SAF-INTEGRAE-MIB
AI MIB Summary
The SAF-INTEGRAE-MIB provides SNMP-based management and monitoring capabilities for SAF Integra-E network devices, exposing operational status, interface statistics, and system health metrics required for infrastructure oversight.
SAF Integra-E device management base
Main OID:
integraE.1.3.6.1.4.1.7571.100.1.1.7.9
182
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
182 total| Object Name |
|---|
integraESAF Integra-E device management base MODULE-IDENTITY .1.3.6.1.4.1.7571.100.1.1.7.9 |
integraEtimestampLast data update timero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.1 |
integraEradio OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.9.2 |
integraEradioTxPowerOutput power of radio transmitterrw Integer32 UNITS "dBm" .1.3.6.1.4.1.7571.100.1.1.7.9.2.1 |
integraEradioTxFrequencyFrequency of radio transmitterrw Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.9.2.2 |
integraEradioRxLevelLevel of the received signalro Integer32 UNITS "dBm" .1.3.6.1.4.1.7571.100.1.1.7.9.2.3 |
integraEradioSideRadio side: Low/Highro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.2.4 |
integraEradioTxMuteStatus of 'Tx mute'
1 - Tx is muted,
2 - Tx is not muted.
3 - Status information unavailablero Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.2.5 |
integraEradioDuplexShiftUtilized duplex shift in kHzro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.9.2.6 |
integraEradioRxFrequencyFrequency of radio receiverro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.9.2.7 |
integraEradioTemperatureRadio module temperaturero FixedDiv10 UNITS "C" .1.3.6.1.4.1.7571.100.1.1.7.9.2.8 |
integraEradioTxMuteDurationTime remaning for Tx to be muted in seconds.
To turn mute on send number of seconds between 10 and MAX.
To turn mute off send 0.
GET will retrieve remaining duration for mute or
0 if Tx mute is turned off.rw Integer32 .1.3.6.1.4.1.7571.100.1.1.7.9.2.9 |
integraEradioRangesTableNetwork interface port status data. SEQUENCE OF IntegraEradioRangeEntry .1.3.6.1.4.1.7571.100.1.1.7.9.2.10 |
integraEradioRangeEntryAn entry containing network physical port status info. IntegraEradioRangeEntry .1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1 |
integraEradioRangeEntryIndexA unique value, greater than zero, for each range
entry. Starts with 1 and is equal to a number of all range
parameters.ro Integer32 .1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.1 |
integraEradioRangeDescr'Minimal' and 'maximal' labelsro DisplayString .1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.2 |
integraEradioRangeTxPowerOutput power ranges for radio transmitterro Integer32 UNITS "dBm" .1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.3 |
integraEradioRangeTxFrequencyFrequency ranges for radio transmitterro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.4 |
integraEradioPLLPLL state of local-oscillator generatorro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.2.11 |
integraEradioRxLevelStateReceived signal level statero Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.2.12 |
integraEradioAtpcStateATPC statero Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.2.13 |
integraEradioAtpcUpdatePeriodATPC update periodro Integer32 .1.3.6.1.4.1.7571.100.1.1.7.9.2.14 |
integraEradioAtpcRxLevelMinATPC Minimal level of the received signalro Integer32 UNITS "dBm" .1.3.6.1.4.1.7571.100.1.1.7.9.2.15 |
integraEradioAtpcRxLevelMaxATPC Maximal level of the received signalro Integer32 UNITS "dBm" .1.3.6.1.4.1.7571.100.1.1.7.9.2.16 |
integraEmodem OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.9.3 |
integraEmodemAcquireStatusThis is the current status of modem data acquire
when queried modem status.
For detailed info use modemAcquireLastStatusDetails.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.3.1 |
integraEmodemNormalizedMseCurrent normalized MSE valuero FixedDiv10 UNITS "dB" .1.3.6.1.4.1.7571.100.1.1.7.9.3.2 |
integraEmodemFECloadDecoder stress or FEC load valuero Unknown .1.3.6.1.4.1.7571.100.1.1.7.9.3.3 |
integraEmodemFEClockedFEC locked statusro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.3.4 |
integraEmodemAcquireLastStatusDetailsThis is the last status of successfull or unsuccessful modem data acquirero Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.3.5 |
integraEmodemTemperatureModem DSP temperaturero FixedDiv10 UNITS "C" .1.3.6.1.4.1.7571.100.1.1.7.9.3.6 |
integraEmodemBandwidthSignal bandwidthro Integer32 UNITS "kHz" .1.3.6.1.4.1.7571.100.1.1.7.9.3.7 |
integraEmodemModulationModulation (preferred)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.3.8 |
integraEmodemRxModulationCurrent (actual) Rx Modulationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.3.9 |
integraEmodemTxModulationCurrent (actual) Tx Modulationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.3.10 |
integraEmodemRxCapacityRx ethernet capacity in kilobits per secondro Integer32 UNITS "kb/s" .1.3.6.1.4.1.7571.100.1.1.7.9.3.11 |
integraEmodemTxCapacityTx ethernet capacity in kilobits per secondro Integer32 UNITS "kb/s" .1.3.6.1.4.1.7571.100.1.1.7.9.3.12 |
integraEmodemACMBengineACMB engine statusro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.3.13 |
integraEmodemCarrierOffsetModem carrier offsetro Integer32 UNITS "Hz" .1.3.6.1.4.1.7571.100.1.1.7.9.3.14 |
integraEmodemCountTimeModem performance count timero Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.9.3.15 |
integraEmodemErroredBlockModem performance errored blocksro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.9.3.16 |
integraEmodemErroredSecondModem performance errored secondsro Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.9.3.17 |
integraEmodemSeverelyErroredSecondModem performance severely errored secondsro Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.9.3.18 |
integraEmodemBackgroundBlockErrorModem performance background block errorsro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.9.3.19 |
integraEmodemTotalBlockNumberModem performance total block numberro Counter64 .1.3.6.1.4.1.7571.100.1.1.7.9.3.20 |
integraEmodemErroredSecondRatioModem performance errored second ratioro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.3.21 |
integraEmodemSeverelyErroredSecondRatioModem performance severely errored second ratioro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.3.22 |
integraEmodemBackgroundBlockErrorRatioModem performance background block error ratioro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.3.23 |
integraEmodemUptimeModem performance : uptimero Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.9.3.24 |
integraEmodemUnavailtimeModem performance : unavailtimero Counter64 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.9.3.25 |
integraEmodemModulationACMBminMinimal modulation for ACMB enabled profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.3.26 |
integraEmodemModulationACMBmaxMaximal modulation for ACMB enabled profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.3.27 |
integraEsystem OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.9.4 |
integraEsysCPUtemperatureSystem CPU temperaturero FixedDiv10 UNITS "C" .1.3.6.1.4.1.7571.100.1.1.7.9.4.2 |
integraEsysLicenseExpireLicense expires after number of seconds.
In the case of -1, check licenseGenStatus statusro Gauge32 UNITS "s" .1.3.6.1.4.1.7571.100.1.1.7.9.4.3 |
integraEsysLicenseGenStatusLicense General status.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.4.4 |
integraEsysPSUvoltagePower voltage in mVro Integer32 UNITS "mV" .1.3.6.1.4.1.7571.100.1.1.7.9.4.5 |
integraEsysPSUcurrentPower current in mAro Integer32 UNITS "mA" .1.3.6.1.4.1.7571.100.1.1.7.9.4.6 |
integraEsysPSUpowerPower consumption in mWro Integer32 UNITS "mW" .1.3.6.1.4.1.7571.100.1.1.7.9.4.7 |
integraEsysBoardTemperatureSystem temperaturero FixedDiv10 UNITS "C" .1.3.6.1.4.1.7571.100.1.1.7.9.4.8 |
integraEsysFreeMemorySystem free memoryro FixedDiv10 UNITS "%" .1.3.6.1.4.1.7571.100.1.1.7.9.4.9 |
integraEsysCPUidleSystem CPU idlero FixedDiv10 UNITS "%" .1.3.6.1.4.1.7571.100.1.1.7.9.4.10 |
integraEsysDeviceTypeDevice type namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.4.11 |
integraEsysDeviceSerialDevice serial numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.4.12 |
integraEsysDeviceProductModelDevice product model codero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.4.13 |
integraEsysFanErrorDevice fan 1 error statusro Bits .1.3.6.1.4.1.7571.100.1.1.7.9.4.14 |
integraEsysXADCtemperatureXADC Temperaturero FixedDiv10 UNITS "C" .1.3.6.1.4.1.7571.100.1.1.7.9.4.15 |
integraEsysVCCintVcc INTro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.16 |
integraEsysVCCauxVcc AUXro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.17 |
integraEsysVCCbramVcc BRAMro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.18 |
integraEsysVCCpintVcc PINTro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.19 |
integraEsysVCCpauxVcc PAUXro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.20 |
integraEsysVCCoddrVcc ODDRro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.21 |
integraEsysXadc6v0AvddMdmAnaXADC_6V0_AVDD_M - Modem Analogro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.22 |
integraEsysXadc1v0AvddSwAnaXADC_1V0_AVDD_S - Switch Analogro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.23 |
integraEsysXadc1v0AvddMdmAnaXADC_1V0_AVDD_M - Modem Analogro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.24 |
integraEsysXadc1v0DvddMdmDigXADC_1V0_DVDD_M - Modem Digitalro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.25 |
integraEsysXadc1v0CoreMdmDigXADC_1V0_CORE_M - Modem Digitalro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.26 |
integraEsysXadc2v5EnvAdcAvddMdmAnaXADC_2V5_ENVADC_AVDD - Modem Analogro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.27 |
integraEsysXadc1v0CoreSwDigXADC_1V0_CORE_S - Switch Digitalro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.28 |
integraEsysXadc5v0IqAvddMdmAnaXADC_5V0_IQ_AVDD - Modem Analogro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.29 |
integraEsysXadc2v5WbDacClAvddMdmAnaXADC_2V5_WBDAC_CL_AVDD - Modem Analogro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.30 |
integraEsysXadc1v2VccPhyDigXADC_1V2_VCC - PHY Digitalro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.31 |
integraEsysXadc4v6AfeDacAvddMdmAnaXADC_4V6_AFE_DAC_AVDD - Modem Analogro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.32 |
integraEsysXadc2v5WbDacAvddMdmAnaXADC_2V5_WBDAC_AVDD - Modem Analogro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.33 |
integraEsysXadc2v5VccSysDigXADC_2V5_VCC - System Digitalro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.34 |
integraEsysXadc3v3VccSysDigXADC_3V3_VCC - System Digitalro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.35 |
integraEsysXadc1v5Ddr3SwXADC_1V5_DDR3_S - Switch DDR3ro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.36 |
integraEsysXadc2v5WbAdcAvddMdmAnaXADC_2V5_WBADC_AVDD - Modem Analogro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.37 |
integraEsysXadc2v5WbDacPllAvddMdmAnaXADC_2V5_WBDAC_PLL_AVDD - Modem Analogro FixedDiv20 UNITS "V" .1.3.6.1.4.1.7571.100.1.1.7.9.4.38 |
integraEethernet OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.9.5 |
integraEifStatusTableNetwork interface port status data. SEQUENCE OF IntegraEifPortEntry .1.3.6.1.4.1.7571.100.1.1.7.9.5.1 |
integraEifPortEntryAn entry containing network physical port status info. IntegraEifPortEntry .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1 |
integraEifPortStatIndexA unique value, greater than zero, for each physical
network interface. It is recommended that
values are assigned contiguously starting from 1.ro Integer32 .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.1 |
integraEifPortStatDescrPhysical network interface description.
LAN1 is electrical, LAN2 and LAN3 are SFP
and WAN is radio port.ro DisplayString .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.2 |
integraEifPortTypeThe type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.ro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.3 |
integraEifPortMtuMaximum transmission unit value in bytes.ro Integer32 UNITS "B" .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.4 |
integraEifPortHighSpeedLink speed in 1 000 000 * bits per second.ro Gauge32 UNITS "Mbps" .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.5 |
integraEifPortPhysAddressThe interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.6 |
integraEifPortAdminStatusDesired state of network interfaces. Interfaces
can be enabled(1), disabled(2), unknown(3) (no info received).ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.7 |
integraEifPortOperStatusActual state of interfaces. Link can be up(1),
down(2) or in unknown(3) state.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.8 |
integraEifPortLastChangeThis parameter value is always 0 at the moment.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.9 |
integraEifPortAutonegAuto-negotiation status. Unknown means no info was received.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.10 |
integraEifPortDuplexDuplex status for the interface.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.11 |
integraEifPortSyncEthActiveSynchronous Ethernet status.
Can be active(1) or inactive(0).ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.12 |
integraEifPortSyncEthPrioSynchronous Ethernet priority.ro Integer32 .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.13 |
integraEifPortFlowControlFlow control status.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.14 |
integraEifStatisticsTableNetwork interface port statistics data. SEQUENCE OF IntegraEifPortStcEntry .1.3.6.1.4.1.7571.100.1.1.7.9.5.2 |
integraEifPortStcEntryAn entry containing network physical port statistics counter data. IntegraEifPortStcEntry .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1 |
integraEifPortStcIndexA unique value, greater than zero, for each physical
network interface. It is recommended that
values are assigned contiguously starting from 1.ro Integer32 .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.1 |
integraEifPortStcDescrPhysical network interface description.
LAN1 is electrical, LAN2 and LAN3 are SFP,
WAN is radio port and MNG is internal management interface.ro DisplayString .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.2 |
integraEifTimePassedStatistics collection time.ro TimeTicks UNITS "s/100" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.3 |
integraEifIngressPacketsPackets that ingress on the port.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.4 |
integraEifIngressBytesBytes that ingress on the port.ro Counter64 UNITS "B" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.5 |
integraEifEgressPacketsPackets that egress on the port.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.6 |
integraEifEgressBytesBytes that egress on the port.ro Counter64 UNITS "B" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.7 |
integraEifEtherStatsMulticastPktsThe total number of good packets (both received and
transmitted) that were directed to a multicast address.
Note that this number does not include packets directed
to the broadcast address.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.8 |
integraEifEtherStatsBroadcastPktsThe total number of good packets (both received and
transmitted) that were directed to the broadcast address.
Note that this does not include multicast packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.9 |
integraEifEtherStatsPkts64OctetsThe total number of packets (including bad
packets) (both received and transmitted)
that were 64 octets in length
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.10 |
integraEifEtherStatsPkts65to127OctetsThe total number of packets (including bad
packets) (both received and transmitted)
that were between 65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.11 |
integraEifEtherStatsPkts128to255OctetsThe total number of packets (including bad
packets) (both received and transmitted) that were
between 128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.12 |
integraEifEtherStatsPkts256to511OctetsThe total number of packets (including bad
packets) (both received and transmitted) that were
between 256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.13 |
integraEifEtherStatsPkts512to1023OctetsThe total number of packets (including bad
packets) (both received and transmitted) that were
between 512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.14 |
integraEifEtherStatsPkts1024to1518OctetsThe total number of packets (including bad
packets) (both received and transmitted) that were
between 1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.15 |
integraEifEtherStatsOversizePktsThe number of packets (both received and
transmitted) that were longer than 1518
octets (excluding framing bits but including
FCS octets) but were otherwise well formed.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.16 |
integraEifEtherRxOversizePktsThe number of packets received
that were longer than 1518 octets
(excluding framing bits but including
FCS octets) but were otherwise well formed.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.17 |
integraEifEtherTxOversizePktsThe number of packets transmitted
that were longer than 1518 octets
(excluding framing bits but including
FCS octets) but were otherwise well formed.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.18 |
integraEifEtherStatsOctetsTotal number of octets of data (including
those in bad packets) both received and
transmitted.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.19 |
integraEifEtherStatsPktsTotal number of packets (including bad packets)
both received and transmitted.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.20 |
integraEifEtherStatsTXNoErrorsNumber of packets that were transmitted
without errors.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.21 |
integraEifEtherStatsRXNoErrorsNumber of packets that were received
without errors.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.22 |
integraEifEtherStatsPkts1519to1522OctetsThe total number of packets (including bad
packets) (both received and transmitted) that were
between 1519 and 1522 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.23 |
integraEifIfInOctetsTotal number of octets of data (including
those in bad packets) that were received.ro Counter64 UNITS "octet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.24 |
integraEifIfOutOctetsTotal number of octets of data (including
those in bad packets) that were transmitted.ro Counter64 UNITS "octet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.25 |
integraEifDot1dTpPortInFramesThe number of frames that have been received by
this port from its segment.ro Counter64 UNITS "frame" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.26 |
integraEifDot1dTpPortOutFramesThe number of frames that have been transmitted by
this port to its segment.ro Counter64 UNITS "frame" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.27 |
integraEifReceivedPkts64OctetsTotal number of received packets that were
64 octets in length (excluding framing bits
but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.28 |
integraEifTransmittedPkts64OctetsTotal number of transmitted packets that were
64 octets in length (excluding framing bits
but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.29 |
integraEifReceivedPkts65to127OctetsTotal number of received packets that were
between 65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.30 |
integraEifTransmittedPkts65to127OctetsTotal number of transmitted packets that were
between 65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.31 |
integraEifReceivedPkts128to255OctetsTotal number of received packets that were
between 128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.32 |
integraEifTransmittedPkts128to255OctetsTotal number of transmitted packets that were
between 128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.33 |
integraEifReceivedPkts256to511OctetsTotal number of received packets that were
between 256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.34 |
integraEifTransmittedPkts256to511OctetsTotal number of transmitted packets that were
between 256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.35 |
integraEifReceivedPkts512to1023OctetsTotal number of received packets that were
between 512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.36 |
integraEifTransmittedPkts512to1023OctetsTotal number of transmitted packets that were
between 512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.37 |
integraEifReceivedPkts1024to1518OctetsTotal number of received packets that were
between 1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.38 |
integraEifTransmittedPkts1024to1518OctetsTotal number of transmitted packets that were
between 1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.39 |
integraEifIfInBroadcastPktsThe total number of received good packets
that were directed to the broadcast address.
Note that this does not include multicast packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.40 |
integraEifIfOutBroadcastPktsThe total number of transmitted good packets
that were directed to the broadcast address.
Note that this does not include multicast packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.41 |
integraEifIfInMulticastPktsThe total number of received good packets
that were directed to a multicast address.
Note that this number does not include broadcast packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.42 |
integraEifIfOutMulticastPktsThe total number of transmitted good packets
that were directed to a multicast address.
Note that this number does not include broadcast packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.43 |
integraEifDot3InPauseFramesA count of MAC Control frames received on this
interface with an opcode indicating the PAUSE
operation.
This counter does not increment when the
interface is operating in half-duplex mode.ro Counter64 UNITS "frame" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.44 |
integraEifDot3OutPauseFramesA count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.ro Counter64 UNITS "frame" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.45 |
integraEifEtherStatsUndersizePktsThe total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.46 |
integraEifEtherStatsFragmentsThe total number of packets received that were less than
64 octets in length (excluding framing bits but including
FCS octets) and had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a
bad FCS with a non-integral number of octets (Alignment
Error).
Note that it is entirely normal for etherStatsFragments to
increment. This is because it counts both runts (which are
normal occurrences due to collisions) and noise hits.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.47 |
integraEifEtherStatsCRCAlignErrorsThe total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error).ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.48 |
integraEifEtherStatsJabbersThe total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.49 |
integraEifIngressBPSIngoing data transfer rate in bytes per second.ro Integer32 UNITS "Bps" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.50 |
integraEifIngressPPSIngoing data transfer rate in packets per second.ro Integer32 UNITS "pps" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.51 |
integraEifEgressBPSOutgoing data transfer rate in bytes per second.ro Integer32 UNITS "Bps" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.52 |
integraEifEgressPPSOutgoing data transfer rate in packets per second.ro Integer32 UNITS "pps" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.53 |
integraEifAllCoSQoutPacketsAll CoSQ outgoing packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.54 |
integraEifAllCoSQoutBytesAll CoSQ outgoing bytes.ro Counter64 UNITS "B" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.55 |
integraEifAllCoSQdroppedPacketsAll CoSQ dropped packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.56 |
integraEifAllCoSQdroppedBytesAll CoSQ dropped bytes.ro Counter64 UNITS "B" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.57 |
integraEifProcessedRxPacketsProcessed received packets.ro Counter64 UNITS "packet" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.58 |
integraEifProcessedRxBytesProcessed received bytes.ro Counter64 UNITS "B" .1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.59 |
integraEifLspPortAdminStateLSP port status.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.5.3 |
integraEifLspPortListLSP port status.ro Bits .1.3.6.1.4.1.7571.100.1.1.7.9.5.4 |
integraEifLspPortStatusLSP port status.ro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.5.5 |
integraEexecuteConfigThis object can only be set to 1.
It initiates new running configuration
applying using values, that have been set before.
Setting it when no new changes are available
will do nothing and return an error.
GET will return 0 if there were no errors,
while executing configuration or will return
a bitmask, that shows which SET requests have failed.
Those failed requests will be shown bit wise
from LSB as follows:
BIT0 radioTxMuteDuration
BIT1 radioTxFrequency
BIT2 radioTxPowerrw Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.6 |
integraEneedStoreThis object shows if there is unsaved,
but executed (running) configuration.
Unsaved changes will be lost after
device reboot. Unsaved entities are shown
bit wise, starting from LSB as follows:
BIT0 Aggregation
BIT1 Event log
BIT2 Modem
BIT3 Network
BIT4 Performance
BIT5 Radio
BIT6 SNMP
BIT7 Synchronous Ethernet
BIT8 Systemro Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.7 |
integraEstoreConfigThis object can only be set to 1.
It initiates saving of running configuration.
It will only work if there are unsaved,
but executed (running) changes (configuration).
Setting it when no new running configuration
is available will do nothing and return an error.rw Enumeration .1.3.6.1.4.1.7571.100.1.1.7.9.8 |
integraEnetCfg OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.9.9 |
integraEnetCfgIPaddressLocal IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.9.1 |
integraEnetCfgIPmaskLocal IP maskrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.9.2 |
integraEnetCfgIPgatewayIP gateway
Send '0' or '255.255.255.255' to clear.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.9.3 |
integraEnetCfgRemoteIPaddressRemote IP addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7571.100.1.1.7.9.9.4 |
integraEConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.9.10 |
integraECompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.9.10.1 |
integraEGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7571.100.1.1.7.9.10.2 |