REDSTONE-ATM-MIB
AI MIB Summary
The REDSTONE-ATM-MIB provides vendor-specific management interfaces for Redstone Communications ATM switches, enabling the monitoring of Asynchronous Transfer Mode cell traffic statistics, interface status, and virtual circuit configurations. This module facilitates the collection of standard ATM performance counters and error metrics required for troubleshooting and capacity planning within Redstone ATM network infrastructure.
The ATM MIB for the Redstone Communications Inc. enterprise.
Main OID:
rsAtmMIB.1.3.6.1.4.1.2773.2.8
48
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
rsAtmMIBThe ATM MIB for the Redstone Communications Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.2773.2.8 |
rsAtmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.8.1 |
rsAtmIfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.8.1.1 |
rsAtmNextIfIndexCoordinate ifIndex value allocation for entries in rsAtmIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro RsNextIfIndex (REDSTONE-TC) .1.3.6.1.4.1.2773.2.8.1.1.1 |
rsAtmIfTableThis table contains entries for ATM interfaces present in the system. SEQUENCE OF RsAtmIfEntry .1.3.6.1.4.1.2773.2.8.1.1.2 |
rsAtmIfEntryEach entry describes the characteristics of an ATM interface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/rsIfTable. RsAtmIfEntry .1.3.6.1.4.1.2773.2.8.1.1.2.1 |
rsAtmIfIndexThe ifIndex of the ATM interface. When creating entries in this table, suitable values for this object are determined by reading rsAtmNextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2773.2.8.1.1.2.1.1 |
rsAtmIfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: rsAtmIfRowStatus rsAtmIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for rsAtmIfIndex must have been determined previously, by reading rsAtmNextIfIndex. A corresponding entry in ifTable/ifXTable/rsIfTable is created/destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2773.2.8.1.1.2.1.2 |
rsAtmIfLowerIfIndexThe ifIndex of an interface over which this ATM interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2773.2.8.1.1.2.1.3 |
rsAtmIfIlmiVpiThe VPI of the Ilmi of a major ATM interface.rw Integer32 .1.3.6.1.4.1.2773.2.8.1.1.2.1.4 |
rsAtmIfIlmiVciThe VCI of the Ilmi of a major ATM interface.rw Integer32 .1.3.6.1.4.1.2773.2.8.1.1.2.1.5 |
rsAtmIfIlmiVcdAn integer identifier for the Ilmi, used in conjunction with the command-line interface. The value must be unique among VCs configured on the same ATM interface.rw Integer32 .1.3.6.1.4.1.2773.2.8.1.1.2.1.6 |
rsAtmIfIlmiPollFrequencyUse to set the Interim Local Management Interface (ILMI) keepalive timer. This value sets the allowable time between POLL PDU transmissions if there are no pending sequence data PDUs. Use the value 0 to disable ILMI keepalives.rw Integer32 .1.3.6.1.4.1.2773.2.8.1.1.2.1.7 |
rsAtmIfIlmiAdminStateThe administrative status of ILMI in the ATM interface.rw Enumeration .1.3.6.1.4.1.2773.2.8.1.1.2.1.8 |
rsAtmIfUniVersionUse to specify the User Network Interface (UNI) the router should use when ILMI link auto determination is unsuccesful or ILMI is disabled.rw Enumeration .1.3.6.1.4.1.2773.2.8.1.1.2.1.9 |
rsAtmAal5IfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.8.1.2 |
rsAtmAal5NextIfIndexCoordinate ifIndex value allocation for entries in rsAtmAal5IfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro RsNextIfIndex (REDSTONE-TC) .1.3.6.1.4.1.2773.2.8.1.2.1 |
rsAtmAal5IfTableThis table contains entries for ATM AAL5 interfaces present in the system. SEQUENCE OF RsAtmAal5IfEntry .1.3.6.1.4.1.2773.2.8.1.2.2 |
rsAtmAal5IfEntryEach entry describes the characteristics of an ATM AAL5 interface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/rsIfTable. RsAtmAal5IfEntry .1.3.6.1.4.1.2773.2.8.1.2.2.1 |
rsAtmAal5IfIndexThe ifIndex of the ATM AAL5 interface. When creating entries in this table, suitable values for this object are determined by reading rsAtmAal5NextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2773.2.8.1.2.2.1.1 |
rsAtmAal5IfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: rsAtmAal5IfRowStatus rsAtmAal5IfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for rsAtmAal5IfIndex must have been determined previously, by reading rsAtmAal5NextIfIndex. A corresponding entry in ifTable/ifXTable/rsIfTable is created/destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2773.2.8.1.2.2.1.2 |
rsAtmAal5IfLowerIfIndexThe ifIndex of an ATM interface over which this ATM AAL5 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2773.2.8.1.2.2.1.3 |
rsAtmSubIfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.8.1.3 |
rsAtmSubIfNextIfIndexCoordinate ifIndex value allocation for entries in rsAtmSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro RsNextIfIndex (REDSTONE-TC) .1.3.6.1.4.1.2773.2.8.1.3.1 |
rsAtmSubIfTableThis table contains entries for ATM Subinterfaces present in the system. SEQUENCE OF RsAtmSubIfEntry .1.3.6.1.4.1.2773.2.8.1.3.2 |
rsAtmSubIfEntryEach entry describes the characteristics of an ATM Subinterface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/rsIfTable. RsAtmSubIfEntry .1.3.6.1.4.1.2773.2.8.1.3.2.1 |
rsAtmSubIfIndexThe ifIndex of the ATM Subinterface. When creating entries in this table, suitable values for this object are determined by reading rsAtmSubNextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2773.2.8.1.3.2.1.1 |
rsAtmSubIfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: rsAtmSubIfRowStatus rsAtmSubIfLowerIndex In addition, when creating an entry the following conditions must hold: A value for rsAtmSubIfIndex must have been determined previously, by reading rsAtmSubIfNextIfIndex. A corresponding entry in ifTable/ifXTable/rsIfTable is created/destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2773.2.8.1.3.2.1.2 |
rsAtmSubIfDistinguisherAn integer identifier for the sub interface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among sub interfaces configured on the same underlying ATM adaptation layer. The upper bound for the value is further constrained to be identical with the maximum number of sub interfaces supported by the lower interface. If this object is not configured, a value will be allocated internally and can be queried after table entry creation has succeeded.rw Integer32 .1.3.6.1.4.1.2773.2.8.1.3.2.1.3 |
rsAtmSubIfLowerIfIndexThe ifIndex of an ATM AAL5 interface over which this ATM Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2773.2.8.1.3.2.1.4 |
rsAtmSubIfVccTableThis table contains entries for ATM VCCs configured on ATM Subinterfaces present in the system. An implementation may constrain the number of VCCs permitted to be configured per ATM Subinterface; in particular, an implementation may restrict each ATM Subinterface to have a single VCC. Attributes in this entry can only be configured at entry creation, and remain fixed for the lifetime of the entry. SEQUENCE OF RsAtmSubIfVccEntry .1.3.6.1.4.1.2773.2.8.1.3.3 |
rsAtmSubIfVccEntryEach entry describes the characteristics of an ATM Subinterface VCC. RsAtmSubIfVccEntry .1.3.6.1.4.1.2773.2.8.1.3.3.1 |
rsAtmSubIfVccVpiThe VPI of the ATM VCC used by this subinterface. Integer32 .1.3.6.1.4.1.2773.2.8.1.3.3.1.1 |
rsAtmSubIfVccVciThe VCI of the ATM VCC used by this subinterface. Integer32 .1.3.6.1.4.1.2773.2.8.1.3.3.1.2 |
rsAtmSubIfVccRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: rsAtmSubIfVccRowStatus In addition, when creating an entry the following conditions must hold: The ATM Subinterface identified by rsAtmSubIfIndex must exist. A positive value configured for rsAtmSubIfVccVcd must not already be assigned to an existing VCC. For each value of rsAtmSubIfVccServiceCategory, additional dependent objects in the entry require configuration as identified here: rsAtmSubIfVccServiceCategory Requires configuration of: ------------------------------------------------------------ ubr <none> ubrPcr rsAtmSubIfVccPcr nrtVbr rsAtmSubIfVccPcr rsAtmSubIfVccScr rsAtmSubIfVccMbs ------------------------------------------------------------ Attributes in this entry can only be configured at entry creation, and remain fixed for the lifetime of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2773.2.8.1.3.3.1.3 |
rsAtmSubIfVccVcdAn integer identifier for the circuit, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among VCCs configured on the same underlying ATM interface. The upper bound for the value is further constrained to be identical with the maximum number of VCCs supported by the underlying ATM interface. If this object is not configured, or is configured with a value of zero, a value will be allocated internally and can be queried after table entry creation has succeeded.rw Integer32 .1.3.6.1.4.1.2773.2.8.1.3.3.1.4 |
rsAtmSubIfVccTypeSpecifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM.rw Enumeration .1.3.6.1.4.1.2773.2.8.1.3.3.1.5 |
rsAtmSubIfVccServiceCategoryService category for this circuit: ubr Unspecified bit rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-realtime Variable Bit Rate.rw Enumeration .1.3.6.1.4.1.2773.2.8.1.3.3.1.6 |
rsAtmSubIfVccPcrPeak Cell Rate, in cells per second, of this circuit. This parameter is only required when rsAtmSubIfVccServiceCategory is configured to have one of the following values: ubrPcr nrtVbrrw Integer32 UNITS "cells per second" .1.3.6.1.4.1.2773.2.8.1.3.3.1.7 |
rsAtmSubIfVccScrSustained Cell Rate, in cells per second, of this circuit. This parameter is only required when rsAtmSubIfVccServiceCategory is configured to have one of the following values: nrtVbrrw Integer32 UNITS "cells per second" .1.3.6.1.4.1.2773.2.8.1.3.3.1.8 |
rsAtmSubIfVccMbsMaximum Burst Size, in cells, of this circuit. This parameter is only required when rsAtmSubIfVccServiceCategory is configured to have one of the following values: nrtVbrrw Integer32 UNITS "cells" .1.3.6.1.4.1.2773.2.8.1.3.3.1.9 |
rsAtmConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.8.4 |
rsAtmCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.8.4.1 |
rsAtmComplianceThe compliance statement for entities which implement the Redstone ATM MIB. Unknown .1.3.6.1.4.1.2773.2.8.4.1.1 |
rsAtmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.8.4.2 |
rsAtmGroupA collection of objects providing management of ATM interfaces in a Redstone product. Unknown .1.3.6.1.4.1.2773.2.8.4.2.1 |
rsAtmAal5GroupA collection of objects providing management of AAL5 interfaces in a Redstone product. Unknown .1.3.6.1.4.1.2773.2.8.4.2.2 |
rsAtmSubIfGroupA collection of objects providing management of ATM subinterfaces in a Redstone product. Unknown .1.3.6.1.4.1.2773.2.8.4.2.3 |