SAF-INTEGRAX-MIB
AI MIB Summary
The SAF-INTEGRAX-MIB module enables SNMP-based monitoring and management of Integra-X security appliances, specifically exposing operational metrics such as session states, throughput counters, interface statistics, and system health indicators for the SAF (Secure Application Framework) architecture.
SAF Integra-X device management base
Main OID:
integraX.1.3.6.1.4.1.7571.100.1.1.7.10
252
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
252 total| Object Name |
|---|
integraXSAF Integra-X device management base MODULE-IDENTITY .1.3.6.1.4.1.7571.100.1.1.7.10 |
integraXtimestampLast data update timero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.1 |
integraXradio OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.2 |
integraXradioA OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.2.1 |
integraXradioAtxPowerOutput power of radio transmitterro Integer32 UNITS "dBm" .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.1 |
integraXradioAtxFrequencyFrequency of radio transmitterro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.2 |
integraXradioArxLevelLevel of the received signalro Integer32 UNITS "dBm" .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.3 |
integraXradioArxLevelStateReceived signal level statero Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.4 |
integraXradioAsideRadio side: Low/Highro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.5 |
integraXradioAtxMuteStatus of 'Tx mute'
1 - Tx is muted,
2 - Tx is not muted.
3 - Status information unavailablero Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.6 |
integraXradioAtxMuteDurationTime remaning for Tx to be muted in seconds.
To turn mute on send number of seconds between 10 and MAX.
To turn mute off send 0.
GET will retrieve remaining duration for mute or
0 if Tx mute is turned off.ro Integer32 .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.7 |
integraXradioAduplexShiftUtilized duplex shift in kHzro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.8 |
integraXradioArxFrequencyFrequency of radio receiverro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.9 |
integraXradioAtemperatureRadio module temperaturero FixedDiv10 UNITS "C" .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.10 |
integraXradioApllPLL state of local-oscillator generatorro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.11 |
integraXradioArangesTableNetwork interface port status data. SEQUENCE OF IntegraXradioArangeEntry .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12 |
integraXradioArangeEntryAn entry containing network physical port status info. IntegraXradioArangeEntry .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1 |
integraXradioArangeEntryIndexA unique value, greater than zero, for each range
entry. Starts with 1 and is equal to a number of all range
parameters.ro Integer32 .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.1 |
integraXradioArangeDescr'Minimal' and 'maximal' labelsro DisplayString .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.2 |
integraXradioArangeTxPowerOutput power ranges for radio transmitterro Integer32 UNITS "dBm" .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.3 |
integraXradioArangeTxFrequencyFrequency ranges for radio transmitterro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.4 |
integraXradioB OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.2.2 |
integraXradioBtxPowerOutput power of radio transmitterro Integer32 UNITS "dBm" .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.1 |
integraXradioBtxFrequencyFrequency of radio transmitterro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.2 |
integraXradioBrxLevelLevel of the received signalro Integer32 UNITS "dBm" .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.3 |
integraXradioBrxLevelStateReceived signal level statero Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.4 |
integraXradioBsideRadio side: Low/Highro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.5 |
integraXradioBtxMuteStatus of 'Tx mute'
1 - Tx is muted,
2 - Tx is not muted.
3 - Status information unavailablero Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.6 |
integraXradioBtxMuteDurationTime remaning for Tx to be muted in seconds.
To turn mute on send number of seconds between 10 and MAX.
To turn mute off send 0.
GET will retrieve remaining duration for mute or
0 if Tx mute is turned off.ro Integer32 .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.7 |
integraXradioBduplexShiftUtilized duplex shift in kHzro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.8 |
integraXradioBrxFrequencyFrequency of radio receiverro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.9 |
integraXradioBtemperatureRadio module temperaturero FixedDiv10 UNITS "C" .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.10 |
integraXradioBpllPLL state of local-oscillator generatorro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.11 |
integraXradioBrangesTableNetwork interface port status data. SEQUENCE OF IntegraXradioBrangeEntry .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12 |
integraXradioBrangeEntryAn entry containing network physical port status info. IntegraXradioBrangeEntry .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1 |
integraXradioBrangeEntryIndexA unique value, greater than zero, for each range
entry. Starts with 1 and is equal to a number of all range
parameters.ro Integer32 .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.1 |
integraXradioBrangeDescr'Minimal' and 'maximal' labelsro DisplayString .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.2 |
integraXradioBrangeTxPowerOutput power ranges for radio transmitterro Integer32 UNITS "dBm" .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.3 |
integraXradioBrangeTxFrequencyFrequency ranges for radio transmitterro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.4 |
integraXmodem OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.3 |
integraXmodemA OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.3.1 |
integraXmodemAacquireStatusThis is the current status of modem data acquire
when queried modem status.
For detailed info use modemAcquireLastStatusDetails.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.1 |
integraXmodemAnormalizedMseCurrent normalized MSE value (floating point value multiplied by 10)ro Integer32 UNITS "dB" .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.2 |
integraXmodemAfecLoadDecoder stress or FEC load value (floating point in textual representation)ro Unknown .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.3 |
integraXmodemAxpdEstXPD Estimated value (floating point value multiplied by 10)ro Integer32 UNITS "dB" .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.4 |
integraXmodemAacquireLastStatusDetailsThis is the last status of successfull or unsuccessful modem data acquirero Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.5 |
integraXmodemAtemperatureModem DSP temperaturero FixedDiv10 UNITS "C" .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.6 |
integraXmodemArxModulationCurrent (actual) Rx Modulationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.7 |
integraXmodemAtxModulationCurrent (actual) Tx Modulationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.8 |
integraXmodemArxCapacityRx ethernet capacity in kilobits per secondro Integer32 UNITS "kb/s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.9 |
integraXmodemAtxCapacityTx ethernet capacity in kilobits per secondro Integer32 UNITS "kb/s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.10 |
integraXmodemAacmEngineACM engine statusro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.11 |
integraXmodemAcarrierOffsetModem carrier offsetro Integer32 UNITS "Hz" .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.12 |
integraXmodemAcountTimeModem performance count timero Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.13 |
integraXmodemAerroredBlockModem performance errored blocksro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.14 |
integraXmodemAerroredSecondModem performance errored secondsro Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.15 |
integraXmodemAseverelyErroredSecondModem performance severely errored secondsro Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.16 |
integraXmodemAbackgroundBlockErrorModem performance background block errorsro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.17 |
integraXmodemAtotalBlockNumberModem performance total block numberro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.18 |
integraXmodemAerroredSecondRatioModem performance errored second ratioro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.19 |
integraXmodemAseverelyErroredSecondRatioModem performance severely errored second ratioro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.20 |
integraXmodemAbackgroundBlockErrorRatioModem performance background block error ratioro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.21 |
integraXmodemAuptimeModem performance : uptimero Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.22 |
integraXmodemAunavailtimeModem performance : unavailtimero Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.23 |
integraXmodemAfecLdpcBlockCounterModem FEC load block counterro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.24 |
integraXmodemAfecLdpcUncorrectedBlockCounterModem FEC load uncorrected block counterro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.25 |
integraXmodemAfecLdpcUncorrectedPercentModem FEC load uncorrected percentro Integer32 UNITS "%" .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.26 |
integraXmodemAfecRsBlockCounterModem FEC load RS block counterro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.27 |
integraXmodemAfecRsUncorrectedBlockCounterModem FEC load RS uncorrected block counterro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.28 |
integraXmodemAmodulationACMminMinimal modulation for ACM enabled profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.29 |
integraXmodemAmodulationACMmaxMaximal modulation for ACM enabled profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.1.30 |
integraXmodemB OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.3.2 |
integraXmodemBacquireStatusThis is the current status of modem data acquire
when queried modem status.
For detailed info use modemAcquireLastStatusDetails.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.1 |
integraXmodemBnormalizedMseCurrent normalized MSE value (floating point value multiplied by 10)ro Integer32 UNITS "dB" .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.2 |
integraXmodemBfecLoadDecoder stress or FEC load value (floating point in textual representation)ro Unknown .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.3 |
integraXmodemBxpdEstXPD Estimated value (floating point value multiplied by 10)ro Integer32 UNITS "dB" .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.4 |
integraXmodemBacquireLastStatusDetailsThis is the last status of successfull or unsuccessful modem data acquirero Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.5 |
integraXmodemBtemperatureModem DSP temperaturero FixedDiv10 UNITS "C" .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.6 |
integraXmodemBrxModulationCurrent (actual) Rx Modulationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.7 |
integraXmodemBtxModulationCurrent (actual) Tx Modulationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.8 |
integraXmodemBrxCapacityRx ethernet capacity in kilobits per secondro Integer32 UNITS "kb/s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.9 |
integraXmodemBtxCapacityTx ethernet capacity in kilobits per secondro Integer32 UNITS "kb/s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.10 |
integraXmodemBacmEngineACM engine statusro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.11 |
integraXmodemBcarrierOffsetModem carrier offsetro Integer32 UNITS "Hz" .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.12 |
integraXmodemBcountTimeModem performance count timero Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.13 |
integraXmodemBerroredBlockModem performance errored blocksro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.14 |
integraXmodemBerroredSecondModem performance errored secondsro Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.15 |
integraXmodemBseverelyErroredSecondModem performance severely errored secondsro Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.16 |
integraXmodemBbackgroundBlockErrorModem performance background block errorsro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.17 |
integraXmodemBtotalBlockNumberModem performance total block numberro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.18 |
integraXmodemBerroredSecondRatioModem performance errored second ratioro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.19 |
integraXmodemBseverelyErroredSecondRatioModem performance severely errored second ratioro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.20 |
integraXmodemBbackgroundBlockErrorRatioModem performance background block error ratioro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.21 |
integraXmodemBuptimeModem performance : uptimero Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.22 |
integraXmodemBunavailtimeModem performance : unavailtimero Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.23 |
integraXmodemBfecLdpcBlockCounterModem FEC load block counterro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.24 |
integraXmodemBfecLdpcUncorrectedBlockCounterModem FEC load uncorrected block counterro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.25 |
integraXmodemBfecLdpcUncorrectedPercentModem FEC load uncorrected percentro Integer32 UNITS "%" .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.26 |
integraXmodemBfecRsBlockCounterModem FEC load RS block counterro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.27 |
integraXmodemBfecRsUncorrectedBlockCounterModem FEC load RS uncorrected block counterro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.28 |
integraXmodemBmodulationACMminMinimal modulation for ACM enabled profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.29 |
integraXmodemBmodulationACMmaxMaximal modulation for ACM enabled profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.2.30 |
integraXmodemBandwidthSignal bandwidthro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.10.3.3 |
integraXmodemModulationModulation (preferred)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.3.4 |
integraXsystem OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.4 |
integraXsysCPUtemperatureSystem CPU temperaturero FixedDiv10 UNITS "C" .1.3.6.1.4.1.7571.100.1.1.7.10.4.2 |
integraXsysLicenseExpireLicense expires after number of seconds.
In the case of -1, check licenseGenStatus statusro Gauge32 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.10.4.3 |
integraXsysLicenseGenStatusLicense General status.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.4.4 |
integraXsysPSUvoltagePower voltage in mVro Integer32 UNITS "mV" .1.3.6.1.4.1.7571.100.1.1.7.10.4.5 |
integraXsysPSUcurrentPower current in mAro Integer32 UNITS "mA" .1.3.6.1.4.1.7571.100.1.1.7.10.4.6 |
integraXsysPSUpowerPower consumption in mWro Integer32 UNITS "mW" .1.3.6.1.4.1.7571.100.1.1.7.10.4.7 |
integraXsysBoardTemperatureSystem temperaturero FixedDiv10 UNITS "C" .1.3.6.1.4.1.7571.100.1.1.7.10.4.8 |
integraXsysFreeMemorySystem free memoryro FixedDiv10 UNITS "%" .1.3.6.1.4.1.7571.100.1.1.7.10.4.9 |
integraXsysCPUidleSystem CPU idlero FixedDiv10 UNITS "%" .1.3.6.1.4.1.7571.100.1.1.7.10.4.10 |
integraXsysDeviceTypeDevice type namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.4.11 |
integraXsysDeviceSerialDevice serial numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.4.12 |
integraXsysDeviceProductModelDevice product model codero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.4.13 |
integraXsysFanErrorDevice fan 1 and fan 2 error statusro Bits .1.3.6.1.4.1.7571.100.1.1.7.10.4.14 |
integraXsysSw1v0coreSW_1V0_COREro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.15 |
integraXsysSw1v0avddSW_1V0_AVDDro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.16 |
integraXsysSw1v2aSW_1V2Aro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.17 |
integraXsysSw1v5ddrSW_1V5_DDRro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.18 |
integraXsysSw1v8SW_1V8ro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.19 |
integraXsysSw2v5SW_2V5ro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.20 |
integraXsysSw3v3SW_3V3ro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.21 |
integraXsysVttrefPsVTTVREF_PSro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.22 |
integraXsysVttddrPsVTTDDR_PSro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.23 |
integraXsysZq1v0ZQ_1V0ro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.24 |
integraXsysZq1v5ZQ_1V5ro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.25 |
integraXsysZq1v8ZQ_1V8ro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.26 |
integraXsysZq2v5ZQ_2V5ro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.27 |
integraXsysZq3v3ZQ_3V3ro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.28 |
integraXsys5v0d5V0Dro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.29 |
integraXsysSw1v2SW_1V2ro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.30 |
integraXsysMdmVddcAvsMDM_VDDC_AVSro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.31 |
integraXsysMdm3v3MDM_3V3ro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.32 |
integraXsysMdm1v0aPmMDM_1V0A_PMro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.33 |
integraXsysMdm1v0aMDM_1V0Aro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.34 |
integraXsysMdm1v8aMDM_1V8Aro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.35 |
integraXsysMdmDAC02v5aMDM_DAC0_2V5Aro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.36 |
integraXsysMdmDAC12v5MDM_DAC1_2V5Aro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.37 |
integraXsysMdmDAC22v5MDM_DAC2_2V5Aro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.38 |
integraXsysMdm1v8ioMDM_1V8_IOro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.39 |
integraXsysMdm3v3ioMDM_3V3_IOro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.40 |
integraXsys3v3Radio3V3_RADIOro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.41 |
integraXsysMdm4v0MDM_4V0ro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.42 |
integraXsys5v0nRadio5V0N_RADIOro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.43 |
integraXsysCoreVddSnsCORE_VDD_SNSro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.44 |
integraXsys40v0RadioSns40V0_RADIO_SNSro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.10.4.45 |
integraXsysServices OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.4.46 |
integraXsysServicesRebootThis object can only be set to 1.
It initiates system reboot immediately.rw Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.4.46.1 |
integraXsysServicesFtpSwitchStatus and on/off switch for the FTP serverrw Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.4.46.2 |
integraXsysServicesFwCurrInfoCurrently running FW info.
Same output as in RFC1213-MIB::sysDescr.ro DisplayString .1.3.6.1.4.1.7571.100.1.1.7.10.4.46.3 |
integraXsysServicesFwAvailViewList FW available for installation (uploaded).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.4.46.4 |
integraXsysServicesFwRemoveRemove available (uploaded) FW version.
View FW versions in integraXsysServicesFwAvailView.
Send number corresponding to info in integraXsysServicesFwAvailView.rw Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.4.46.5 |
integraXsysServicesFwRemoveAllRemove all available (uploaded) FW versions.rw Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.4.46.6 |
integraXsysServicesFwUploadUpload FW (make available for installation).
You need to upload a firmware to FTP ftp://anonymous@DEVICE_IP:/firmware/ first!
You must have only 1 firmware in firmware folder for this option to work!
This option only starts upload on the device and doesn't return success status for it.
Usually you should wait some time while the device completes upload.
SNMP won't response to quieries while upload is in progress.
You may check integraXsysServicesFwAvailView to see if your FW is ready for install.rw Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.4.46.7 |
integraXsysServicesFwInstInstall FW version.
You need check integraXsysServicesFwAvailView to see FW versions ready for install.
This option only starts installation on the device and doesn't return success status for it.
Usually you should wait some time while the device completes installation.
SNMP won't response to quieries while upload is in progress.
If FW installation was successful, integraXsysServicesFwSwitchNext will show
different FW bank value for the next boot.rw Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.4.46.8 |
integraXsysServicesFwSwitchRunningFW running bank info.
Use integraXsysServicesFwSwitchNext to view and switch FW bank for the next boot.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.4.46.9 |
integraXsysServicesFwSwitchNextFW next boot bank info. Set request can change FW bank for the next boot.
View running FW bank number in integraXsysServicesFwSwitchRunning.rw Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.4.46.10 |
integraXethernet OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.5 |
integraXifStatusTableNetwork interface port status data. SEQUENCE OF IntegraXifPortEntry .1.3.6.1.4.1.7571.100.1.1.7.10.5.1 |
integraXifPortEntryAn entry containing network physical port status info. IntegraXifPortEntry .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1 |
integraXifPortStatIndexA unique value, greater than zero, for each physical
network interface. It is recommended that
values are assigned contiguously starting from 1.ro Integer32 .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.1 |
integraXifPortStatDescrPhysical network interface description.
LAN1 is electrical, LAN2 and LAN3 are SFP
and WAN is radio port.ro DisplayString .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.2 |
integraXifPortTypeThe type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.ro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.3 |
integraXifPortMtuMaximum transmission unit value in bytes.ro Integer32 UNITS "B" .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.4 |
integraXifPortHighSpeedLink speed in 1 000 000 * bits per second.ro Gauge32 UNITS "Mbps" .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.5 |
integraXifPortPhysAddressThe interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.6 |
integraXifPortAdminStatusDesired state of network interfaces. Interfaces
can be enabled(1), disabled(2), unknown(3) (no info received).ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.7 |
integraXifPortOperStatusActual state of interfaces. Link can be up(1),
down(2) or in unknown(3) state.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.8 |
integraXifPortLastChangeThis parameter value is always 0 at the moment.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.9 |
integraXifPortAutonegAuto-negotiation status. Unknown means no info was received.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.10 |
integraXifPortDuplexDuplex status for the interface.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.11 |
integraXifPortSyncEthActiveSynchronous Ethernet status.
Can be active(1) or inactive(0).ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.12 |
integraXifPortSyncEthPrioSynchronous Ethernet priority.ro Integer32 .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.13 |
integraXifPortFlowControlFlow control status.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.14 |
integraXifStatisticsTableNetwork interface port statistics data. SEQUENCE OF IntegraXifPortStcEntry .1.3.6.1.4.1.7571.100.1.1.7.10.5.2 |
integraXifPortStcEntryAn entry containing network physical port statistics counter data. IntegraXifPortStcEntry .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1 |
integraXifPortStcIndexA unique value, greater than zero, for each physical
network interface. It is recommended that
values are assigned contiguously starting from 1.ro Integer32 .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.1 |
integraXifPortStcDescrPhysical network interface description.
LAN1 is electrical, LAN2 and LAN3 are SFP,
WAN is radio port and MNG is internal management interface.ro DisplayString .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.2 |
integraXifTimePassedStatistics collection time.ro TimeTicks UNITS "s/100" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.3 |
integraXifIngressPacketsPackets that ingress on the port.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.4 |
integraXifIngressBytesBytes that ingress on the port.ro Counter64 UNITS "B" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.5 |
integraXifEgressPacketsPackets that egress on the port.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.6 |
integraXifEgressBytesBytes that egress on the port.ro Counter64 UNITS "B" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.7 |
integraXifEtherStatsMulticastPktsThe total number of good packets (both received and
transmitted) that were directed to a multicast address.
Note that this number does not include packets directed
to the broadcast address.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.8 |
integraXifEtherStatsBroadcastPktsThe total number of good packets (both received and
transmitted) that were directed to the broadcast address.
Note that this does not include multicast packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.9 |
integraXifEtherStatsPkts64OctetsThe total number of packets (including bad
packets) (both received and transmitted)
that were 64 octets in length
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.10 |
integraXifEtherStatsPkts65to127OctetsThe total number of packets (including bad
packets) (both received and transmitted)
that were between 65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.11 |
integraXifEtherStatsPkts128to255OctetsThe total number of packets (including bad
packets) (both received and transmitted) that were
between 128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.12 |
integraXifEtherStatsPkts256to511OctetsThe total number of packets (including bad
packets) (both received and transmitted) that were
between 256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.13 |
integraXifEtherStatsPkts512to1023OctetsThe total number of packets (including bad
packets) (both received and transmitted) that were
between 512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.14 |
integraXifEtherStatsPkts1024to1518OctetsThe total number of packets (including bad
packets) (both received and transmitted) that were
between 1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.15 |
integraXifEtherStatsOversizePktsThe number of packets (both received and
transmitted) that were longer than 1518
octets (excluding framing bits but including
FCS octets) but were otherwise well formed.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.16 |
integraXifEtherRxOversizePktsThe number of packets received
that were longer than 1518 octets
(excluding framing bits but including
FCS octets) but were otherwise well formed.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.17 |
integraXifEtherTxOversizePktsThe number of packets transmitted
that were longer than 1518 octets
(excluding framing bits but including
FCS octets) but were otherwise well formed.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.18 |
integraXifEtherStatsOctetsTotal number of octets of data (including
those in bad packets) both received and
transmitted.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.19 |
integraXifEtherStatsPktsTotal number of packets (including bad packets)
both received and transmitted.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.20 |
integraXifEtherStatsTXNoErrorsNumber of packets that were transmitted
without errors.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.21 |
integraXifEtherStatsRXNoErrorsNumber of packets that were received
without errors.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.22 |
integraXifEtherStatsPkts1519to1522OctetsThe total number of packets (including bad
packets) (both received and transmitted) that were
between 1519 and 1522 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.23 |
integraXifIfInOctetsTotal number of octets of data (including
those in bad packets) that were received.ro Counter64 UNITS "octet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.24 |
integraXifIfOutOctetsTotal number of octets of data (including
those in bad packets) that were transmitted.ro Counter64 UNITS "octet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.25 |
integraXifDot1dTpPortInFramesThe number of frames that have been received by
this port from its segment.ro Counter64 UNITS "frame" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.26 |
integraXifDot1dTpPortOutFramesThe number of frames that have been transmitted by
this port to its segment.ro Counter64 UNITS "frame" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.27 |
integraXifReceivedPkts64OctetsTotal number of received packets that were
64 octets in length (excluding framing bits
but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.28 |
integraXifTransmittedPkts64OctetsTotal number of transmitted packets that were
64 octets in length (excluding framing bits
but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.29 |
integraXifReceivedPkts65to127OctetsTotal number of received packets that were
between 65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.30 |
integraXifTransmittedPkts65to127OctetsTotal number of transmitted packets that were
between 65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.31 |
integraXifReceivedPkts128to255OctetsTotal number of received packets that were
between 128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.32 |
integraXifTransmittedPkts128to255OctetsTotal number of transmitted packets that were
between 128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.33 |
integraXifReceivedPkts256to511OctetsTotal number of received packets that were
between 256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.34 |
integraXifTransmittedPkts256to511OctetsTotal number of transmitted packets that were
between 256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.35 |
integraXifReceivedPkts512to1023OctetsTotal number of received packets that were
between 512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.36 |
integraXifTransmittedPkts512to1023OctetsTotal number of transmitted packets that were
between 512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.37 |
integraXifReceivedPkts1024to1518OctetsTotal number of received packets that were
between 1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.38 |
integraXifTransmittedPkts1024to1518OctetsTotal number of transmitted packets that were
between 1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.39 |
integraXifIfInBroadcastPktsThe total number of received good packets
that were directed to the broadcast address.
Note that this does not include multicast packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.40 |
integraXifIfOutBroadcastPktsThe total number of transmitted good packets
that were directed to the broadcast address.
Note that this does not include multicast packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.41 |
integraXifIfInMulticastPktsThe total number of received good packets
that were directed to a multicast address.
Note that this number does not include broadcast packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.42 |
integraXifIfOutMulticastPktsThe total number of transmitted good packets
that were directed to a multicast address.
Note that this number does not include broadcast packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.43 |
integraXifDot3InPauseFramesA count of MAC Control frames received on this
interface with an opcode indicating the PAUSE
operation.
This counter does not increment when the
interface is operating in half-duplex mode.ro Counter64 UNITS "frame" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.44 |
integraXifDot3OutPauseFramesA count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.ro Counter64 UNITS "frame" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.45 |
integraXifEtherStatsUndersizePktsThe total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.46 |
integraXifEtherStatsFragmentsThe total number of packets received that were less than
64 octets in length (excluding framing bits but including
FCS octets) and had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a
bad FCS with a non-integral number of octets (Alignment
Error).
Note that it is entirely normal for etherStatsFragments to
increment. This is because it counts both runts (which are
normal occurrences due to collisions) and noise hits.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.47 |
integraXifEtherStatsCRCAlignErrorsThe total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.48 |
integraXifEtherStatsJabbersThe total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.49 |
integraXifIngressBPSIngoing data transfer rate in bytes per second.ro Integer32 UNITS "Bps" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.50 |
integraXifIngressPPSIngoing data transfer rate in packets per second.ro Integer32 UNITS "pps" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.51 |
integraXifEgressBPSOutgoing data transfer rate in bytes per second.ro Integer32 UNITS "Bps" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.52 |
integraXifEgressPPSOutgoing data transfer rate in packets per second.ro Integer32 UNITS "pps" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.53 |
integraXifAllCoSQoutPacketsAll CoSQ outgoing packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.54 |
integraXifAllCoSQoutBytesAll CoSQ outgoing bytes.ro Counter64 UNITS "B" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.55 |
integraXifAllCoSQdroppedPacketsAll CoSQ dropped packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.56 |
integraXifAllCoSQdroppedBytesAll CoSQ dropped bytes.ro Counter64 UNITS "B" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.57 |
integraXifProcessedRxPacketsProcessed received packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.58 |
integraXifProcessedRxBytesProcessed received bytes.ro Counter64 UNITS "B" .1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.59 |
integraXifLspPortAdminStateLSP port status.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.5.3 |
integraXifLspPortListLSP port status.ro Bits .1.3.6.1.4.1.7571.100.1.1.7.10.5.4 |
integraXifLspPortStatusLSP port status.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.5.5 |
integraXexecuteConfigThis object can only be set to 1.
It initiates new running configuration
applying using values, that have been set before.
Setting it when no new changes are available
will do nothing and return an error.
GET will return 0 if there were no errors,
while executing configuration or will return
a bitmask, that shows which SET requests have failed.
Those failed requests will be shown bit wise
from LSB as follows:
BIT0 radioTxMuteDuration
BIT1 radioTxFrequency
BIT2 radioTxPowerrw Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.6 |
integraXneedStoreThis object shows if there is unsaved,
but executed (running) configuration.
Unsaved changes will be lost after
device reboot. Unsaved entities are shown
bit wise, starting from LSB as follows:
BIT0 Aggregation
BIT1 Event log
BIT2 Modem
BIT3 Network
BIT4 Performance
BIT5 Radio
BIT6 SNMP
BIT7 Synchronous Ethernet
BIT8 Systemro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.7 |
integraXstoreConfigThis object can only be set to 1.
It initiates saving of running configuration.
It will only work if there are unsaved,
but executed (running) changes (configuration).
Setting it when no new running configuration
is available will do nothing and return an error.rw Enumeration .1.3.6.1.4.1.7571.100.1.1.7.10.8 |
integraXnetCfg OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.9 |
integraXnetCfgIPaddressLocal IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.9.1 |
integraXnetCfgIPmaskLocal IP maskrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.9.2 |
integraXnetCfgIPgatewayIP gateway
Send '0' or '255.255.255.255' to clear.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.9.3 |
integraXnetCfgRemoteIPaddressRemote IP addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.10.9.4 |
integraXConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.10 |
integraXCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.10.1 |
integraXGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.10.10.2 |