RITTAL-CMC-III-MIB
AI MIB Summary
The RITTAL-CMC-III-MIB enables SNMP-based monitoring and management of Rittal CMC III climate control units, exposing critical environmental telemetry such as temperature, humidity, fan status, and alarm states. This module facilitates the collection of operational metrics required for data center infrastructure monitoring and automated alerting within Rittal's environmental control ecosystem.
The MIB module for representing cmcIII SNMP agent
Main OID:
cmcIII.1.3.6.1.4.1.2606.7
202
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
202 total| Object Name |
|---|
cmcIIIThe MIB module for representing cmcIII SNMP agent MODULE-IDENTITY .1.3.6.1.4.1.2606.7 |
cmcIIINotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.0 |
alarmSensorDeviceAlarm of sensors of device NOTIFICATION-TYPE .1.3.6.1.4.1.2606.7.0.1 |
alarmDeviceAlarm of device NOTIFICATION-TYPE .1.3.6.1.4.1.2606.7.0.2 |
cmcIIIMibRev OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.1 |
cmcIIIMibMajRevThe Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information, correct interpretation of data may require a MIB document with the same major revision level.ro Unsigned32 .1.3.6.1.4.1.2606.7.1.1 |
cmcIIIMibMinRevThe Minor Revision level. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred.ro Unsigned32 .1.3.6.1.4.1.2606.7.1.2 |
cmcIIIAgentRevThe SNMP Agent Revision level.ro DisplayString .1.3.6.1.4.1.2606.7.1.3 |
cmcIIIUnit OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.2 |
cmcIIIUnitStatusGeneral Status of CMCIII PU unit itself (1) OK (2) failed (3) overload (current too high)ro Enumeration .1.3.6.1.4.1.2606.7.2.1 |
cmcIIIUnitURLURL of CMCIII PUro DisplayString .1.3.6.1.4.1.2606.7.2.2 |
cmcIIIUnitHWRevHardware Revision of CMCIII PUro DisplayString .1.3.6.1.4.1.2606.7.2.3 |
cmcIIIUnitFWRevFirmware Revision of CMCIII PUro DisplayString .1.3.6.1.4.1.2606.7.2.4 |
cmcIIIUnitOSRevLinux Revision of CMCIII PUro DisplayString .1.3.6.1.4.1.2606.7.2.5 |
cmcIIIUnitSerialSerial Number of CMCIII PUro DisplayString .1.3.6.1.4.1.2606.7.2.6 |
cmcIIIUnitProdProduction Code of CMCIII PUro DisplayString .1.3.6.1.4.1.2606.7.2.7 |
cmcIIIUnitTypeType of CMCIII (1) Unit unknown (2) Processing Unit (3) Processing Unit Compact (4) LCP (5) PDUiro Enumeration .1.3.6.1.4.1.2606.7.2.8 |
cmcIIIUnitCurrentSourceCurrent source of CMCIII PU (1) unknown (2) AC Adapter Power Supply (3) Terminal Strip (4) poe: Power Over Ethernet (5) usb: Universal Serial Busro Enumeration .1.3.6.1.4.1.2606.7.2.9 |
cmcIIICan0CurrentConsumptionMaximal current consumption required by CANopen fieldbus 1ro Integer32 .1.3.6.1.4.1.2606.7.2.10 |
cmcIIICan1CurrentConsumptionMaximal current consumption required by CANopen fieldbus 2ro Integer32 .1.3.6.1.4.1.2606.7.2.11 |
cmcIIIUnitUpTimeOperating time of CMCIII PUro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.2.12 |
cmcIIISetup OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.3 |
cmcIIILastChangeSetupLast change of configuration according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.3.1 |
cmcIIISetupGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.3.2 |
cmcIIISetTempUnitUnit of all temperature values and setpointsrw Enumeration .1.3.6.1.4.1.2606.7.3.2.1 |
cmcIIISetBeeperAudible alarm in CMCIII unit: (1) beeper is off (general) (2) beeper is onrw Enumeration .1.3.6.1.4.1.2606.7.3.2.2 |
cmcIIIQuitRelayEnable or disable acknowledging currently active alarm relay (with 'C' on CMCIII).rw Enumeration .1.3.6.1.4.1.2606.7.3.2.3 |
cmcIIILogicRelayLogic of alarm relay: (1) Relay will pick up in case of an alarm (2) Relay will release in case of an alarm (3) Relay disabledrw Enumeration .1.3.6.1.4.1.2606.7.3.2.4 |
cmcIIIUnitMsgRelayAlarm relay in case of Device Messages (detect, lost, changed..): (1) Relay disabled, relay will not switch in case of a device message (2) Relay enabled, relay will switch in case of a unit messagerw Enumeration .1.3.6.1.4.1.2606.7.3.2.5 |
cmcIIIFunctionRelayLogic of alarm relay: (1) Relay will switch in case of a warning only (2) Relay will switch in case of an alarm only (3) Relay will switch in case of an alarm or warningrw Enumeration .1.3.6.1.4.1.2606.7.3.2.6 |
cmcIIITimeZoneTime Zone 0 : (GMT-12:00) International Date Line West 1 : (GMT-11:00) Midway Island, Samoa 2 : (GMT-10:00) Hawaii 3 : (GMT-09:00) Alaska 4 : (GMT-08:00) Pacific Time (US and Canada), Tijuana 5 : (GMT-07:00) Arizona 6 : (GMT-07:00) Chihuahua, La Paz, Mazatlan 7 : (GMT-07:00) Mountain Time (US & Canada) 8 : (GMT-06:00) Central America 9 : (GMT-06:00) Central Time (US and Canada) 10 : (GMT-06:00) Guadalajara, Mexico City, Monterrey 11 : (GMT-06:00) Saskatchewan 12 : (GMT-05:00) Bogota, Lima, Quito 13 : (GMT-05:00) Eastern Time (Us and Canada) 14 : (GMT-05:00) Indiana (East) 15 : (GMT-04:00) Atlantic Time (Canada) 16 : (GMT-04:00) Caracas, La Paz 17 : (GMT-04:00) Santiago 18 : (GMT-03:30) Newfoundland 19 : (GMT-03:00) Brasilia 20 : (GMT-03:00) Buenos Aires, Georgetown 21 : (GMT-03:00) Greenland 22 : (GMT-02:00) Mid-Atlantic 23 : (GMT-01:00) Azores 24 : (GMT-01:00) Cape Verde Is. 25 : (GMT) Casablanca, Monrovia 26 : (GMT) Greenwich Mean Time : Dublin, Lisbon, London 27 : (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Vienna 28 : (GMT+01:00) Belgrade, Bratislava, Budapest, Prague 29 : (GMT+01:00) Brussels, Copenhagen, Madrid, Paris 30 : (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb 31 : (GMT+01:00) West Central Africa 32 : (GMT+02:00) Athens, Istanbul, Minsk 33 : (GMT+02:00) Bucharest 34 : (GMT+02:00) Harare, Pretoria 35 : (GMT+02:00) Helsinki, Kyiv, Sofia 36 : (GMT+02:00) Riga, Tallinn, Vilnius 37 : (GMT+02:00) Jerusalem 38 : (GMT+03:00) Baghdad 39 : (GMT+03:00) Kuwait, Riyadh 40 : (GMT+03:00) Moscow, St. Petersburg, Volgograd 41 : (GMT+03:00) Nairobi 42 : (GMT+03:30) Tehran 43 : (GMT+04:00) Abu Dhabi, Muscat 44 : (GMT+04:00) Baku, Tbilisi, Yerevan 45 : (GMT+04:30) Kabul 46 : (GMT+05:00) Ekaterinburg 47 : (GMT+05:00) Islamabad, Karachi, Tashkent 48 : (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi 49 : (GMT+05:45) Kathmandu 50 : (GMT+06:00) Almaty, Novosibirsk 51 : (GMT+06:00) Astana, Dhaka 52 : (GMT+06:00) Sri Jayawardenepura 53 : (GMT+06:30) Rangoon 54 : (GMT+07:00) Bangkok, Hanoi, Jakarta 55 : (GMT+07:00) Krasnoyarsk 56 : (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi 57 : (GMT+08:00) Irkutsk, Ulaan Bataar 58 : (GMT+08:00) Kuala Lumpur, Singapore 59 : (GMT+08:00) Perth 60 : (GMT+08:00) Taipei 61 : (GMT+09:00) Osaka, Sapporo, Tokyo 62 : (GMT+09:00) Seoul 63 : (GMT+09:00) Yakutsk 64 : (GMT+09:30) Adelaide 65 : (GMT+09:30) Darwin 66 : (GMT+10:00) Brisbane 67 : (GMT+10:00) Canberra, Melbourne, Sydney 68 : (GMT+10:00) Guam, Port Moresby 69 : (GMT+10:00) Hobart 70 : (GMT+10:00) Vladivostok 71 : (GMT+11:00) Magadan, Solomon Is., New Caledonia 72 : (GMT+12:00) Auckland, Wellington 73 : (GMT+12:00) Fiji, Kamchatka, Marshall Is. 74 : (GMT+13:00) Nukualofarw Integer32 .1.3.6.1.4.1.2606.7.3.2.7 |
cmcIIISetupDateActual date in format DD.MM.YYYY Use UTC date to set date.rw DisplayString .1.3.6.1.4.1.2606.7.3.2.8 |
cmcIIISetupTimeActual time in format HH:MM:SS, HH (0-23), MM (0-59), SS (0-59). Use UTC time to set time.rw DisplayString .1.3.6.1.4.1.2606.7.3.2.9 |
cmcIIIWebAccessWeb access status: (0) httpEnabled : http protocol is enabled (1) httpsEnabled : https protocol is enabledrw Bits .1.3.6.1.4.1.2606.7.3.2.10 |
cmcIIIHttpPortTCP/IP port of HTTP daemonrw Unsigned32 .1.3.6.1.4.1.2606.7.3.2.11 |
cmcIIIHttpsPortTCP/IP port of HTTPS daemonrw Unsigned32 .1.3.6.1.4.1.2606.7.3.2.12 |
cmcIIIFtpAccessFtp access: (1) disabled (2) enabledrw Enumeration .1.3.6.1.4.1.2606.7.3.2.13 |
cmcIIIFtpPortTCP/IP port of FTP daemonrw Unsigned32 .1.3.6.1.4.1.2606.7.3.2.14 |
cmcIIISshAccessSsh access: (1) disabled (2) enabledrw Enumeration .1.3.6.1.4.1.2606.7.3.2.15 |
cmcIIISshPortTCP/IP port of SSH daemonrw Unsigned32 .1.3.6.1.4.1.2606.7.3.2.16 |
cmcIIITelnetAccessTelnet access: (1) disabled (2) enabledrw Enumeration .1.3.6.1.4.1.2606.7.3.2.17 |
cmcIIITelnetPortTCP/IP port of telnet daemonrw Unsigned32 .1.3.6.1.4.1.2606.7.3.2.18 |
cmcIIILanguageLanguage: (1) English, (2) otherrw Enumeration .1.3.6.1.4.1.2606.7.3.2.19 |
cmcIIISetupTimer OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.3.3 |
cmcIIINumberOfTimersNumber of value table entries=number of outlets available on this unitro Integer32 .1.3.6.1.4.1.2606.7.3.3.1 |
cmcIIITimerTableHeadline of Timer Table SEQUENCE OF CmcIIITimerEntry .1.3.6.1.4.1.2606.7.3.3.2 |
cmcIIITimerEntryEntries of Timer Table CmcIIITimerEntry .1.3.6.1.4.1.2606.7.3.3.2.1 |
cmcIIITimerIndexIndex for the list of timer entries. Its value ranges between 1 and the value of cmcIIINumberOfTimers. Unsigned32 .1.3.6.1.4.1.2606.7.3.3.2.1.1 |
cmcIIITimerStatusActual status of the timerro Enumeration .1.3.6.1.4.1.2606.7.3.3.2.1.2 |
cmcIIITimerDayOfWeekSelection of day of week for timer to switchrw Enumeration .1.3.6.1.4.1.2606.7.3.3.2.1.3 |
cmcIIITimeOnTime to switch on current function, Format: HH:MMrw DisplayString .1.3.6.1.4.1.2606.7.3.3.2.1.4 |
cmcIIITimeOffTime to switch off current function, Format: HH:MMrw DisplayString .1.3.6.1.4.1.2606.7.3.3.2.1.5 |
cmcIIITimeControlControl via RTCrw Enumeration .1.3.6.1.4.1.2606.7.3.3.2.1.6 |
cmcIIITimerFunctionFunction which is controlled via timer 1: Unlock of doors via keypad is disabled 2: Doors will be unlocked 3-6: sending traps to this trap receiver will be disabled 7-10: sending SMS to phone number 1..4 will be disabled 11-18: Scheduled alarm offrw Enumeration .1.3.6.1.4.1.2606.7.3.3.2.1.7 |
cmcIIISetupTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.3.4 |
cmcIIINumberOfTrapReceiversNumber of TrapReceiverTable entries. The number of trap receiversro Integer32 .1.3.6.1.4.1.2606.7.3.4.1 |
cmcIIITrapReceiverTableA list of trap receiver entries SEQUENCE OF CmcIIITrapReceiverEntry .1.3.6.1.4.1.2606.7.3.4.2 |
cmcIIITrapReceiverEntryEntries of trapTable CmcIIITrapReceiverEntry .1.3.6.1.4.1.2606.7.3.4.2.1 |
cmcIIITrapReceiverIndexIndex for the trap receiver table. Its value ranges between 1 and the value of NumberOfTrapReceivers Unsigned32 .1.3.6.1.4.1.2606.7.3.4.2.1.1 |
cmcIIITrapReceiverStatusEnable trap version or disable trap receiverrw Enumeration .1.3.6.1.4.1.2606.7.3.4.2.1.2 |
cmcIIITrapReceiverIpAddressIP address of trap receiverrw DisplayString .1.3.6.1.4.1.2606.7.3.4.2.1.3 |
cmcIIISetupSMTP OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.3.5 |
cmcIIISmtpStatusSMTP (email) usage: (1) disabled (2) enabledrw Enumeration .1.3.6.1.4.1.2606.7.3.5.1 |
cmcIIISmtpServerIP address of SMTP serverrw DisplayString .1.3.6.1.4.1.2606.7.3.5.2 |
cmcIIISmtpPortTCP/IP port of SMTP serverrw Unsigned32 .1.3.6.1.4.1.2606.7.3.5.3 |
cmcIIISmtpAuthSMTP authentication usage: (1) disabled (2) enabledrw Enumeration .1.3.6.1.4.1.2606.7.3.5.4 |
cmcIIISmtpUsernameUsername required to authenticate at the SMTP serverrw DisplayString .1.3.6.1.4.1.2606.7.3.5.5 |
cmcIIISmtpPasswordPassword required to authenticate at the SMTP serverrw DisplayString .1.3.6.1.4.1.2606.7.3.5.6 |
cmcIIISmtpSenderSender address (FROM:) of the SMTP messagerw DisplayString .1.3.6.1.4.1.2606.7.3.5.7 |
cmcIIISmtpReplyReply address (REPLY:) of the SMTP messagerw DisplayString .1.3.6.1.4.1.2606.7.3.5.8 |
cmcIIINumberOfSmtpReceiversNumber of SmtpReceiverTable entries. The number of SMTP receiversro Integer32 .1.3.6.1.4.1.2606.7.3.5.9 |
cmcIIISmtpReceiverTableA list of SMTP receiver entries SEQUENCE OF CmcIIISmtpReceiverEntry .1.3.6.1.4.1.2606.7.3.5.10 |
cmcIIISmtpReceiverEntryEntries of SMTPTable CmcIIISmtpReceiverEntry .1.3.6.1.4.1.2606.7.3.5.10.1 |
cmcIIISmtpReceiverIndexIndex for the SMTP receiver table. Its value ranges between 1 and the value of NumberOfSmtpReceivers Unsigned32 .1.3.6.1.4.1.2606.7.3.5.10.1.1 |
cmcIIISmtpReceiverStatusEnable or disable SMTP receiverrw Enumeration .1.3.6.1.4.1.2606.7.3.5.10.1.2 |
cmcIIISmtpReceiverAddressIP address of SMTP receiverrw DisplayString .1.3.6.1.4.1.2606.7.3.5.10.1.3 |
cmcIIISetupSMS OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.3.6 |
cmcIIISmsStatusSMS usage: (1) disabled (2) enabledrw Enumeration .1.3.6.1.4.1.2606.7.3.6.1 |
cmcIIISmsPINSMS PIN numberrw DisplayString .1.3.6.1.4.1.2606.7.3.6.2 |
cmcIIISmsServiceSMS service numberrw DisplayString .1.3.6.1.4.1.2606.7.3.6.3 |
cmcIIISmsMSNSMS MSN for ISDNrw DisplayString .1.3.6.1.4.1.2606.7.3.6.4 |
cmcIIISmsPreDialSMS PreDial numberrw DisplayString .1.3.6.1.4.1.2606.7.3.6.5 |
cmcIIINumberOfSmsReceiversNumber of SmsReceiverTable entries. The number of SMS receiversro Integer32 .1.3.6.1.4.1.2606.7.3.6.6 |
cmcIIISmsReceiverTableA list of SMS receiver entries SEQUENCE OF CmcIIISmsReceiverEntry .1.3.6.1.4.1.2606.7.3.6.7 |
cmcIIISmsReceiverEntryEntries of SMSTable CmcIIISmsReceiverEntry .1.3.6.1.4.1.2606.7.3.6.7.1 |
cmcIIISmsReceiverIndexIndex for the SMS receiver table. Its value ranges between 1 and the value of NumberOfSmsReceivers Unsigned32 .1.3.6.1.4.1.2606.7.3.6.7.1.1 |
cmcIIISmsReceiverStatusEnable or disable SMS receiverrw Enumeration .1.3.6.1.4.1.2606.7.3.6.7.1.2 |
cmcIIISmsReceiverNumberPhone number of SMS receiverrw DisplayString .1.3.6.1.4.1.2606.7.3.6.7.1.3 |
cmcIIISetupSysLog OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.3.7 |
cmcIIISysLogStatusSysLog usage: (1) disabled (2) enabledrw Enumeration .1.3.6.1.4.1.2606.7.3.7.1 |
cmcIIISysLogFacilitySysLog facility local0..7rw Enumeration .1.3.6.1.4.1.2606.7.3.7.2 |
cmcIIISysLogServer1IP address of first SysLog serverrw DisplayString .1.3.6.1.4.1.2606.7.3.7.3 |
cmcIIISysLogServer2IP address of second SysLog serverrw DisplayString .1.3.6.1.4.1.2606.7.3.7.4 |
cmcIIISetupNTP OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.3.8 |
cmcIIINtpStatusNTP usage: (1) disabled (2) enabledrw Enumeration .1.3.6.1.4.1.2606.7.3.8.1 |
cmcIIINtpTimeZoneNTP time zone, see cmcIIITimeZone for valid time zonesrw Integer32 .1.3.6.1.4.1.2606.7.3.8.2 |
cmcIIINtpServer1IP address of first NTP serverrw DisplayString .1.3.6.1.4.1.2606.7.3.8.3 |
cmcIIINtpServer2IP address of second NTP serverrw DisplayString .1.3.6.1.4.1.2606.7.3.8.4 |
cmcIIISetupLDAP OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.3.9 |
cmcIIILdapStatusLDAP usage: (1) disabled (2) enabledrw Enumeration .1.3.6.1.4.1.2606.7.3.9.1 |
cmcIIILdapServerIP address of LDAP serverrw DisplayString .1.3.6.1.4.1.2606.7.3.9.2 |
cmcIIIDevice OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.4 |
cmcIIIDevs OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.4.1 |
cmcIIIDevInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.4.1.1 |
cmcIIIOverallDevStatusOverall status of all devicesro Enumeration .1.3.6.1.4.1.2606.7.4.1.1.1 |
cmcIIINumberOfDevsNumber of devices availablero Integer32 .1.3.6.1.4.1.2606.7.4.1.1.2 |
cmcIIILastChangeOverallDevStatusTimestamp of last status change of any device connected to CMCIII PU according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.4.1.1.3 |
cmcIIILastChangeNumberOfDevsTimestamp of last device number change according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.4.1.1.4 |
cmcIIILastChangeDevSettingsTimestamp of last setting change of any device connected to CMCIII PU according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.4.1.1.5 |
cmcIIILastChangeDevsTimestamp of last device change according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.4.1.1.6 |
cmcIIIDevTableHeadline of device table SEQUENCE OF CmcIIIDevEntry .1.3.6.1.4.1.2606.7.4.1.2 |
cmcIIIDevEntryEntries of device table CmcIIIDevEntry .1.3.6.1.4.1.2606.7.4.1.2.1 |
cmcIIIDevIndexIndex of device connected to CMCIII PU Unsigned32 .1.3.6.1.4.1.2606.7.4.1.2.1.1 |
cmcIIIDevNameName of the device connected to CMCIII PUro DisplayString .1.3.6.1.4.1.2606.7.4.1.2.1.2 |
cmcIIIDevAliasDescriptional text for device connected to CMCIII PUrw DisplayString .1.3.6.1.4.1.2606.7.4.1.2.1.3 |
cmcIIIDevTypeType of device chassis connected to CMCIII PU. The authoritative identification of the device contained in the entity is allocated within the SMI cmcIIIProducts subtree (1.3.6.1.4.1.2606.7.7) and provides an easy and unambiguous means for determining `what kind of box' is connected. E.g.: in cmcIIIProductChassis (1.3.6.1.4.1.2606.7.7.4.x) the placeholder x is used for 1 : Not Available 2 : Internal Device of Processing Unit 3 : Virtual Device 4 : Temperature Sensor 7030.110 5 : Temp/Humidity Sensor 7030.111 6 : Vandalism Sensor 7030.130 7 : Access Sensor 7030.120 8 : Door Lock Device 7030.200, .210 9 : Universal Sensor 7030.190 10: Sensor Gateway 7030.100 11: Power Unit 7030.050 12: Pressure Sensor 7030.150 20-25: Gateways to RS422, RS485ro OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.4.1.2.1.4 |
cmcIIIDevNodeIDNode ID of device connected to CMCIII PUro Integer32 .1.3.6.1.4.1.2606.7.4.1.2.1.5 |
cmcIIIDevStatusGeneral Status of device connected to CMCIII PU (1) Device not available (2) OK (3) Device detected, confirmation required (4) Device lost (disconnected), confirmation required (5) Device changed (6) Errorro Enumeration .1.3.6.1.4.1.2606.7.4.1.2.1.6 |
cmcIIIDevArtNrArticle number of device connected to CMCIII PUro DisplayString .1.3.6.1.4.1.2606.7.4.1.2.1.7 |
cmcIIIDevLocationLocation of device connected to CMCIII PUrw DisplayString .1.3.6.1.4.1.2606.7.4.1.2.1.8 |
cmcIIIDevBusCAN bus of device connected to CMCIII PUro Enumeration .1.3.6.1.4.1.2606.7.4.1.2.1.9 |
cmcIIIDevPosPosition (order) of device in CAN bus connected to CMCIII PUro Integer32 .1.3.6.1.4.1.2606.7.4.1.2.1.10 |
cmcIIIDevFWFW version of device connected to CMCIII PUro DisplayString .1.3.6.1.4.1.2606.7.4.1.2.1.11 |
cmcIIIDevHWHW version of device connected to CMCIII PUro DisplayString .1.3.6.1.4.1.2606.7.4.1.2.1.12 |
cmcIIIDevSerialSerial number of device connected to CMCIII PUro DisplayString .1.3.6.1.4.1.2606.7.4.1.2.1.13 |
cmcIIIDevProductWeekProduction week of device connected to CMCIII PUro DisplayString .1.3.6.1.4.1.2606.7.4.1.2.1.14 |
cmcIIIDevLastChangeTimestamp of last change of device connected to CMCIII PU according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.4.1.2.1.15 |
cmcIIIDevURLURL to device page of CMCIII PU (if available)ro DisplayString .1.3.6.1.4.1.2606.7.4.1.2.1.16 |
cmcIIIDevNumberOfVarsNumber of variables available on this device. This variable will give the number of rows of the variable table cmcIIIVarTable belonging to this devicero Integer32 .1.3.6.1.4.1.2606.7.4.1.2.1.17 |
cmcIIIDevNumberOfMsgsNumber of messages available in this device. This variable will give the number of rows of the message table cmcIIIMsgTable belonging to this devicero Integer32 .1.3.6.1.4.1.2606.7.4.1.2.1.18 |
cmcIIIDevStatusTextLatest status of this devicero DisplayString .1.3.6.1.4.1.2606.7.4.1.2.1.19 |
cmcIIIDevCurrentMinConsumptionStandby power consumption of device in mAro Integer32 .1.3.6.1.4.1.2606.7.4.1.2.1.20 |
cmcIIIDevCurrentMaxConsumptionMaximal power consumption of device in mAro Integer32 .1.3.6.1.4.1.2606.7.4.1.2.1.21 |
cmcIIIDevEntPhysicalIndexCorresponding entPhysicalIndex of this device. 0 if none exists.ro Integer32 .1.3.6.1.4.1.2606.7.4.1.2.1.22 |
cmcIIIVars OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.4.2 |
cmcIIIVarInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.4.2.1 |
cmcIIINumberOfVarsTotal number of variables availablero Integer32 .1.3.6.1.4.1.2606.7.4.2.1.1 |
cmcIIILastChangeNumberOfVarsTimestamp of last change number of variables according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.4.2.1.2 |
cmcIIILastChangeVarSettingsTimestamp of last setting change according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.4.2.1.3 |
cmcIIILastChangeVarsTimestamp of last variable change according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.4.2.1.4 |
cmcIIIVarTableHeadline of variable table SEQUENCE OF CmcIIIVariableEntry .1.3.6.1.4.1.2606.7.4.2.2 |
cmcIIIVarEntryEntries of variable table CmcIIIVariableEntry .1.3.6.1.4.1.2606.7.4.2.2.1 |
cmcIIIVarDeviceIndexIndex for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs. Unsigned32 .1.3.6.1.4.1.2606.7.4.2.2.1.1 |
cmcIIIVarIndexIndex for the list of value entries. Its value ranges between 1 and the value of cmcIIINumberOfVars. Unsigned32 .1.3.6.1.4.1.2606.7.4.2.2.1.2 |
cmcIIIVarNameClear name of variablero DisplayString .1.3.6.1.4.1.2606.7.4.2.2.1.3 |
cmcIIIVarTypeType of variablero Enumeration .1.3.6.1.4.1.2606.7.4.2.2.1.4 |
cmcIIIVarUnitUnit of variable e. g. degree Cro DisplayString .1.3.6.1.4.1.2606.7.4.2.2.1.5 |
cmcIIIVarDatatypeDatatype of variablero Enumeration .1.3.6.1.4.1.2606.7.4.2.2.1.6 |
cmcIIIVarScaleScaling factor of variable value, e. g. -100 -> value has to be divided by 100 +100 -> value has to be multiplied by 100ro Integer32 .1.3.6.1.4.1.2606.7.4.2.2.1.7 |
cmcIIIVarConstraintsConstraints of value, e. g. [-_ a-zA-Z0-9]+ (if VariableDatatype is 'string')ro DisplayString .1.3.6.1.4.1.2606.7.4.2.2.1.8 |
cmcIIIVarStepsSteps of variable value (resolution)ro Integer32 .1.3.6.1.4.1.2606.7.4.2.2.1.9 |
cmcIIIVarValueStrValue as string, including sign (+/-) and unit (deg C)rw DisplayString .1.3.6.1.4.1.2606.7.4.2.2.1.10 |
cmcIIIVarValueIntValue as intrw Integer32 .1.3.6.1.4.1.2606.7.4.2.2.1.11 |
cmcIIIVarLastChangeTimestamp of last update or change according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.4.2.2.1.12 |
cmcIIIVarAccessAccess for valuero Enumeration .1.3.6.1.4.1.2606.7.4.2.2.1.13 |
cmcIIIVarQualityQuality of variablero Enumeration .1.3.6.1.4.1.2606.7.4.2.2.1.14 |
cmcIIIVarEntPhysicalIndexCorresponding entPhysicalIndex of this variable. 0 if none exists.ro Integer32 .1.3.6.1.4.1.2606.7.4.2.2.1.15 |
cmcIIIMsgs OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.4.3 |
cmcIIIMsgInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.4.3.1 |
cmcIIIOverallMsgStatusOverall message status of devicero Enumeration .1.3.6.1.4.1.2606.7.4.3.1.1 |
cmcIIINumberOfMsgsNumber of messages. All status vars available in cmcIIIVarTable will cause a message in cmcIIIMsgTable.ro Integer32 .1.3.6.1.4.1.2606.7.4.3.1.2 |
cmcIIILastChangeOverallMsgStatusTimestamp of last status change according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.4.3.1.3 |
cmcIIILastChangeNumberOfMsgsTimestamp of last message number change according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.4.3.1.4 |
cmcIIILastChangeMsgSettingsTimestamp of last setting change according to operating time cmcIIIUnitUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2606.7.4.3.1.5 |
cmcIIIMsgTableHeadline of message table SEQUENCE OF CmcIIIMsgEntry .1.3.6.1.4.1.2606.7.4.3.2 |
cmcIIIMsgEntryEntries of message table CmcIIIMsgEntry .1.3.6.1.4.1.2606.7.4.3.2.1 |
cmcIIIMsgDeviceIndexIndex for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs. Unsigned32 .1.3.6.1.4.1.2606.7.4.3.2.1.1 |
cmcIIIMsgIndexIndex for the list of message entries. Its value ranges between 1 and the value of cmcIIINumberOfMsgs. Unsigned32 .1.3.6.1.4.1.2606.7.4.3.2.1.2 |
cmcIIIMsgTextText for each message (entry in the table)ro DisplayString .1.3.6.1.4.1.2606.7.4.3.2.1.3 |
cmcIIIMsgStatusActual message status 1: not available 2: configuration has changed (sensor new, changed, lost) 3: error 4: OK 5: alarm, e.g. smoke, vibration... 6: warning of analog value, value reached high warning threshold 7: analog value too low, value reached low threshold (Alarm) 8: analog value too high, value reached high threshold (Alarm) 9: warning of analog value, value reached low warning threshold 10: output is set to OFF 11: output is set to ON 12: door is open 13: door is closed 14: door is locked 15: door is unlocked by remote input, e.g. external card reader 16: door is unlocked by reader or keypad connected 17: door is unlocked by SNMP set command 18: door is unlocked by WEB 19: door is unlocked by timer 20: no access, wrong key code or card number 21: orientation of PSM unit is circuit 1 22: orientation of PSM unit is circuit 2 23: battery low, wireless sensor 24: sensor cable broken 25: sensor cable short 26: sensor calibration in progress 27: sensor is inactive 28: sensor is active 29: no Power (PSM)ro Enumeration .1.3.6.1.4.1.2606.7.4.3.2.1.4 |
cmcIIIMsgRelaySetup of Alarm relay for this message/alarm 1: no switching of alarm relay 2: switching of alarm relayrw Enumeration .1.3.6.1.4.1.2606.7.4.3.2.1.5 |
cmcIIIMsgBeeperSetup of Alarm beeper for this alarm 1: no audible alarm 2: audible alarmrw Enumeration .1.3.6.1.4.1.2606.7.4.3.2.1.6 |
cmcIIIMsgTrapEach bit is representing an entry of cmcIIITrapReceiverTable. If the corresponding cmcIIITrapReceiverStatus is enabled setting this bit enables sending messages to this receiver.rw Bits .1.3.6.1.4.1.2606.7.4.3.2.1.7 |
cmcIIIMsgSMTPEach bit is representing an entry of cmcIIISmtpReceiverTable. If the corresponding cmcIIISmtpReceiverStatus is enabled setting this bit enables sending messages to this receiver.rw Bits .1.3.6.1.4.1.2606.7.4.3.2.1.8 |
cmcIIIMsgSMSEach bit is representing an entry of cmcIIISmsReceiverTable. If the corresponding cmcIIISmsReceiverStatus is enabled setting this bit enables sending messages to this receiver.rw Bits .1.3.6.1.4.1.2606.7.4.3.2.1.9 |
cmcIIIMsgQuitReset of this alarm 1: auto 2: manual, alarm needs confirmation, e. g. with 'C' keyrw Enumeration .1.3.6.1.4.1.2606.7.4.3.2.1.10 |
cmcIIIMsgDelayDelay of alarm conditionrw Unsigned32 .1.3.6.1.4.1.2606.7.4.3.2.1.11 |
cmcIIIMsgSchedAlarmOffAlarm condition disabled by schedulerrw Integer32 .1.3.6.1.4.1.2606.7.4.3.2.1.12 |
cmcIIIMsgQualityQuality of variablero Enumeration .1.3.6.1.4.1.2606.7.4.3.2.1.13 |
cmcIIIMsgVarIdxIndex of variable 'Status' in variable table generating this messagero Integer32 .1.3.6.1.4.1.2606.7.4.3.2.1.14 |
cmcIIIMsgVarValueIdxIndex of variable 'Value' in the variable tablerw Integer32 .1.3.6.1.4.1.2606.7.4.3.2.1.15 |
cmcIIIMsgStatusTextMessage status textro DisplayString .1.3.6.1.4.1.2606.7.4.3.2.1.16 |
cmcIIIControl OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.5 |
cmcIIIQuitUnitCommand to quit (acknowledge) alarms of CMCIII unit. Setting to 'quit' (2) will have same result as pressing 'C' on CMCIII. Variable is automatically set back to 'noQuit' (1).rw Enumeration .1.3.6.1.4.1.2606.7.5.1 |
cmcIIISmsQueueFast track to send a SMS message based on configuration of cmcIIISetupSMS. Message format: MessageText TabulatorAsSeparator ReceiverPhoneNumber e.g.: Hello World!\t0123456789rw DisplayString .1.3.6.1.4.1.2606.7.5.2 |
cmcIIIConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.6 |
cmcIIIMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.6.1 |
cmcIIIMibComplianceThe core compliance statement for all cmcIII implementations. Unknown .1.3.6.1.4.1.2606.7.6.1.1 |
cmcIIIMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2606.7.6.2 |
cmcIIITrapGroupConformance group for objects contained in cmcIII notifications. Unknown .1.3.6.1.4.1.2606.7.6.2.1 |
cmcIIINotificationGroupThe cmcIII MIB notification group. Unknown .1.3.6.1.4.1.2606.7.6.2.2 |
cmcIIIInfoMibGroupConformance group for all cmcIII base information. Unknown .1.3.6.1.4.1.2606.7.6.2.3 |
cmcIIISetupMibGroupConformance group for default cmcIII setup operations. Unknown .1.3.6.1.4.1.2606.7.6.2.4 |
cmcIIIDeviceMibGroupConformance group for all cmcIII device information. Unknown .1.3.6.1.4.1.2606.7.6.2.5 |
cmcIIIControlMibGroupConformance group for all cmcIII control operations. Unknown .1.3.6.1.4.1.2606.7.6.2.6 |
cmcIIIRelayMibGroupConformance group for cmcIII relay and beeper operations. Unknown .1.3.6.1.4.1.2606.7.6.2.7 |
cmcIIISmsMibGroupConformance group for cmcIII SMS operations. Unknown .1.3.6.1.4.1.2606.7.6.2.8 |
cmcIIISmtpMibGroupConformance group for cmcIII SMTP operations. Unknown .1.3.6.1.4.1.2606.7.6.2.9 |
cmcIIISyslogMibGroupConformance group for cmcIII syslog operations. Unknown .1.3.6.1.4.1.2606.7.6.2.10 |
cmcIIITimerMibGroupConformance group for cmcIII timer operations. Unknown .1.3.6.1.4.1.2606.7.6.2.11 |
cmcIIILdapMibGroupConformance group for cmcIII LDAP operations. Unknown .1.3.6.1.4.1.2606.7.6.2.12 |
cmcIIINtpMibGroupConformance group for cmcIII NTP operations. Unknown .1.3.6.1.4.1.2606.7.6.2.13 |