RM1-MIB
The MIB module for entities implementing the xxxx protocol.
Main OID:
rm1.1.3.6.1.4.1.1751.1.1198.4.1
55
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
55 total| Object Name |
|---|
lucent OBJECT IDENTIFIER .1.3.6.1.4.1.1751 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1751 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1 |
softSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198 |
resourceMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.4 |
rm1The MIB module for entities implementing the xxxx
protocol. MODULE-IDENTITY .1.3.6.1.4.1.1751.1.1198.4.1 |
rmSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.4.1.1 |
rmDescrA textual description of the entity. This value
should include the full name and version
identification of the resource monitor software.
It is mandatory that this only contain printable
ASCII characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.1.1198.4.1.1.1 |
rmObjectIDAn internal identification for this resource monitor.ro OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.4.1.1.2 |
rmUpTimeThe time (in hundredths of a second) since the
resource monitor deamon was last re-initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1751.1.1198.4.1.1.3 |
rmNetAddressThe ip address of the host on which this deamon
is running.ro NetworkAddress .1.3.6.1.4.1.1751.1.1198.4.1.1.4 |
rmControlThis is the settable field that in turn controls
some of the functioning of the resource monitor.
At present, this field is not used. It has been
created for future expansion.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.1.1198.4.1.1.5 |
rmDiskGrp OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.4.1.2 |
diskPeriodDefines disk monitoring frequency. Period in seconds.
It is a settable field, so user can alter how frequently
the file systems are checked for size limits.rw INTEGER ( 1..60 ) .1.3.6.1.4.1.1751.1.1198.4.1.2.1 |
diskUsageWarningPctIf disk usage exceeds this amount of percentage,
a diskAttention trap will be emitted.
severity: MAJORrw INTEGER ( 1..99 ) .1.3.6.1.4.1.1751.1.1198.4.1.2.2 |
diskUsageAlarmPctIf Disk usage exceeds this mount of percentage,
a diskAlarm trap will be emitted.
severity: CRITICALrw INTEGER ( 1..99 ) .1.3.6.1.4.1.1751.1.1198.4.1.2.3 |
duNumberThe number of file systems being monitored.
(indicates the number of rows in diskUsageTable)ro INTEGER ( 1.. 2048 ) .1.3.6.1.4.1.1751.1.1198.4.1.2.4 |
diskUsageTableA list of file system entries. The number of
entries is given by the value of duNumber. SEQUENCE OF DUEntry .1.3.6.1.4.1.1751.1.1198.4.1.2.5 |
diskUsageEntry DUEntry .1.3.6.1.4.1.1751.1.1198.4.1.2.5.1 |
duIndexA unique value for each disk slice. Goes from 1 to Nro INTEGER ( 1..2048 ) .1.3.6.1.4.1.1751.1.1198.4.1.2.5.1.1 |
duFSNameThe name of the file system being monitoredro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.1.1198.4.1.2.5.1.2 |
duSizeThe size of the file system in k bytesro INTEGER ( 1..8192 ) .1.3.6.1.4.1.1751.1.1198.4.1.2.5.1.3 |
duPctUsedThe percentage of the file system used upro INTEGER ( 0..99 ) .1.3.6.1.4.1.1751.1.1198.4.1.2.5.1.4 |
rmCpuGrp OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.4.1.3 |
cpuPeriodDefines cpu monitoring frequency. The CPU load
and utilization are measure as per this frequency.
Period can be either one, ten or fifteen minutes.
Setting it to any other value will cause the set
to fail (the old value will stay).rw INTEGER ( 1..15 ) .1.3.6.1.4.1.1751.1.1198.4.1.3.1 |
cpuUtilizationThe current cpu utilization percentage.ro INTEGER ( 1..99 ) .1.3.6.1.4.1.1751.1.1198.4.1.3.2 |
cpuUtilWarningPctIf cpu utlization exceeds this percentage,
a cpuUtilAttention trap will be emitted.
severity: MAJORrw INTEGER ( 1..99 ) .1.3.6.1.4.1.1751.1.1198.4.1.3.3 |
cpuUtilAlarmPctIf CPU utilization exceeds this percentage,
a cpuUtilAlarm trap will be emitted.
severity: CRITICALrw INTEGER ( 1..99 ) .1.3.6.1.4.1.1751.1.1198.4.1.3.4 |
cpuLoadThe current value of cpu load. Note: Although
the syntax is DisplayString, the real semantics
should be floating point value of cpu load.
For example: 0.3, 2.5, etc.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.1.1198.4.1.3.5 |
cpuLoadWarningThresholdIf cpu load exceeds this amount,
a cpuLoadAttention trap will be emitted.
severity: MAJOR
Note: Although the syntax is DisplayString,
the real semantics should be floating point value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.1.1198.4.1.3.6 |
cpuLoadAlarmThresholdIf cpu load exceeds this amount,
a cpuLoadAlarm trap will be emitted.
severity: CRITICAL
Note: Although the syntax is DisplayString,
the real semantics should be floating point value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.1.1198.4.1.3.7 |
rmFileGrp OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.4.1.4 |
filePeriodDefines log file monitoring frequency. This
value is expressed as the number of minutes.rw INTEGER ( 1..60 ) .1.3.6.1.4.1.1751.1.1198.4.1.4.1 |
fmNumberThe number of files being monitored by this
deamon.ro INTEGER ( 1..8192 ) .1.3.6.1.4.1.1751.1.1198.4.1.4.2 |
fmTableA list of files being monitored for size. SEQUENCE OF FileEntry .1.3.6.1.4.1.1751.1.1198.4.1.4.3 |
fmEntryEach entry represents one log file, and is a
sequence of type FileEntry, which is explained below. FileEntry .1.3.6.1.4.1.1751.1.1198.4.1.4.3.1 |
fmIndexA unique number for each file being monitored.
Goes from 1 to Nro INTEGER ( 1..8192 ) .1.3.6.1.4.1.1751.1.1198.4.1.4.3.1.1 |
fmNamethe absolute path for the file being monitored.ro DisplayString .1.3.6.1.4.1.1751.1.1198.4.1.4.3.1.2 |
fmCurSizeThe is the current size of the file.ro INTEGER ( 1..8192 ) .1.3.6.1.4.1.1751.1.1198.4.1.4.3.1.3 |
fmThresholdThis is the size above which a FileSizeEvent trap
will be sent out. This information is read from
the config directory when the RMpep is started.ro INTEGER ( 1..8192 ) .1.3.6.1.4.1.1751.1.1198.4.1.4.3.1.4 |
archiveDirThis variable returns the current archive
directory.
ResMon may be periodically asked to archive
log files. After detecting and reporting a
fileOversize event, resMon may also be told
to archive the log file along with file
monitoring target switch.
The current running policy determines the
archive action.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.1.1198.4.1.4.4 |
rmProcessGrp OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.4.1.5 |
processPeriodDefines process monitoring frequency. Period in seconds.
It is a settable field, so user can alter how frequently
the processes are checked for CPU and memory utilizationrw INTEGER ( 1..60 ) .1.3.6.1.4.1.1751.1.1198.4.1.5.1 |
processNumberThe number of processes being monitored.
(indicates the number of rows in processTable)ro INTEGER ( 1..8192 ) .1.3.6.1.4.1.1751.1.1198.4.1.5.2 |
processTableA list of process entries. The number of
entries is given by the value of processNumber. SEQUENCE OF ProcessEntry .1.3.6.1.4.1.1751.1.1198.4.1.5.3 |
processEntry ProcessEntry .1.3.6.1.4.1.1751.1.1198.4.1.5.3.1 |
processIndexA unique value for each process. Goes from 1 to Nro INTEGER ( 1..8192 ) .1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.1 |
processIDA unique value for each process.ro INTEGER ( 1..65535 ) .1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.2 |
processNameThe name of the process.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.3 |
processUpTimeThe time since the process is up running.ro INTEGER ( 1..65535 ) .1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.4 |
processCPUUsageWarnMarkThe threshold when resMon should generate a warning for netMon.ro INTEGER ( 1..99 ) .1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.5 |
processCPUUsageAlarmMarkThe threshold when resMon should generate a alarm for netMon.ro INTEGER ( 1..99 ) .1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.6 |
processCPUUsageCurrentThe amount of CPU time this process used.ro INTEGER ( 1..99 ) .1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.7 |
processMemUsageAlarmMarkThe memory usage threshold when resMon should generate a memory usage alarm for netMon.ro INTEGER ( 1..99 ) .1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.8 |
processMemUsageCurrentThe amount of memory this process used.ro INTEGER ( 1..8192 ) .1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.9 |