AETHRA-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for AETHRA-MIB.
187
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
187 total| Object Name |
|---|
aethra OBJECT IDENTIFIER .1.3.6.1.4.1.7745 |
IMPORTS Unknown .1.3.6.1.4.1.7745 |
atosnt OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5 |
tools OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.1 |
fileTransfer OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.1.1 |
fileTransferProtocolSet this parameter to configure the protocol for file transfer command.
The protocol file(4) reads from a local disk for download command,
writes to a local disk for upload.
OID: 1.3.6.1.4.1.7745.5.1.1.1rw Enumeration .1.3.6.1.4.1.7745.5.1.1.1 |
fileTransferFileNameSet this parameter to configure the name of the file to download or upload.
When using HTTP protocol set full url as fileTransferFileName.
OID: 1.3.6.1.4.1.7745.5.1.1.2rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.1.1.2 |
fileTransferServerNameSet this parameter to configure the name or IP address of remote server
when using TFTP or FTP protocol. When not configured systemDefaultTftpServer
or systemDefaultFtpServer is used for the respective protocols.
OID: 1.3.6.1.4.1.7745.5.1.1.3rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.1.1.3 |
fileTransferOptionSet this parameter to configure the type of file you are downloading or uploading.
When not configured firmware type is used.
firmware(1) is the operating system file,
boot(2) is the system boot,
userconf(3) is the current system configuration file,
logs(4) is the logs file and is available only for upload command,
package(5) is bundle is a package that contains boot and os in a single file,
localfile(6) is any file you want to download or upload in the system,
welcome(7) is a text message displayed before access to system console by telnet or ssh,
license(8) is a license file to enable advanced system features,
certificate(9) is the custom certificate file for the security protocol system (SSL),
defaultconf(10) is the custom default configuration file,
bannerPre(10) is available only from version 5.6.11, is a custom pre login banner file,
bannerPost(10)is available only from version 5.6.11, is a custom post login banner file.
OID: 1.3.6.1.4.1.7745.5.1.1.4rw Enumeration .1.3.6.1.4.1.7745.5.1.1.4 |
fileTransferStorageFileNameSet this parameter to configure the name of the local file when using file(4) protocol.
OID: 1.3.6.1.4.1.7745.5.1.1.5rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.1.1.5 |
fileTransferExecSet this parameter to start download or upload.
OID: 1.3.6.1.4.1.7745.5.1.1.6rw Enumeration .1.3.6.1.4.1.7745.5.1.1.6 |
fileTransferStatusGet this parameter to read the current status of file transfer command.
OID: 1.3.6.1.4.1.7745.5.1.1.7ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.1.1.7 |
ping OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.1.2 |
pingParameters OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.1.2.1 |
pingHostSet this parameter to configure the host name or IP address to ping.
OID: 1.3.6.1.4.1.7745.5.1.2.1.1rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.1.2.1.1 |
pingSizeSet this parameter to configure the size of ping packet.
OID: 1.3.6.1.4.1.7745.5.1.2.1.2rw INTEGER .1.3.6.1.4.1.7745.5.1.2.1.2 |
pingTriesSet this parameter to configure the number of ping tries.
OID: 1.3.6.1.4.1.7745.5.1.2.1.3rw INTEGER .1.3.6.1.4.1.7745.5.1.2.1.3 |
pingTTLSet this parameter to configure ping TTL option.
OID: 1.3.6.1.4.1.7745.5.1.2.1.4rw INTEGER .1.3.6.1.4.1.7745.5.1.2.1.4 |
pingTimeOutSet this parameter to configure ping response timeout (sec).
OID: 1.3.6.1.4.1.7745.5.1.2.1.5rw INTEGER .1.3.6.1.4.1.7745.5.1.2.1.5 |
pingSourceSet this parameter to configure the name or IP address of the ping source.
OID: 1.3.6.1.4.1.7745.5.1.2.1.6rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.1.2.1.6 |
pingStartSet this parameter to start ping.
OID: 1.3.6.1.4.1.7745.5.1.2.1.7rw Enumeration .1.3.6.1.4.1.7745.5.1.2.1.7 |
pingStatusGet this parameter to read the current status of ping command.
OID: 1.3.6.1.4.1.7745.5.1.2.1.8ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.1.2.1.8 |
pingStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.1.2.2 |
pingTXpacketGet this parameter to read the number of packets transmitted.
OID: 1.3.6.1.4.1.7745.5.1.2.2.1ro INTEGER .1.3.6.1.4.1.7745.5.1.2.2.1 |
pingRXpacketGet this parameter to read the number of packets received.
OID: 1.3.6.1.4.1.7745.5.1.2.2.2ro INTEGER .1.3.6.1.4.1.7745.5.1.2.2.2 |
pingLOSTpacketGet this parameter to read the number of packets losted.
OID: 1.3.6.1.4.1.7745.5.1.2.2.3ro INTEGER .1.3.6.1.4.1.7745.5.1.2.2.3 |
pingMinRTTGet this parameter to read the minimum Round Trip Time (RTT) value.
OID: 1.3.6.1.4.1.7745.5.1.2.2.4ro INTEGER .1.3.6.1.4.1.7745.5.1.2.2.4 |
pingMaxRTTGet this parameter to read the maximum Round Trip Time (RTT) value.
OID: 1.3.6.1.4.1.7745.5.1.2.2.5ro INTEGER .1.3.6.1.4.1.7745.5.1.2.2.5 |
pingAvgRTTGet this parameter to read the average Round Trip Time (RTT) value.
OID: 1.3.6.1.4.1.7745.5.1.2.2.6ro INTEGER .1.3.6.1.4.1.7745.5.1.2.2.6 |
system OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.2 |
systemLoglevelSet this parameter to configure the log level of the node system.
OID: 1.3.6.1.4.1.7745.5.2.1rw INTEGER .1.3.6.1.4.1.7745.5.2.1 |
systemDescriptionSet this parameter to configure system description.
OID: 1.3.6.1.4.1.7745.5.2.2rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.2.2 |
systemNameSet this parameter to configure system name, it's also used as network hostname.
OID: 1.3.6.1.4.1.7745.5.2.3rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.2.3 |
systemLocalDomainSet this parameter to configure system local domain, it's also used as network workgroup.
OID: 1.3.6.1.4.1.7745.5.2.4rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.2.4 |
systemDefaultTftpServerSet this parameter to configure the name or IP address for the default remote TFTP server.
OID: 1.3.6.1.4.1.7745.5.2.5rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.2.5 |
systemTftpLocalAddSet this parameter to configure the name or the local IP address used by the TFTP client.
OID: 1.3.6.1.4.1.7745.5.2.6rw IpAddress .1.3.6.1.4.1.7745.5.2.6 |
systemDefaultFtpServerSet this parameter to configure the name or IP address and port for the default remote FTP server.
OID: 1.3.6.1.4.1.7745.5.2.7rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.2.7 |
systemFtpLocalAddSet this parameter to configure the name or the local IP address used by the FTP client.
OID: 1.3.6.1.4.1.7745.5.2.8rw IpAddress .1.3.6.1.4.1.7745.5.2.8 |
systemFtpUsernameSet this parameter to configure the username for the default remote FTP server.
OID: 1.3.6.1.4.1.7745.5.2.9rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.2.9 |
systemFtpPasswordSet this parameter to configure the password for the default remote FTP server.
OID: 1.3.6.1.4.1.7745.5.2.10rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.2.10 |
systemAAAProfileSet this parameter to configure the AAA profile used by the system.
OID: 1.3.6.1.4.1.7745.5.2.11rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.2.11 |
systemAAALogTimeoutSet this parameter to configure the AAA login timeout.
OID: 1.3.6.1.4.1.7745.5.2.12rw INTEGER .1.3.6.1.4.1.7745.5.2.12 |
systemBackupAuthSet this parameter to enable the backup authentication system.
OID: 1.3.6.1.4.1.7745.5.2.13rw Enumeration .1.3.6.1.4.1.7745.5.2.13 |
systemScrollLineSet this parameter to enable the system scroll line.
OID: 1.3.6.1.4.1.7745.5.2.14rw INTEGER .1.3.6.1.4.1.7745.5.2.14 |
systemKernelLogsSet this parameter to enable the system kernel logs
OID: 1.3.6.1.4.1.7745.5.2.15rw Enumeration .1.3.6.1.4.1.7745.5.2.15 |
systemCryptedPasswordSet this parameter to enable the system crypted password.
OID: 1.3.6.1.4.1.7745.5.2.16rw Enumeration .1.3.6.1.4.1.7745.5.2.16 |
systemSaveSet this parameter to save current configuration.
OID: 1.3.6.1.4.1.7745.5.2.17rw Enumeration .1.3.6.1.4.1.7745.5.2.17 |
systemRestart OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.2.18 |
restartOptionSet this parameter to choose restart command option.
saveConf(0) saving configuration changes before restart the system,
notSaveConf(1) restart the system without saving configuration changes,
restoreDefaultConf(2) restart the system with the default configuration,
restoreFactoryDefault(3) available only from version 5.6.14,
restart the system with the factory default.
OID: 1.3.6.1.4.1.7745.5.2.18.1rw Enumeration .1.3.6.1.4.1.7745.5.2.18.1 |
restartDelaySet this parameter to configure restart timeout (sec).
OID: 1.3.6.1.4.1.7745.5.2.18.2rw INTEGER .1.3.6.1.4.1.7745.5.2.18.2 |
restartExecSet this parameter to restart the system.
OID: 1.3.6.1.4.1.7745.5.2.18.3rw Enumeration .1.3.6.1.4.1.7745.5.2.18.3 |
restartStatusGet this parameter to read the current status of restart command.
OID: OID: 1.3.6.1.4.1.7745.5.2.18.4ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.2.18.4 |
performance OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.2.19 |
performanceCpuAvg1minGet this parameter to read the CPU average utilization in 1 minute (in %).
OID: 1.3.6.1.4.1.7745.5.2.19.1ro INTEGER .1.3.6.1.4.1.7745.5.2.19.1 |
performanceCpuAvg5minGet this parameter to read the CPU average utilization in 5 minute (in %).
OID: 1.3.6.1.4.1.7745.5.2.19.2ro INTEGER .1.3.6.1.4.1.7745.5.2.19.2 |
performanceCpuAvg15minGet this parameter to read the CPU average utilization in 15 minute (in %).
OID: 1.3.6.1.4.1.7745.5.2.19.3ro INTEGER .1.3.6.1.4.1.7745.5.2.19.3 |
performanceDynMemLoadGet this parameter to read the usage of dynamic memory (in %).
OID: 1.3.6.1.4.1.7745.5.2.19.4ro INTEGER .1.3.6.1.4.1.7745.5.2.19.4 |
performanceDynMemTotalGet this parameter to read the total dynamic memory (in KBytes).
OID: 1.3.6.1.4.1.7745.5.2.19.5ro INTEGER .1.3.6.1.4.1.7745.5.2.19.5 |
performanceDynMemFreeGet this parameter to read the free dynamic memory (in KBytes).
OID: 1.3.6.1.4.1.7745.5.2.19.6ro INTEGER .1.3.6.1.4.1.7745.5.2.19.6 |
systemDefaultScpServerSet this parameter to configure the name or IP address and port for the default remote SCP server.
OID: 1.3.6.1.4.1.7745.5.2.20rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.2.20 |
systemScpUsernameSet this parameter to configure the username for the default remote SCP server.
OID: 1.3.6.1.4.1.7745.5.2.21rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.2.21 |
systemScpPasswordSet this parameter to configure the password for the default remote SCP server.
OID: 1.3.6.1.4.1.7745.5.2.22rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.2.22 |
systemConsoleEnableSet this parameter to enable or disable serial console.
OID: 1.3.6.1.4.1.7745.5.2.23rw Enumeration .1.3.6.1.4.1.7745.5.2.23 |
systemLogMsgRateSet this parameter to configure the maximum number of log messages per minute.
A value set to 0 (zero) is equivalent to unlimited.
OID: 1.3.6.1.4.1.7745.5.2.24rw INTEGER .1.3.6.1.4.1.7745.5.2.24 |
dsl OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.3 |
xdsl OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.3.1 |
xdslTableThis is a table showing the list of xdsl interface entries.
OID: 1.3.6.1.4.1.7745.5.3.1.1 SEQUENCE OF XdslEntry .1.3.6.1.4.1.7745.5.3.1.1 |
xdslEntryOID: 1.3.6.1.4.1.7745.5.3.1.1.1 XdslEntry .1.3.6.1.4.1.7745.5.3.1.1.1 |
xdslIndexGet this parameter to read the index of the row.
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.1ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.1 |
xdslLinkStatusGet this parameter to read the link status.
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.3.1.1.1.2 |
xdslTcGet this parameter to read link transmission convergence.
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.3.1.1.1.3 |
xdslUsAttenuationGet this parameter to read link upstream attenuation (0.1 dB steps).
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.4ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.4 |
xdslDsAttenuationGet this parameter to read link downstream attenuation (0.1 dB steps).
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.5ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.5 |
xdslUsNoiseMarginGet this parameter to read link upstream noise margin (0.1 dB steps).
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.6ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.6 |
xdslDsNoiseMarginGet this parameter to read link downstream noise margin (0.1 dB steps).
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.7ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.7 |
xdslUsCurrRateGet this parameter to read link upstream current rate (in Kbps).
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.8ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.8 |
xdslDsCurrRateGet this parameter to read link downstream current rate (in Kbps).
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.9ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.9 |
xdslModulationTypeGet this parameter to read link modulation type.
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.10ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.3.1.1.1.10 |
xdslUsMaxTheorRateGet this parameter to read link upstream attainable max rate (in Kbps).
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.11ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.11 |
xdslDsMaxTheorRateGet this parameter to read link downstream attainable max rate (in Kbps).
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.12ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.12 |
xdslUsTotBytesGet this parameter to read link upstream total bytes.
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.13ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.13 |
xdslDsTotBytesGet this parameter to read link downstream total bytes.
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.14ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.14 |
xdslNeTotCrcErrGet this parameter to read link near-end total CRC errors.
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.15ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.15 |
xdslNeShowtimeCrcErrGet this parameter to read link near-end last showtime CRC errors.
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.16ro INTEGER .1.3.6.1.4.1.7745.5.3.1.1.1.16 |
shdsl OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.3.2 |
shdslTableThis is a table showing the list of shdsl physical interface entries.
OID: 1.3.6.1.4.1.7745.5.3.2.1 SEQUENCE OF ShdslEntry .1.3.6.1.4.1.7745.5.3.2.1 |
shdslEntryOID: 1.3.6.1.4.1.7745.5.3.2.1.1 ShdslEntry .1.3.6.1.4.1.7745.5.3.2.1.1 |
shdslIndexGet this parameter to read the index of the row.
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.1ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.1 |
shdslPhyStatusGet this parameter to read physical status.
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.3.2.1.1.2 |
shdslTcGet this parameter to read physical transmission convergence.
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.3.2.1.1.3 |
shdslUsAttenuationGet this parameter to read physical upstream attenuation (0.1 dB steps).
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.4ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.4 |
shdslDsAttenuationGet this parameter to read physical downstream attenuation (0.1 dB steps).
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.5ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.5 |
shdslUsNoiseMarginGet this parameter to read physical upstream noise margin (0.1 dB steps).
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.6ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.6 |
shdslDsNoiseMarginGet this parameter to read physical downstream noise margin (0.1 dB steps).
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.7ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.7 |
shdslUsCurrRateGet this parameter to read physical upstream current rate (in Kbps).
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.8ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.8 |
shdslDsCurrRateGet this parameter to read physical downstream current rate (in Kbps).
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.9ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.9 |
shdslModulationTypeGet this parameter to read physical modulation type.
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.10ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.3.2.1.1.10 |
shdslUsMaxTheorRateGet this parameter to read physical upstream attainable max rate (in Kbps).
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.11ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.11 |
shdslDsMaxTheorRateGet this parameter to read physical downstream attainable max rate (in Kbps).
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.12ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.12 |
shdslUsTotBytesGet this parameter to read physical upstream total bytes.
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.13ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.13 |
shdslDsTotBytesGet this parameter to read physical downstream total bytes.
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.14ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.14 |
shdslNeTotCrcErrGet this parameter to read physical near-end total CRC errors.
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.15ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.15 |
shdslNeShowtimeCrcErrGet this parameter to read physical near-end last showtime CRC errors.
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.16ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.16 |
shdslUsPowerGet this parameter to read physical Us Power.
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.17ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.17 |
shdslDsPowerGet this parameter to read physical Ds Power.
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.18ro INTEGER .1.3.6.1.4.1.7745.5.3.2.1.1.18 |
voip OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4 |
trunk OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4.1 |
trunkTableThis is a table showing the list of configured voip SIP trunk.
OID: 1.3.6.1.4.1.7745.5.4.1.1 SEQUENCE OF TrunkEntry .1.3.6.1.4.1.7745.5.4.1.1 |
trunkEntryOID: 1.3.6.1.4.1.7745.5.4.1.1.1 TrunkEntry .1.3.6.1.4.1.7745.5.4.1.1.1 |
trunkIndexGet this parameter to read the index of the row.
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.1ro INTEGER .1.3.6.1.4.1.7745.5.4.1.1.1.1 |
trunkNameGet this parameter to read trunk name.
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.1.1.2 |
trunkTypeGet this parameter to read trunk type.
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.1.1.3 |
trunkEnableGet this parameter to read trunk registration enable.
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.4rw Enumeration .1.3.6.1.4.1.7745.5.4.1.1.1.4 |
trunkDescriptionGet this parameter to read trunk description.
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.5ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.1.1.5 |
trunkUserNameGet this parameter to read trunk username.
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.6ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.1.1.6 |
trunkRegHostGet this parameter to read trunk registar host.
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.7ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.1.1.7 |
trunkProxyHostGet this parameter to read trunk proxy host.
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.8ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.1.1.8 |
trunkIfcStatusGet this parameter to read trunk interface status.
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.9ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.1.1.9 |
trunkRegStatusGet this parameter to read trunk registration status.
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.10ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.1.1.10 |
trunkMsgWaitGet this parameter to read trunk message wait status.
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.11ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.1.1.11 |
trunkIsdnTableThis is a table showing the list of configured voip ISDN trunk.
OID: 1.3.6.1.4.1.7745.5.4.1.2 SEQUENCE OF TrunkIsdnEntry .1.3.6.1.4.1.7745.5.4.1.2 |
trunkIsdnEntryOID: 1.3.6.1.4.1.7745.5.4.1.2.1 TrunkIsdnEntry .1.3.6.1.4.1.7745.5.4.1.2.1 |
trunkIsdnIndexGet this parameter to read the index of the row.
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.1ro INTEGER .1.3.6.1.4.1.7745.5.4.1.2.1.1 |
trunkIsdnNameGet this parameter to read trunk name.
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.2.1.2 |
trunkIsdnTypeGet this parameter to read trunk type.
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.2.1.3 |
trunkIsdnEnableGet this parameter to read trunk enable configuration.
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.4rw Enumeration .1.3.6.1.4.1.7745.5.4.1.2.1.4 |
trunkIsdnDescriptionGet this parameter to read trunk description.
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.5ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.2.1.5 |
trunkIsdnB1StatusGet this parameter to read trunk B1 status.
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.6ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.2.1.6 |
trunkIsdnB2StatusGet this parameter to read trunk B2 status.
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.7ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.2.1.7 |
trunkFxoTableThis is a table showing the list of configured voip FXO trunk.
OID: 1.3.6.1.4.1.7745.5.4.1.3 SEQUENCE OF TrunkFxoEntry .1.3.6.1.4.1.7745.5.4.1.3 |
trunkFxoEntryOID: 1.3.6.1.4.1.7745.5.4.1.3.1 TrunkFxoEntry .1.3.6.1.4.1.7745.5.4.1.3.1 |
trunkFxoIndexGet this parameter to read the index of the row.
OID: 1.3.6.1.4.1.7745.5.4.1.3.1.1ro INTEGER .1.3.6.1.4.1.7745.5.4.1.3.1.1 |
trunkFxoNameGet this parameter to read trunk name.
OID: 1.3.6.1.4.1.7745.5.4.1.3.1.2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.3.1.2 |
trunkFxoTypeGet this parameter to read trunk type.
OID: 1.3.6.1.4.1.7745.5.4.1.3.1.3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.3.1.3 |
trunkFxoEnableGet this parameter to read trunk enable configuration.
OID: 1.3.6.1.4.1.7745.5.4.1.3.1.4rw Enumeration .1.3.6.1.4.1.7745.5.4.1.3.1.4 |
trunkFxoDescriptionGet this parameter to read trunk description.
OID: 1.3.6.1.4.1.7745.5.4.1.3.1.5ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.3.1.5 |
trunkFxoStatusGet this parameter to read trunk status.
OID: 1.3.6.1.4.1.7745.5.4.1.3.1.6ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.1.3.1.6 |
userTerminal OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.4.2 |
usTermPotsTableThis is a table showing the list of configured voip POTS user terminal.
OID: 1.3.6.1.4.1.7745.5.4.2.1 SEQUENCE OF UsTermPotsEntry .1.3.6.1.4.1.7745.5.4.2.1 |
usTermPotsEntryOID: 1.3.6.1.4.1.7745.5.4.2.1.1 UsTermPotsEntry .1.3.6.1.4.1.7745.5.4.2.1.1 |
usTermPotsIndexGet this parameter to read the index of the row.
OID: 1.3.6.1.4.1.7745.5.4.2.1.1.1ro INTEGER .1.3.6.1.4.1.7745.5.4.2.1.1.1 |
usTermPotsEnableGet this parameter to read user terminal enable configuration.
OID: 1.3.6.1.4.1.7745.5.4.2.1.1.2rw Enumeration .1.3.6.1.4.1.7745.5.4.2.1.1.2 |
usTermPotsDescriptionGet this parameter to read user terminal description.
OID: 1.3.6.1.4.1.7745.5.4.2.1.1.3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.2.1.1.3 |
usTermPotsStatusGet this parameter to read user terminal status.
OID: 1.3.6.1.4.1.7745.5.4.2.1.1.4ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.2.1.1.4 |
usTermPotsDspSlicGet this parameter to read user terminal DSP Slic.
OID: 1.3.6.1.4.1.7745.5.4.2.1.1.5ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.2.1.1.5 |
usTermISDNTableThis is a table showing the list of configured voip ISDN user terminal.
OID: 1.3.6.1.4.1.7745.5.4.2.2 SEQUENCE OF UsTermISDNEntry .1.3.6.1.4.1.7745.5.4.2.2 |
usTermISDNEntryOID: 1.3.6.1.4.1.7745.5.4.2.2.1 UsTermISDNEntry .1.3.6.1.4.1.7745.5.4.2.2.1 |
usTermISDNIndexGet this parameter to read the index of the row.
OID: 1.3.6.1.4.1.7745.5.4.2.2.1.1ro INTEGER .1.3.6.1.4.1.7745.5.4.2.2.1.1 |
usTermISDNEnableGet this parameter to read user terminal enable configuration.
OID: 1.3.6.1.4.1.7745.5.4.2.2.1.2rw Enumeration .1.3.6.1.4.1.7745.5.4.2.2.1.2 |
usTermISDNDescriptionGet this parameter to read user terminal description.
OID: 1.3.6.1.4.1.7745.5.4.2.2.1.3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.2.2.1.3 |
usTermIsdnStatusB1Get this parameter to read user terminal B1 status.
OID: 1.3.6.1.4.1.7745.5.4.2.2.1.4ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.2.2.1.4 |
usTermIsdnStatusB2Get this parameter to read user terminal B2 status.
OID: 1.3.6.1.4.1.7745.5.4.2.2.1.5ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.2.2.1.5 |
usTermDectTableThis is a table showing the list of configured voip DECT user terminal.
OID: 1.3.6.1.4.1.7745.5.4.2.3 SEQUENCE OF UsTermDectEntry .1.3.6.1.4.1.7745.5.4.2.3 |
usTermDectEntryOID: 1.3.6.1.4.1.7745.5.4.2.3.1 UsTermDectEntry .1.3.6.1.4.1.7745.5.4.2.3.1 |
usTermDectIndexGet this parameter to read the index of the row.
OID: 1.3.6.1.4.1.7745.5.4.2.3.1.1ro INTEGER .1.3.6.1.4.1.7745.5.4.2.3.1.1 |
usTermDectEnableGet this parameter to read user terminal enable configuration.
OID: 1.3.6.1.4.1.7745.5.4.2.3.1.2rw Enumeration .1.3.6.1.4.1.7745.5.4.2.3.1.2 |
usTermDectDescriptionGet this parameter to read user terminal description.
OID: 1.3.6.1.4.1.7745.5.4.2.3.1.3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.2.3.1.3 |
usTermDectStatusGet this parameter to read user terminal status.
OID: 1.3.6.1.4.1.7745.5.4.2.3.1.4ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.2.3.1.4 |
usTermDectDspSlicGet this parameter to read user terminal DSP Slic.
OID: 1.3.6.1.4.1.7745.5.4.2.3.1.5ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.4.2.3.1.5 |
voipMaxConnectionSet this parameter to configure global voip max connections.
OID: 1.3.6.1.4.1.7745.5.4.3rw INTEGER .1.3.6.1.4.1.7745.5.4.3 |
traps OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.5 |
genericTrapThis trap is used to send generic string alarm messages to SNMP manager,
when a particular condition occurs.
OID: 1.3.6.1.4.1.7745.5.5.1 NOTIFICATION-TYPE .1.3.6.1.4.1.7745.5.5.1 |
genericErrorDescribe a generic error for generic trap.
OID: 1.3.6.1.4.1.7745.5.5.2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7745.5.5.2 |
interfaceUpThis trap is sent when a physical interface go up.
OID: 1.3.6.1.4.1.7745.5.5.3 NOTIFICATION-TYPE .1.3.6.1.4.1.7745.5.5.3 |
interfaceDownThis trap is sent when a physical interface go down.
OID: 1.3.6.1.4.1.7745.5.5.4 NOTIFICATION-TYPE .1.3.6.1.4.1.7745.5.5.4 |
trunkRegisteredThis trap is sent when a voip SIP Trunk registered.
OID: 1.3.6.1.4.1.7745.5.5.5 NOTIFICATION-TYPE .1.3.6.1.4.1.7745.5.5.5 |
trunkUnregisteredThis trap is sent when a voip SIP Trunk unregistered.
OID: 1.3.6.1.4.1.7745.5.5.6 NOTIFICATION-TYPE .1.3.6.1.4.1.7745.5.5.6 |
mgmtAccesses OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.5.7 |
mgmtUserA textual string containing user name.
OID: 1.3.6.1.4.1.7745.5.5.7.1ro DisplayString .1.3.6.1.4.1.7745.5.5.7.1 |
mgmtPrivilegeA textual string containing user privilege.
OID: 1.3.6.1.4.1.7745.5.5.7.2ro DisplayString .1.3.6.1.4.1.7745.5.5.7.2 |
mgmtTimeA textual string containing time and date of event.
OID: 1.3.6.1.4.1.7745.5.5.7.3ro DisplayString .1.3.6.1.4.1.7745.5.5.7.3 |
mgmtTypeA textual string containing user access type.
OID: 1.3.6.1.4.1.7745.5.5.7.4ro Enumeration .1.3.6.1.4.1.7745.5.5.7.4 |
mgmtAddressA textual string containing ip for remote access type.
OID: 1.3.6.1.4.1.7745.5.5.7.5ro DisplayString .1.3.6.1.4.1.7745.5.5.7.5 |
mgmtLoginThis trap is sent when a user login in the system console.
OID: 1.3.6.1.4.1.7745.5.5.7.6 NOTIFICATION-TYPE .1.3.6.1.4.1.7745.5.5.7.6 |
mgmtLogoutThis trap is sent when a user logout from the system console.
OID: 1.3.6.1.4.1.7745.5.5.7.7 NOTIFICATION-TYPE .1.3.6.1.4.1.7745.5.5.7.7 |
mgmtChangeThis trap is sent when a logged user change param in the system console.
OID: 1.3.6.1.4.1.7745.5.5.7.8 NOTIFICATION-TYPE .1.3.6.1.4.1.7745.5.5.7.8 |
ifc OBJECT IDENTIFIER .1.3.6.1.4.1.7745.5.6 |
ifcTableThis is a table showing the list of interface entries.
The number of entries is given by the value of mib-2 ifNumber.
The indexes for the rows are equivalent to mib-2 ifIndex.
OID: 1.3.6.1.4.1.7745.5.6.1 SEQUENCE OF IfcEntry .1.3.6.1.4.1.7745.5.6.1 |
ifcEntryOID: 1.3.6.1.4.1.7745.5.6.1.1 IfcEntry .1.3.6.1.4.1.7745.5.6.1.1 |
ifcNameGet this parameter to read interface name.
OID: 1.3.6.1.4.1.7745.5.6.1.1.1ro DisplayString .1.3.6.1.4.1.7745.5.6.1.1.1 |
ifcDescrGet this parameter to read interface description.
OID: 1.3.6.1.4.1.7745.5.6.1.1.2ro DisplayString .1.3.6.1.4.1.7745.5.6.1.1.2 |
ifcTypeGet this parameter to read interface type.
The types refer to those assigned by the Internet Assigned Numbers Authority (IANA).
OID: 1.3.6.1.4.1.7745.5.6.1.1.3ro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.7745.5.6.1.1.3 |
ifcPhysAddressGet this parameter to read interface physical address (mac address).
OID: 1.3.6.1.4.1.7745.5.6.1.1.4ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.7745.5.6.1.1.4 |
ifcMtuGet this parameter to read interface MTU,
the size of the largest datagram which can be sent/received on the interface,
specified in octets.
OID: 1.3.6.1.4.1.7745.5.6.1.1.5ro INTEGER .1.3.6.1.4.1.7745.5.6.1.1.5 |
ifcSpeedGet this parameter to read interface speed,
an estimate of the interface's current bandwidth in bits per second.
OID: 1.3.6.1.4.1.7745.5.6.1.1.6ro Gauge .1.3.6.1.4.1.7745.5.6.1.1.6 |
ifcRxRateGet this parameter to read the current and effective RX rate in bit per second.
OID: 1.3.6.1.4.1.7745.5.6.1.1.7ro Counter .1.3.6.1.4.1.7745.5.6.1.1.7 |
ifcTxRateGet this parameter to read the current and effective TX rate in bit per second.
OID: 1.3.6.1.4.1.7745.5.6.1.1.8ro Counter .1.3.6.1.4.1.7745.5.6.1.1.8 |