REDSTONE-ACCOUNTING-MIB
AI MIB Summary
The REDSTONE-ACCOUNTING-MIB provides enterprise-specific SNMP access to Redstone Communications Inc. hardware for tracking network usage statistics, including session durations, data transfer volumes, and user activity logs. This module enables the collection of billing and traffic accounting metrics required for service level monitoring and resource utilization analysis on Redstone network infrastructure.
The accounting MIB for the Redstone Communications Inc. enterprise.
Main OID:
rsAcctngMIB.1.3.6.1.4.1.2773.2.24
22
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
rsAcctngMIBThe accounting MIB for the
Redstone Communications Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.2773.2.24 |
rsAcctngMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.24.1 |
rsAcctngSelectionControl OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.24.1.1 |
rsAcctngSelectionTableA list of accounting information selection entries.
Note that additions, modifications and deletions of entries
in this table can occur at any time, but such changes only
take effect on the next occasion when collection begins into
a new file. Thus, between modification and the next 'swap',
the content of this table does not reflect the current
selection. SEQUENCE OF RsAcctngSelectionEntry .1.3.6.1.4.1.2773.2.24.1.1.1 |
rsAcctngSelectionEntryAn entry used to extend the the selection entry in
acctngSelectionEntry. This conceptual row extension is
used for Redstone accounting extensions for connectionless
data collection. RsAcctngSelectionEntry .1.3.6.1.4.1.2773.2.24.1.1.1.1 |
rsAcctngSelectionTypeIndicates the types of connections for which the
information selected by this entry are to be collected.
The ietfAccountControl(0) bit position indicates that the
acctngSelectionType in the base conceptual row determines
the selection type. All other bit positions for this object
over-ride the acctngSelectionType in the base conceptual
row.rw Bits .1.3.6.1.4.1.2773.2.24.1.1.1.1.1 |
rsAcctngSelectionModeIndicates the data collection mode.rw Enumeration .1.3.6.1.4.1.2773.2.24.1.1.1.1.2 |
rsAcctngFileControl OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.24.1.2 |
rsAcctngFileTableA unique value identifying the file transfer behavior
and the the file to where accounting data is to be stored. SEQUENCE OF RsAcctngFileEntry .1.3.6.1.4.1.2773.2.24.1.2.1 |
rsAcctngFileEntryAn entry used to extend the file management of
acctngFileEntry. This conceptual row extension is
used for Redstone accounting extensions to automate
the transfer of accounting data to remote hosts. RsAcctngFileEntry .1.3.6.1.4.1.2773.2.24.1.2.1.1 |
rsAcctngFileXferModeIndicates the mode to use for transfering accounting
data to remote client.
rsAcctngManualTransfer
Administrator is responsible for manually transfering
collected accounting data off of the system.
rsAcctngAutomatedTransfer
The agent will automatically transfer the collected
accounting data based at a rsAcctngFileXferIntervals
using an entry in the rsFileXferTable pointed to by
rsAcctngFileXferIndex. If a manager sets this object
to this value, a corresponding row in the rsFileXferTable
must exist, otherwise the set command will fail.
rsActngTransferOnFileFull
The agent will automatically transfer the collected
accounting data when the file reaches the maximum
size defined by acctngFileMaximumSize. If a manager sets
this object to this value, a corresponding row in the
rsFileXferTable must exist, otherwise the set command
will fail.
rsAcctngRedundantTransfer
The agent will automatically transfer two copies of the
accounting data based on the rsAcctngFileXferInterval.
One copy will go to the rsFileXferTable entry identified
by rsAcctngFileXferIndex and one copy will go the the
rsFileXferTable entry identified by rsAcctngFileXferSecondaryIndexrw Enumeration .1.3.6.1.4.1.2773.2.24.1.2.1.1.1 |
rsAcctngFileXferIndexIdentifies an entry in the rsFileXferTable, which defines
the file transfer parameters to use when the agent is
configured to automatically transfer collected accounting
data files. A set to this object will fail if a corresponding
entry in the rsFileXferTable does not exist or it is not
set to rsFileXferAcctngStatistics.rw INTEGER .1.3.6.1.4.1.2773.2.24.1.2.1.1.2 |
rsAcctngFileXferSecondaryIndexIdentifies a backup or secondary entry in the rsFileXferTable,
which defines the file transfer parameters to use when the agent is
configured to automatically transfer collected accounting
data files. A set to this object will fail if a corresponding
entry in the rsFileXferTable does not exist or it is not
set to rsFileXferAcctngStatistics.rw INTEGER .1.3.6.1.4.1.2773.2.24.1.2.1.1.3 |
rsAcctngInterfaceControl OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.24.1.3 |
rsAcctngInterfaceTableA table controlling the collection of accounting data on
specific interfaces types. This table provides an efficient
mechanism to enable and/or disable data collection on
all interfaces of a specified type. SEQUENCE OF RsAcctngInterfaceEntry .1.3.6.1.4.1.2773.2.24.1.3.1 |
rsAcctngInterfaceEntryAn entry which controls whether accounting data is to be
collected on interfaces of a specific type. RsAcctngInterfaceEntry .1.3.6.1.4.1.2773.2.24.1.3.1.1 |
rsAcctngInterfaceAdminStatusThe desired administrative state for accounting data
collection for interfaces defined by the type of this entry.
The administrative scope is for all interfaces of the type
defined by the corresponding rsIfType for this entry.rw RsAcctngAdminType (REDSTONE-TC) .1.3.6.1.4.1.2773.2.24.1.3.1.1.1 |
rsAcctngInterfaceOperStatusThe operational state for accounting data collection
on for all interfaces corresponding to this entries type.ro RsAcctngOperType (REDSTONE-TC) .1.3.6.1.4.1.2773.2.24.1.3.1.1.2 |
rsAcctngInterfaceRowStatusControls creation/deletion of entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2773.2.24.1.3.1.1.3 |
rsAcctngConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.24.3 |
rsAcctngGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.24.3.1 |
rsAcctngCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.24.3.2 |