernet
interfaces and exactly one for each ethernet
interface ItxEthernetEntry .1.3.6.1.4.1.7745.5.4.1.1.15.1 |
itxDefaultGatewayThe IP Address of the default gatewayrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.15.1.1 |
itxIpAddressThe IP Address of the interfacerw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.15.1.2 |
itxSubnetMaskThe Subnetmask of the interface. One of these
objects exists for each of the ethernet interface in
the chassisrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.15.1.3 |
itxCallControlProtocolThe IPDC protocol version number
version0dot15(1) - IPDC Version 0.15,
sgcpVersion0(2) - SGCP Version 0,
mgcpVersion0.1(3) - MGCP Version 0.1rw Enumeration .1.3.6.1.4.1.7745.5.4.1.1.16 |
itxCompandingLawThe value selects either aLaw or muLaw as the companding lawrw Enumeration .1.3.6.1.4.1.7745.5.4.1.1.18 |
itxDnsIpAddressThe Ip Address for the Domain Name server the system should
use to map hostnames to Ip Addressesrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.19 |
itxHostnameThe Fully Qualified Hostname for the system (includes both
the hostname and the domain name. i.e.:
etx5000.salix.com
would be a valid valuero DisplayString .1.3.6.1.4.1.7745.5.4.1.1.20 |
itxEthernetLoadSharingThis object controls Ethernet Load Sharing across
multiple Ethernet Interfaces. The default value is
enabled. By setting the value to disabled, calls
will no longer be load shared across ethernet interfacesrw Enumeration .1.3.6.1.4.1.7745.5.4.1.1.21 |
itxNFSObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4.1.1.22 |
itxNFSIpAddressThis object controls the Ip Address that the ETX will
mount its file system from. Any changes to this
object while there is a currently mounted file system
will not be effective until the currently mounted file
system is unmountedrw IpAddress .1.3.6.1.4.1.7745.5.4.1.1.22.1 |
itxNFSPathThis object controls the Path that the ETX will
mount its file system from. Any changes to this
object while there is a currently mounted file system
will not be effective until the currently mounted file
system is unmountedrw DisplayString .1.3.6.1.4.1.7745.5.4.1.1.22.2 |
itxNFSUserIdThis object controls the User Id (uid) that the ETX
will use when communicating with the NFS server. Any
changes to this object while there is a currently
mounted file system will not be effective until the
currently mounted file system is unmountedrw Integer32 .1.3.6.1.4.1.7745.5.4.1.1.22.3 |
itxNFSGroupIdThis object controls the Group Id (gid) that the ETX
will use when communicating with the NFS server. Any
changes to this object while there is a currently
mounted file system will not be effective until the
currently mounted file system is unmountedrw Integer32 .1.3.6.1.4.1.7745.5.4.1.1.22.4 |
itxNFSStatusThis object shows the current status of the nfs
connection. In addition, the nfs volume can be
mounted and unmounted by writing the approriate value
to this objectrw Enumeration .1.3.6.1.4.1.7745.5.4.1.1.22.5 |
itxMIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4.1.2 |
itxMIBTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4.1.2.0 |
itxMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4.1.3 |
itxGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4.1.3.1 |
itxCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4.1.3.2 |